Photo-illuminated diamond as a solid-state source of solvated electrons in water for nitrogen reduction.

The photocatalytic reduction of N2 to NH3 is typically hampered by poor binding of N2 to catalytic materials and by the very high energy of the intermediates involved in this reaction. Solvated electrons directly introduced into the reactant solution can provide an alternative pathway to overcome such limitations. Here we demonstrate that illuminated hydrogen-terminated diamond yields facile electron emission into water, thus inducing reduction of N2 to NH3 at ambient temperature and pressure. Transient absorption measurements at 632 nm reveal the presence of solvated electrons adjacent to the diamond after photoexcitation. Experiments using inexpensive synthetic diamond samples and diamond powder show that photocatalytic activity is strongly dependent on the surface termination and correlates with the production of solvated electrons. The use of diamond to eject electrons into a reactant liquid represents a new paradigm for photocatalytic reduction, bringing electrons directly to reactants without requiring molecular adsorption to the surface.

Hafnium sulfate prenucleation clusters and the Hf(18) polyoxometalate red herring.

In prior studies, aqueous Hf sulfate-peroxide solutions were spin-coated, dehydrated, patterned by electron-beam lithography, ion-exchanged (OH(-) for SO4(2-)), and finally converted to HfO2 hard masks via annealing. The atomic-level details of the underlying aqueous chemistries of these processes are complex and yet to be understood. Yet a thorough understanding of this specific chemical system will inspire development of design rules for other aqueous-precursor-to-solid-state metal oxide systems. Often-observed crystallization of the Hf18 polyoxometalate from aqueous Hf sulfate-peroxide precursor solutions has led us to believe that Hf18 may represent an important intermediate step in this process. However, via detailed solution studies described here (small-angle X-ray scattering, electrospray ionization mass spectrometry, and Raman spectroscopy), we ascertained that Hf18 is in fact not a prenucleation cluster of Hf sulfate coatings. Rather, the Hf tetramers, pentamers, and hexamers that are the core building blocks of Hf18 are robustly persistent over variable compositions and aging time of precursor solutions, and therefore they are likely the rudimentary building blocks of the deposited thin-film materials. These Hf clusters are capped and linked by sulfate and peroxide anions in solution, which probably prevents crystallization of Hf18 during the rapid dehydration process of spin-coating. In fact, crystallization of Hf18 from the amorphous gel coating would be detrimental to formation of a high-density conformal coating that we obtain from precursor solutions. Therefore, this study revealed that the well-known Hf18 polyoxometalate is not likely to be an important intermediate in the thin-film process. However, its subunits are, confirming the universal importance of deriving information from the solid state, albeit judiciously and critically, to understand the solution state.

Conformational disorder enhances electron transfer through alkyl monolayers: ferrocene on conductive diamond.

We have investigated the electron-transfer kinetics of ferrocene groups covalently tethered to surfaces of conductive diamond electrodes. Electrochemical measurements show that the rates are only weakly dependent on chain length but are strongly dependent on the surface coverage; these observations are contrary to what is commonly observed for self-assembled monolayers on gold, pointing to important mechanistic differences in electron transfer processes on covalently bonded materials. Molecular dynamics simulations show that dependence on chain length and molecular density can be readily explained in terms of dynamic crowding effects. At low coverage, conformational flexibility of surface-tethered alkyl chains allows the redox-active ferrocene group to dynamically approach the diamond surface, leading to facile electron transfer for all surface molecules. As the coverage is increased, steric crowding causes the average ferrocene-to-surface distance to increase, decreasing the electron transfer rate. Even at the most dense packings, the mismatch between the spacing of surface lattice sites and the optimum alkyl chain density leads to voids and inherent disorder that facilitates electron transfer. These results are significant in the design and optimization of electrocatalytically active surfaces on covalently bonded materials relevant for electro- and photocatalysis.

Modular synthesis of alkyne-substituted ruthenium polypyridyl complexes suitable for "click" coupling.

