Influence of Rheological Properties and Needle Size on Extrusion Forces of Hyaluronic Acid Based Soft Tissue Fillers.

BACKGROUND: To date no precise data are available for extrusion forces related to the G-prime and G-double-prime of fillers in combination with different 27G and 30G needles. Therefore, the objective of this study was to analyze extrusion forces of various product-needle-combinations containing two different 27G and two different 30G needles in combination with fillers of a wide range of elastic moduli starting from 2.0 – 166.0 Pa. MATERIAL AND METHODS: Four different fillers with the following elastic moduli 1.87, 11.65, 61.80, 165.50 Pa were combined with four different needles: 27G ½”, internal diameter: 0.300 μm; 27G ½”, internal diameter: 0.241 μm; 30G ½”, internal diameter: 0.241 μm and 30G ½“, internal diameter: 0.240 μm. Product-needle-combination were subjected to uni-axial mechanical testing and the respective extrusion force was measured. RESULTS: The results of this study revealed that the G-prime and the G-double-prime of a product are statistically significantly related to their extrusion force, with higher G-prime/G-double-prime products requiring higher extrusion forces. The results additionally revealed that whether the size of the needle was described as 27G or 30G by the respective manufacturer statistically significant differences between the measured extrusion forces were detected. CONCLUSION: Injectors need to be aware that not every 27G/30G needle has the same extrusion force even though the external diameter is similar (27G or 30G); this might additionally influence the ability to withdraw blood during a pre-injection aspiration manoeuvre. J Drugs Dermatol. 20(5): doi:10.36849/JDD.5237.

Digital Leg Volume Quantification: Precision Assessment of a Novel Workflow Based on Single Capture Three-dimensional Whole-Body Surface Imaging.

Whole-body three-dimensional surface imaging (3DSI) offers the ability to monitor morphologic changes in multiple areas without the need to individually scan every anatomical region of interest. One area of application is the digital quantification of leg volume. Certain types of morphology do not permit complete circumferential scan of the leg surface. A workflow capable of precisely estimating the missing data is therefore required. We thus aimed to describe and apply a novel workflow to collect bilateral leg volume measurements from whole-body 3D surface scans regardless of leg morphology and to assess workflow precision. For each study participant, whole-body 3DSI was conducted twice successively in a single session with subject repositioning between scans. Paired samples of bilateral leg volume were calculated from the 3D surface data, with workflow variations for complete and limited leg surface visibility. Workflow precision was assessed by calculating the relative percent differences between repeated leg volumes. A total of 82 subjects were included in this study. The mean relative differences between paired left and right leg volumes were 0.73 ± 0.62% and 0.82 ± 0.65%. The workflow variations for completely and partially visible leg surfaces yielded similarly low values. The workflow examined in this study provides a precise method to digitally monitor leg volume regardless of leg morphology. It could aid in objectively comparing medical treatment options of the leg in a clinical setting. Whole-body scans acquired using the described 3DSI routine may allow simultaneous assessment of other changes in body morphology after further validation.

Performing Distance Measurements in Curved Facial Regions: A Comparison between Three-Dimensional Surface Scanning and Ultrasound Imaging.

Facial flap surgery depends strongly on thorough preoperative planning and precise surgical performance. To increase the dimensional accuracy of transferred facial flaps, the methods of ultrasound and three-dimensional (3D) surface scanning offer great possibilities. This study aimed to compare different methods of measuring distances in the facial region and where they can be used reliably. The study population consisted of 20 volunteers (10 males and 10 females) with a mean age of 26.7 ± 7.2 years and a mean body mass index of 22.6 ± 2.2 kg/m2. Adhesives with a standardized length of 20 mm were measured in various facial regions through ultrasound and 3D surface scans, and the results were compared. Regardless of the facial region, the mean length measured through ultrasound was 18.83 mm, whereas it was 19.89 mm for 3D surface scans, with both p < 0.0001. Thus, the mean difference was 1.17 mm for ultrasound measurements and 0.11 mm for 3D surface scans. Curved facial regions show a great complexity when it comes to measuring distances due to the concavity and convexity of the face. Distance measurements through 3D surface scanning showed more accurate distances than the ultrasound measurement. Especially in "complex" facial regions (e.g., glabella region and labiomental sulcus), the 3D surface scanning showed clear advantages.

Evaluation of the Usability of a Low-Cost 3D Printer in a Tissue Engineering Approach for External Ear Reconstruction.

