Dynamic Transformation of Nano-MoS2 in a Soil-Plant System Empowers Its Multifunctionality on Soybean Growth.

Molybdenum disulfide (nano-MoS2) nanomaterials have shown great potential for biomedical and catalytic applications due to their unique enzyme-mimicking properties. However, their potential agricultural applications have been largely unexplored. A key factor prior to the application of nano-MoS2 in agriculture is understanding its behavior in a complex soil-plant system, particularly in terms of its transformation. Here, we investigate the distribution and transformation of two types of nano-MoS2 (MoS2 nanoparticles and MoS2 nanosheets) in a soil-soybean system through a combination of synchrotron radiation-based X-ray absorption near-edge spectroscopy (XANES) and single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS). We found that MoS2 nanoparticles (NPs) transform dynamically in soil and plant tissues, releasing molybdenum (Mo) and sulfur (S) that can be incorporated gradually into the key enzymes involved in nitrogen metabolism and the antioxidant system, while the rest remain intact and act as nanozymes. Notably, there is 247.9 mg/kg of organic Mo in the nodule, while there is only 49.9 mg/kg of MoS2 NPs. This study demonstrates that it is the transformation that leads to the multifunctionality of MoS2, which can improve the biological nitrogen fixation (BNF) and growth. Therefore, MoS2 NPs enable a 30% increase in yield compared to the traditional molybdenum fertilizer (Na2MoO4). Excessive transformation of MoS2 nanosheets (NS) leads to the overaccumulation of Mo and sulfate in the plant, which damages the nodule function and yield. The study highlights the importance of understanding the transformation of nanomaterials for agricultural applications in future studies.

Nickel Oxide Nanoparticles Improve Soybean Yield and Enhance Nitrogen Assimilation.

Nickel (Ni) is a trace element beneficial for plant growth and development and could improve crop yield by stimulating urea decomposition and nitrogen-fixing enzyme activity. A full life cycle study was conducted to compare the long-term effects of soil-applied NiO nanoparticles (n-NiO), NiO bulk (b-NiO), and NiSO4 at 10-200 mg kg-1 on plant growth and nutritional content of soybean. n-NiO at 50 mg kg-1 significantly promoted the seed yield by 39%. Only 50 mg kg-1 n-NiO promoted total fatty acid content and starch content by 28 and 19%, respectively. The increased yield and nutrition could be attributed to the regulatory effects of n-NiO, including photosynthesis, mineral homeostasis, phytohormone, and nitrogen metabolism. Furthermore, n-NiO maintained a Ni2+ supply for more extended periods than NiSO4, reducing potential phytotoxicity concerns. Single-particle inductively coupled plasma mass spectrometry (sp-ICP-MS) for the first time confirmed that the majority of the Ni in seeds is in ionic form, with only 28-34% as n-NiO. These findings deepen our understanding of the potential of nanoscale and non-nanoscale Ni to accumulate and translocate in soybean, as well as the long-term fate of these materials in agricultural soils as a strategy for nanoenabled agriculture.

Safety Assessment of Nanomaterials for Antimicrobial Applications.

The interplay between nanotechnology and pathogens offers a new quest to fight against human infections. Inspiring from their unique thermal, magnetic, optical, or redox potentials, numerous nanomaterials have been employed for bacterial theranostics. The past decade has seen dramatic progress in the development of various nanoantimicrobials, which demands more focus on their safety assessment. The present review critically discusses the toxicity of nanoantimicrobials and the role of key features, including composition, size, surface charge, loading capability, hydrophobicity/philicity, precise release, and functionalization, that can contribute to modulating the effects on microbes. Moreover, how differences in microbe's structure, biofilm formation, persistence cells, and intracellular pathogens bestow resistance or sensitivity toward nanoantimicrobials is broadly investigated. In extension, the most important types of nanoantimicrobial with clinical prospective and their safety assessment are summarized, and finally, based on available evidence, an insight of the principles in designing safer nanoantimicrobials for overcoming pathogens and future challenges in the field is provided.

Physiological and biochemical response of wheat (Triticum aestivum) to TiO2 nanoparticles in phosphorous amended soil: A full life cycle study.

