Positive Synergy between the Helical Poly(phenylacetylene) Backbones and the Helical L-Proline Oligopeptide Pendants for Enhanced Enantioseparation Properties.

A series of optically active helical poly(phenylacetylene)s (PPA-Pro1, PPA-Pro3, PPA-Pro6, PPA-Pro9, and PPA-Pro12) bearing different chain lengths of L-proline oligopeptide in the side chains were obtained by polymerizing the corresponding novel phenylacetylene monomers. The monomer adopted a trans-rich helix structure when the L-proline oligopeptide chain length was longer, according to the optical activities and 2D-NMR analysis. The helical structure could be maintained and significantly influenced the polymers' helical conformation by introducing the L-proline oligopeptide to the pendants. By the way, the morphology of PPA-Pro3 was observed by atomic force microscope (AFM) on highly oriented pyrolytic graphite (HOPG), and the information on the helix direction, pitch, and chain arrangement was obtained. Also, the chiral separation properties of these polymer-based chiral stationary phases (CSPs) were investigated using high-performance liquid chromatography (HPLC). The poly(phenylacetylene)s showed enhanced enantioseparation properties toward various racemates depending on the longer chain length of the L-proline oligopeptide in the pendants and the positive synergy between the helical backbone and helical side chains. Particularly, PPA-Pro9 showed comparable or even superior enantioseparation properties for racemates 2 and 9 to four commercial columns (Daicel Chiralpak or Chiralcel AD, AS, OD, and OT), indicating that these poly(phenylacetylene)-based CSPs have potential practical values. This work presented here provides inspiration for the further development of CSPs based on a new paradigm.

Hybridization of helical poly(phenylacetylene)s bearing L-proline tripeptide pendants into porous silica microspheres as a solvent-tolerable chiral stationary phase for liquid chromatography.

A novel one-handed helical copoly(phenylacetylene) (CPA) bearing L-proline tripeptide pendants and a few triethoxysilyl residues was synthesized and hybridized into SiO2 porous microspheres (PMSs) during microsphere growth through the hydrolytic polycondensation of ethoxysilyl groups. Nuclear magnetic resonance and Fourier transform infrared spectroscopy results verified the successful preparation of CPA and its hybrid product using SiO2 PMSs. The chiral recognition ability of the resulting CPA with a hybridized-type chiral stationary phase (HCSP) for high-performance liquid chromatography (HPLC) was investigated, revealing its high recognition ability for selected racemates. Moreover, the HCSP showed good solvent tolerability, thus broadening the selection of suitable eluents. The separation effect of the HCSP for the racemate N,N-diphenylcyclohexane-1,2-dicarboxamide (7) improved significantly after introducing CHCl3 in the eluent, resulting in separation factors equivalent or superior to common commercially available polysaccharide-based chiral stationary phases. The proposed preparation strategy provides a new and valuable method for obtaining poly(phenylacetylene)-based HCSPs suitable for a wide range of applications and eluent conditions.

Rotaxane Formation of Multicyclic Polydimethylsiloxane in a Silicone Network: A Step toward Constructing "Macro-Rotaxanes" from High-Molecular-Weight Axle and Wheel Components.

Rotaxanes consisting of a high-molecular-weight axle and wheel components (macro-rotaxanes) have high structural freedom, and are attractive for soft-material applications. However, their synthesis remains underexplored. Here, we investigated macro-rotaxane formation by the topological trapping of multicyclic polydimethylsiloxanes (mc-PDMSs) in silicone networks. mc-PDMS with different numbers of cyclic units and ring sizes was synthesized by cyclopolymerization of a α,ω-norbornenyl-functionalized PDMS. Silicone networks were prepared in the presence of 10-60 wt % mc-PDMS, and the trapping efficiency of mc-PDMS was determined. In contrast to monocyclic PDMS, mc-PDMSs with more cyclic units and larger ring sizes can be quantitatively trapped in the network as macro-rotaxanes. The damping performance of a 60 wt % mc-PDMS-blended silicone network was evaluated, revealing a higher tan δ value than the bare PDMS network. Thus, macro-rotaxanes are promising as non-leaching additives for network polymers.

