Adsorptive Features of Magnetic Activated Carbons Prepared by a One-Step Process towards Brilliant Blue Dye.

Water pollution by dyes has been a major environmental problem to be tackled, and magnetic adsorbents appear as promising alternatives to solve it. Herein, magnetic activated carbons were prepared by the single-step method from Sapelli wood sawdust, properly characterized, and applied as adsorbents for brilliant blue dye removal. In particular, two magnetic activated carbons, MAC1105 and MAC111, were prepared using the proportion of biomass KOH of 1:1 and varying the proportion of NiCl2 of 0.5 and 1. The characterization results demonstrated that the different proportions of NiCl2 mainly influenced the textural characteristics of the adsorbents. An increase in the surface area from 260.0 to 331.5 m2 g-1 and in the total pore volume from 0.075 to 0.095 cm3 g-1 was observed with the weight ratio of NiCl2. Both adsorbents exhibit ferromagnetic properties and the presence of nanostructured Ni particles. The different properties of the materials influenced the adsorption kinetics and equilibrium of brilliant blue dye. MAC111 showed faster kinetics, reaching the equilibrium in around 10 min, while for MAC1105, it took 60 min for the equilibrium to be reached. In addition, based on the Sips isotherm, the maximum adsorption capacity was 98.12 mg g-1 for MAC111, while for MAC1105, it was 60.73 mg g-1. Furthermore, MAC111 presented the potential to be reused in more adsorption cycles than MAC1105, and the use of the adsorbents in the treatment of a simulated effluent exhibited high effectiveness, with removal efficiencies of up to 90%.

Transformation of Residual Açai Fruit (Euterpe oleracea) Seeds into Porous Adsorbent for Efficient Removal of 2,4-Dichlorophenoxyacetic Acid Herbicide from Waters.

Brazil's production and consumption of açai pulp (Euterpe oleracea) occur on a large scale. Most of the fruit is formed by the pit, which generates countless tons of residual biomass. A new purpose for this biomass, making its consumption highly sustainable, was presented in this study, where activated carbon (AC) was produced with zinc chloride for later use as an adsorbent. AC carbon formed by carbon and with a yield of 28 % was satisfactorily used as an adsorbent in removing the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Removal efficiency was due to the highly porous surface (Vp = 0.467 cm3 g-1; Dp = 1.126 nm) and good surface área (SBET = 920.56 m2 g-1). The equilibrium data fit the Sips heterogeneous and homogeneous surface model better. It was observed that the increase in temperature favored adsorption, reaching a maximum experimental capacity of 218 mg g-1 at 328 K. The thermodynamic behavior indicated a spontaneous, favorable, and endothermic behavior. The magnitude of the enthalpy of adsorption was in agreement with the physical adsorption. Regardless of the herbicide concentration, the adsorbent displayed fast kinetics, reaching equilibrium within 120 min. The linear driving force (LDF) model provided a strong statistical match to the kinetic curves. AC with zinc chloride (ZnCl2), created from leftover açai biomass, is a potential alternative as an adsorbent for treating effluents containing 2,4-D.

Adsorption and Photocatalytic Degradation of Pesticides into Nanocomposites: A Review.

The extensive use of pesticides in agriculture has significantly impacted the environment and human health, as these pollutants are inadequately disposed of into water bodies. In addition, pesticides can cause adverse effects on humans and aquatic animals due to their incomplete removal from the aqueous medium by conventional wastewater treatments. Therefore, processes such as heterogeneous photocatalysis and adsorption by nanocomposites have received special attention in the scientific community due to their unique properties and ability to degrade and remove several organic pollutants, including pesticides. This report reviews the use of nanocomposites in pesticide adsorption and photocatalytic degradation from aqueous solutions. A bibliographic search was performed using the ScienceDirect, American Chemical Society (ACS), and Royal Society of Chemistry (RSC) indexes, using Boolean logic and the following descriptors: "pesticide degradation" AND "photocatalysis" AND "nanocomposites"; "nanocomposites" AND "pesticides" AND "adsorption". The search was limited to research article documents in the last ten years (from January 2012 to June 2022). The results made it possible to verify that the most dangerous pesticides are not the most commonly degraded/removed from wastewater. At the same time, the potential of the supported nanocatalysts and nanoadsorbents in the decontamination of wastewater-containing pesticides is confirmed once they present reduced bandgap energy, which occurs over a wide range of wavelengths. Moreover, due to the great affinity of the supported nanocatalysts with pesticides, better charge separation, high removal, and degradation values are reported for these organic compounds. Thus, the class of the nanocomposites investigated in this work, magnetic or not, can be characterized as suitable nanomaterials with potential and unique properties useful in heterogeneous photocatalysts and the adsorption of pesticides.