Nanoparticles (NPs) application in soil as nano-fertilizers to increase crop yield is getting attention due to their higher efficiency and less environmental risks. This study investigated the interactive effects of variable titanium dioxide nanoparticles (TiO2-NPs) levels (0, 30, 50 and 100 mg kg-1) superimposed to phosphorus (P) fertilizer application in soil at the rates of 0, 25 and 50 mg kg-1 on wheat crop. Physiological parameters of plants, their antioxidant enzymes activities (SOD, POD), and contents of crude protein, H2O2, MDA and metals/nutrients (Al, Ca, Mg, Fe, Zn and Cu) were measured. Data on physiological traits revealed that application of 50 mg kg-1 of TiO2-NPs without P fertilizer significantly enhanced the root and shoot length by 63 and 26%, respectively. Increased contents of nutrients in the shoots, viz., Ca (316%), Cu (296%), Al (171%) and Mg (187%) with 50 mg kg-1 TiO2-NPs treatment reflected improvement in crop growth and grain quality. Furthermore, P contents in plant tissues were raised up to 56% with 50 mg kg-1 of TiO2-NPs even in the absence of P fertilizer. In the soil, concentration of phytoavailable P was significantly increased up to 63.3% in the presence of 50 mg kg-1 TiO2-NPs as compared to control. Contents of crude protein in grain were also enhanced by 22.8% (at P50) and 17.4% (at P25) with 50 mg kg-1 TiO2-NPs application. Along with P application, TiO2-NPs triggered the activities of SOD (2.06-33.97%) and POD (up to 13.19%), and H2O2 production (50.6-138.8%). However, MDA contents were not elevated significantly at any level of TiO2-NPs, and remained at par with control. It was noteworthy that highest level of TiO2-NPs, viz., 100 mg kg-1 exhibited plant and nutrients response lower than that with 50 mg kg-1. Further, TiO2-NPs triggered the bioavailability of micronutrient heavy metals (Zn, Cu and Fe) and Al, which could have toxicity at higher concentrations. These results suggested that TiO2-NPs might have some affinities with phosphate compounds and metal ions in the soil to bring them in soluble form, which enhanced their bioavailability. Although it improved the crop yield and quality, but toxic or negative impact of TiO2-NPs was also apparent at higher dose. Therefore, investigations on the potential interactions of NPs with other nutrients and toxic metals are needed to enhance our understanding for the safer application of nano-fertilizer.

Engineered nanomaterials inhibit Podosphaera pannosa infection on rose leaves by regulating phytohormones.

In the present study, we investigated the antifungal effects of engineered nanomaterials (ENMs) against Podosphaera pannosa (P. pannosa), a fungal pathogen that causes powdery mildew on plants in the rose family. Four commercial ENMs, including multi-wall carbon nanotubes (MWCNTs), reduced graphene oxide (rGO), copper oxide (CuO) nanoparticles (NPs) and titanium dioxide (TiO2) NPs, were used to prepare 50 or 200 mg/L NP suspensions in deionized water. Rose leaves in water-agar plates were sprayed by different ENM suspensions mixed with P. pannosa conidia. After a 19-day standard infection test, the growth of P. pannosa on rose leaves was evaluated. All four ENMs inhibited infection by P. pannosa at the concentration 200 mg/L, whereas only CuO NPs decreased fungal growth at 50 mg/L. The phytohormone content of the leaves was measured across all treatments to investigate potential ENMs antifungal mechanisms. The results suggest that ENMs increased plant resistance to fungal infection by altering the content of endogenous hormones, particularly zeatin riboside (ZR). Our study demonstrates that ENMs exhibited distinctly antifungal effects against P. pannosa on roses, and could be utilized as a novel plant protection strategy after a comprehensive assessment of potential environmental risk.

Effect of metal oxide nanoparticles on amino acids in wheat grains (Triticum aestivum) in a life cycle study.

