RESUMO
A major limitation preventing the use of surface-enhanced Raman scattering (SERS) in routine analyses is the signal variability due to the heterogeneity of metallic nanoparticles used as SERS substrates. This study aimed to robustly optimise a synthesis process of silver nanoparticles to improve the measured SERS signal repeatability and the protocol synthesis repeatability. The process is inspired by a chemical reduction method associated with microwave irradiation to guarantee better controlled and uniform heating. The innovative Quality by Design strategy was implemented to optimise the different parameters of the process. A preliminary investigation design was firstly carried out to evaluate the influence of four parameters selected by means of an Ishikawa diagram. The critical quality attributes were to maximise the intensity of the SERS response and minimise its variance. The reaction time, temperature and stirring speed are critical process parameters. These were optimised using an I-optimal design. A robust operating zone covering the optimal reaction conditions (3.36 min-130 °C-600 rpm) associated with a probability of success was modelled. Validation of this point confirmed the prediction with intra- and inter-batch variabilities of less than 15%. In conclusion, this study successfully optimised silver nanoparticles by a rapid, low cost and simple technique enhancing the quantitative perspectives of SERS.
RESUMO
Reversed-Phase Liquid Chromatography (RPLC) is a common liquid chromatographic mode used for the control of pharmaceutical compounds during their drug life cycle. Nevertheless, determining the optimal chromatographic conditions that enable this separation is time consuming and requires a lot of lab work. Quantitative Structure Retention Relationship models (QSRR) are helpful for doing this job with minimal time and cost expenditures by predicting retention times of known compounds without performing experiments. In the current work, several QSRR models were built and compared for their adequacy in predicting the retention times. The regression models were based on a combination of linear and non-linear algorithms such as Multiple Linear Regression, Support Vector Regression, Least Absolute Shrinkage and Selection Operator, Random Forest, and Gradient Boosted Regression. Models were built for five pH conditions, i.e., at pH 2.7, 3.5, 6.5, and 8.0. In the end, the model predictions were combined using stacking and the performances of all models were compared. The k-nearest neighbor-based application domain filter was established to assess the reliability of the prediction for further compound prioritization. Altogether, this study can be insightful for analytical chemists working with RPLC to begin with the computational prediction modeling such as QSRR to predict the separation of small molecules.
Assuntos
Cromatografia de Fase Reversa , Relação Quantitativa Estrutura-Atividade , Reprodutibilidade dos Testes , Cromatografia Líquida/métodos , Algoritmos , Cromatografia Líquida de Alta Pressão/métodosRESUMO
Previously, we introduced a novel one-class classification (OCC) concept for spectra. It uses as acceptance space for genuine spectra of the target chemical, a prediction band in the wavelengths' space. As a decision rule, test spectra falling substantially outside this band are rejected as noncomplying with the target, and their deviations are documented in the wavelengths' space. This band-based OCC concept was applied to smooth signals like near-infrared (NIR) spectra. A regression model based on a smoothed principal component (PC) representation of the training spectra was used to predict unseen trajectories of future spectra. The boundaries of the most central predicted trajectories were chosen as critical trajectories. We now propose a methodology to construct a similar band-based one-class classifier for Raman spectra, which are sharper and noisier than NIR spectra. The spectra are transformed by a composition of wavelet and principal component (wPC) expansions instead of just a PC expansion in the previous methodology for NIR spectra. Wavelets can capture sharp features of Raman signals and provide a framework to efficiently denoise them. A multinormal prediction model is then used to derive predictions of future wPC scores of unseen spectra. These predicted wPC scores are then backtransformed to obtain predictions of future trajectories of unseen spectra in the wavelengths' space, whose most central region defines the acceptance band or space. This band-based one-class classifier successfully classified the first derivatives of real pharmaceutical Raman spectra, while enjoying the advantage of documenting deviations from the critical trajectories in the wavelengths' space and hence is more interpretable.