The use of alloplastic materials instead of autologous cartilage grafts offers a new perspective in craniofacial reconstructive surgery. Particularly for regenerative approaches, customized implants enable the surgeon to restore the cartilaginous framework of the ear without donor site morbidity. However, high development and production costs of commercially available implants impede clinical translation. For this reason, the usability of a low-cost 3D printer (Ultimaker 2+) as an inhouse-production tool for cheap surgical implants was investigated. The open software architecture of the 3D printer was modified in order to enable printing of biocompatible and biologically degradable polycaprolactone (PCL). Firstly, the printing accuracy and limitations of a PCL implant were compared to reference materials acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA). Then the self-made PCL-scaffold was seeded with adipose-tissue derived stem cells (ASCs), and biocompatibility was compared to a commercially available PCL-scaffold using a cell viability staining (FDA/PI) and a dsDNA quantification assay (PicoGreen). Secondly, porous and solid patient-customized ear constructs were manufactured from mirrored CT-imagining data using a computer-assisted design (CAD) and computer-assisted manufacturing (CAM) approach to evaluate printing accuracy and reproducibility. The results show that printing of a porous PCL scaffolds was possible, with an accuracy equivalent to the reference materials at an edge length of 10 mm and a pore size of 0.67 mm. Cell viability, adhesion, and proliferation of the ASCs were equivalent on self-made and the commercially available PCL-scaffolds. Patient-customized ear constructs could be produced well in solid form and with limited accuracy in porous form from all three thermoplastic materials. Printing dimensions and quality of the modified low-cost 3D printer are sufficient for selected tissue engineering applications, and the manufacturing of personalized ear models for surgical simulation at manufacturing costs of EUR 0.04 per cell culture scaffold and EUR 0.90 (0.56) per solid (porous) ear construct made from PCL. Therefore, in-house production of PCL-based tissue engineering scaffolds and surgical implants should be further investigated to facilitate the use of new materials and 3D printing in daily clinical routine.

Zone-Dependent Architecture and Biochemical Composition of Decellularized Porcine Nasal Cartilage Modulate the Activity of Adipose Tissue-Derived Stem Cells in Cartilage Regeneration.

Previous anatomical studies have shown different functional zones in human nasal septal cartilage (NC). These zones differ in respect to histological architecture and biochemical composition. The aim of this study was to investigate the influence of these zones on the fate of stem cells from a regenerative perspective. Therefore, decellularized porcine septal cartilage was prepared and subjected to histological assessment to demonstrate its equivalence to human cartilage. Decellularized porcine NC (DPNC) exposed distinct surfaces depending on two different histological zones: the outer surface (OS), which is equivalent to the superficial zone, and the inner surface (IS), which is equivalent to the central zone. Human adipose tissue-derived stem cells (ASCs) were isolated from the abdominal fat tissue of five female patients and were seeded on the IS and OS of DPNC, respectively. Cell seeding efficiency (CSE), vitality, proliferation, migration, the production of sulfated glycosaminoglycans (sGAG) and chondrogenic differentiation capacity were evaluated by histological staining (DAPI, Phalloidin, Live-Dead), biochemical assays (alamarBlue®, PicoGreen®, DMMB) and the quantification of gene expression (qPCR). Results show that cell vitality and CSE were not influenced by DPNC zones. ASCs, however, showed a significantly higher proliferation and elevated expression of early chondrogenic differentiation, as well as fibrocartilage markers, on the OS. On the contrary, there was a significantly higher upregulation of hypertrophy marker MMP13 (p < 0.0001) and GAG production (p = 0.0105) on the IS, whereas cell invasion into the three-dimensional DPNC was higher in comparison to the OS. We conclude that the zonal-dependent distinct architecture and composition of NC modulates activities of ASCs seeded on DPNC. These findings might be used for engineering of cartilage substitutes needed in facial reconstructive surgery that yield an equivalent histological and functional structure, such as native NC.

Intraarterial Degradation of Calcium Hydroxylapatite Using Sodium Thiosulfate - An In Vitro and Cadaveric Study.