Engineered nanoparticles (NPs) are now used as additives in pesticides and fungicides and as novel fertilizers in agriculture so there is an urgent need to explore their effects on crop yield and quality in a full life cycle study. In the present study, three widely used NPs (TiO2, Fe2O3 and CuO NPs applied at doses of 50 and 500 mg/kg) were selected to investigate their long-term impact on wheat growth. TiO2 NPs did not affect the growth and development of wheat, but Fe2O3 NPs promoted wheat precocity and CuO NPs inhibited the growth and development of the wheat grains. The Cu content in grains treated with CuO NP increased by 18.84%-30.45% compared with the control. However, the contents of Fe and Zn were both significantly lower in the CuO NP treatments. Univariate and multivariate analyses were used to analyze the effect of different NPs on the composition of amino acids in wheat grains. Exposure to TiO2 NPs at dose of 500 mg/kg increased the overall amino acid nutrition in the edible portion of wheat. Fe2O3 NPs at both doses increased the contents of cysteine (Cys) and tyrosine (Tyr). The addition of CuO NPs reduced the level of some essential amino acids in wheat grains, isoleucine (Ile), leucine (Leu), threonine (Thr) and histidine (His). Overall, evaluation of the potential impacts of metal-based NPs on the nutritional quality of wheat grains could provide important information for their safe use when incorporated into agrichemicals in sustainable agriculture.

Comparative effects of nano and bulk-Fe3O4 on the growth of cucumber (Cucumis sativus).

Cucumber (Cucumis sativus) plants were cultivated in hydroponic media with nano and bulk- iron oxide (Fe3O4) (50, 500 and 2000 mg/L) over a period of 21 days. At the low concentration (50 mg/L), nano-Fe3O4 resulted in reduction of biomass and enzyme activities compared to the control. However, at the higher concentration of nano-Fe3O4 dosage (2000 mg/L), there was a significant increase in biomass, antioxidant enzymes superoxide dismutase (SOD) and peroxidase (POD). In contrary, the high concentration of bulk-Fe3O4 caused phytotoxicity in terms of biomass and enzymes activity. The phytotoxicity was dependent on the particles property (mainly sizes and aggregation) for nano-F3O4 and concentration dependent for bulk-Fe3O4. The particle size is an important factor that can influence the bioavailability of nanomaterials, which need to be included when evaluating the exposure of nanomaterials and their deleterious effects in the environment. These promising results can help to develop the possible application of Fe3O4 NPs which may improve nutrient management to overcome food security.

Uptake, transport, distribution and Bio-effects of SiO2 nanoparticles in Bt-transgenic cotton.

BACKGROUND: SiO2 nanoparticle is one of the most popular nanomaterial which has been used in various fields, such as wastewater treatment, environmental remediation, food processing, industrial and household applications, biomedicine, disease labeling, and biosensor, etc. In agriculture, the use of SiO2 nanoparticles as insecticide, carriers in drug delivery, or in uptake and translocation of nutrient elements, etc., has been given attention. However, the effects of nanoparticles on plants have been seldom studied. In this work, the toxicity of SiO2 nanoparticles and their uptake, transport, distribution and bio-effects have been investigated in Bt-transgenic cotton. METHODS: The phytotoxic effects of SiO2 nanoparticles were exhibited in Bt-transgenic cotton with different SiO2 concentrations of 0, 10, 100, 500 and 2000 mg.L(-1) for 3 weeks through dry biomasses, nutrient elements, xylem sap, enzymes activities, and hormone concentrations. The uptake and distribution of nanoparticles by the plants were confirmed using transmission electron microscopy (TEM). RESULTS: The SiO2 nanoparticles decreased significantly the plant height, shoot and root biomasses; the SiO2 nanoparticles also affected the contents of Cu, Mg in shoots and Na in roots of transgenic cotton; and SOD activity and IAA concentration were significantly influenced by SiO2 nanoparticles. In addition, SiO2 nanoparticles were present in the xylem sap and roots as examined by TEM showing that the SiO2 nanoparticles were transported from roots to shoots via xylem sap. CONCLUSIONS: This is the first report of the transportation of SiO2 nanoparticles via xylem sap within Bt-transgenic cotton. This study provides direct evidence for the bioaccumulation of SiO2 nanoparticles in plants, which shows the potential risks of SiO2 nanoparticles impact on food crops and human health.