Assuntos
Análise Espectral Raman , Análise Espectral Raman/métodosRESUMO
Almost 60% of commercialized pharmaceutical proteins are glycosylated. Glycosylation is considered a critical quality attribute, as it affects the stability, bioactivity and safety of proteins. Hence, the development of analytical methods to characterise the composition and structure of glycoproteins is crucial. Currently, existing methods are time-consuming, expensive, and require significant sample preparation steps, which can alter the robustness of the analyses. In this work, we suggest the use of a fast, direct, and simple Fourier transform infrared spectroscopy (FT-IR) combined with a chemometric strategy to address this challenge. In this context, a database of FT-IR spectra of glycoproteins was built, and the glycoproteins were characterised by reference methods (MALDI-TOF, LC-ESI-QTOF and LC-FLR-MS) to estimate the mass ratio between carbohydrates and proteins and determine the composition in monosaccharides. The FT-IR spectra were processed first by Partial Least Squares Regression (PLSR), one of the most used regression algorithms in spectroscopy and secondly by Support Vector Regression (SVR). SVR has emerged in recent years and is now considered a powerful alternative to PLSR, thanks to its ability to flexibly model nonlinear relationships. The results provide clear evidence of the efficiency of the combination of FT-IR spectroscopy, and SVR modelling to characterise glycosylation in therapeutic proteins. The SVR models showed better predictive performances than the PLSR models in terms of RMSECV, RMSEP, R2CV, R2Pred and RPD. This tool offers several potential applications, such as comparing the glycosylation of a biosimilar and the original molecule, monitoring batch-to-batch homogeneity, and in-process control.
Assuntos
Algoritmos , Glicosilação , Análise dos Mínimos Quadrados , Preparações Farmacêuticas , Espectroscopia de Infravermelho com Transformada de Fourier/métodosRESUMO
In the pharmaceutical field, and more precisely in quality control laboratories, robust liquid chromatographic methods are needed to separate and analyze mixtures of compounds. The development of such chromatographic methods for new mixtures can result in a long and tedious process even while using the design of experiments methodology. However, developments could be accelerated with the help of in silico screening. In this work, the usefulness of a strategy combining response surface methodology (RSM) followed by multicriteria decision analysis (MCDA) applied to predictions from a quantitative structure-retention relationship (QSRR) model is demonstrated. The developed strategy shows that selecting equations for the retention time prediction models based on the pKa of the compound allows flexibility in the models. The MCDA developed is shown to help to make decisions on different criteria while being robust to the user's decision on the weights for each criterion. This strategy is proposed for the screening phase of the method lifecycle. The strategy offers the possibility to the user to select chromatographic conditions based on multiple criteria without being too sensitive to the importance given to them. The conditions with the highest desirability are defined as the starting point for further optimization steps.
Assuntos
Cromatografia de Fase Reversa , Cromatografia Líquida de Alta Pressão/métodos , Cromatografia Líquida , Preparações FarmacêuticasRESUMO
Glycosylation is considered a critical quality attribute of therapeutic proteins as it affects their stability, bioactivity, and safety. Hence, the development of analytical methods able to characterize the composition and structure of glycoproteins is crucial. Existing methods are time consuming, expensive, and require significant sample preparation, which can alter the robustness of the analyses. In this context, we developed a fast, direct, and simple drop-coating deposition Raman imaging (DCDR) method combined with multivariate curve resolution alternating least square (MCR-ALS) to analyze glycosylation in monoclonal antibodies (mAbs). A database of hyperspectral Raman imaging data of glycoproteins was built, and the glycoproteins were characterized by LC-FLR-MS as a reference method to determine the composition in glycans and monosaccharides. The DCDR method was used and allowed the separation of excipient and protein by forming a "coffee ring". MCR-ALS analysis was performed to visualize the distribution of the compounds in the drop and to extract the pure spectral components. Further, the strategy of SVD-truncation was used to select the number of components to resolve by MCR-ALS. Raman spectra were processed by support vector regression (SVR). SVR models showed good predictive performance in terms of RMSECV, R2CV.