Multidimensional Control of Repeating Unit/Sequence/Topology for One-Step Synthesis of Block Polymers from Monomer Mixtures.

Synchronously and thoroughly adjusting the chemical structure difference between two blocks of the diblock copolymer is very useful for designing materials but difficult to achieve via self-switchable alternating copolymerization. Here, we report self-switchable alternating copolymerization from a mixture of two different cyclic anhydrides, epoxides, and oxetanes, where a simple alkali metal carboxylate catalyst switches between ring-opening alternating copolymerization (ROCOP) of cyclic anhydrides/epoxides and ROCOP of cyclic anhydrides/oxetanes, resulting in the formation of a perfect block tetrapolymer. By investigating the reactivity ratio of these comonomers, a reactivity gradient was established, enabling the precise synthesis of block copolymers with synchronous adjustment of each unit's chemical structure/sequence/topology. Consequently, a diblock tetrapolymer with two glass transition temperatures (Tg) can be easily produced by adjusting the difference in chemical structures between the two blocks.

Topology-Dependent Interaction of Cyclic Poly(ethylene glycol) Complexed with Gold Nanoparticles against Bovine Serum Albumin for a Colorimetric Change.

Unique physical and chemical properties arising from a polymer topology recently draw significant attention. In this study, cyclic poly(ethylene glycol) (c-PEG) was found to significantly interact with bovine serum albumin (BSA), suggested by nuclear magnetic resonance, dynamic light scattering, and fluorescence spectroscopy. On the other hand, linear HO-PEG-OH and MeO-PEG-OMe showed no affinity. Furthermore, a complex of gold nanoparticles and c-PEG (AuNPs/c-PEG) attracted BSA to form aggregates, and the red color of the AuNPs dispersion evidently disappeared, whereas ones with linear PEG or without PEG did not demonstrate such a phenomenon. The interactions among BSA, AuNPs, and PEG were investigated by changing the incubation time and concentration of the components by using UV-Vis and fluorescence spectroscopy.

Tailored Solid-State Carbohydrate Nanostructures Based on Star-Shaped Discrete Block Co-Oligomers.

Carbohydrates are key building blocks for advanced functional materials owing to their biological functions and unique material properties. Here, we propose a star-shaped discrete block co-oligomer (BCO) platform to access carbohydrate nanostructures in bulk and thin-film states via the microphase separation of immiscible carbohydrate and hydrophobic blocks (maltooligosaccharides with 1-4 glucose units and solanesol, respectively). BCOs with various star-shaped architectures and saccharide volume fractions were synthesized using a modular approach. In the bulk, the BCOs self-assembled into common lamellar, cylindrical, and spherical carbohydrate microdomains as well as double gyroid, hexagonally perforated lamellar, and Fddd network morphologies with domain spacings of ∼7 nm. In thin films, long-range-ordered periodic carbohydrate microdomains were fabricated via spin coating. Such controlled spatial arrangements of functional carbohydrate moieties on the nanoscale have great application potential in biomedical and nanofabrication fields.

Cyclization of PEG and Pluronic Surfactants and the Effects of the Topology on Their Interfacial Activity.

