RESUMO
Bioreactor scale-up is complicated by dynamic interactions between mixing, reaction, mass transfer, and biological phenomena, the effects of which are usually predicted with simple correlations or case-specific simulations. This two-part study investigated whether axial diffusion equations could be used to calculate mixing times and to model and characterize large-scale stirred bioreactors in a general and predictive manner without fitting the dispersion coefficient. In this first part, a resistances-in-series model analogous to basic heat transfer theory was developed to estimate the dispersion coefficient such that only available hydrodynamic numbers and literature data were needed in calculations. For model validation, over 800 previously published experimentally determined mixing times were predicted with the transient axial diffusion equation. The collected data covered reactor sizes up to 160 m3 , single- and multi-impeller configurations with diverse impeller types, aerated and non-aerated operation in turbulent and transition flow regimes, and various mixing time quantification methods. The model performed excellently for typical multi-impeller configurations as long as flooding conditions were avoided. Mixing times for single-impeller and few nonstandard bioreactors were not predicted equally well. The transient diffusion equation together with the developed transfer resistance analogy proved to be a convenient and predictive model of mixing in typical large-scale bioreactors.
Assuntos
Reatores Biológicos , HidrodinâmicaRESUMO
Large-scale fermentation processes involve complex dynamic interactions between mixing, reaction, mass transfer, and the suspended biomass. Empirical correlations or case-specific computational simulations are usually used to predict and estimate the performance of large-scale bioreactors based on data acquired at bench scale. In this two-part-study, one-dimensional axial diffusion equations were studied as a general and predictive model of large-scale bioreactors. This second part focused on typical fed-batch operations where substrate gradients are known to occur, and characterized the profiles of substrate, pH, oxygen, carbon dioxide, and temperature. The physically grounded steady-state axial diffusion equations with first- and zeroth-order kinetics yielded analytical solutions to the relevant variables. The results were compared with large-scale Escherichia coli and Saccharomyces cerevisiae experiments and simulations from the literature, and good agreement was found in substrate profiles. The analytical profiles obtained for dissolved oxygen, temperature, pH, and CO 2 ${\text{CO}}_{2}$ were also consistent with the available data. Distribution functions for the substrate were defined, and efficiency factors for biomass growth and oxygen uptake rate were derived. In conclusion, this study demonstrated that axial diffusion equations can be used to model the effects of mixing and reaction on the relevant variables of typical large-scale fed-batch fermentations.
Assuntos
Dióxido de Carbono , Oxigênio , Temperatura , Reatores Biológicos , Fermentação , Biomassa , Saccharomyces cerevisiae , Escherichia coli , Concentração de Íons de HidrogênioRESUMO
Adaptive laboratory evolution (ALE) is a powerful approach for improving phenotypes of microbial hosts. Evolved strains typically contain numerous mutations that can be revealed by whole-genome sequencing. However, determining the contribution of specific mutations to new phenotypes is typically challenging and laborious. This task is complicated by factors such as the mutation type, the genomic context, and the interplay between different mutations. Here, a novel approach was developed to identify the significance of mutations in strains evolved from Acinetobacter baylyi ADP1. This method, termed rapid advantageous mutation screening and selection (RAMSES), was used to analyze mutants that emerged from stepwise adaptation to and consumption of high levels of ferulate, a common lignin-derived aromatic compound. After whole-genome sequence analysis, RAMSES allowed rapid determination of effective mutations and seamless introduction of the beneficial mutations into the chromosomes of new strains with different genetic backgrounds. This simple approach to reverse engineering exploits the natural competence and high recombination efficiency of ADP1. Mutated DNA, added directly to growing cells, replaces homologous chromosomal regions to generate transformants that will become enriched if there is a selective benefit. Thus, advantageous mutations can be rapidly identified. Here, the growth advantage of transformants under selective pressure revealed key mutations in genes related to aromatic transport, including hcaE, hcaK, and vanK, and a gene, ACIAD0482, which is associated with lipopolysaccharide synthesis. This study provided insights into the enhanced utilization of industrially relevant aromatic substrates and demonstrated the use of A. baylyi ADP1 as a convenient platform for strain development and evolution studies. IMPORTANCE Microbial conversion of lignin-enriched streams is a promising approach for lignin valorization. However, the lignin-derived aromatic compounds are toxic to cells at relevant concentrations. Although adaptive laboratory evolution (ALE) is a powerful approach to develop more tolerant strains, it is typically laborious to identify the mechanisms underlying phenotypic improvement. We employed Acinetobacter baylyi ADP1, an aromatic-compound-degrading strain that may be useful for biotechnology. The natural competence and high recombination efficiency of this strain can be exploited for critical applications, such as the breakdown of lignin and plastics and abundant polymers composed of aromatic subunits. The natural transformability of this bacterium enabled us to develop a novel approach for rapid screening of advantageous mutations from ALE-derived, aromatic-tolerant, ADP1-derived strains. We clarified the mechanisms and genetic targets for improved tolerance toward common lignin-derived aromatic compounds. This study facilitates metabolic engineering for lignin valorization.
