Simultaneous Voltammetric Detection of Carbaryl and Paraquat Pesticides on Graphene-Modified Boron-Doped Diamond Electrode.

Monitoring of pesticide residues in food, beverages, and the environment requires fast, versatile, and sensitive analyzing methods. Direct electrochemical detection of pesticides could represent an efficient solution. Adequate electrode material, electrochemical technique, and optimal operation parameters define the detection method for practical application. In this study, cyclic voltammetric and differential pulse voltammetric techniques were used in order to individually and simultaneously detect two pesticides, i.e., carbaryl (CR) and paraquat (PQ), from an acetate buffer solution and also from natural apple juice. A graphene-modified boron-doped diamond electrode, denoted BDDGR, was obtained and successfully applied in the simultaneous detection of CR and PQ pesticides, using the differential pulse voltammetric technique with remarkable electroanalytical parameters in terms of sensitivity: 33.27 μA μM −1 cm −2 for CR and 31.83 μA μM −1 cm −2 for PQ. These outstanding results obtained in the acetate buffer supporting electrolyte allowed us to simultaneously detect the targeted pesticides in natural apple juice.

Electrochemical Selective and Simultaneous Detection of Diclofenac and Ibuprofen in Aqueous Solution Using HKUST-1 Metal-Organic Framework-Carbon Nanofiber Composite Electrode.

In this study, the detection protocols for the individual, selective, and simultaneous determination of ibuprofen (IBP) and diclofenac (DCF) in aqueous solutions have been developed using HKUST-1 metal-organic framework-carbon nanofiber composite (HKUST-CNF) electrode. The morphological and electrical characterization of modified composite electrode prepared by film casting was studied by scanning electronic microscopy and four-point-probe methods. The electrochemical characterization of the electrode by cyclic voltammetry (CV) was considered the reference basis for the optimization of the operating conditions for chronoamperometry (CA) and multiple-pulsed amperometry (MPA). This electrode exhibited the possibility to selectively detect IBP and DCF by simple switching the detection potential using CA. However, the MPA operated under optimum working conditions of four potential levels selected based on CV shape in relation to the potential value, pulse time, and potential level number, and order allowed the selective/simultaneous detection of IBP and DCF characterized by the enhanced detection performance. For this application, the HKUST-CNF electrode exhibited a good stability and reproducibility of the results was achieved.

Electrochemical detection and degradation of ibuprofen from water on multi-walled carbon nanotubes-epoxy composite electrode.

This work describes the electrochemical behaviour of ibuprofen on two types of multi-walled carbon nanotubes based composite electrodes, i.e., multi-walled carbon nanotubes-epoxy (MWCNT) and silver-modified zeolite-multi-walled carbon nanotubes-epoxy (AgZMWCNT) composites electrodes. The composite electrodes were obtained using two-roll mill procedure. SEM images of surfaces of the composites revealed a homogeneous distribution of the composite components within the epoxy matrix. AgZMWCNT composite electrode exhibited the better electrical conductivity and larger electroactive surface area. The electrochemical determination of ibuprofen (IBP) was achieved using AgZMWCNT by cyclic voltammetry, differential-pulsed voltammetry, square-wave voltammetry and chronoamperometry. The IBP degradation occurred on both composite electrodes under controlled electrolysis at 1.2 and 1.75 V vs. Ag/AgCl, and IBP concentration was determined comparatively by differential-pulsed voltammetry, under optimized conditions using AgZMWCNT electrode and UV-Vis spectrophotometry methods to determine the IBP degradation performance for each electrode. AgZMWCNT electrode exhibited a dual character allowing a double application in IBP degradation process and its control.

Non-enzymatic electrochemical detection of glycerol on boron-doped diamond electrode.

A non-enzymatic direct electrochemical glycerol detection method at a commercial boron-doped diamond (BDD) electrode in 0.1 M NaOH supporting electrolyte was developed. All the used electrochemical techniques proved useful features for the oxidation and direct amperometric determination of glycerol at a BDD electrode in 0.1 M NaOH aqueous solution. It was found that the direct electrooxidation of glycerol on the BDD electrode requires both adsorbed glycerol and hydroxyls at the electrode surface. Also, the sp(2) carbon did not allow enhancement of the glycerol oxidation process. The electronalytical sensitivity for the determination of glycerol at the BDD electrode ranged from 0.040 to 0.226 µA mM(-1) as a function of the technique used. The highest electroanalytical sensitivity for the determination of glycerol at the BDD electrode was reached in batch system amperometric quantification under stirring conditions. Performed recovery studies indicated that it is possible to determine glycerol in real samples, and the proposed batch system analysis-based methodology can be a valuable tool for practical glycerol analysis.