[Application of ICP-mS and AFS to detecting heavy metals in phosphorus fertilizers].

In order to investigate heavy metals in phosphorus fertilizers in China, 159 samples of phosphorus fertilizers including imported fertilizers and domestic fertilizers were collected from fertilizer markets, and the contents of heavy metals were determined by ICP-MS and AFS after microwave digestion. The results showed that the phosphorous fertilizers contained certain amount of heavy metals, and there was great variability in the contents of heavy metals. The mean contents of Cd, Cu, Zn, Cr, Pb, Ni, As and Hg were 0. 77, 35.6, 102.7, 24. 1, 16.6, 15.4, 19.4 and 0. 08 mg kg-1 fertilizer, respectively; based on the calculation of P2O5, the mean contents of above heavy metals were 4. 48, 258. 4, 767. 4, 190. 0, 151.3, 134. 5, 155. 8 and 8. 79 mg kg-1 P2 O5, respectively. The contents of heavy metals Cd, Cr, Pb, As and Hg in the tested samples accord with the ecological index of arsenic, cadmium, lead, chromium and mercury for fertilizers (GB/T 23349-2009), with the exception of Cd in one imported sample of diammonium phosphate and As in one sample of mono-ammonium phosphate. Analyzing the contents of heavy metals in imported fertilizers, the Cd contents in imported fertilizers was ranged from 0. 02 to 27. 2 mg kg-1 fertilizer, the mean and median Cd contents in imported fertilizers were 3. 20 and 0. 41 mg kg-1 fertilizer, respectively. And the Cu, Cr and Hg contents in the imported fertilizers were higher than that of domestic fertilizers, the mean contents of Cu, Cr and Hg in imported fertilizers were 39. 4, 26. 6 and 0. 47 mg kg-1 fertilizer, respectively.

Microplastic-mediated environmental behavior of metal contaminants: mechanism and implication.

Microplastics (MPs) and metals are currently two of the most concerning environmental pollutants due to their persistent nature and potential threats to ecosystems and human health. This review examines the intricate interactions between MPs and metals in diverse environmental compartments, including aquatic, terrestrial, and atmospheric environments by focusing on the complex processes of adsorption and desorption and the mechanisms that govern these interactions. MPs act as carriers and concentrators of metals in aquatic and terrestrial environments, affecting the bioavailability and toxicity of these contaminants to aquatic and terrestrial organisms. This review highlights the existing challenges and constraints associated with current analytical methods, including microscopy, spectroscopy, and isotherm models in studying microplastic-heavy metal interactions. Moreover, we identified the knowledge gaps and future research directions that can enhance our understanding of the dynamic interplay between MPs and metals in various environmental settings.

Insights into the effect of manganese-based nanomaterials on the distribution trait and nutrition of radish (Raphanus sativus L.).

Manganese (Mn) is one of the essential elements for plant growth and is involved in the process of photosynthesis and seed germination. Herein, we applied two Mn-based nanoparticles, MnO2 and Mn3O4, to the soil to investigate their effects on radish growth, antioxidant system, and nutrients. The radish plant height after treatment with 10 mg/kg of MnO2 and Mn3O4 NPs were increased, compare to the control. In radish's shoot, MnO2 NPs at high concentrations (100 mg/kg) increased MDA activity by 58 % compared to the control group, while exposure to Mn3O4 NPs at the same concentration decreased MDA activity by 14 %. The nutrient content of radishes, such as soluble sugar and vitamin C, was improved. Moreover, single particle inductively coupled plasma mass spectrometry (SP ICP-MS) was used to understand the patterns of migration of Mn-based NPs in radish and subsequent impact on nutrients. We found that Mn-based NPs accumulated mainly in the roots of radish. Interestingly, the accumulation characteristics of MnO2 NPs and Mn3O4 NPs were different. MnO2 NPs accumulated more in radish leaves than in fruits, while the accumulation of Mn3O4 NPs gradually decreased from roots to leaves. Finally, we determined the mineral element content of the leaves, fruits, and roots of radish, and found that the uptake of main metallic mineral elements (e.g. Cu, Fe, Mg, Zn, Na, K) was inhibited by the application of Mn-based NPs. These findings underscore the importance of considering species and multifaceted impacts of Mn-based NPs as nanofertilizers for their wide application in agriculture.