BACKGROUND: The most severe complications following soft tissue filler injections result from the intraarterial administration of the filler product. Although hyaluronic acid-based filler can be trans-arterially dissolved with hyaluronidase, no information is available on calcium hydroxylapatite (CaHA)-based fillers. OBJECTIVE: The authors sought to test whether CaHA-based fillers can be trans-arterially dissolved by sodium thiosulfate (STS) when evaluated in cadaveric and in vitro models. METHODS: Human cadaveric facial arterial segments were each filled with 0.2 cc of commercially available CaHA product and submerged for 24 hours in 4 different STS-containing solutions: 10 cc STS (300 mg/cc) (pure, 1:1 dilution, 1:2 dilution), 0.9% saline and 10 cc STS (300 mg/cc), and 300 IU (bovine) hyaluronidase in a 1:1 ratio. RESULTS: Intraarterial CaHA was detected in human facial artery segments after 24 hours independent of the STS concentration employed. Submerging the arterial segments in STS (300 mg/cc) and 300 IU (bovine) hyaluronidase (1:1 ratio) also did not dissolve the intraarterial CaHA product. Gray scale analyses did show, however, that increasing concentrations of STS resulted in increased disintegration of CaHA in an in vitro experimental setting. CONCLUSIONS: The results of this study indicate that STS is limited in its potential to dissolve intraarterial CaHA of cadaveric human facial arteries, despite the fact that it appears effective when in direct contact with the CaHA. Adverse events caused by intraarterial administration of CaHA-based fillers still lack a suitable antidote.

Anatomy Behind the Facial Overfilled Syndrome: The Transverse Facial Septum.

BACKGROUND: The midface is an area of high demand for minimally invasive cosmetic procedures, that is, soft-tissue filler injections. OBJECTIVE: To investigate the functional anatomy behind the facial overfilled syndrome observed after soft-tissue filler injections. MATERIALS AND METHODS: The clinical part of the study enrolled 25 volunteers (12 men and 13 women, Caucasians); the anatomical part included 72 fresh frozen cephalic specimens obtained from 32 male and 40 female body donors. 3D surface scanning procedures were applied to calculate the maximal anterior projection of the midface. RESULTS: Upon smiling, the point of maximal anterior projection shifted cranially in men by 12.43 ± 8.8 mm (difference between resting and smiling; p < .001) and by 8.75 ± 4.1 mm in women (p < .001). Cadaveric dissections identified a septum originated from the underside of the zygomaticus major muscle forming a transversely running boundary between the buccal space and the deep midfacial fat compartments. CONCLUSION: Facial overfilled syndrome can potentially be explained by the presence of the transverse facial septum. Dynamic filling-injecting small amounts of filler and asking the patient to smile repeatedly during the procedure-seems to be a viable way to avoid this adverse event during soft-tissue filler injection.

Calculating the Thickness of the Superficial Fatty Layer of the Body Using Age, Gender, and Body Mass Index

BACKGROUND: Injections of biostimulator agents are increasing in popularity as an alternative to surgical or energy-based skin tightening procedures. The present study was designed to develop a formula that helps to guide health care providers injecting biostimulators into the correct plane to enhance effectiveness and longevity by targeting precisely the superficial fascial system. METHODS: 150 Caucasian individuals (75 males and 75 females) were investigated with a balanced distribution of age (n=30 per decade: 20­29, 30­39, 40­49, 50­59, and 60­69 years) and body mass index (n=50 per group: BMI≤24.9kg/m2, BMI between 25.0 and 29.9kg/m2 BMI≥30kg/m2). The distance between skin surface and the superficial fascia was measured via ultrasound in the buccal region, premasseteric region, the lateral neck, posterior arm, abdomen, buttocks, anterior thigh, medial thigh, and posterior thigh. RESULTS: Mean thickness of the superficial fatty layer is variable between the different locations investigated with smallest values for the lateral neck of 3.71mm ± 0.55 [range, 2.00­5.00mm] and greatest values for the gluteal region with 20.52mm±10.07 [range, 6.10­38.40mm]. A formula was developed to estimate the thickness of the superficial fatty layer based on the targeted region, age, gender, and body mass index of the patient: Thickness of superficial fatty layer (mm): Region constant + (XX* BMI) - (YY*Age). CONCLUSIONS: Injections of biostimulators deeper than the calculated values might result in reduced efficacy as the superficial fascial system is not targeted and the effected collagen neogenesis does not affect the skin surface. J Drugs Dermatol. 2020;19(1):36-44. doi:10.36849/JDD.2020.4619

Onset of occupational hand eczema among healthcare workers during the SARS-CoV-2 pandemic: Comparing a single surgical site with a COVID-19 intensive care unit.