A series of cyclic surfactants were synthesized from a poly(ethylene glycol) (PEG) homopolymer and Pluronic surfactants L35, L64, P123, F68, 10R5, and 17R4, and their interfacial activity depending on the topology, chain ends, and block sequence was investigated. The cyclization was performed in a single step through etherification of the PEG homopolymer and the hydrophilic-hydrophobic-hydrophilic (ABA type) poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG), while the hydrophobic-hydrophilic-hydrophobic (BAB type) PPG-PEG-PPG was cyclized via acetalization. The cyclized surfactants were rigorously characterized by nuclear magnetic resonance spectroscopy and size exclusion chromatography. Cyclization of the surfactants induced a significant decrease in the hydrodynamic volume, which was more pronounced than that of the PEG homopolymer. Surface tension (γ) measurements indicated that the interfacial activity of the cyclized surfactants is stronger than their corresponding linear precursors, due to the increase in the surfactant density at the air-water interface as a consequence of the decreased molecular occupational area (A) upon cyclization. In the case of the PEG homopolymer, A considerably decreased from 410 Å2 for the linear PEG prepolymer to 100 Å2 for the cyclized PEG product. While the effects of chain-end groups were found to be limited to surfactants of relatively small molecular weights, the influence of cyclization depended strongly on the hydrophilic/hydrophobic ratio; the higher the PEG composition the surfactants had, the larger the decrease in γ and A; in other words, stronger enhancement in the interfacial activity was observed.

Bicyclic Topology Transforms Self-Assembled Nanostructures in Block Copolymer Thin Films.

Ongoing efforts in materials science have resulted in linear block copolymer systems that generate nanostructures via the phase separation of immiscible blocks; however, such systems are limited with regard to their domain miniaturization and lack of orientation control. We overcome these limitations through the bicyclic topological alteration of a block copolymer system. Grazing incidence X-ray scattering analysis of nanoscale polymer films revealed that bicyclic topologies achieve 51.3-72.8% reductions in domain spacing when compared against their linear analogue, which is more effective than the theoretical predictions for conventional cyclic topologies. Moreover, bicyclic topologies achieve unidirectional orientation and a morphological transformation between lamellar and cylindrical domains with high structural integrity. When the near-equivalent volume fraction between the blocks is considered, the formation of hexagonally packed cylindrical domains is particularly noteworthy. Bicyclic topological alteration is therefore a powerful strategy for developing advanced nanostructured materials for microelectronics, displays, and membranes.

One-Shot Intrablock Cross-Linking of Linear Diblock Copolymer to Realize Janus-Shaped Single-Chain Nanoparticles.

Developing an efficient and versatile process to transform a single linear polymer chain into a shape-defined nanoobject is a major challenge in the fields of chemistry and nanotechnology to replicate sophisticated biological functions of proteins and nucleic acids in a synthetic polymer system. In this study, we performed one-shot intrablock cross-linking of linear block copolymers (BCPs) to realize single-chain nanoparticles (SCNPs) with two chemically compartmentalized domains (Janus-shaped SCNPs). Detailed structural characterizations of the Janus-shaped SCNP composed of polystyrene-block-poly(glycolic acid) revealed its compactly folded conformation and compartmentalized block localization, similar to the self-folded tertiary structures of natural proteins. Versatility of the one-shot intrablock cross-linking was demonstrated using several different BCP precursors. In addition, the Janus-shaped SCNP produce miniscule microphase-separated structures.

Detailed Structural Analyses of Nanofibrillated Bacterial Cellulose and Its Application as Binder Material for a Display Device.

Nanofibrillated bacterial cellulose (NFBC) is produced by culturing a cellulose-producing bacterium under agitated aerobic conditions in a carboxymethylcellulose (CMC)-supplemented medium. Detailed structural analyses revealed that NFBC fiber widths varied with the degree of substitution of the CMC used, and zeta potential values decreased with the increment of CMC concentration in the medium. Transmission electron microscopy observation after immunostaining demonstrated that CMC molecules were present on the NFBC microfibril surfaces. We tested NFBC for utility as a binder for a display device that uses electrochromic (EC) material. Introduction of a quaternary ammonium group into the EC molecules enhanced their interactions with the negatively charged NFBC microfibrils. A casting process homogeneously adsorbed the EC molecules onto the surface of a transparent electrode with NFBC. A homogeneous color change was successfully observed upon applying an electric field, suggesting that NFBC could be used as a binder material for uniform surface adsorption.

Organic-Inorganic Nanocomposite Film for High-Performance Stretchable Resistive Memory Device.