Assuntos
Acinetobacter , Acinetobacter/metabolismo , Lignina/metabolismo , Engenharia Metabólica , MutaçãoRESUMO
The performance of large-scale stirred tank and bubble column bioreactors is often hindered by insufficient macromixing of feeds, leading to heterogeneities in pH, substrate, and oxygen, which complicates process scale-up. Appropriate feed placement or the use of multiple feed points could improve mixing. Here, theoretically optimal placement of feed points was derived using one-dimensional diffusion equations. The utility of optimal multipoint feeds was evaluated with mixing, pH control, and bioreaction simulations using three-dimensional compartment models of four industrially relevant bioreactors with working volumes ranging from 8 to 237 m3 . Dividing the vessel axially in equal-sized compartments and locating a feed point or multiple feed points symmetrically in each compartment reduced the mixing time substantially by more than a minute and mitigated gradients of pH, substrate, and oxygen. Performance of the large-scale bioreactors was consequently restored to ideal, homogeneous reactor performance: oxygen consumption and biomass yield were recovered and the phenotypical heterogeneity of the biomass population was diminished.
Assuntos
Reatores Biológicos , Oxigênio , BiomassaRESUMO
Microbial storage compounds, such as wax esters (WE), are potential high-value lipids for the production of specialty chemicals and medicines. Their synthesis, however, is strictly regulated and competes with cell growth, which leads to trade-offs between biomass and product formation. Here, we use metabolic engineering and synergistic substrate cofeeding to partition the metabolism of Acinetobacter baylyi ADP1 into two distinct modules, each dedicated to cell growth and WE biosynthesis, respectively. We first blocked the glyoxylate shunt and upregulated the WE synthesis pathway to direct the acetate substrate exclusively for WE synthesis, then we controlled the supply of gluconate so it could be used exclusively for cell growth and maintenance. We show that the two modules are functionally independent from each other, allowing efficient lipid accumulation while maintaining active cell growth. Our strategy resulted in 7.2- and 4.2-fold improvements in WE content and productivity, respectively, and the product titer was enhanced by 8.3-fold over the wild type strain. Notably, during a 24-h cultivation, a yield of 18% C-WE/C-total-substrates was achieved, being the highest reported for WE biosynthesis. This study provides a simple, yet powerful, means of controlling cellular operations and overcoming some of the fundamental challenges in microbial storage lipid production.
Assuntos
Acinetobacter/metabolismo , Ésteres/metabolismo , Engenharia Metabólica , Ceras/metabolismo , Biomassa , Reatores Biológicos , Meios de Cultura , Gluconatos , Microbiologia IndustrialRESUMO
Despite the continuing interest in various plant and natural products, only a small portion of the biologically active compounds from nature has been discovered and exploited. In this study, antioxidant and antibacterial properties of aqueous fractions of three endophytic fungi isolated from the roots of 8-year-old Scots pines (Pinus sylvestris) growing on a drained peatland were investigated. The endophytic fungi species were Acephala applanata, Phialocephala fortinii, and Humicolopsis cephalosporioides/Coniochaeta mutabilis. The bioactivities were examined using hydrogen peroxide scavenging and oxygen radical absorbance capacity tests as well as sensitive Escherichia coli-based biosensors, which produce a luminescent signal in the presence of substances with oxidative or genotoxic properties. In addition, cell models for Parkinson's disease, age-related macular degeneration, and osteoarthritis were used to evaluate the potential for pharmaceutical applications. The aqueous extracts of fungi and 19 out of 42 fractions were found to be active in one or more of the tests used. However, no activity was found in the age-related macular degeneration and osteoarthritis cell model tests. Additionally, bioactivity data was connected with metabolites putatively annotated, and out of 330 metabolites, 177 were interesting in view of the bioactivities investigated. A majority of these were peptides and all three fungal species shared a highly similar metabolome. We propose that Scots pine endophytic fungi are a rich source of interesting metabolites, and synergistic effects may cause the bioactivities, as they were found to vary after the fractionation process.