BACKGROUND: As a result of the COVID-19 outbreak, hygiene regulations have been revised and hand sanitation has been intensified. OBJECTIVE: To investigate the onset of hand eczema during the COVID-19 pandemic in healthcare workers (HCWs) directly involved in intensive care of COVID-19 patients and HCWs without direct contact with COVID-19 patients. Hereby, we aim at increasing awareness about occupational hand eczema and preventive measures that can be adopted. METHOD: A survey was distributed amongst 114 HCWs at a single surgical centre and at a COVID-19 intensive care unit of the university hospital Ludwig Maximilian University Munich, Germany. Participants were questioned about the daily frequency of hand hygiene prior to and during the pandemic. Participants self-reported the onset of hand eczema and associated symptoms. RESULTS: Our study revealed a significant increase in hand washing, disinfection, and use of hand cream across all participants (P-value <.001), regardless of having direct contact with COVID-19 patients. A high prevalence of symptoms associated with acute hand dermatitis of 90.4% was found across all HCWs, whereas hand eczema itself was underreported (14.9%). CONCLUSION: The increase in hand sanitation during the COVID-19 pandemic impairs the skin of the hands across all HCWs, independent of direct intensive care of affected patients.

Relationship Between Vertical Glabellar Lines and the Supratrochlear and Supraorbital Arteries.

BACKGROUND: Glabellar soft tissue filler injections have been shown to be associated with a high risk of causing injection-related visual compromise. OBJECTIVES: The aim of this study was to identify the course of the superficial branch of the supratrochlear and of the deep branch of the supraorbital artery in relation to the ipsilateral vertical glabellar line and to test whether an artery is located deep to this line. METHODS: Forty-one healthy volunteers with a mean age of 26.17 [9.6] years and a mean BMI of 23.09 [2.3] kg/m2 were analyzed. Ultrasound imaging was applied to measure the diameters, distance from skin surface, distance between the midline, distance between vertical glabella lines, and the cutaneous projection of the supratrochlear/supraorbital arteries at rest and upon frowning. RESULTS: The mean distance between the superficial branch of the supratrochlear artery and the ipsilateral vertical glabellar line was 10.59 [4.0] mm in males and 8.21 [4.0] mm in females, whereas it was 22.38 [5.5] mm for the supraorbital artery in males and 20.73 [5.6] mm in females. Upon frowning, a medial shift in supratrochlear arterial position of 1.63 mm in males and 1.84 mm in females and of 3.9 mm in supraorbital arterial position for both genders was observed. The mean depth of the supratrochlear artery was 3.34 [0.6] mm at rest, whereas the depth of the supraorbital artery was 3.54 [0.8] mm. CONCLUSIONS: The hypothesis that injecting soft tissue fillers next to the vertical glabellar line is safe because the supratrochlear artery courses deep to the crease should be rejected. Additionally, the glabella and the supraorbital region should be considered as an area of mobile, rather than static, soft tissues.

Anatomy of the Superior and Inferior Labial Arteries Revised: An Ultrasound Investigation and Implication for Lip Volumization.

BACKGROUND: Lips are considered a key element of facial attractiveness due to their central position in the face and their elemental role in verbal and nonverbal communication. OBJECTIVES: The authors sought to provide clinically relevant information on the 3-dimensional pathway of the superior and inferior labial arteries within the lips to increase safety during labial soft tissue filler injections. METHODS: The study enrolled 41 healthy volunteers with a mean age of 26.17 ±â€…9.6 years and a mean body mass index of 23.09 ±â€…2.3 kg/m2. Ultrasound imaging was performed at 6 different locations. The position of the labial arteries within the lips, depth of the arteries, cranio-caudal location of each artery in relation to the vermilion border, and diameter of the superior/inferior labial arteries were recorded. RESULTS: The most frequent location of both the superior and inferior labial arteries was the submucosal plane (58.5%) followed by intramuscular (36.2%) and subcutaneous (5.3%) planes. The depth of the superior labial artery in the upper lip was 5.6 ±â€…0.13 mm, whereas the depth of the inferior labial artery in the lower lip was 5.2 ±â€…0.14 mm. Both arteries were more frequently located within the red lip: upper lip (83% vs 18.7%) and lower lip (86.2% vs 13.8%). In the midline, the artery coursed within the red lip in all investigated volunteers. CONCLUSIONS: Clinically, results of this study favor a superficial injection plane for lip volumization procedures. A perpendicular approach to the lip (coming from the cutaneous lip) might increase safety because the artery is located most frequently within the red lip.