Assuntos
Antineoplásicos Imunológicos , Análise Espectral Raman , Anticorpos Monoclonais , Glicoproteínas , Glicosilação , Análise dos Mínimos Quadrados , Análise Multivariada , Análise Espectral Raman/métodosRESUMO
Vibrational spectroscopic techniques, i.e., attenuated total reflectance infrared (ATR-IR), near infrared spectroscopy (NIRS) and Raman spectroscopy (RS), coupled with Partial Least Squares Regression (PLSR), were evaluated as cost-effective label-free and reagent-free tools to monitor water content in Levulinic Acid/L-Proline (LALP) (2:1, mol/mol) Natural Deep Eutectic Solvent (NADES). ATR-IR delivered the best outcome of Root Mean Squared Error (RMSE) of Cross-Validation (CV) = 0.27% added water concentration, RMSE of Prediction (P) = 0.27% added water concentration and mean % relative error = 2.59%. Two NIRS instruments (benchtop and handheld) were also compared during the study, respectively yielding RMSECV = 0.35% added water concentration, RMSEP = 0.56% added water concentration and mean % relative error = 5.13% added water concentration, and RMECV = 0.36% added water concentration, RMSEP = 0.68% added water concentration and mean % relative error = 6.23%. RS analysis performed in quartz cuvettes enabled accurate water quantification with RMECV = 0.43% added water concentration, RMSEP = 0.67% added water concentration and mean % relative error = 6.75%. While the vibrational spectroscopic techniques studied have shown high performance in relation to reliable determination of water concentration, their accuracy is most likely related to their sensitivity to detect the LALP compounds in the NADES. For instance, whereas ATR-IR spectra display strong features from water, Levulinic Acid and L-Proline that contribute to the PLSR predictive models constructed, NIRS and RS spectra are respectively dominated by either water or LALP compounds, representing partial molecular information and moderate accuracy compared to ATR-IR. However, while ATR-IR instruments are common in chemistry and physics laboratories, making the technique readily transferable to water quantification in NADES, Raman spectroscopy offers promising potential for future development for in situ, sample withdrawal-free analysis for high throughput and online monitoring.
Assuntos
Solventes Eutéticos Profundos , Água , Análise dos Mínimos Quadrados , Prolina , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Espectroscopia de Luz Próxima ao Infravermelho/métodosRESUMO
Plant root-knot nematode (RKN) interaction studies are performed on several host plant models. Though RKN interact with trees, no perennial woody model has been explored so far. Here, we show that poplar (Populus tremula × P. alba) grown in vitro is susceptible to Meloidogyne incognita, allowing this nematode to penetrate, to induce feeding sites, and to successfully complete its life cycle. Quantitative reverse transcription-polymerase chain reaction analysis was performed to study changes in poplar gene expression in galls compared with noninfected roots. Three genes (expansin A, histone 3.1, and asparagine synthase), selected as gall development marker genes, followed, during poplar-nematode interaction, a similar expression pattern to what was described for other plant hosts. Downregulation of four genes implicated in the monolignol biosynthesis pathway was evidenced in galls, suggesting a shift in the phenolic profile within galls developed on poplar roots. Raman microspectroscopy demonstrated that cell walls of giant cells were not lignified but mainly composed of pectin and cellulose. The data presented here suggest that RKN exercise conserved strategies to reproduce and to invade perennial plant species and that poplar is a suitable model host to study specific traits of tree-nematode interactions.
Assuntos
Interações Hospedeiro-Patógeno , Doenças das Plantas/parasitologia , Populus/parasitologia , Tylenchoidea/fisiologia , Animais , Folhas de Planta/parasitologia , Raízes de Plantas/parasitologia , Populus/citologia , Tylenchoidea/citologia , Xilema/parasitologiaRESUMO
The process of developing new reversed-phase liquid chromatography methods can be both time-consuming and challenging. To meet this challenge, statistics-based strategies have emerged as cost-effective, efficient and flexible solutions. In the present study, we use a Bayesian response surface methodology, which takes advantage of the knowledge of the pKa values of the compounds present in the analyzed sample to model their retention behavior. A multi-criteria decision analysis (MCDA) was then developed to exploit the uncertainty information inherent in the model distributions. This strategic approach is designed to integrate seamlessly with quantitative structure retention relationship (QSRR) models, forming an initial in-silico screening phase. Of the two methods presented for MCDA, one showed promising results. The method development process was carried out with the optimization phase, generating a design space that corroborates the results of the selection phase.