Harnessing synergy: Integrating agricultural waste and nanomaterials for enhanced sustainability.

This paper aims to explore the cooperative use of agricultural waste and nanomaterials to improve environmental sustainability. The introduction highlights global environmental challenges and the objectives of integrating the two are highlighted. Valorization of agricultural waste is considered to reduce waste generation, while nanomaterials act as conversion catalysts that help to increase the efficiency of waste conversion and environmental remediation. In addition, synergistic approaches are discussed, including the combination of agricultural waste and nanomaterials, as well as the concept of enhanced resource management. The paper also presents case studies that demonstrate the success of such synergistic applications in pollution control and environmental remediation. Despite the challenges and risks, this approach can provide new ways to create more sustainable and resilient environments through the integration of resources, interdisciplinary cooperation and policy support.

The combination of nanotechnology and potassium: applications in agriculture.

Potassium fertilizer is indispensable for ensuring crop production, which in turn supports global food supply and safe farming practices. Potassium resources are primarily located in the Northern Hemisphere, leading to a current shortage of affordable potash and severe soil deficiencies in certain regions of the Southern Hemisphere. There is a shift away from mined salts in favor of locally available potassium resources. Utilizing potassium-rich silicates, for instance, could be a viable option to address this situation. The imperative of enhancing crop productivity and quality necessitates either increasing potassium availability or utilizing potassium more efficiently. Geneticists may find the development of plants that use potassium more effectively to be a valuable pursuit. Nanomaterials are increasingly becoming part of people's professional lives as a novel material category. This technology is gradually finding applications in agriculture to boost crop yields while reducing environmental pollution. This paper reviews the applications of common potassium-containing materials, explores the effects and mechanisms of nano-fertilizers on plants, and offers insights into future applications of nano-potassium fertilizers in agriculture. All in all, the application of nanotechnology in the production and utilization of potassium fertilizers is both necessary and effective. However, there are still many gaps in the current field of nano-potassium fertilizer application that require further research. It is hoped that this review can serve as a valuable reference for researchers working in this field.

Co-exposure to tire wear particles and nickel inhibits mung bean yield by reducing nutrient uptake.

Soil and terrestrial contamination with microplastics and nanoplastics has been discussed extensively, while tire wear particles (TWPs) have been largely overlooked. We investigated the root-surface interactions and growth response of mung bean (Vigna radiata L.) plants exposed to tire wear particles (TWPs) (0.05, 0.1, and 0.25% w/w) and nickel sulfate (50 and 100 mg kg-1 NiSO4) alone and in co-exposure scenarios for the full life cycle (105 days) under soil conditions. The results show that TWPs adhered to the root surface and reduced the water and nutrient uptake by the plant, particularly at higher concentrations of TWPs (0.25% w/w), without any observed organic contaminant accumulation in the root tissue. TWPs alone at 0.01, 0.1, and 0.25% (w/w) decreased mung bean yield by 11, 28, and 52%, respectively. Co-exposure to TWPs at 0.01, 0.1 and 0.25% w/w with 100 mg kg-1 NiSO4 decreased yield by 73, 79 and 88%, respectively. However, co-exposure to TWPs at 0.01 and 0.1% w/w with 50 mg kg-1 NiSO4 enhanced the yield by 32% and 7%, respectively. These changes in yield and nutritional aspects appear to be linked to Ni's regulatory influence on mineral homeostasis. Moreover, exposure to NiSO4 at 100 mg kg-1 increased Ni uptake in the root, shoot, and grain by 9, 26, and 20-fold, respectively as compared to the unamended control; this corresponded to increased antioxidant enzyme activity (10-127%) as compared to the control. TWPs caused blockages, significantly reducing plant yield and altering nutrient dynamics, highlighting emerging risks to plant health.