Electrochemical determination of pentachlorophenol in water on a multi-wall carbon nanotubes-epoxy composite electrode.

The aim of this study was the preparation, characterization, and application of a multi-wall carbon nanotubes-epoxy composite electrode (MWCNT-EP) with 25%, wt. MWCNTs loading for the voltammetric/amperometric determination of pentachlorophenol (PCP) in aqueous solutions. The structural and morphological aspects of the MWCNT-EP composite electrode were examined by scanning electron microscopy. The electrical properties were characterized by direct-current conductivity measurements in relation with the percolation threshold. The electrochemical behavior of PCP at the MWCNT-EP composite electrode was investigated using cyclic voltammetry in 0.1 M Na2SO4 supporting electrolyte in order to establish the parameters for amperometric/voltammetric determination of PCP. The linear dependence of current vs. PCP concentrations was reached in a wide concentration range from 0.2 to 12 µM PCP using cyclic voltammetry, differential-pulsed voltammetry, square-wave voltammetry, chronoamperometry, and multiple-pulsed amperometry techniques. The best electroanalytical performances of this composite electrode were achieved using a pre-concentration/square-wave voltammetric technique and also multiple-pulsed amperometry techniques envisaging the practical applications. The ease of preparation, high sensitivity, and stability of this composite electrode should open novel avenues and applications for fabricating robust sensors for detection of many important species.

Electrosprayed metal oxide semiconductor films for sensitive and selective detection of hydrogen sulfide.

Semiconductor metal oxide films of copper-doped tin oxide (Cu-SnO(2)), tungsten oxide (WO(3)) and indium oxide (In(2)O(3)) were deposited on a platinum coated alumina substrate employing the electrostatic spray deposition technique (ESD). The morphology studied with scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows porous homogeneous films comprising uniformly distributed aggregates of nano particles. The X-ray diffraction technique (XRD) proves the formation of crystalline phases with no impurities. Besides, the Raman cartographies provided information about the structural homogeneity. Some of the films are highly sensitive to low concentrations of H(2)S (10 ppm) at low operating temperatures (100 and 200 °C) and the best response in terms of R(air)/R(gas) is given by Cu-SnO(2) films (2500) followed by WO(3) (1200) and In(2)O(3) (75). Moreover, all the films exhibit no cross-sensitivity to other reducing (SO(2)) or oxidizing (NO(2)) gases.

Mott-Schottky Analysis and Impedance Spectroscopy of TiO2/6T and ZnO/6T devices.

Schottky junctions have been realized by evaporating gold spots on top of sexithiophen (6T), which is deposited on TiO 2 or ZnO with e-beam and spray pyrolysis. Using Mott-Schottky analysis of 6T/TiO2 and 6T/ZnO devices acceptor densities of 4.5x10(16) and 3.7x10(16) cm(-3) are obtained, respectively. For 6T/TiO2 deposited with the e-beam evaporation a conductivity of 9x10(-8) S cm(-1) and a charge carrier mobility of 1.2x10(-5) cm2/V s is found. Impedance spectroscopy is used to model the sample response in detail in terms of resistances and capacitances. An equivalent circuit is derived from the impedance measurements. The high-frequency data are analyzed in terms of the space-charge capacitance. In these frequencies shallow acceptor states dominate the heterojunction time constant. The high-frequency RC time constant is 8 micros. Deep acceptor states are represented by a resistance and a CPE connected in series. The equivalent circuit is validated in the potential range (from -1.2 to 0.8 V) for 6T/ZnO obtained with spray pyrolysis.

Voltammetric Detection of Urea on an Ag-Modified Zeolite-Expanded Graphite-Epoxy Composite Electrode.