Valorization of Different Fractions from Butiá Pomace by Pyrolysis: H2 Generation and Use of the Biochars for CO2 Capture.

This work valorizes butiá pomace (Butia capitata) using pyrolysis to prepare CO2 adsorbents. Different fractions of the pomace, like fibers, endocarps, almonds, and deoiled almonds, were characterized and later pyrolyzed at 700 °C. Gas, bio-oil, and biochar fractions were collected and characterized. The results revealed that biochar, bio-oil, and gas yields depended on the type of pomace fraction (fibers, endocarps, almonds, and deoiled almonds). The higher biochar yield was obtained by endocarps (31.9%wt.). Furthermore, the gas fraction generated at 700 °C presented an H2 content higher than 80%vol regardless of the butiá fraction used as raw material. The biochars presented specific surface areas reaching 220.4 m2 g-1. Additionally, the endocarp-derived biochar presented a CO2 adsorption capacity of 66.43 mg g-1 at 25 °C and 1 bar, showing that this material could be an effective adsorbent to capture this greenhouse gas. Moreover, this capacity was maintained for 5 cycles. Biochars produced from butiá precursors without activation resulted in a higher surface area and better performance than some activated carbons reported in the literature. The results highlighted that pyrolysis could provide a green solution for butiá agro-industrial wastes, generating H2 and an adsorbent for CO2.

Guarana supplementation attenuated obesity, insulin resistance, and adipokines dysregulation induced by a standardized human Western diet via brown adipose tissue activation.

Obesity is a metabolic disorder associated with adverse health consequences that has increased worldwide at an epidemic rate. This has encouraged many people to utilize nonprescription herbal supplements for weight loss without knowledge of their safety or efficacy. However, mounting evidence has shown that some herbal supplements used for weight loss are associated with adverse effects. Guarana seed powder is a popular nonprescription dietary herb supplement marketed for weight loss, but no study has demonstrated its efficacy or safety when administered alone. Wistar rats were fed four different diets (low-fat diet and Western diet with or without guarana supplementation) for 18 weeks. Metabolic parameters, gut microbiota changes, and toxicity were then characterized. Guarana seed powder supplementation prevented weight gain, insulin resistance, and adipokine dysregulation induced by Western diet compared with the control diet. Guarana induced brown adipose tissue expansion, mitochondrial biogenesis, uncoupling protein-1 overexpression, AMPK activation, and minor changes in gut microbiota. Molecular docking suggested a direct activation of AMPK by four guarana compounds tested here. We propose that brown adipose tissue activation is one of the action mechanisms involved in guarana supplementation-induced weight loss and that direct AMPK activation may underlie this mechanism. In summary, guarana is an attractive potential therapeutic agent to treat obesity.

Development and characterization of blends formulated with banana peel and banana pulp for the production of blends powders rich in antioxidant properties.

The food product industry is increasingly looking for foods with nutritional properties that can provide health benefits. Additionally, a challenge for the food industry is the use of all raw materials. For these reasons, banana peel that is a raw material from Banana (Musa spp.) fruit emerges as potential for new food product development. Here, we developed powder blends using a lyophilization process for the preparation of flour to potential use in cookies, bread, and pasta products. Three formulations were designed; the main difference in the formulations was the use of banana peel concentration. Our results showed that blends produced with banana peel presented physical-chemical properties considered suitable for use in food industry. Moreover, the evaluated morphological parameters reveal the properties of the powders. The blends formulated with banana peel have more antioxidant properties, showing that the banana peel may be an attractive option to generate powders with high antioxidant properties.

Effects of methylmercury and retinol palmitate co-administration in rats during pregnancy and breastfeeding: Metabolic and redox parameters in dams and their offspring.