Cryptic footprint of thallium in soil-plant systems; A review.

The current review highlights the complex behavior of thallium (Tl) in soil and plant systems, offering insight into its hazardous characteristics and far-reaching implications. The research investigates the many sources of Tl, from its natural existence in the earth crust to its increased release through anthropogenic activities such as industrial operations and mining. Soil emerges as a significant reservoir of Tl, with diverse physicochemical variables influencing bioavailability and entrance into the food chain, notably in Brassicaceae family members. Additionally, the study highlights a critical knowledge gap concerning Tl influence on legumes (e.g., soybean), underlining the pressing demand for additional studies in this crucial sector. Despite the importance of leguminous crops in the world food supply and soil fertility, the possible impacts of Tl on these crops have received little attention. As we traverse the ecological complexity of Tl, this review advocates the collaborative research efforts to eliminate crucial gaps and provide solutions for reducing Tl detrimental impacts on soil and plant systems. This effort intends to pave the path for sustainable agricultural practices by emphasizing the creation of Tl-tolerant legume varieties and revealing the complicated dynamics of Tl-plant interactions, assuring the long-term durability of our food systems against the danger of Tl toxicity.

Investigation of the effects and mechanisms of manganese-based NMs on rice growth.

Manganese-based (Mn-based) nanomaterials (NMs) have great potential as alternatives to conventional Mn fertilizers. Yet, its environmental risks and effects on plant growth are not completely well understood. This study investigated the physiological effects of manganese dioxide (MnO2) and manganese tetroxide (Mn3O4) NMs on inter-root exposure (0-500 mg/L) of hydroponically grown rice. The results showed that on inter-root exposure, 50 mg/L Mn-based NMs promoted the uptake of mineral elements and enhanced the enzymatic activities of antioxidant systems (CAT and SOD) in rice, whereas 500 mg/L Mn3O4 NMs disrupted the mineral element homeostasis and led to phytotoxicity. The promotion effect of MnO2 NMs was better, firstly because MnO2 NMs treatment had lower Mn content in the plant than Mn3O4 NMs. In addition, MnO2 NMs are more transported and absorbed in the plant in ionic form, while Mn3O4 NMs exist in granular form. MnO2 NMs and Mn3O4 NMs both can be used as nano-fertilizers to improve the growth of rice by inter-root application, but the doses should be carefully selected.

Unlocking the potential of nanoscale sulfur in sustainable agriculture.

The global population is growing rapidly, which poses a significant challenge to food security. Innovation in agricultural technologies is necessary to achieve sustainable development in agriculture and combat food insecurity. Nanotechnology has emerged as a promising tool in agriculture; compared to conventional agricultural chemicals, demonstrated benefits include increased efficiency of delivery and utilization of both nutrients and pesticides, as well as nanoscale-specific stimulation of stress tolerance pathways. Among the many studied nanomaterials, nano-sulfur has demonstrated superior effects at enhancing plant resilience to pathogens and abiotic stresses, as well as improving plant growth and nutritional quality of edible tissues. A number of published studies have investigated the physiological effects (growth promotion, disease resistance) of single or several sulfur and sulfide compounds on crop species. However, there is no systematic analysis of this literature, including the effects and specific mechanisms of various sulfur forms in agricultural applications. In this review, we will discuss the effects of sulfur (including nano-sulfur) on crop species, the underlying mechanisms of action for their transport and transformation in the soil-plant system, and evaluate their suitability in sustainable agricultural development. Additionally, we discuss the current challenges and knowledge gaps for nanoscale sulfur use in agriculture, and describe future research directions to advance our understanding of the sustainable use of this material at the scale of individual fields.

[Nitrogen status diagnosis and yield prediction of spring maize after green manure incorporation by using a digital camera].