Assuntos
Ascomicetos , Pinus sylvestris , Pinus , Fungos , Metaboloma , Raízes de Plantas , PlantasRESUMO
Lignin has potential as a sustainable feedstock for microbial production of industrially relevant molecules. However, the required lignin depolymerization yields a heterogenic mixture of aromatic monomers that are challenging substrates for the microorganisms commonly used in the industry. Here, we investigated the properties of lignin-related aromatic compounds (LRAs), namely coumarate, ferulate, and caffeate, in the synthesis of biomass and products in an LRA-utilizing bacterial host Acinetobacter baylyi ADP1. The biosynthesis products, wax esters, and alkanes are relevant compounds for the chemical and fuel industries. Here, wax esters were produced by a native pathway of ADP1, whereas alkanes were produced by a synthetic pathway introduced to the host. Using individual LRAs as substrates, the growth and product formation were monitored with internal biosensors and off-line analytics. Of the tested LRAs, coumarate was the most propitious in terms of product synthesis. Wax esters were produced from coumarate with yield and titer of 37 mg/gcoumarate and 202 mg/L, whereas alkanes were produced with a yield of 62.3 µg /gcoumarate and titer of 152 µg/L. This study demonstrates the microbial preference for certain LRAs and highlights the potential of A. baylyi ADP1 as a host for LRA upgrading to value-added products.
Assuntos
Acinetobacter/metabolismo , Alcanos/metabolismo , Lignina/metabolismo , Ceras/metabolismo , Biomassa , Ácidos Cafeicos/metabolismo , Ácidos Cumáricos/metabolismo , Ésteres/metabolismo , Microbiologia Industrial/métodosRESUMO
BACKGROUND: Integration of synthetic metabolic pathways to catabolically diverse chassis provides new opportunities for sustainable production. One attractive scenario is the use of abundant waste material to produce a readily collectable product, which can reduce the production costs. Towards that end, we established a cellular platform for the production of semivolatile medium-chain α-olefins from lignin-derived molecules: we constructed 1-undecene synthesis pathway in Acinetobacter baylyi ADP1 using ferulate, a lignin-derived model compound, as the sole carbon source for both cell growth and product synthesis. RESULTS: In order to overcome the toxicity of ferulate, we first applied adaptive laboratory evolution to A. baylyi ADP1, resulting in a highly ferulate-tolerant strain. The adapted strain exhibited robust growth in 100 mM ferulate while the growth of the wild type strain was completely inhibited. Next, we expressed two heterologous enzymes in the wild type strain to confer 1-undecene production from glucose: a fatty acid decarboxylase UndA from Pseudomonas putida, and a thioesterase 'TesA from Escherichia coli. Finally, we constructed the 1-undecene synthesis pathway in the ferulate-tolerant strain. The engineered cells were able to produce biomass and 1-undecene solely from ferulate, and excreted the product directly to the culture headspace. CONCLUSIONS: In this study, we employed a bacterium Acinetobacter baylyi ADP1 to integrate a natural aromatics degrading pathway to a synthetic production route, allowing the upgradation of lignin derived molecules to value-added products. We developed a highly ferulate-tolerant strain and established the biosynthesis of an industrially relevant chemical, 1-undecene, solely from the lignin-derived model compound. This study reports the production of alkenes from lignin derived molecules for the first time and demonstrates the potential of lignin as a sustainable resource in the bio-based synthesis of valuable products.
