Nucleation-Growth Versus Spinodal Decomposition in Fe-Cr Alloys: An Experimental Verification by Atom Probe Tomography and Small Angle Neutron Scattering.

Identifying the operative mode of phase separation [spinodal decomposition (SD) or nucleation-growth (NG)] remains an extremely important area of research. The present work examines this critically in the Fe-Cr system using atom probe tomography (APT) and small angle neutron scattering (SANS), and establishes the framework to distinguish the two different modes of α' phase separation in thermally aged Fe-35 at% Cr and Fe-20 at% Cr alloys. Independent APT analysis determines the mode of phase separation on the basis of (i) the presence/absence of periodic chemical fluctuation through radial distribution function analysis and (ii) interphase interface characteristics (diffuse/sharp). SANS analysis, in contrast, yields virtually indistinguishable correlation peaks for both the modes, which necessitates further investigation of the several different aspects of SANS profiles in the light of APT results. For the first time, key features of SANS profiles have been identified that can unambiguously distinguish SD from NG in the Fe-Cr system: (i) nature of temporal evolution of FWHM of the correlation peak and (ii) appropriate value of γ for fitting with the dynamic scaling model (γ = 6 for SD, Fe-35 at% Cr alloy; γ = 4 for NG, Fe-20 at% Cr alloy).

Confinement driven anomalous freezing in nano porous spray dried microspheres.

One-step evaporative jamming of colloidal silica particles in contact-free spray droplets resulted in well-defined powder micro-granules with interstitial nanopores. This paper reports the anomalous freezing behaviour of confined water in the microspheres synthesized using spray drying. It has been revealed that the freezing point of water in these microspheres gets significantly lowered (∼-45 °C) owing to the confinement effect. Thermoporometry results are corroborated with the structural details obtained using complementary techniques of gas adsorption measurements and small-angle x-ray scattering.

A Combinatorial Approach to Reliable Quantitative Analysis of Small Nano-Sized Precipitates: A Case Study with α' Precipitates in Fe-20 at% Cr Alloy.

The quantitative characterization of small nano-sized precipitates poses genuine challenges and is often deficient in accuracy due to the inherent limitations inevitably associated with the individual experimental techniques. A convenient solution is to utilize multiple complementary techniques. The present work demonstrates an effective way to reliably quantify nano-sized precipitates using a combination of complementary techniques of atom probe tomography (APT), small angle neutron scattering (SANS), and transmission electron microscopy (TEM). As a case study, the size (radius, r), number density (NP), volume fraction (ϕ), and chemical composition of Cr-rich α' precipitates are determined in Fe­20 at% Cr alloy, thermally aged at 773 K for 1,000 h. This combinatorial approach utilizes the strength of each technique in such a way that the overall accuracy of quantitative precipitation analysis improves significantly. For example, the superior spatial resolution makes TEM the appropriate technique to estimate the size and size distribution of the precipitates, while APT provides the chemical composition. Similarly, SANS analysis incorporates both the size and the compositional information thus derived independently and provides statiscally averaged quantitative analysis overcoming the field-of-view limitations of both TEM and APT. This combinatorial approach improves the accuracy of quantification and provides the true representation of the microstructure.

Revisiting Temporal Evolution of Cu-Rich Precipitates in Fe-Cu Alloy: Correlative Small Angle Neutron Scattering and Atom-Probe Tomography Studies.

Binary Fe-Cu alloys are effective prototypes for investigating radiation-induced formation and growth of nanometric Cu-rich precipitates (CRPs) in nuclear reactor pressure vessels. In this report, the temporal evolution of CRPs during thermal aging of Fe-Cu binary alloys has been investigated by using complementary techniques such as atom probe tomography (APT) and small-angle neutron scattering (SANS). We report a detailed quantitative evolution of a rarely observed morphological transformation of Cu precipitates from spherical to ellipsoid with a significant change (approximately two times) in aspect ratio, an effect known to be associated with the 9R-3R structural transition of the precipitates. It is demonstrated through APT that the precipitates remain spherical up to 8 h, however, they subsequently convert to oblate ellipsoid upon further aging. SANS analysis also detected signs of this morphological transition in reciprocal space. Furthermore, SANS quantifies evolution of the precipitates and corroborates well with the APT results. Interestingly, the power-law exponent of the temporal evolution for mean size and number density agree reasonably well with the Lifshitz-Slyozov-Wagner model, in spite of the complex morphological evolution of the precipitates.

Comprehensive characterization of the structure of Zr-based metallic glasses.

Structure of metallic glasses fascinates as the generic amorphous structural template for ubiquitous systems. Its specification necessitates determination of the complete hierarchical structure, starting from short-range-order (SRO) → medium-range-order (MRO) → bulk structure and free volume (FV) distribution. This link has largely remained elusive since previous investigations adopted one-technique-at-a-time approach, focusing on limited aspects of any one domain. Reconstruction of structure from experimental data inversion is non-unique for many of these techniques. As a result, complete and precise structural understanding of glass has not emerged yet. In this work, we demonstrate the first experimental pathway for reconstruction of the integrated structure, for Zr 67 Ni 33 and Zr 52 Ti 6 Al 10 Cu 18 Ni 14 glasses. Our strategy engages diverse (× 7) multi-scale techniques [XAFS, 3D-APT, ABED/NBED, FEM, XRD, PAS, FHREM] on the same glass. This strategy complemented mutual limitations of techniques and corroborated common parameters to generate complete, self-consistent and precise parameters. Further, MRO domain size and inter-void separation were correlated to identify the presence of FV at MRO boundaries. This enabled the first experimental reconstruction of hierarchical subset: SRO → MRO → FV → bulk structure. The first ever image of intermediate region between MRO domains emerged from this link. We clarify that determination of all subsets is not our objective; the essence and novelty of this work lies in directing the pathway towards finite solution, in the most logical and unambiguous way.

Magnetic ordering of the martensite phase in Ni-Co-Mn-Sn-based ferromagnetic shape memory alloys.

The magnetic state of low temperature martensite phase in Co-substituted Ni-Mn-Sn-based ferromagnetic shape memory alloys (FSMAs) has been investigated, in view of numerous conflicting reports of occurrences of spin glass (SG), superparamagnetism (SPM) or long range anti-ferromagnetic (AF) ordering. Combination of DC magnetization, AC susceptibility and small angle neutron scattering (SANS) studies provide clear evidence for AF order in the martensitic phase of Ni45Co5Mn38Sn12 alloy and rule out SPM and SG orders. Identical studies on another alloy of close composition, Ni44Co6Mn40Sn10, point to the presence of SG order in the martensitic phase and the absence of SPM behavior, contrary to earlier reports. SANS results do show the presence of nanometre-sized clusters but they are found to grow in size from 3 nm at 30 K to 11 nm at 300 K, and do not correlate with magnetism in these alloys.