Influences of Age, Gender, and Body Mass Index on the Depth of the Superficial Fascia of the Arm and Thigh.

BACKGROUND: Nonsurgical skin-tightening procedures are increasing in popularity because of their noninvasiveness as the energy is transdermally applied to the subcutaneous tissues. OBJECTIVE: To provide precise data on the depth of the superficial fascia for potentially safer and better targeted treatments of arms and thighs. METHODS: One hundred fifty Caucasian individuals were investigated with an equal distribution of men and women (each n = 75) and a balanced distribution of age (n = 30 per decade). Ultrasound-based measurements were conducted, measuring the distance between skin and the superficial fascia in the posterior arm and the anterior, medial, and posterior thigh. RESULTS: Deep to the skin, 5 layers were consistently and bilaterally identified in both sexes: skin, superficial fat, superficial fascia, deep fat, and deep fascia. The overall mean distance between the skin surface and the superficial fascia was for the posterior arm 4.38 ± 0.9 mm; range (2.60-6.70), for the anterior thigh 7.90 ± 2.3 mm range (3.50-13.20), for the medial thigh 5.74 ± 1.2 mm range (3.10-8.20), and for the posterior thigh 7.77 ± 3.2 mm range (3.60-14.50). CONCLUSION: Knowing the precise depth of the superficial fascia for nonsurgical skin-tightening procedures could potentially guide practitioners toward safer and more effective outcomes.

Influence of Age, Sex, and Body Mass Index on the Depth of the Superficial Fascia in the Face and Neck.

BACKGROUND: Nonsurgical skin-tightening procedures are increasing in popularity, as patients seek aesthetic interventions that are safe with minimal downtime. OBJECTIVE: This study was designed to provide precise data on the depth of the superficial fascia-the structure of action-of the face and neck. METHODS: One hundred fifty Caucasian individuals (75 men and 75 women) were investigated with a balanced distribution of age (n = 30 per decade: 20-29, 30-39, 40-49, 50-59, and 60-69 years) and body mass index (BMI) (n = 50 per group: BMI ≤ 24.9 kg/m, BMI between 25.0 and 29.9 kg/m, and BMI ≥ 30 kg/m). The distance between skin surface and the superficial fascia was measured through ultrasound in the buccal region, premasseteric region, and lateral neck. RESULTS: The mean distance between skin surface and superficial fascia was for the buccal region 4.82 ± 0.9 mm, range (2.60-6.90); for the premasseteric region 4.25 ± 0.6 mm, range (2.60-5.80); and for the lateral neck 3.71 ± 0.5 mm, range (2.0-5.0). The depth of the superficial fascia increased with increasing BMI, whereas it decreased with advanced age. CONCLUSION: Knowing the precise depth of the superficial fascia for nonsurgical skin-tightening procedures will guide practitioners toward safer and more effective outcomes.

Facial Safe Zones for Soft Tissue Filler Injections: A Practical Guide

OBJECTIVE: Vascular events are among the most dreaded complications of safe soft tissue filler injections. The aim of the present study is to present a practical guide for regional facial soft tissue filler injections, which is founded in anatomy and considers safety as its first priority. MATERIAL AND METHODS: The study sample consisted of 20 fresh (non-embalmed) hemi-faces from 10 Caucasian body donors (7 females, 3 males) with a mean age of 83.5±6.8 years and a mean BMI of 25.3±4.3 kg/m2. Injections of the upper, middle and lower faces of the body donors were performed using a commercially available hyaluronic acid based soft tissue filler. RESULTS: The results of the layer by layer dissections revealed that the injected material was separated from crucial neuro-vascular structures by fascial and/or muscular planes, which were not permeated by the product. Utilizing a single cutaneous access point per facial region, safe planes can be reached. CONCLUSION: This study provides a practical guide for safe soft tissue filler injections for the upper, middle, and lower face. Using cadaveric dissections and dyed product revealed that the targeted facial planes are separated either by fascial planes or by muscular tissue from arterial vasculature. J Drugs Dermatol. 2019;18(9):896-902.