Ubiquitous low-dose methylmercury (MeHg) exposure through an increased fish consumption represents a global public health problem, especially among pregnant women. A plethora of micronutrients presented in fish affects MeHg uptake/distribution, but limited data is available. Vitamin A (VitA), another fish micronutrient is used in nutritional supplementation, especially during pregnancy. However, there is no information about the health effects arising from their combined exposure. Therefore, the present study aimed to examine the effects of both MeHg and retinyl palmitate administered on pregnant and lactating rats in metabolic and redox parameters from dams and their offspring. Thirty Wistar female rats were orally supplemented with MeHg (0,5 mg/kg/day) and retinyl palmitate (7500 µg RAE/kg/day) via gavage, either individually or in combination from the gestational day 0 to weaning. For dams (150 days old) and their offspring (31 days old), glycogen accumulation (hepatic and cardiac) and retinoid contents (plasma and liver) were analyzed. Hg deposition in liver tissue was quantified. Redox parameters (liver, kidney, and heart) were evaluated for both animals. Cytogenetic damage was analyzed with micronucleus test. Our results showed no general toxic or metabolic alterations in dams and their offspring by MeHg-VitA co-administration during pregnancy and lactation. However, increased lipoperoxidation in maternal liver and a disrupted pro-oxidant response in the heart of male pups was encountered, with apparently no particular effects in the antioxidant response in female offspring. GST activity in dam kidney was altered leading to possible redox disruption of this tissue with no alterations in offspring. Finally, the genomic damage was exacerbated in both male and female pups. In conclusion, low-dose MeHg exposure and retinyl palmitate supplementation during gestation and lactation produced a potentiated pro-oxidant effect, which was tissue-specific. Although this is a pre-clinical approach, we recommend precaution for pregnant women regarding food consumption, and we encourage more epidemiological studies to assess possible modulations effects of MeHg-VitA co-administration at safe or inadvertently used doses in humans, which may be related to specific pathologies in mothers and their children.

Guarana (Paullinia cupana Mart.) prevents ß-amyloid aggregation, generation of advanced glycation-end products (AGEs), and acrolein-induced cytotoxicity on human neuronal-like cells.

Advanced glycation end-products (AGEs) are considered potent molecules capable of promoting neuronal cell death and participating in the development of neurodegenerative disorders such as Alzheimer's disease (AD). Previous studies have shown that AGEs exacerbate ß-amyloid (Aß) aggregation and AGE-related cross-links are also detected in senile plaques. Acrolein (ACR) is an α, ß-unsaturated aldehyde found in the environment and thermally processed foods, which can additionally be generated through endogenous metabolism. The role of ACR in AD is widely accepted in the literature. Guarana (Paullinia cupana Mart.) is popularly consumed by the population in Brazil, mainly for its stimulant activity. In the present study, we showed that guarana (10, 100, and 1000 µg/mL) is able to prevent protein glycation, ß-amyloid aggregation, in vitro methylglyoxal, glyoxal, and ACR (20 µM)-induced toxicity on neuronal-like cells (SH-SY5Y). Since these are considered typical AD pathological hallmarks, we propose that guarana may deserve further research as a potential therapeutic agent in such a neurodegenerative disease.

The association effect of insulin and clonazepam on oxidative stress in liver of an experimental animal model of diabetes and depression.

CONTEXT: It is known that oxidative stress occurs in peripheral blood in an experimental animal model of diabetes and depression, and acute treatment with insulin and clonazepam (CNZ) has a protective effect on oxidative stress in this model. OBJECTIVE: This study evaluated the effect of insulin plus CNZ on oxidative stress parameters in the liver of diabetic male rats induced with streptozotocin (STZ) and subjected to forced swimming test (FST). MATERIALS AND METHODS: Diabetes was induced by a single intraperitoneal (i.p.) dose of STZ 60 mg/kg in male Wistar rats. Insulin (4 IU/kg) plus CNZ acute i.p. treatment (0.25 mg/kg) was administered 24, 5 and 1 h before the FST. Nondiabetic control rats received i.p. injections of saline (1 mL/kg). Protein oxidative damage was evaluated by carbonyl formation and the antioxidant redox parameters were analyzed by the measurements of enzymatic activities of the superoxide dismutase (SOD), catalase and glyoxalase I (GLO). Glycemia levels also were determined. RESULTS: Our present study has shown an increase in carbonyl content from diabetic rats subjected to FST (2.04 ± 0.55), while the activity of catalase (51.83 ± 19.02) and SOD (2.30 ± 1.23) were significantly decreased in liver from these animals, which were reverted by the treatment. Also, the activity of GLO (0.15 ± 0.02) in the liver of the animals was decreased. DISCUSSION AND CONCLUSION: Our findings showed that insulin plus CNZ acute treatment ameliorate the antioxidant redox parameters and protect against protein oxidative damage in the liver of diabetic rats subjected to FST.

Paraprobiotics and Postbiotics-Current State of Scientific Research and Future Trends toward the Development of Functional Foods.