Assuntos
Acinetobacter/metabolismo , Alcenos/metabolismo , Lignina/metabolismo , Redes e Vias Metabólicas , Acinetobacter/genética , Biomassa , Evolução Molecular Direcionada , Escherichia coli/enzimologia , Escherichia coli/genética , Esterases/genética , Engenharia Metabólica , Pseudomonas putida/enzimologia , Pseudomonas putida/genéticaRESUMO
Endophytes are microorganisms living inside plant hosts and are known to be beneficial for the host plant vitality. In this study, we isolated three endophytic fungus species from the roots of Scots pine seedlings growing on Finnish drained peatland setting. The isolated fungi belonged to dark septate endophytes (DSE). The metabolic profiles of the hot water extracts of the fungi were investigated using Ultrahigh Performance Liquid Chromatography with Diode Array Detection and Electron Spray Ionization source Mass Spectrometry with Orbitrap analyzer (UPLC-DAD-ESI-MS-Orbitrap). Out of 318 metabolites, we were able to identify 220, of which a majority was amino acids and peptides. Additionally, opine amino acids, amino acid quinones, Amadori compounds, cholines, nucleobases, nucleosides, nucleotides, siderophores, sugars, sugar alcohols and disaccharides were found, as well as other previously reported metabolites from plants or endophytes. Some differences of the metabolic profiles, regarding the amount and identity of the found metabolites, were observed even though the fungi were isolated from the same host. Many of the discovered metabolites have been described possessing biological activities and properties, which may make a favorable contribution to the host plant nutrient availability or abiotic and biotic stress tolerance.
RESUMO
The authors wish to make the following corrections to this paper published in Molecules[...].
RESUMO
BACKGROUND: Fatty aldehydes are industrially relevant compounds, which also represent a common metabolic intermediate in the microbial synthesis of various oleochemicals, including alkanes, fatty alcohols and wax esters. The key enzymes in biological fatty aldehyde production are the fatty acyl-CoA/ACP reductases (FARs) which reduce the activated acyl molecules to fatty aldehydes. Due to the disparity of FARs, identification and in vivo characterization of reductases with different properties are needed for the construction of tailored synthetic pathways for the production of various compounds. RESULTS: Fatty aldehyde production in Acinetobacter baylyi ADP1 was increased by the overexpression of three different FARs: a native A. baylyi FAR Acr1, a cyanobacterial Aar, and a putative, previously uncharacterized dehydrogenase (Ramo) from Nevskia ramosa. The fatty aldehyde production was followed in real-time inside the cells with a luminescence-based tool, and the highest aldehyde production was achieved with Aar. The fate of the overproduced fatty aldehydes was studied by measuring the production of wax esters by a native downstream pathway of A. baylyi, for which fatty aldehyde is a specific intermediate. The wax ester production was improved with the overexpression of Acr1 or Ramo compared to the wild type A. baylyi by more than two-fold, whereas the expression of Aar led to only subtle wax ester production. The overexpression of FARs did not affect the length of the acyl chains of the wax esters. CONCLUSIONS: The fatty aldehyde production, as well as the wax ester production of A. baylyi, was improved with the overexpression of a key enzyme in the pathway. The wax ester titer (0.45 g/l) achieved with the overexpression of Acr1 is the highest reported without hydrocarbon supplementation to the culture. The contrasting behavior of the different reductases highlight the significance of in vivo characterization of enzymes and emphasizes the possibilities provided by the diversity of FARs for pathway and product modulation.
Assuntos
Acinetobacter/genética , Aldeído Oxirredutases/genética , Ésteres/metabolismo , Ácidos Graxos/biossíntese , Acinetobacter/metabolismo , Aldeído Oxirredutases/metabolismo , Aldeídos/análise , Aldeídos/metabolismo , Ésteres/análise , Ácidos Graxos/análise , Ácidos Graxos/metabolismo , Álcoois Graxos/metabolismo , Oxirredutases/metabolismoRESUMO
Acinetobacter baylyi ADP1 naturally produces wax esters that could be used as a raw material in industrial applications. We attempted to improve wax ester yield of A. baylyi ADP1 by removing rmlA, a gene involved in exopolysaccharide production. Growth rate, biomass formation and wax ester yield on 4-hydroxybenzoate were not affected, but the rmlA - strain grew slower on acetate, while reaching similar biomass and wax ester yield. The rmlA - cells had malformed shape and large size and grew poorly on glucose without expression of the gene for pyruvate kinase (pykF) from Escherichia coli. The pykF-expressing rmlA - strain had similar growth rate, lowered biomass formation and improved wax ester production on glucose as compared to the wild-type strain expressing pykF. Cultivation of the pykF-expressing rmlA - strain on an elevated glucose concentration in a medium supplemented with amino acids resulted in doubled molar wax ester yield and acetate production.