Assuntos
Teorema de Bayes , Cromatografia de Fase Reversa , Simulação por Computador , Cromatografia de Fase Reversa/métodos , Incerteza , Relação Quantitativa Estrutura-Atividade , Técnicas de Apoio para a DecisãoRESUMO
Liposomes are very interesting drug delivery systems for pharmaceutical and therapeutic purposes. However, liposome sterilization as well as their industrial manufacturing remain challenging. Supercritical carbon dioxide is an innovative technology that can potentially overcome these limitations. The aim of this study was to optimize a one-step process for producing and sterilizing liposomes using supercritical CO2. For this purpose, a design of experiment was conducted. The analysis of the experimental design showed that the temperature is the most influential parameter to achieve the sterility assurance level (SAL) required for liposomes (≤10-6). Optimal conditions (80 °C, 240 bar, 30 min) were identified to obtain the fixed critical quality attributes of liposomes. The conditions for preparing and sterilizing empty liposomes of various compositions, as well as liposomes containing the poorly water-soluble drug budesonide, were validated. The results indicate that the liposomes have appropriate physicochemical characteristics for drug delivery, with a size of 200 nm or less and a PdI of 0.35 or less. Additionally, all liposome formulations demonstrated the required SAL and sterility at concentrations of 5 and 45 mM, with high encapsulation efficiency.
Assuntos
Infertilidade , Lipossomos , Humanos , Lipossomos/química , Dióxido de Carbono/química , Sistemas de Liberação de Medicamentos , EsterilizaçãoRESUMO
Portable near-infrared (NIR) spectrophotometers have emerged as valuable tools for identifying substandard and falsified pharmaceuticals (SFPs). Integration of these devices with chemometric and machine learning models enhances their ability to provide quantitative chemical insights. However, different NIR spectrophotometer models vary in resolution, sensitivity, and responses to environmental factors such as temperature and humidity, necessitating instrument-specific libraries that hinder the wider adoption of NIR technology. This study addresses these challenges and seeks to establish a robust approach to promote the use of NIR technology in post-market pharmaceutical analysis. We developed support vector machine and partial least squares regression models based on binary mixtures of lab-made ciprofloxacin and microcrystalline cellulose, then applied the models to ciprofloxacin dosage forms that were assayed with high performance liquid chromatography (HPLC). A receiver operating characteristic (ROC) analysis was performed to set spectrophotometer independent NIR metrics to evaluate ciprofloxacin dosage forms as "meets standard," "needs HPLC assay," or "fails standard." Over 200 ciprofloxacin tablets representing 50 different brands were evaluated using spectra acquired from three types of NIR spectrophotometer with 85% of the prediction agreeing with HPLC testing. This study shows that non-brand-specific predictive models can be applied across multiple spectrophotometers for rapid screening of the conformity of pharmaceutical active ingredients to regulatory standard.
Assuntos
Ciprofloxacina , Espectroscopia de Luz Próxima ao Infravermelho , Comprimidos , Ciprofloxacina/análise , Ciprofloxacina/química , Comprimidos/análise , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Espectroscopia de Luz Próxima ao Infravermelho/normas , Cromatografia Líquida de Alta Pressão/métodos , Calibragem , Análise dos Mínimos Quadrados , Máquina de Vetores de Suporte , Celulose/química , Celulose/análise , Medicamentos Falsificados/análiseRESUMO
Quantitative structure-retention relationship models (QSRR) have been utilized as an alternative to costly and time-consuming separation analyses and associated experiments for predicting retention time. However, achieving 100 % accuracy in retention prediction is unrealistic despite the existence of various tools and approaches. The limitations of vast data availability and time complexity hinder the use of most algorithms for retention prediction. Therefore, in this study, we examined and compared two approaches for modelling retention time using a dataset of small molecules with retention times obtained at multiple conditions, referred to as multi-targets (five pH levels: 2.7, 3.5, 5, 6.5, and 8 at gradient times of 20 min of mobile phase). The first approach involved developing separate models for predicting retention time at each condition (single-target approach), while the second approach aimed to learn a single model for predicting retention across all conditions simultaneously (multi-target approach). Our findings highlight the advantages of the multi-target approach over the single-target modelling approach. The multi-target models are more efficient in terms of size and learning speed compared to the single-target models. These retention prediction models offer two-fold benefits. Firstly, they enhance knowledge and understanding of retention times, identifying molecular descriptors that contribute to changes in retention behaviour under different pH conditions. Secondly, these approaches can be extended to address other multi-target property prediction problems, such as multi-quantitative structure Property(X) relationship studies (mt-QS(X)R).