The potential of paraprobiotics and postbiotics to be used as beneficial agents for human health has caused an effort by the scientific community to gather information about the bioactivity of these compounds and production methods. Understanding the evolution of scientific research in this area of study is important to understand the future perspectives and the main bottlenecks of scientific and technological development involving these compounds. In this scenario, this review work used a bibliometric analysis tool intending to improve the scientific documentation, bringing information and communicating the results to the scientific community through the quantitative analysis of the current literature, available in one of the main databases, the Web of Science, also providing recent information on the evolution and future perspectives in the field of paraprobiotic and postbiotic development. The results of this study showed that the main studies discuss the bioactivity of these compounds. Concerning the development of functional foods, there is a need for extensive research on production methods and the interaction of these compounds with food. However, it concluded that much still needs to be studied to prove the claims of bioactivity, especially when used for the development of functional foods.

Cassava bagasse as an alternative biosorbent to uptake methylene blue environmental pollutant from water.

Herein, the methylene blue (MB) biosorption from the agroindustrial residue (cassava bagasse) is reported. The cassava bagasse residue presented an irregular surface, anionic character, and low specific surface area. The experiments were performed in batch mode. The biosorption behavior was investigated through the experimental variables, initial concentration of MB, pH, and temperature. The maximum biosorption capacity (170.13 mg g-1) reached 328 K and pH 10.0. The equilibrium and kinetics were better fitted by the Sips and general order (R2 ≥ 0.997 and R2adj ≥ 0.996) models, respectively. Furthermore, the thermodynamic study revealed a spontaneous (ΔG0 < 0) and endothermic process. Finally, the results showed cassava bagasse is a potential material for biosorption dyes from the aqueous medium. In addition, the biosorbent has a low aggregate cost and high availability, which contributes to the destination of large amounts of waste and inspires engineering applications.

Highlighting the adsorption mechanism of dyes onto activated carbon derived from sludge by theoretical physical analysis.

An activated carbon (AC) deriving from sludge is used in this research for the adsorption of two water pollutants, namely Reactive Black 5 (RB5) and Green Alizarin (GA) dyes, at different temperatures. The adsorption capacities varied from 277.2 to 312.69 mg/g for GA and from 225.82 to 256.02 mg/g for RB5. Comparatively, this adsorbent presents good performances in removing these dyes from wastewater. The application of physical models to adsorption experiments is advantageous to provide new insights into the dyes' adsorption mechanism. A dedicated physical adsorption model suggests that RB5 and GA dyes are adsorbed in a monolayer. Moreover, the orientation of RB5 and GA dyes on AC resulted in an angled position, determining a multi-molecular process. In addition, both dyes are adsorbed by the occurrence of an aggregation process, forming a dimer. The impact of temperature can be also interpreted, allowing concluding that it plays a relevant role in removing these dyes. The calculation and interpretation of adsorption energies show that the dyes are removed via an endothermic process, and physical forces are involved.

Euterpe oleracea-based biochar for clonazepam adsorption: synthesis, characterization, adsorption properties, and toxicity assays.

The consumption of açaí fruit (Euterpe oleracea) has largely increased worldwide, resulting in a significant increase in the demand for its pulp. As a result, the small producing communities end up with large amounts of açaí endocarp residues, creating local environmental pollution problems. Therefore, chemical and physical routes were investigated for producing açaí endocarp adsorbents to propose a locally viable solution for this problem. The adsorption properties of the produced biochars were tested for clonazepam (CZM) removal, and the toxicity of the final solutions was evaluated. The results revealed that the chemical route generated biochar with about twice the surface area and pore volume (762 m2 g-1 and 0.098 cm3 g-1) than the physical route (498 m2 g-1 and 0.048 cm3 g-1). Furthermore, the Sips isotherm better described the CZM adsorption equilibrium for both biochars, with qs values of 26.94 and 61.86 mg g-1 for the physical- and chemical-activated adsorbents. Moreover, recycling studies were performed, and the chemical-activated biochar was stable for up to three cycles, reaching removal rates superior to 80%. Besides, the final toxicity decreased after the adsorptive treatment. Therefore, chemical activation can be used as a simple and effective method for producing stable and compelling adsorbents as an elegant way of adding value to the residues from açaí production, helping solve local environmental problems.

Citrus fruit residues as alternative precursors to developing H2O and CO2 activated carbons and its application for Cu(II) adsorption.