Assuntos
Acinetobacter/genética , Acinetobacter/metabolismo , Ésteres/metabolismo , Nucleotidiltransferases/genética , Parabenos/química , Acetatos/química , Biomassa , Escherichia coli/enzimologia , Microbiologia Industrial , Piruvato QuinaseRESUMO
A high growth rate in bacterial cultures is usually achieved by optimizing growth conditions, but metabolism of the bacterium limits the maximal growth rate attainable on the carbon source used. This limitation can be circumvented by engineering the metabolism of the bacterium. Acinetobacter baylyi has become a model organism for studies of bacterial metabolism and metabolic engineering due to its wide substrate spectrum and easy-to-engineer genome. It produces naturally storage lipids, such as wax esters, and has a unique gluconate catabolism as it lacks a gene for pyruvate kinase. We engineered the central metabolism of A. baylyi ADP1 more favorable for gluconate catabolism by expressing the pyruvate kinase gene (pykF) of Escherichia coli. This modification increased growth rate when cultivated on gluconate or glucose as a sole carbon source in a batch cultivation. The engineered cells reached stationary phase on these carbon sources approximately twice as fast as control cells carrying an empty plasmid and produced similar amount of biomass. Furthermore, when grown on either gluconate or glucose, pykF expression did not lead to significant accumulation of overflow metabolites and consumption of the substrate remained unaltered. Increased growth rate on glucose was not accompanied with decreased wax ester production, and the pykF-expressing cells accumulated significantly more of these storage lipids with respect to cultivation time.
Assuntos
Acinetobacter/genética , Acinetobacter/metabolismo , Proteínas de Escherichia coli/genética , Escherichia coli/enzimologia , Gluconatos/metabolismo , Glucose/metabolismo , Piruvato Quinase/genética , Acinetobacter/crescimento & desenvolvimento , Escherichia coli/genética , Proteínas de Escherichia coli/metabolismo , Expressão Gênica , Engenharia Metabólica , Piruvato Quinase/metabolismoRESUMO
Bifidobacterium bifidum MIMBb75 is a human intestinal isolate demonstrated to be interactive with the host and efficacious as a probiotic. However, the molecular biology of this microorganism is yet largely unknown. For this reason, we undertook whole-genome sequencing of B. bifidum MIMBb75 to identify potential genetic factors that would explain the metabolic and probiotic attributes of this bacterium. Comparative genomic analysis revealed a 45-kb chromosomal region that comprises 19 putative genes coding for a potential type IV secretion system (T4SS). Thus, we undertook the initial characterization of this genetic region by studying the putative virB1-like gene, named tgaA. Gene tgaA encodes a peptidoglycan lytic enzyme containing two active domains: lytic murein transglycosylase (LT, cd00254.3) and cysteine- and histidine-dependent amidohydrolase/peptidase (CHAP, pfam05257.4). By means of several in vitro assays, we experimentally confirmed that protein TgaA, consistent with its computationally assigned role, has peptidoglycan lytic activity, which is principally associated to the LT domain. Furthermore, immunofluorescence and immunogold labeling showed that the protein TgaA is abundantly expressed on the cell surface of B. bifidum MIMBb75. According to the literature, the T4SSs, which have not been characterized before in bifidobacteria, can have important implications for bacterial cell-to-cell communication as well as cross talk with host cells, justifying the interest for further studies aimed at the investigation of this genetic region.
Assuntos
Sistemas de Secreção Bacterianos/genética , Bifidobacterium/genética , Bifidobacterium/metabolismo , DNA Bacteriano/química , DNA Bacteriano/genética , Genoma Bacteriano , Análise de Sequência de DNA , Genes Bacterianos , Hidrólise , Dados de Sequência Molecular , Peptidoglicano/metabolismoRESUMO
BACKGROUND: Caloramator celer is a strict anaerobic, alkalitolerant, thermophilic bacterium capable of converting glucose to hydrogen (H2), carbon dioxide, acetate, ethanol and formate by a mixed acid fermentation. Depending on the growth conditions C. celer can produce H2 at high yields. For a biotechnological exploitation of this bacterium for H2 production it is crucial to understand the factors that regulate carbon and electron fluxes and therefore the final distribution of metabolites to channel the metabolic flux towards the desired product. RESULTS: Combining experimental results from batch fermentations with genome analysis, reconstruction of central carbon metabolism and metabolic flux analysis (MFA), this study shed light on glucose catabolism of the thermophilic alkalitolerant bacterium C. celer. Two innate factors pertaining to culture conditions have been identified to significantly affect the metabolic flux distribution: culture pH and partial pressures of H2 (PH2). Overall, at alkaline to neutral pH the rate of biomass synthesis was maximized, whereas at acidic pH the lower growth rate and the less efficient biomass formation are accompanied with more efficient energy recovery from the substrate indicating high cell maintenance possibly to sustain intracellular pH homeostasis. Higher H2 yields were associated with fermentation at acidic pH as a consequence of the lower synthesis of other reduced by-products such as formate and ethanol. In contrast, PH2 did not affect the growth of C. celer on glucose. At high PH2 the cellular redox state was balanced by rerouting the flow of carbon and electrons to ethanol and formate production allowing unaltered glycolytic flux and growth rate, but resulting in a decreased H2 synthesis. CONCLUSION: C. celer possesses a flexible fermentative metabolism that allows redistribution of fluxes at key metabolic nodes to simultaneously control redox state and efficiently harvest energy from substrate even under unfavorable conditions (i.e. low pH and high PH2). With the H2 production in mind, acidic pH and low PH2 should be preferred for a high yield-oriented process, while a high productivity-oriented process can be achieved at alkaline pH and high PH2.