RESUMO
Surface-enhanced Raman scattering (SERS) is a vibrational widely used technique thanks to its multiple advantages such as its high specificity and sensitivity. The Raman signal exaltation comes from the use of metallic nanoparticles (Nps) acting as antennas by amplifying the Raman scattering. Controlling the Nps synthesis is a major point for the implementation of SERS in routine analysis and especially in quantitative applications. Effectively, nature, size and shape of these Nps considerably influence the SERS response intensity and repeatability. The Lee-Meisel protocol is the most common synthesis route used by the SERS community due to the low cost, rapidity and ease of manufacturing. However, this process leads to a significant heterogeneity in terms of particle size and shape. In this context, this study aimed to synthesize repeatable and homogeneous silver nanoparticles (AgNps) by chemical reduction. The Quality by Design strategy from quality target product profile to early characterization design was considered to optimize this reaction. The first step of this strategy aimed to highlight critical parameters by the means of an early characterization design. Based on an Ishikawa diagram, five process parameters were studied: the reaction volume as categorical variable and the temperature, the time of reaction, the trisodium citrate concentration and pH as continuous variables. A D-Optimal design of 35 conditions was performed. Three critical quality attributes were selected to maximize the SERS intensity, minimize the variation coefficient on SERS intensities and the polydispersity index of the AgNps. Considering these factors, it appeared that concentration, pH and time of reaction were identified as having a critical impact on the Nps formation and can then be considered for the further optimization step.
Assuntos
Nanopartículas Metálicas , Nanopartículas Metálicas/química , Prata/química , Análise Espectral Raman/métodos , Tamanho da PartículaRESUMO
Ellagic acid is one of the most studied polyphenolic compounds due to its numerous promising therapeutic properties. However, this therapeutic potential remains difficult to exploit owing to its low solubility and low permeability, resulting in low oral bioavailability. In order to allow an effective therapeutic application of EA, it is therefore necessary to develop strategies that sufficiently enhance its solubility, dissolution rate and bioavailability. For this purpose, solid dispersions based on pre-selected polymers such as Eudragit® EPO, Soluplus® and Kollidon® VA 64, with 5% w/w ellagic acid loading were prepared by hot extrusion and characterized by X-ray diffraction, FTIR spectroscopy and in vitro dissolution tests in order to select the most suitable polymer for future investigations. The results showed that Eudragit® EPO was the most promising polymer for ellagic acid solid dispersions development because its extrudates allowed to obtain a solution supersaturated in ellagic acid that was stable for at least 90 min. Moreover, the resulting apparent solubility was 20 times higher than the actual solubility of ellagic acid. The extrudates also showed a high dissolution rate of ellagic acid (96.25% in 15 min), compared to the corresponding physical mixture (6.52% in 15 min) or the pure drug (1.56% in 15 min). Furthermore, increasing the loading rate of ellagic acid up to 12% in extrudates based on this polymer did not negatively influence its release profile through dissolution tests.