In order to explore the feasibility of using the image processing technology to diagnose the nitrogen status and to predict the maize yield, a field experiment with different nitrogen rates with green manure incorporation was conducted. Maize canopy digital images over a range of growth stages were captured by digital camera. Maize nitrogen status and the relationships between image color indices derived by digital camera for maize at different growth stages and maize nitrogen status indicators were analyzed. These digital camera sourced image color indices at different growth stages for maize were also regressed with maize grain yield at maturity. The results showed that the plant nitrogen status for maize was improved by green manure application. The leaf chlorophyll content (SPAD value), aboveground biomass and nitrogen uptake for green manure treatments at different maize growth stages were all higher than that for chemical fertilization treatments. The correlations between spectral indices with plant nitrogen indicators for maize affected by green manure application were weaker than that affected by chemical fertilization. And the correlation coefficients for green manure application were ranged with the maize growth stages changes. The best spectral indices for diagnosis of plant nitrogen status after green manure incorporation were normalized blue value (B/(R+G+B)) at 12-leaf (V12) stage and normalized red value (R/(R+G+B)) at grain-filling (R4) stage individually. The coefficients of determination based on linear regression were 0. 45 and 0. 46 for B/(R+G+B) at V12 stage and R/(R+G+B) at R4 stage respectively, acting as a predictor of maize yield response to nitrogen affected by green manure incorporation. Our findings suggested that digital image technique could be a potential tool for in-season prediction of the nitrogen status and grain yield for maize after green manure incorporation when the suitable growth stages and spectral indices for diagnosis were selected.

AgNPs-Triggered Seed Metabolic and Transcriptional Reprogramming Enhanced Rice Salt Tolerance and Blast Resistance.

Seeds are facing harsher environments due to the changing climate. Improving seeds' stress resilience is critical to reduce yield loss. Here, we propose that using ROS-generating nanoparticles (NPs) to prestimulate seeds would enhance the stress resilience of seeds and seedlings through triggering stress/immune responses. We examined this hypothesis by exposing AgNPs-primed rice (Oryza sativa L.) seeds under salt conditions (NaCl). The results showed that primed seeds exhibit accelerated germination speed, increased seedling vigor (from 22.5 to 47.6), biomass (11%), and root length (83%) compared to seeds with hydropriming treatment. Multiomics (metabolomics and transcriptomics) analyses reveal that AgNPs-priming triggered metabolic and transcriptional reprogramming in rice seeds. Signaling metabolites, such as salicylic acid, niacinamide, and glycerol-3-phosphate, dramatically increased upon AgNPs-priming. KEGG pathway analysis reveals that AgNPs-priming activated stress signaling and defense related pathways, such as plant hormone signal transduction, glutathione metabolism, flavone and flavonol biosynthesis, MAPK signaling pathway, and plant-pathogen interaction. These metabolic and transcriptional changes indicate that AgNPs-priming triggered stress/immune responses. More importantly, this "stress memory" can last weeks, providing protection to rice seedlings against salt stress and rice blast fungus (Magnaporthe oryzae). Overall, we show that prestimulated seeds with ROS-generating AgNPs not only enable faster and better germination under stress conditions, but also increase seedling resistance to biotic and abiotic stresses. This simple nanobiostimulant-based strategy may contribute to sustainable agriculture by maintaining agricultural production and reducing the use of pesticides.

Recent Trends in Foliar Nanofertilizers: A Review.

It is estimated that 40-70%, 80-90% and 50-90% of the conventional macronutrients N, P and K applied to the soil are lost, respectively, resulting in considerable loss of resources. Compared to conventional fertilizers, nanofertilizers have the advantages of controlled release, high nutrient utilization, low cost and relatively low environmental pollution due to their small size (1-100 nm) and high specific surface area. The application of nanofertilizers is an up-and-coming field of agricultural research and is an attractive and economical substitute for common fertilizers which can boost global food productivity sustainably. Foliar fertilization is a popular way to satisfy the needs of higher plants. Because of its small application dose, faster nutrient uptake than soil application and relatively less environmental pollution, foliar fertilization is more popular among plants. It can be seen that nanofertilizers and foliar fertilization are the hotspots of attention at present and that current research on the foliar application of nanofertilizers is not as extensive as that on soil application. Based on this background, this paper provides an overview of various applications of foliar spraying of nanofertilizers in agriculture, including applications in improving crop yield and quality as well as mitigating heavy metal stress, salt stress and drought stress.