A compatible organic/inorganic nanocomposite film for a stretchable resistive memory device with high performance is demonstrated using poly(4-vinylpyridine)-block-poly(propyl methacrylate) (P4VP-b-PPMA) with zinc oxide (ZnO) nanoparticle. The PPMA soft segment is designed for reducing the rigidity of the active layer, while the P4VP block serves as a charge-trapping component to induce conductive filament and also a compatible moiety for inorganic nanoparticles through hydrogen bonding. The experimental results show that the P4VP-b-PPMA-based electrical memory device exhibits write-once-read-many-times memory behavior and an excellent ON/OFF current ratio of over 105 with a stable turn-on voltage (Vset ) around -2.0 V and stable memory behavior upon stretching up to 60% strain. On the other hand, P4VP-b-PPMA/ZnO nanocomposite film switches the memory characteristic to the dynamic random access memory behavior. The stretchable memory device prepared from the nanocomposite film can have a stretching durability over 40% strain and up to 1000 times cycling stretch-relaxation test. This work demonstrates a new strategy using nanocomposite films with tunable electrical characteristics and enhanced mechanical properties for stretchable electrical devices.

Synthesis of poly(phenylacetylene)s containing chiral phenylethyl carbamate residues as coated-type CSPs with high solvent tolerability.

Two novel helical poly(phenylacetylene) derivatives containing chiral phenylethyl carbamate residues in the end of each side chain (PPA-S and PPA-R) were synthesized by polymerization of the corresponding phenylacetylene monomers using Rh(nbd)BPh4 as a catalyst in DMF. The enantioseparation properties of the polymers were evaluated as coated-type chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). Under the same chromatographic conditions, PPA-S and PPA-R showed different enantioseparation properties, indicating that the different interactions between the analytes and the polymers, which result from the different chiral phenylethyl carbamate groups in the end of each side chains. Racemates 1, 7, and 8 could be better resolved on PPA-S, while racemate 6 was separated on PPA-R more efficiently. In addition, the coated-type CSPs showed good solvent tolerability and could work without any damage by introducing the polar solvents, such as CHCl3 and THF, in eluent. Moreover, some racemates could be better resolved on these coated-type CSPs with the addition of THF to the eluent.

Phase Transition Behaviors and Nanoscale Film Morphologies of Poly(δ-valerolactone) Axles Bearing Movable and Fixed Rotaxane Wheels.

In this study, poly(δ-valerolactone) (PVL) axles bearing movable and fixed dibenzo-24-crown-8-ether wheels (rot-M and rot-F) are investigated for the first time in the terms of phase transition and nanoscale film morphology: PVL-rot-M and PVL-rot-F. Interestingly, the PVL axles reveal a strong tendency to form a horizontal lamellar structure with three different rotational crystal lattice domains in nanoscale films. The morphological structural parameters are discernibly varied by the movable and fixed rotaxane wheels. In particular, the rot-M wheel tends to be populated in both the interfacial and amorphous layers. The rot-M wheel is found to significantly influence the phase transition characteristics of the PVL axle because of its movability along the polymer backbone chain. In contrast, the rot-F wheel tends to be more localized in the interfacial layer rather than in the amorphous layer because of its immovability constrained at the polymer chain end. The rot-F wheel causes severe thermal instability in the PVL axle, which can be attributed mainly to the presence of its counter anion (PF6 - ).

Dynamic Changes of Intracellular Monomer Levels Regulate Block Sequence of Polyhydroxyalkanoates in Engineered Escherichia coli.

Biological polymer synthetic systems, which utilize no template molecules, normally synthesize random copolymers. We report an exception, a synthesis of block polyhydroxyalkanoates (PHAs) in an engineered Escherichia coli. Using an engineered PHA synthase, block copolymers poly[(R)-2-hydroxybutyrate(2HB)-b-(R)-3-hydroxybutyrate(3HB)] were produced in E. coli. The covalent linkage between P(2HB) and P(3HB) segments was verified with solvent fractionation and microphase separation. Notably, the block sequence was generated under the simultaneous consumption of two monomer precursors, indicating the existence of a rapid monomer switching mechanism during polymerization. Based on in vivo metabolic intermediate analysis and the relevant in vitro enzymatic activities, we propose a model in which the rapid intracellular 3HB-CoA fluctuation during polymer synthesis is a major factor in generating block sequences. The dynamic change of intracellular monomer levels is a novel regulatory principle of monomer sequences of biopolymers.