Assuntos
Bactérias/metabolismo , Hidrogênio/metabolismo , Bactérias/crescimento & desenvolvimento , Técnicas de Cultura Celular por Lotes , Biomassa , Carbono/metabolismo , Etanol/metabolismo , Formiatos/metabolismo , Glucose/metabolismo , Concentração de Íons de Hidrogênio , Redes e Vias MetabólicasRESUMO
Monitoring of intracellular redox status in a bacterial cell provides vital information about the physiological status of the cell, which can be exploited in several applications such as metabolic engineering and computational modeling. Fluorescent protein-based genetically encoded sensors can be used to monitor intracellular oxidation/reduction status. This study reports the development of a redox sensor for intracellular measurements using fluorescent protein pairs and the phenomenon of Förster resonance energy transfer (FRET). For the development of the sensor, fluorescent proteins Citrine and Cerulean were genetically modified to carry reactive cysteine residues on the protein surface close to the chromophore and a constructed FRET pair was fused using a biotinylation domain as a linker. In oxidized state, the FRET pairs are in close proximity by labile disulfide bond formation resulting in higher FRET efficiency. In reducing environment, the FRET is diminished due to the increased distance between FRET pairs providing large dynamic measurement range to the sensor. Intracellular studies in Escherichia coli mutants revealed the capability of the sensor in detecting real-time redox variations at single cell level. The results were validated by intensity based and time resolved measurements. The functional immobilization of the fluorescent protein-based FRET sensor at solid surfaces for in vitro applications was also demonstrated.
Assuntos
Técnicas Biossensoriais , Proteínas de Escherichia coli/metabolismo , Escherichia coli/metabolismo , Transferência Ressonante de Energia de Fluorescência/métodos , Proteínas Luminescentes/metabolismo , Análise de Célula Única/métodos , Proteínas de Bactérias/metabolismo , Cisteína/química , Cisteína/metabolismo , Citoplasma/metabolismo , OxirreduçãoRESUMO
BACKGROUND: Lignin is a highly abundant but strongly underutilized natural resource that could serve as a sustainable feedstock for producing chemicals by microbial cell factories. Because of the heterogeneous nature of the lignin feedstocks, the biological upgrading of lignin relying on the metabolic routes of aerobic bacteria is currently considered as the most promising approach. However, the limited substrate range and the inefficient catabolism of the production hosts hinder the upgrading of lignin-related aromatics. Particularly, the aerobic O-demethylation of the methoxyl groups in aromatic substrates is energy-limited, inhibits growth, and results in carbon loss in the form of CO2. RESULTS: In this study, we present a novel approach for carbon-wise utilization of lignin-related aromatics by the integration of anaerobic and aerobic metabolisms. In practice, we employed an acetogenic bacterium Acetobacterium woodii for anaerobic O-demethylation of aromatic compounds, which distinctively differs from the aerobic O-demethylation; in the process, the carbon from the methoxyl groups is fixed together with CO2 to form acetate, while the aromatic ring remains unchanged. These accessible end-metabolites were then utilized by an aerobic bacterium Acinetobacter baylyi ADP1. By utilizing this cocultivation approach, we demonstrated an upgrading of guaiacol, an abundant but inaccessible substrate to most microbes, into a plastic precursor muconate, with a nearly equimolar yields (0.9 mol/mol in a small-scale cultivation and 1.0 mol/mol in a one-pot bioreactor cultivation). The process required only a minor genetic engineering, namely a single gene knock-out. Noticeably, by employing a metabolic integration of the two bacteria, it was possible to produce biomass and muconate by utilizing only CO2 and guaiacol as carbon sources. CONCLUSIONS: By the novel approach, we were able to overcome the issues related to aerobic O-demethylation of methoxylated aromatic substrates and demonstrated carbon-wise conversion of lignin-related aromatics to products with yields unattainable by aerobic processes. This study highlights the power of synergistic integration of distinctive metabolic features of bacteria, thus unlocking new opportunities for harnessing microbial cocultures in upgrading challenging feedstocks.