Due to its toxicity, the presence of Cu(II) ions released in aquatic environments presents a serious threat to the environment and human health. In search of sustainable and low-cost alternatives, there are citrus fruit residues, which are generated in large quantities by the juice industries and can be used to produce activated carbons. Therefore, the physical route was investigated for producing activated carbons to reuse citrus wastes. In this work, eight activated carbons were developed, varying the precursor (orange peel-OP, mandarine peel-MP, rangpur lime peel-RLP, and sweet lime peel-SLP) and the activating agent (CO2 and H2O) to remove Cu(II) ions of the aqueous medium. Results revealed promising activated carbons with a micro-mesoporous structure, a specific surface area of around 400 m2 g-1, and a pore volume of around 0.25 cm3 g-1. In addition, Cu (II) adsorption was favored at pH 5.5. The kinetic study showed that the equilibrium was reached within 60 min removing about 80% of Cu(II) ions. The Sips model was the most suitable for the equilibrium data, providing maximum adsorption capacities (qmS) values of 69.69, 70.27, 88.04, 67.83 mg g-1 for activated carbons (AC-CO2) from OP, MP, RLP, and SLP, respectively. The thermodynamic behavior showed that the adsorption process of Cu(II) ions was spontaneous, favorable, and endothermic. It was suggested that the mechanism was controlled by surface complexation and Cu2+-π interaction. Desorption was possible with an HCl solution (0.5 mol L-1). From the results obtained in this work, it is possible to infer that citrus residues could be successfully converted into efficient adsorbents to remove Cu(II) ions from aqueous solutions.

Wood waste-based functionalized natural hydrochar for the effective removal of Ce(III) ions from aqueous solution.

In this study, a sustainable and easily prepared hydrochar from wood waste was studied to adsorb and recover the rare earth element cerium (Ce(III)) from an aqueous solution. The results revealed that the hydrochar contains several surface functional groups (e.g., C-O, C = O, OH, COOH), which largely influenced its adsorption capacity. The effect of pH strongly influenced the Ce(III) removal, achieving its maximum removal efficiency at pH 6.0 and very low adsorption capacity under an acidic solution. The hydrochar proved to be highly efficient in Ce(III) adsorption reaching a maximum adsorption capacity of 327.9 mg g-1 at 298 K. The kinetic and equilibrium process were better fitted by the general order and Liu isotherm model, respectively. Possible mechanisms of Ce(III) adsorption on the hydrochar structure could be explained by electrostatic interactions and chelation between surface functional groups and the Ce(III). Furthermore, the hydrochar exhibited an excellent regeneration capacity upon using 1 mol L-1 of sulfuric acid (H2SO4) as eluent, and it was reused for three cycles without losing its adsorption performance. This research proposes a sustainable approach for developing an efficient adsorbent with excellent physicochemical and adsorption properties for Ce(III) removal.

Trends in Bioactive Multilayer Films: Perspectives in the Use of Polysaccharides, Proteins, and Carbohydrates with Natural Additives for Application in Food Packaging.

The harmful effects on the environment caused by the indiscriminate use of synthetic plastics and the inadequate management of post-consumer waste have given rise to efforts to redirect this consumption to bio-based economic models. In this sense, using biopolymers to produce materials is a reality for food packaging companies searching for technologies that allow these materials to compete with those from synthetic sources. This review paper focused on the recent trends in multilayer films with the perspective of using biopolymers and natural additives for application in food packaging. Firstly, the recent developments in the area were presented concisely. Then, the main biopolymers used (gelatin, chitosan, zein, polylactic acid) and main methods for multilayer film preparation were discussed, including the layer-by-layer, casting, compression, extrusion, and electrospinning methods. Furthermore, we highlighted the bioactive compounds and how they are inserted in the multilayer systems to form active biopolymeric food packaging. Furthermore, the advantages and drawbacks of multilayer packaging development are also discussed. Finally, the main trends and challenges in using multilayer systems are presented. Therefore, this review aims to bring updated information in an innovative approach to current research on food packaging materials, focusing on sustainable resources such as biopolymers and natural additives. In addition, it proposes viable production routes for improving the market competitiveness of biopolymer materials against synthetic materials.

Increased cerebral oxidative damage and decreased antioxidant defenses in ovariectomized and sham-operated rats supplemented with vitamin A.