A modular synthetic method has been developed for the preparation of Ru polypyridyl complexes bearing a terminal alkyne. This method proceeds through a readily accessible intermediate with a silyl-protected alkyne and allows access to a variety of five- and six-coordinate Ru complexes. These complexes can be easily attached to azide-functionalized electrode surfaces with only slight perturbation of the redox properties of the parent complex.

Electronic structure of Fe- vs. Ru-based dye molecules.

In order to explore whether Ru can be replaced by inexpensive Fe in dye molecules for solar cells, the differences in the electronic structure of Fe- and Ru-based dyes are investigated by X-ray absorption spectroscopy and first-principles calculations. Molecules with the metal in a sixfold, octahedral N cage, such as tris(bipyridines) and tris(phenanthrolines), exhibit a systematic downward shift of the N 1s-to-π* transition when Ru is replaced by Fe. This shift is explained by an extra transfer of negative charge from the metal to the N ligands in the case of Fe, which reduces the binding energy of the N 1s core level. The C 1s-to-π* transitions show the opposite trend, with an increase in the transition energy when replacing Ru by Fe. Molecules with the metal in a fourfold, planar N cage (porphyrins) exhibit a more complex behavior due to a subtle competition between the crystal field, axial ligands, and the 2+ vs. 3+ oxidation states.

Covalent attachment of catalyst molecules to conductive diamond: CO2 reduction using "smart" electrodes.

We report here covalent attachment of a catalytically active cobalt complex onto boron-doped, p-type conductive diamond. Peripheral acetylene groups were appended on a cobalt porphyrin complex, and azide-alkyne cycloaddition was used for covalent linking to a diamond surface decorated with alkyl azides. The functionalized surface was characterized by X-ray photoelectron spectroscopy and Fourier transform IR spectroscopy, and the catalytic activity was characterized using cyclic voltammetry and FTIR. The catalyst-modified diamond surfaces were used as "smart" electrodes exhibiting good stability and electrocatalytic activity for electrochemical reduction of CO(2) to CO in acetonitrile solution.

Molecular adsorption on ZnO(1010) single-crystal surfaces: morphology and charge transfer.

While ZnO has excellent electrical properties, it has not been widely used for dye-sensitized solar cells, in part because ZnO is chemically less stable than widely used TiO(2). The functional groups typically used for surface passivation and for attaching dye molecules either bind weakly or etch the ZnO surface. We have compared the formation of molecular layers from alkane molecules with terminal carboxylic acid, alcohol, amine, phosphonic acid, or thiol functional groups on single-crystal zinc oxide (1010) surfaces. Atomic force microscopy (AFM) images show that alkyl carboxylic acids etch the surface whereas alkyl amine and alkyl alcohols bind only weakly on the ZnO(1010) surface. Phosphonic acid-terminated molecules were found to bind to the surface in a heterogeneous manner, forming clusters of molecules. Alkanethiols were found to bind to the surface, forming highly uniform monolayers with some etching detected after long immersion times in an alkanethiol solution. Monolayers of hexadecylphosphonic acid and octadecanethiol were further analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. AFM scratching shows that thiols were bound strongly to the ZnO surface, suggesting the formation of strong Zn-S covalent bonds. Surprisingly, the tridentate phosphonic acids adhered much more weakly than the monodentate thiol. The influence of organic grafting on the charge transfer to ZnO was studied by time-resolved surface photovoltage measurements and electrochemical impedance measurements. Our results show that the grafting of thiols to ZnO leads to robust surfaces and reduces the surface band bending due to midgap surface states.

Highly stable redox-active molecular layers by covalent grafting to conductive diamond.

We demonstrate a modular "click"-based functionalization scheme that allows inexpensive conductive diamond samples to serve as an ultrastable platform for surface-tethered electrochemically active molecules stable out to ∼1.3 V vs Ag/AgCl. We have cycled surface-tethered Ru(tpy)(2) to this potential more than 1 million times with little or no degradation in propylene carbonate and only slightly reduced stability in water and acetonitrile.

Formation of smooth, conformal molecular layers on ZnO surfaces via photochemical grafting.