Clinical Validation of the Surface Volume Coefficient for Minimally Invasive Treatment of the Temple

Objective: The aim of the present study is to compare the temporal surface volume coefficient obtained in the cadaveric model from subdermal and supraperiosteal injections to the clinical setting when treating temporal hollowing. Material and Methods: A total of 36 subjects were included in this investigation, 17 patients (16 females, 1 male; 46.3 ± 8.9 years; 25.5 ± 2.8 kg/m2) and 19 cadaveric specimens (11 females, 8 males; 76.4 ± 11.5 years; 24.0 ± 5.1 kg/m2). Subdermal and supraperiosteal injections were performed and live subjects were evaluated and followed for 12 months. The surface volume coefficients were calculated using 3D surface volume scanning and compared for validity. Results: No statistically significant difference was detected between the clinical outcome scores of the subdermal vs supraperiosteal injection technique. The supraperiosteal injection technique utilized significantly more product 1.20 ± 0.5 cc [range: 0.50 ­ 2.6 cc] compared to the subdermal 0.71 ± 0.2 cc [range: 0.30 ­ 1.20 cc] vs with P< 0.001. This difference was consistent with the different values of the cadaveric surface volume coefficient (subdermal vs supraperiosteal): 1.00 ± 0.2 vs 0.70 ± 0.2. At 12-month follow-up, the product loss was 19% for the subdermal injection and 21% for patients treated with supraperiosteal injections. Conclusion: The results of the study support the clinical validity of the surface volume coefficient. They demonstrate that the different injection volumes necessary to deliver aesthetically appealing results when utilizing the subdermal vs the supraperiosteal technique can be explained by the region-specific surface volume coefficient. J Drugs Dermatol. 2019;18(6):533-540.

3D Mammometric Changes in the Treatment of Idiopathic Gynecomastia.

BACKGROUND: Three-dimensional surface imaging (3DSI) has shown promise for plastic surgeons to objectively assess changes in body contour and breast volume. OBJECTIVES: To assess the surgical outcome after bilateral subcutaneous mastectomy (BSM) and water jet-assisted liposuction (WAL) as treatment for idiopathic gynecomastia, using 3DSI to document changes regarding nipple-areolar complex (NAC) and breast volume. METHODS: Thirty male patients (Simon II A to B) receiving BSM and WAL were enrolled. Eight subjects received additional mastopexy and NAC reduction. Use of a Vectra 3D Imaging System® before and 6 months after surgery provided data regarding changes of NAC placement and NAC and breast dimensions. The sum volume of intraoperatively approximated lipoaspirate before and after centrifugation and mastectomy specimens quantified using water displacement were compared with 3D-assessed differences in volume. RESULTS: When compared to the NAC dimensions defined during surgery, patients receiving NAC reductions showed nonsignificant postoperative changes in NAC dimensions. Patients without additional mastopexy showed a significant (p < 0.001) vertical (15.7 ± 14.3%) and horizontal (17.1 ± 15.0%) reduction in NAC diameter. 3D volume changes (92.8 ± 26.4 mL) showed significant differences (p < 0.001) 6 months after surgery compared to the intraoperatively measured lipoaspirate before (182 ± 54.5 mL) and after (120 ± 34.6 mL) centrifugation. CONCLUSION: Although it is clear that patient satisfaction must remain the prime focus of surgical body contouring, 3DSI has proven valuable to objectively demonstrate both the anticipated outcome and further findings regarding treatment of idiopathic gynecomastia. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Precision in 3-Dimensional Surface Imaging of the Face: A Handheld Scanner Comparison Performed in a Cadaveric Model.

BACKGROUND: Handheld 3-dimensional surface imaging (3DSI) devices of various precision are becoming more versatile in their applications and more widely accepted by clinicians for documentation. OBJECTIVES: The authors sought to compare the precision of facial volumetric change measurements of 3 3DSI devices in the cadaveric model: Eva (Artec 3D Inc., Luxembourg), Sense (3D Systems, Rock Hill, SC), and iSense (3D Systems, Rock Hill, SC). METHODS: A total of 336 scanning and analysis procedures were carried out in 4 cephalic specimens (mean age, 77.25 ± 24.3 years; mean BMI, 21.76 ± 6.6 kg/m2). Two superficial and 2 supraperiosteal regions of interest were injected with 0.5-cc aliquots and subsequently scanned using the 3 different scanners. Correlation coefficients between the injected and measured volume were computed. RESULTS: The correlation coefficient for the Eva scanner was for subcutaneous regions of interest rp = 0.935 and for the supraperiosteal regions of interest rp = 0.966, compared with rp = 0.760 and rp = 0.364 (superficial vs supraperiosteal) for the Sense and rp = 0.694 and rp = 0.382 (superficial vs supraperiosteal) for the iSense scanner. CONCLUSIONS: 3DSI devices are capable of measuring surface volume changes of the face at a level of 0.5-cc surface volume change and can thus be regarded as useful tools in the preinterventional, intrainterventional, and postinterventional phases of a treatment. One of the 3 evaluated scanners provided very high correlation coefficients between the injected and the measured volume (Eva), whereas the other evaluated 3DSI devices provided moderate (Sense) and low (iSense) coefficients.