RESUMO
Plastic debris degrades in the water environments due to various factors such as mechanical stress. Small-sized degradation products, including plastic monomers, are currently monitored using equipment which might be unsuitable for screening. Here, we developed a recombinant whole-cell bacterial biosensor, which could be used for this type of monitoring. The Escherichia coli pBAV1K-ACU-lucFF cells contain a luciferase-based reporter system under the control of acrylic acid specific promoter. The biosensor cells were used to detect acrylic acid monomers from both sterile water and spiked lake water samples, indicating usability with environmental samples. Furthermore, poly(acrylic acid) was incubated in salt water, and the biosensor cells could identify acrylic acid monomers originating from it. Thus, the cells could be used to observe similar processes in the environment. The results show that the bacterial biosensors could complement the current research methods of plastic monomer monitoring in water environments with a potential for higher throughputs.
Assuntos
Técnicas Biossensoriais , Plásticos , Acrilatos , Bactérias/metabolismo , Técnicas Biossensoriais/métodos , Escherichia coli , Plásticos/metabolismo , ÁguaRESUMO
Microbial production of intracellular compounds can be engineered by redirecting the carbon flux towards products and increasing the cell size. Potential engineering strategies include exploiting clustered regularly interspaced short palindromic repeats interference (CRISPRi)-based tools for controlling gene expression. Here, we applied CRISPRi for engineering Acinetobacter baylyi ADP1, a model bacterium for synthesizing intracellular storage lipids, namely wax esters. We first established an inducible CRISPRi system for strain ADP1, which enables tightly controlled repression of target genes. We then targeted the glyoxylate shunt to redirect carbon flow towards wax esters. Second, we successfully employed CRISPRi for modifying cell morphology by repressing ftsZ, an essential gene required for cell division, in combination with targeted knock-outs to generate significantly enlarged filamentous or spherical cells respectively. The engineered cells sustained increased wax ester production metrics, demonstrating the potential of cell morphology engineering in the production of intracellular lipids.
Assuntos
Acinetobacter , Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , Engenharia Metabólica , Acinetobacter/genética , Acinetobacter/metabolismo , Ésteres/metabolismo , LipídeosRESUMO
Methane (CH4) is a sustainable carbon feedstock for value-added chemical production in aerobic CH4-oxidizing bacteria (methanotrophs). Under substrate-limited (e.g., oxygen and nitrogen) conditions, CH4 oxidation results in the production of various short-chain organic acids and platform chemicals. These CH4-derived products could be broadened by utilizing them as feedstocks for heterotrophic bacteria. As a proof of concept, a two-stage system for CH4 abatement and 1-alkene production was developed in this study. Type I and Type II methanotrophs, Methylobacter tundripaludum SV96 and Methylocystis rosea SV97, respectively, were investigated in batch tests under different CH4 and air supplementation schemes. CH4 oxidation under either microaerobic or aerobic conditions induced the production of formate, acetate, succinate, and malate in M. tundripaludum SV96, accounting for 4.8-7.0% of consumed carbon from CH4 (C-CH4), while M. rosea SV97 produced the same compounds except for malate, and with lower efficiency than M. tundripaludum SV96, accounting for 0.7-1.8% of consumed C-CH4. For the first time, this study demonstrated the use of organic acid-rich spent media of methanotrophs cultivating engineered Acinetobacter baylyi ADP1 'tesA-undA cells for 1-alkene production. The highest yield of 1-undecene was obtained from the spent medium of M. tundripaludum SV96 at 68.9 ± 11.6 µmol mol Csubstrate -1. However, further large-scale studies on fermenters and their optimization are required to increase the production yields of organic acids in methanotrophs.