One-Step Production of Amphiphilic Nanofibrillated Cellulose Using a Cellulose-Producing Bacterium.

Nanofibrillated bacterial cellulose (NFBC) is produced by culturing a cellulose-producing bacterium (Gluconacetobacter intermedius NEDO-01) with rotation or agitation in medium supplemented with carboxymethylcellulose (CMC). Despite a high yield and dispersibility in water, the product immediately aggregates in organic solvents. To broaden its applicability, we prepared amphiphilic NFBC by culturing strain NEDO-01 in medium supplemented with hydroxyethylcellulose or hydroxypropylcellulose instead of CMC. Transmission electron microscopy analysis revealed that the resultant materials (HE-NFBC and HP-NFBC, respectively) comprised relatively uniform fibers with diameters of 33 ± 7 and 42 ± 8 nm, respectively. HP-NFBC was dispersible in polar organic solvents such as methanol, acetone, isopropyl alcohol, acetonitrile, tetrahydrofuran (THF), and dimethylformamide, and was also dispersible in poly(methyl methacrylate) (PMMA) by solvent mixing using THF. HP-NFBC/PMMA composite films were highly transparent and had a higher tensile strength than neat PMMA film. Thus, HP-NFBC has a broad range of applications, including as a filler material.

Advanced functionalization of polyhydroxyalkanoate via the UV-initiated thiol-ene click reaction.

Polyhydroxyalkanoates (PHAs) incorporating vinyl-bearing 3-hydroxyalkanoates were prepared in 8.5-12.9 g L(-1) yield. The molar ratios (0-16 mol%) of the vinyl-bearing 3-hydroxyalkanoate derivatives were controlled by the continuous feeding of undecylenate at various concentrations. Subsequently, the PHAs were functionalized by UV-initiated thiol-ene click reaction and chemical modification. (1)H NMR spectra suggested that 3-mercaptopropionic acid and 2-aminoethanethiol were successfully introduced into the vinyl-bearing PHA. Subsequently, chemical modification using fluorescein or a fibronectin active fragment (GRGDS) was attempted. The former yielded a PHA derivative capable of emitting fluorescence under UV irradiation, which was useful for determining the miscibility of PHA in a composite film comprising poly-ʟ-lactic acid (PLLA) and PHA. In the latter case, PHA bearing GRGDS peptides exhibited cell adhesiveness, suggesting that its biocompatibility was improved upon peptide introduction. Taken together, the UV-initiated thiol-ene click reaction was demonstrated to be useful in PHA modification.

Temperature-Triggered Switchable Helix-Helix Inversion of Poly(phenylacetylene) Bearing l-Valine Ethyl Ester Pendants and Its Chiral Recognition Ability.

A phenylacetylene containing the l-valine ethyl ester pendant (PAA-Val) was synthesized and polymerized by an organorhodium catalyst (Rh(nbd)BPh4) to produce the corresponding one-handed helical cis-poly(phenylacetylene) (PPAA-Val). PPAA-Val showed a unique temperature-triggered switchable helix-sense in chloroform, while it was not observed in highly polar solvents, such as N,N'-dimethylformamide (DMF). By heating the solution of PPAA-Val in chloroform, the sign of the CD absorption became reversed, but recovered after cooling the solution to room temperature. Even after six cycles of the heating-cooling treatment, the helix sense of the PPAA-Val's backbone was still switchable without loss of the CD intensity. The PPAA-Val was then coated on silica gel particles to produce novel chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). These novel PPAA-Val based CSPs showed a high chiral recognition ability for racemic mandelonitrile (α = 2.18) and racemic trans-N,N'-diphenylcyclohexane-1,2-dicarboxamide (α = 2.60). Additionally, the one-handed helical cis-polyene backbone of PPAA-Val was irreversibly destroyed to afford PPAA-Val-H by heating in dimethyl sulfoxide (DMSO) accompanied by the complete disappearance of the Cotton effect. Although PPAA-Val-H had the same l-valine ethyl ester pendants as its cis-isomer PPAA-Val, it showed no chiral recognition. It was concluded that the one-handed helical cis-polyene backbone of PPAA-Val plays an important role in the chiral recognition ability.