Intracranial Penetration During Temporal Soft Tissue Filler Injection-Is It Possible?

BACKGROUND: Treating temporal volume loss for aesthetic and reconstructive purposes can be achieved by superficial or deep injections of soft tissue fillers into the temples. The latter is performed with bone contact that can lead to intracranial penetration when the bone is accidentally penetrated. OBJECTIVE: Based on a clinical case, the potential risk of accidental intracranial penetration was investigated. MATERIALS AND METHODS: Twenty fresh-frozen hemi-faces (all Caucasian ethnicity, 10 women, 10 men, mean age 72.8 ± 11.2 years) were investigated. Shape of pterion and bone-stability parameters of the temporal fossa were investigated. Bone stability was tested using uniaxial mechanical indentation (18-G, 1.25-mm diameter, 15-mm length blunt-tip device) until intracranial perforation occurred. RESULTS: Variations in the shape of the pterion, bone thickness, and density correlates were detected, however, without statistical significant differences in side symmetry. Minimum force necessary to penetrate intracranially was 40.4 N. Maximum force generated by an 18-g, 70-mm length blunt-tip cannula was 32.1 ± 4.2 N in 70 mm length and 75.3 ± 10.2 N in 15 mm length. CONCLUSION: Based on the results of this investigation, it can be concluded that there is a risk for intracranial penetration performing the deep temple injection technique with direct pressure on the bone.

Reevaluation of the arterial blood supply of the auricle.

The anatomical basis for auricular flaps used in multiple aesthetic and reconstructive procedures is currently based on a random distribution of the underlying arterial network. However, recent findings reveal a systematic pattern as opposed to the present concepts. Therefore, we designed this study to assess the arterial vascular pattern of the auricle in order to provide reliable data about the vascular map required for surgical interventions. Sixteen human auricles from eight body donors (five females/three males, 84.33 ± 9.0 years) were investigated using the unique 'Spalteholz' method. After arterial injection of silicone, a complete transparency of the tissue was achieved and the auricular arteries and branches were visible. Qualitative and quantitative evaluation of the arterial vascular pattern was performed. The superior and the inferior anterior auricular artery provided the vascular supply to the helical rim, forming an arcade, i.e. helical rim arcade. On the superior third of the helical rim another arcade was confirmed between the superior anterior auricular artery and the posterior auricular artery (PAA), i.e. the helical arcade. The perforators of the PAA were identified lying in a vertical line 1 cm posterior to the tragus, supplying the concha, inferior crus, triangular fossa, antihelix and the earlobe. The results of this study confirmed the constant presence of the helical rim arcade (Zilinsky-Cotofana), consistent perforating branches of the PAA, and the helical arcade (Erdman), and will help and guide physicians performing auricular surgeries toward fast and simple procedures with optimal patient satisfaction.

The Anatomy of the Aging Face: A Review.

Rejuvenative procedures of the face are increasing in numbers, and a plethora of different therapeutic options are available today. Every procedure should aim for the patient's safety first and then for natural and long-lasting results. The face is one of the most complex regions in the human body and research continuously reveals new insights into the complex interplay of the different participating structures. Bone, ligaments, muscles, fat, and skin are the key players in the layered arrangement of the face.Aging occurs in all involved facial structures but the onset and the speed of age-related changes differ between each specific structure, between each individual, and between different ethnic groups. Therefore, knowledge of age-related anatomy is crucial for a physician's work when trying to restore a youthful face.This review focuses on the current understanding of the anatomy of the human face and tries to elucidate the morphological changes during aging of bone, ligaments, muscles, and fat, and their role in rejuvenative procedures.