Assuntos
Ácido Elágico , Polímeros , Polímeros/química , Química Farmacêutica/métodos , Ácidos Polimetacrílicos/química , Solubilidade , Composição de Medicamentos/métodos , Temperatura Alta , Portadores de Fármacos/químicaRESUMO
Quality is one of the essential components of medicines and needs to be ensured to preserve the population's health. This can be achieved through post-marketing quality control of medicines and is one of the most important duties of national regulatory authorities. In collaboration with the Cameroonian National Drug Quality Control and Valuation Laboratory, the decision was made to initiate a prevalence study to assess the quality of antiinfective medicines in Cameroon. A total of 150 samples of ciprofloxacin tablets and 142 samples of metronidazole tablets were collected from 76 licensed pharmacies and 75 informal vendors in three cities in Cameroon using a random strategy wherever possible and a mystery shopper approach. Three tests were carried out on each of the samples. Visual inspection allowed to find two falsified samples (0.7%) due to lack of information about the manufacturing company, and five more samples (1.7%) were deemed to be substandard due to flaws in the product. An additional 13 samples (4.5%) failed disintegration testing, and six (2.1%) others failed high-performance liquid chromatography assay testing due to insufficient active pharmaceutical ingredient (API) content. All samples were found to contain some API. A prevalence of 7.9% substandard or falsified (SF) medicines was found. Moreover, the prevalence of outlets selling SF medicines was greater in the informal sector (26.7%) than in the formal sector (2.6%). Although the prevalence of SF medicines found was low, efforts need to be made by national regulatory authorities to monitor the pharmaceutical market more closely.
Assuntos
Medicamentos Falsificados , Medicamentos Fora do Padrão , Humanos , Metronidazol , Camarões , Ciprofloxacina , Prevalência , Cidades , Medicamentos Falsificados/análise , ComprimidosRESUMO
Near-infrared (NIR) spectroscopy is actually a well-established technique that demonstrates its performance in the frame of detection of poor-quality medicines. The use of low-cost handheld NIR spectrophotometers in low-resource contexts can allow an inexpensive and more rapid detection compared to laboratory methods. Considering these points, it was decided to develop, validate, and transfer methods for the quantification of ciprofloxacin and metronidazole tablet samples using a NIR handheld spectrophotometer in transmission mode (NIR-M-T1) coupled to chemometrics such as partial least squares regression (PLSR) algorithm. All of the models were validated with the total error approach using an accuracy profile as a decision tool, with ±10% specifications and a risk α set at 5%. Quantitative PLSR models were first validated in Belgium, which is a temperate oceanic climate zone. Second, they were transferred to Cameroon, a tropical climate zone, where issues regarding the prediction of new validation series with the initial models were highlighted. Two augmentation strategies were then envisaged to make the predictive models robust to environmental conditions, incorporating the potential variability linked to environmental effects in the initial calibration sets. The resulting models were then used for in-field analysis of ciprofloxacin and metronidazole tablet samples collected in three cities in Cameroon. The contents results obtained for each sample with the two strategies were close and not statistically different. Nevertheless, the first one is easier to implement and the second is the best regarding model diagnostic measures and accuracy profiles. Two samples were found to be noncompliant in terms of content, and these results were confirmed using high-performance liquid chromatography taken as the reference method.
Assuntos
Metronidazol , Espectroscopia de Luz Próxima ao Infravermelho , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Análise dos Mínimos Quadrados , Calibragem , Comprimidos , CiprofloxacinaRESUMO
The negative consequences of Substandard and falsified (SF) medicines are widely documented nowadays and there is still an urgent need to find them in more efficient ways. Several screening tools have been developed for this purpose recently. In this study, three screening tools were used on 292 samples of ciprofloxacin and metronidazole collected in Cameroon. Each sample was then analyzed by HPLC and disintegration tests. Seven additional samples from the nitro-imidazole (secnidazole, ornidazole, tinidazole) and the fluoroquinolone (levofloxacin, ofloxacin, norfloxacin, moxifloxacin) families were analyzed to mimic falsified medicines. Placebo samples that contained only inert excipients were also tested to mimic falsified samples without active pharmaceutical ingredient (API). The three screening tools implemented were: a simplified visual inspection checklist, a low-cost handheld near infrared (NIR) spectrophotometer and paper analytical devices (PADs). Overall, 61.1% of the samples that failed disintegration and assay tests also failed the visual inspection checklist test. For the handheld NIR, one-class classifier models were built to detect the presence of ciprofloxacin and metronidazole, respectively. The APIs were correctly identified in all the samples with sensitivities and specificities of 100%. However, the importance of a representative and up-to-date spectral database was underlined by comparing models built with different calibration set spanning different variability spaces. The PADs were used only on ciprofloxacin samples and detected the API in all samples in which the presence of ciprofloxacin was confirmed by HPLC. However, these PADs were not specific to ciprofloxacin since they reacted like ciprofloxacin to other fluoroquinolone compounds. The advantages and drawbacks of each screening tool were highlighted. They are promising means in the frame of early detection of SF medicines and they can increase the speed of decision about SF medicines in the context of pharmaceutical post-marketing surveillance.