Previous studies have linked oxidative stress with aging and aging-related processes, including menopause. Abnormalities in the redox state similar to those observed in menopausal women can be modeled experimentally with rat ovariectomy. The aim of the present study was to investigate the effects of vitamin A (retinol palmitate) supplementation (500 or 1,500 IU kg(-1) day(-1) for 30 days) on behavioral parameters and brain redox profile in ovariectomized (OVX) and sham-operated rats. Ovariectomy caused pronounced uterine atrophy and decreased locomotor/exploratory activity. Moreover, we found increased hypothalamic and frontal cortex superoxide dismutase/catalase (SOD/CAT) ratio and decreased hippocampal thiol content, accompanied by increased frontal cortex lipid oxidative damage (TBARS) in OVX rats. Vitamin A at 1,500 IUkg(-1) day(-1) decreased exploratory behavior and decreased total hippocampal thiol content in sham-operated rats, increased hippocampal SOD/CAT ratio and decreased total antioxidant potential in the hippocampus of both sham and OVX groups, and increased cortical TBARS levels in OVX rats. Thus, vitamin A may induce a pro-oxidant state in discrete brain regions of sham-operated and OVX rats. These results suggest some caution regarding the use of high doses of vitamin A supplementation during menopause.

L-NAME co-treatment prevent oxidative damage in the lung of adult Wistar rats treated with vitamin A supplementation.

Based on the fact that vitamin A in clinical doses is a potent pro-oxidant agent to the lungs, we investigated here the role of nitric oxide (NO•) in the disturbances affecting the lung redox environment in vitamin A-treated rats (retinol palmitate, doses of 1000-9000 IU•kg(-1)•day(-1)) for 28 days. Lung mitochondrial function and redox parameters, such as lipid peroxidation, protein carbonylation and the level of 3-nytrotyrosine, were quantified. We observed, for the first time, that vitamin A supplementation increases the levels of 3-nytrotyrosine in rat lung mitochondria. To determine whether nitric oxide (NO •) or its derivatives such as peroxynitrite (ONOO-) was involved in this damage, animals were co-treated with the nitric oxide synthase inhibitor L-NAME (30 mg•kg(-1), four times a week), and we analysed if this treatment prevented (or minimized) the biochemical disturbances resulting from vitamin A supplementation. We observed that L-NAME inhibited some effects caused by vitamin A supplementation. Nonetheless, L-NAME was not able to reverse completely the negative effects triggered by vitamin A supplementation, indicating that other factors rather than only NO• or ONOO- exert a prominent role in mediating the redox effects in the lung of rats that received vitamin A supplementation.

Highly Efficient Adsorption of Tetracycline Using Chitosan-Based Magnetic Adsorbent.

Herein, tetracycline adsorption employing magnetic chitosan (CS·Fe3O4) as the adsorbent is reported. The magnetic adsorbent was synthesized by the co-precipitation method and characterized through FTIR, XRD, SEM, and VSM analyses. The experimental data showed that the highest maximum adsorption capacity was reached at pH 7.0 (211.21 mg g-1). The efficiency of the magnetic adsorbent in tetracycline removal was dependent on the pH, initial concentration of adsorbate, and the adsorbent dosage. Additionally, the ionic strength showed a significant effect on the process. The equilibrium and kinetics studies demonstrate that Sips and Elovich models showed the best adjustment for experimental data, suggesting that the adsorption occurs in a heterogeneous surface and predominantly by chemical mechanisms. The experimental results suggest that tetracycline adsorption is mainly governed by the hydrogen bonds and cation-π interactions due to its pH dependence as well as the enhancement in the removal efficiency with the magnetite incorporation on the chitosan surface, respectively. Thermodynamic parameters indicate a spontaneous and exothermic process. Finally, magnetic chitosan proves to be efficient in TC removal even after several adsorption/desorption cycles.

A review of the main methods for composite adsorbents characterization.

Adsorption is a promising technology for removing several contaminants from aqueous matrices. In the last years, researchers worldwide have been working on developing composite adsorbents to overcome some limitations and drawbacks of conventional adsorbent materials, which depend on various factors, including the characteristics of the adsorbents. Therefore, it is essential to characterize the composite adsorbents to describe their properties and structure and elucidate the mechanisms, behavior, and phenomenons during the adsorption process. In this sense, this work aimed to review the main methods used for composite adsorbent characterization, providing valuable information on the importance of these techniques in developing new adsorbents. In this paper, we reviewed the following methods: X-Ray diffraction (XRD); spectroscopy; scanning electron microscopy (SEM); N2 adsorption/desorption isotherms (BET and BJH methods); thermogravimetry (TGA); point of zero charge (pHPZC); elemental analysis; proximate analysis; swelling and water retention capacities; desorption and reuse.