We have investigated the photochemical grafting of organic alkenes to atomically flat ZnO(10 ̅10) single crystals and ZnO nanorods as a way to produce functional molecule-semiconductor interfaces. Atomic force microscopy shows that photochemical grafting produces highly conformal, smooth molecular layers with no detectable changes in the underlying structure of the ZnO terraces or steps. X-ray photoelectron spectroscopy measurements show that grafting of a methyl ester-terminated alkene terminates near one monolayer, while alkenes bearing a trifluoroacetamide-protected amine form very smooth multilayers. Even with multilayers, it is possible to deprotect the amines and to link a second molecule to the surface with excellent efficiency and without significant loss of molecules from the surface. This demonstrates that the use of photochemical grafting, even in the case of multilayer formation, enables multistep chemical processes to be conducted on the ZnO surface. Photoresponse measurements demonstrate that functionalization of the surface does not affect the ability to induce field effects in the underlying ZnO, thereby suggesting that this approach to functionalization may be useful for applications in sensing and in hybrid organic-inorganic transistors and related devices.

Formation of molecular monolayers on TiO2 surfaces: a surface analogue of the Williamson ether synthesis.

Strategies to modify metal oxide surfaces are important because of the increasing applications of metal oxides in catalysis, sensing, electronics, and renewable energy. Here, we report the formation of molecular monolayers on anatase nanocrystalline TiO(2) surfaces at near-ambient temperatures by a simple one-step immersion. This is achieved by an analogue of the Williamson ether synthesis, in which the hydroxyl groups of the TiO(2) surface react with iodo-alkane molecules to release HI and form a Ti-O-C surface linkage. The grafted molecules were characterized by Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to confirm the formation of covalently bonded monolayers. Kinetic studies yielded an activation barrier of ∼59 kJ/mol for the grafting reaction. Measurements of hydrolytic stability of the grafted molecules in water show that approximately half the molecules are removed within minutes to hours at temperatures of 25-100 °C with an activation energy of ∼82 kJ/mol, while the remaining molecules are stable for much longer periods of time. These different stabilities are discussed in terms of the different types of Ti-O-C bonds that can form on TiO(2) surfaces.

UV-induced grafting of alkenes to silicon surfaces: photoemission versus excitons.

The mechanism of photochemical grafting of alkenes to H-terminated silicon has remained poorly understood. Here we demonstrate the importance of a previously unrecognized initiation process, photoelectron ejection (photoemission), as a facile way of initiating photochemical grafting of liquid alkenes to silicon surfaces when using ultraviolet light. A comparison of Si samples with vastly different photocarrier lifetimes showed no difference in the efficiency of alkene grafting. However, differences in the reactivities of different alkenes with different terminal groups that correlate with the electron affinities of these groups were observed. Our results indicate that photoemission is an effective way of initiating grafting because the irreversible nature of photoemission leaves the sample with a net excess of holes that have no corresponding electrons with which to recombine, while in a competing exciton mechanism, the net concentration of holes is limited by recombination processes.

Evaluation of Gas Formation and Consumption Driven by Crossover Effect in High-Voltage Lithium-Ion Batteries with Ni-Rich NMC Cathodes.

Gas formation during lithium-ion battery (LIB) cycling impacts the stability and safety of these batteries, especially for those containing Ni-rich NMC cathodes. In this paper, the cycling performance and gassing behavior of NMC811/graphite full cells with 4.2 and 4.4 V upper cutoff voltages were first compared. Cells with a 4.2 V upper cutoff voltage had good cycling stability, exhibiting a capacity retention of 96.8% after 100 cycles and generated little gas. On the other hand, cells with a 4.4 V upper cutoff voltage lost over 25% of initial capacity after 100 cycles and generated large amounts of gas in the first 10 cycles. Electrochemical cycling of anode and cathode symmetric cells was implemented to isolate gases formed at the electrode. Gas chromatography-mass spectrometry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning transmission electron microscopy were used to characterize the gas formation and associated material surfaces and structural properties. It was found that CO2 and fluorinated alkanes were the dominant gases evolved on the cathode side during cycling to 4.4 V. Gas crossover to the anode led to the depletion of gaseous products, which stabilized the cell performance to some extent. However, the growing surface reconstruction layer at the cathode, the thickening of the solid electrolyte interphase layer at the anode, and the gradual depletion of lithium inventory collectively contributed to the continuous capacity loss of full cells cycled to 4.4 V.