Assuntos
Medicamentos Falsificados , Medicamentos Fora do Padrão , Humanos , Metronidazol , Ciprofloxacina , Levofloxacino , Vigilância de Produtos ComercializadosRESUMO
Quality control is a fundamental and critical activity in the pharmaceutical industry that guarantees the quality of medicines. QC analyses are currently performed using several well-known techniques, mainly liquid and gas chromatography. However, current trends are focused on the development of new techniques to reduce analysis time and cost, to improve the performances and decrease ecological footprint. In this context, analytical scientists developed and studied emerging technologies based on spectroscopy and chromatography. The present review aims to give an overview of the recent development of vibrational spectroscopy, supercritical fluid chromatography and multi-dimensional chromatography. Selected emerging techniques are discussed using SWOT analysis and published pharmaceutical QC applications are discussed.
Assuntos
Cromatografia com Fluido Supercrítico , Cromatografia com Fluido Supercrítico/métodos , Indústria Farmacêutica , Preparações Farmacêuticas , Controle de QualidadeRESUMO
There is a rising interest in the modeling and predicting of chromatographic retention. The progress towards more complex and comprehensive models emphasized the need for broad reliable datasets. The present dataset comprises small pharmaceutical compounds selected to cover a wide range in terms of physicochemical properties that are known to impact the retention in reversed-phase liquid chromatography. Moreover, this dataset was analyzed at five pH with two gradient slopes. It provides a reliable dataset with a diversity of conditions and compounds to support the building of new models. To enhance the robustness of the dataset, the compounds were injected individually, and each sequence of injections included a quality control sample. This unambiguous detection of each compound as well as a systematic analysis of a quality control sample ensured the quality of the reported retention times. Moreover, three different liquid chromatographic systems were used to increase the robustness of the dataset.
RESUMO
The ultimate goal of a one-class classifier like the "rigorous" soft independent modeling of class analogy (SIMCA) is to predict with a certain confidence probability, the conformity of future objects with a given reference class. However, the SIMCA model, as currently implemented often suffers from an undercoverage problem, meaning that its observed sensitivity often falls far below the desired theoretical confidence probability, hence undermining its intended use as a predictive tool. To overcome the issue, the most reported strategy in the literature, involves incrementing the nominal confidence probability until the desired sensitivity is obtained in cross-validation. This article proposes a statistical prediction interval-based strategy as an alternative strategy to properly overcome this undercoverage issue. The strategy uses the concept of predictive distributions sensu stricto to construct statistical prediction regions for the metrics. Firstly, a procedure based on goodness-of-fit criteria is used to select the best-fitting family of probability models for each metric or its monotonic transformation, among several plausible candidate families of right-skewed probability distributions for positive random variables, including the gamma and the lognormal families. Secondly, assuming the best-fitting distribution, a generalized linear model is fitted to each metric data using the Bayesian method. This method enables to conveniently estimate uncertainties about the parameters of the selected distribution. Propagating these uncertainties to the best-fitting probability model of the metric enables to derive its so-called posterior predictive distribution, which is then used to set its critical limit. Overall, the evaluation of the proposed approach on a diversity of real datasets shows that it yields unbiased and more accurate sensitivities than existing methods which are not based on predictive densities. It can even yield better specificities than the strategy that attempts to improve sensitivities of existing methods by "optimizing" the type 1 error, especially in low sample sizes' contexts.