Luminescent Coordination Glass: Remarkable Morphological Strategy for Assembled Eu(III) Complexes.

Syntheses of novel luminescent Eu(III) coordination glasses 1 ([Eu(hfa)3(o-dpeb)]2), 2 ([Eu(hfa)3(m-dpeb)]3), and 3 ([Eu(hfa)3(p-dpeb)]n) are reported. They are composed of Eu(III) ions, hexafluoroacetylacetonato (hfa) ligands, and unique bent-angled phosphine oxide (o-, m-, p-dpeb) ligands with ethynyl groups. Their coordination structures and glass formability are dependent on the regiochemistry of substitution in regard to the internal benzene core. Single-crystal X-ray analyses and DFT calculation reveals dinuclear, trinuclear, and polymer structures for Eu(III) coordination glasses 1, 2, and 3, respectively. Those compounds show characteristic glass-transition (Tg = 25-96 °C) and strong luminescence properties (ΦLn = 72-94%).

Influence of Helical Structure on Chiral Recognition of Poly(phenylacetylene)s Bearing Phenylcarbamate Residues of L-Phenylglycinol and Amide Linage as Pendants.

Four poly(phenylacetylene)s (PPA-1~4) bearing phenylcarbamate residues of L-phenylglycinol and amide linkage as pendants were prepared to be used as chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC), and the influences of coating solvents, dimethylformamide (DMF) and tetrahydrofuran (THF), which were used for coating the polymers on silica gel, on the helical structure of the polymers and their chiral recognition abilities were investigated. The structure analysis of PPA-1~4 by (1) H nuclear magnetic resonance (NMR), size exclusion chromatography (SEC), optical rotation, and circular dichroism (CD) spectra indicated that the polymers possess the cis-transoidal structure with dynamic helical conformation. The polymers in THF seem to have shorter conjugated helical main chains along with a tighter twist conformation than those in DMF. The chiral recognition abilities of PPA-1~4 with the different helical structures induced by the coating solvents were evaluated as the CSPs in HPLC. The helical structures of PPA-1~4 induced with THF are preferable for chiral recognition for some racemates compared to those induced with DMF, and higher chiral recognition abilities of PPA-1~ were achieved using THF.

Chemically Recyclable Unnatural (1→6)-Polysaccharides from Cellulose-Derived Levoglucosenone and Dihydrolevoglucosenone.

Unnatural polysaccharide analogs and their biological activities and material properties have attracted considerable research interest. However, these efforts often encounter challenges, especially those related to synthetic complexity and scalability. Here, we report the chemical synthesis of unnatural (1→6)-polysaccharides using levoglucosenone (LGO) and dihydrolevoglucosenone (Cyrene), which are derived from cellulose. Using a versatile monomer synthesis from LGO and Cyrene and cationic ring-opening polymerization, (1→6)-polysaccharides with various tailored substituent patterns are obtained. Additionally, environmentally benign and easy-to-handle organic Brønsted acid catalysts are investigated. This study demonstrates well-controlled first-order polymerization kinetics for the reactive (1S,5R)-6,8-dioxabicyclo[3,2,1]octane (DBO) monomer. The synthesized (1→6)-polysaccharides exhibit high thermal stability and form amorphous solids under ambient conditions, which could be processed into highly transparent self-standing films. Additionally, these polymers exhibit excellent closed-loop chemical recyclability. This study provides an important approach to explore the chemical spaces of unnatural polysaccharides and contributes to the development of sustainable polymer materials from abundant biomass resources.