Chemical Evolution in Silicon-Graphite Composite Anodes Investigated by Vibrational Spectroscopy.

Silicon-graphite composites are under development for the next generation of high-capacity lithium-ion anodes, and vibrational spectroscopy is a powerful tool to identify the different mechanisms that contribute to performance loss. With alloy anodes, the underlying causes of cell failure are significantly different in half-cells with lithium metal counter electrodes compared to full cells with standard cathodes. However, most studies which take advantage of vibrational spectroscopy have only examined half-cells. In this work, a combination of FTIR and Raman spectroscopy describes several factors that lead to degradation in full pouch cells with LiNi0.5Mn0.3Co0.2O2 (NMC532) cathodes. The spectroscopic signatures evolve after longer term cycling compared to the initial formation cycles. Several side-reactions that consume lithium ions have clear FTIR signatures, and comparison to a library of reference compounds facilitates identification. Raman microspectroscopy combined with mapping shows that the composite anodes are not homogeneous but segregate into graphite-rich and silicon-rich phases. Lithiation does not proceed uniformly either. A basis analysis of Raman maps identifies electrochemically inactive regions of the anodes. The spectroscopic results presented here emphasize the importance of improving electrode processing and SEI stability to enable practical composite anodes with high silicon loadings.

Electrolyte Solvation Structure at Solid-Liquid Interface Probed by Nanogap Surface-Enhanced Raman Spectroscopy.

Understanding the fundamental factors that drive ion solvation structure and transport is key to design high-performance, stable battery electrolytes. Reversible ion solvation and desolvation are critical to the interfacial charge-transfer process across the solid-liquid interface as well as the resulting stability of the solid electrolyte interphase. Herein, we report the study of Li+ salt solvation structure in aprotic solution in the immediate vicinity (∼20 nm) of the solid electrode-liquid interface using surface-enhanced Raman spectroscopy (SERS) from a gold nanoparticle (Au NP) monolayer. The plasmonic coupling between Au NPs produces strong electromagnetic field enhancement in the gap region, leading to a 5 orders of magnitude increase in Raman intensity for electrolyte components and their mixtures namely, lithium hexafluorophosphate, fluoroethylene carbonate, ethylene carbonate, and diethyl carbonate. Further, we estimate and compare the lithium-ion solvation number derived from SERS, standard Raman spectroscopy, and Fourier transform infrared spectroscopy experiments to monitor and ascertain the changes in the solvation shell diameter in the confined nanogap region where there is maximum enhancement of the electric field. Our findings provide a multimodal spectroscopic approach to gain fundamental insights into the molecular structure of the electrolyte at the solid-liquid interface.

High Areal Capacity Si/LiCoO2 Batteries from Electrospun Composite Fiber Mats.

Freestanding nanofiber mat Li-ion battery anodes containing Si nanoparticles, carbon black, and poly(acrylic acid) (Si/C/PAA) are prepared using electrospinning. The mats are compacted to a high fiber volume fraction (≈0.85), and interfiber contacts are welded by exposing the mat to methanol vapor. A compacted+welded fiber mat anode containing 40 wt % Si exhibits high capacities of 1484 mA h g-1 (3500 mA h g-1Si ) at 0.1 C and 489 mA h g-1 at 1 C and good cycling stability (e.g., 73 % capacity retention over 50 cycles). Post-mortem analysis of the fiber mats shows that the overall electrode structure is preserved during cycling. Whereas many nanostructured Si anodes are hindered by their low active material loadings and densities, thick, densely packed Si/C/PAA fiber mat anodes reported here have high areal and volumetric capacities (e.g., 4.5 mA h cm-2 and 750 mA h cm-3 , respectively). A full cell containing an electrospun Si/C/PAA anode and electrospun LiCoO2 -based cathode has a high specific energy density of 270 Wh kg-1 . The excellent performance of the electrospun Si/C/PAA fiber mat anodes is attributed to the: i) PAA binder, which interacts with the SiOx surface of Si nanoparticles and ii) high material loading, high fiber volume fraction, and welded interfiber contacts of the electrospun mats.

