Shear Bond Strength of Zirconia to Titanium Implant Using Glass Bonding.

This study evaluated the shear bond strength of zirconia to titanium implant components using silica-based glasses and compared the strength with that of implant components bonded using a commercial resin cement. Forty cylindrical zirconia specimens and forty titanium disks (Grade IV) were divided equally into four groups, depending on the adhesive used: three different types of glasses (group G, group GI, group GIB) and a self-adhesive resin cement (group U200), which was used as a control. The shear bond strength was evaluated using a universal testing machine and failure mode was examined by optical microscope. Data was analyzed using One-way ANOVA with p-value <0.05, which was considered statistically significant. The shear bond strength of the three glass groups was significantly higher than that of group U200 (p<0.05). Failure mode in all groups was a combination of adhesive and cohesive modes. Shear bond strength of zirconia to titanium bonded using glasses was higher than that using self-adhesive resin cement.

Wide dynamic range high-speed three-dimensional quantitative OCT angiography with a hybrid-beam scan.

We demonstrate a novel hybrid-beam scanning-based quantitative optical coherence tomography angiography (OCTA) that provides high-speed wide dynamic range blood flow speed imaging. The hybrid-beam scanning scheme enables multiple OCTA image acquisitions with a wide range of multiple time intervals simultaneously providing wide dynamic range blood flow speed imaging independent of the blood vessel orientation, which was quantified over a speed range of 0.6∼104 mm/s through the blood flow phantom experiments. A fully automated high-speed hybrid-beam scanning-based quantitative OCTA system demonstrates visualization of blood flow speeds in various vessels from the main arteries to capillaries in a 4 mm×4 mm area (1024 A-lines × 512 B-scans) in vivo in 20 s, showing its potential as a useful imaging tool for various biomedical applications.

Wear Behavior of the Human Enamel Antagonist to Different Glazed Zirconia.

In this study, the wear behavior of glazed zirconia was investigated to the antagonist with human enamel after simulated mastication. Twenty Y-TZP specimens were divided into 4 groups: untreated zirconia (Z), glazed zirconia with IPS e.max Ceram (GZE), glazed zirconia with VITA AKZENT® Plus (GZV), and glazed zirconia with glass (GZG). Glazing glass was mainly composed of SiO2, B2O3, Al2O3, Na2O and K2O (nearly 91 wt%). The surface roughness of the specimens was evaluated using roughness profiler. The maxillary premolar teeth were selected as the antagonist. The wear of human enamel against human enamel was used as a control. Five-disc specimens per group were subjected to chewing stimulation CS-4 (SD Mechatronic GmbH, Germany) for 240,000 cycles against human enamel. The wear loss of antagonistic teeth was calculated using a three-dimensional profiling system and the volume loss of the tooth was scanned using a 3D scanner. 3D data obtained before and after testing were overlapped using 3D software (Dentacian Software, EZplant, Korea). The wear loss of glazed zirconia GZE, GZV and GZG groups showed significantly lower than that of human enamel. Whereas, the zirconia (Z) group exhibits significantly lower volume loss than glazed zirconia and enamel. These results show that the wear of the glazing glass is comparable to other commercial glazing materials. Glazing materials are both more susceptible to wear the antagonist relative to zirconia.

GPU-accelerated framework for intracoronary optical coherence tomography imaging at the push of a button.

Frequency domain optical coherence tomography (FD-OCT) has become one of the important clinical tools for intracoronary imaging to diagnose and monitor coronary artery disease, which has been one of the leading causes of death. To help more accurate diagnosis and monitoring of the disease, many researchers have recently worked on visualization of various coronary microscopic features including stent struts by constructing three-dimensional (3D) volumetric rendering from series of cross-sectional intracoronary FD-OCT images. In this paper, we present the first, to our knowledge, "push-of-a-button" graphics processing unit (GPU)-accelerated framework for intracoronary OCT imaging. Our framework visualizes 3D microstructures of the vessel wall with stent struts from raw binary OCT data acquired by the system digitizer as one seamless process. The framework reports the state-of-the-art performance; from raw OCT data, it takes 4.7 seconds to provide 3D visualization of a 5-cm-long coronary artery (of size 1600 samples x 1024 A-lines x 260 frames) with stent struts and detection of malapposition automatically at the single push of a button.