Controlled formation of mixed nanoscale domains of high capacity Fe2O3-FeF3 conversion compounds by direct fluorination.

We report a direct fluorination method under fluorine gas atmosphere using a fluidized bed reactor for converting nanophase iron oxide (n-Fe2O3) to an electrochemically stable and higher energy density iron oxyfluoride/fluoride phase. Interestingly, no noticeable bulk iron oxyfluoride phase (FeOF) phase was observed even at fluorination temperature close to 300 °C. Instead, at fluorination temperatures below 250 °C, scanning transmission electron microscopy coupled with electron energy loss spectroscopy (STEM-EELS) and X-ray photoelectron spectroscopy (XPS) analysis showed surface fluorination with nominal composition, Fe2O3-xF2x (x < 1). At fluorination temperatures of 275 °C, STEM-EELS results showed porous interconnected nanodomains of FeF3 and Fe2O3 coexisting within the same particle, and overall the particles become less dense after fluorination. We performed potentiometric intermittent titration and electrochemical impedance spectroscopy studies to understand the lithium diffusion (or apparent diffusion) in both the oxyfluoride and mixed phase FeF3 + Fe2O3 composition, and correlate the results to their electrochemical performance. Further, we analyze from a thermodynamical perspective, the observed formation of the majority fluoride phase (77% FeF3) and the absence of the expected oxyfluoride phase based on the relative formation energies of oxide, fluoride, and oxyfluorides.

Chemical and structural investigation of high-resolution patterning with HafSO(x).

High-resolution transmission electron microscopy (TEM) imaging and energy-dispersive X-ray spectroscopy (EDS) chemical mapping have been used to examine key processing steps that enable sub-20-nm lithographic patterning of the material Hf(OH)4-2x-2y(O2)x(SO4)y·qH2O (HafSOx). Results reveal that blanket films are smooth and chemically homogeneous. Upon exposure with an electron beam, the films become insoluble in aqueous tetramethylammonium hydroxide [TMAH(aq)]. The mobility of sulfate in the exposed films, however, remains high, because it is readily exchanged with hydroxide from the TMAH(aq) solution. Annealing the films after soaking in TMAH(aq) results in the formation of a dense hafnium hydroxide oxide material that can be converted to crystalline HfO2 with a high electron-beam dose. A series of 9 nm lines is written with variable spacing to investigate the cross-sectional shape of the patterned lines and the residual material found between them.

Modular "click" chemistry for electrochemically and photoelectrochemically active molecular interfaces to tin oxide surfaces.

We demonstrate the use of "click" chemistry to form electrochemically and photoelectrochemically active molecular interfaces to SnO(2) nanoparticle thin films. By using photochemical grafting to link a short-chain alcohol to the surface followed by conversion to a surface azide group, we enable use of the Cu(I)-catalyzed azide-alkyne [3 + 2] cycloaddition (CuAAC) reaction, a form of "click" chemistry, on metal oxide surfaces. Results are shown with three model compounds to test the surface chemistry and subsequent ability to achieve electrochemical and photoelectrochemical charge transfer. Surface-tethered ferrocene groups exhibit good electron-transfer characteristics with thermal rates estimated at >1000 s(-1). Time-resolved surface photovoltage measurements using a ruthenium terpyridyl coordination compound demonstrate photoelectron charge transfer on time scales of nanoseconds or less, limited by the laser pulse width. The results demonstrate that the CuAAC "click" reaction can be used to form electrochemically and photoelectrochemically active molecular interfaces to SnO(2) and other metal oxide semiconductors.