In this paper, a modified expanded graphite composite electrode based on natural zeolitic volcanic tuff modified with silver (EG-Ag-Z-Epoxy) was developed. Cyclic voltammetry measurements revealed a reasonably fast electron transfer and a good stability of the electrode in 0.1 M NaOH supporting electrolyte. This modified electrode exhibited moderate electrocatalytic effect towards urea oxidation, allowing its determination in aqueous solution. The linear dependence of the current versus urea concentration was reached using square-wave voltammetry in the concentrations range of urea between 0.2 to 1.4 mM, with a relatively low limit of detection of 0.05 mM. A moderate enhancement of electroanalytical sensitivity for the determination of urea at EG-Ag-Z-Epoxy electrode was reached by applying a chemical preconcentration step prior to voltammetric/amperometric quantification.

Carbon-based Composite Electrodes: Preparation, Characterization and Application in Electroanalysis.

Electrodes based on carbon, i.e., expanded graphite (20%, wt.)-epoxy composite(20EG-Epoxy) and expanded graphite (20%, wt.)-polystyrene composite (20EG-PS) havebeen prepared, characterized using scanning electron microscopy (SEM) and cyclicvoltammetry (CV), and tested as anodic sensors. The electrodes exhibited good mechanicalresistance and low electrical resistances. Scan rate dependent cyclic voltammetry responsesat 20EG-Epoxy and 20EG-PS composite electrodes, which were exemplified for thiourea(TU), a toxic sulphur organic compound selected as testing target analyte in 0.1 M Na2SO4 supporting electrolyte, were investigated. The obtained voltammetric data were inaccordance with those for a random array of microelectrodes. The voltammetric andchronoamperometric detection results of TU in tap water samples, without a supplementaryaddition of supporting electrolyte, at 20EG-Epoxy electrode proved its use for directanalysis of environmental samples.

In vitro and in vivo reactivity of porous, electrosprayed calcium phosphate coatings.

The dissolution and/or precipitation behaviour of porous calcium phosphate (CaP) coatings, deposited using electrostatic spray deposition (ESD), was investigated (a) in vitro after soaking in simulated body fluid (SBF) for several time periods (2, 4, 8, and 12 weeks), and (b) in vivo after subcutaneous implantation of CaP-coated implants in the back of goats for identical time periods. Physical and chemical properties of coatings were characterized before and after in vitro/vivo testing by means of scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and energy dispersive spectroscopy. Moreover, part of the explants was prepared for light microscopical evaluation of the tissue response. In vitro, all apatitic ESD-coatings induced the formation of homogeneous and adherent CaP precipitation layers. Amorphous CaP, however, displayed a delayed precipitation of poorly adherent CaP layers, whereas heterogeneous calcification was observed on top of beta-TCP-coated substrates, indicating that beta-TCP and amorphous CaP coatings exhibit a poor ability of inducing calcification in SBF as compared to crystalline apatitic coatings. In vivo, no adverse tissue reactions (toxic effects/inflammatory cells) were observed using light microscopy, and all coatings became surrounded by a dense, fibrous tissue capsule after implantation. All ESD-coatings degraded gradually at a dissolution rate depending on the chemical phase (order of relative solubility: amorphous CaP approximately carbonate apatite>beta-TCP>carbonated hydroxyapatite), thereby enabling synthesis of CaP coatings with a tailored degradation rate.

Photoluminescence study of sexithiophene thin films.

To determine the exciton diffusion length of sexithiophene (6T) thin films, quenching of the photoluminescence (PL) of vacuum-deposited 6T films on TiO2 and on quartz has been investigated. For films with a thickness of more than 22 nm and at temperatures below 100 K, additional PL lines appear in luminescence spectra. This feature is related to the structural properties of 6T films. The PL intensity is thermally activated with an activation energy of 18 meV on TiO2 and 6 meV on quartz. When 6T is applied on TiO2, exciton quenching occurs for films up to 120 nm. For 6T on quartz this value is reduced to 60 nm. By comparing the relative luminescence intensities of 6T on quartz and on TiO2 substrates, an exciton diffusion length of 60 +/- 5 nm is derived.

Dithiacrown Ether Substituted Porphyrazines: Synthesis, Single-Crystal Structure, and Control of Aggregation in Solution by Complexation of Transition-Metal Ions.

The synthesis of novel magnesium, copper, and metal-free porphyrazines, peripherally substituted with dithia-7-crown-2 (MPz(7)), dithia-15-crown-5 (MPz(15)), and dithia-18-crown-6 (MPz(18)) macrocycles is reported. These compounds are prepared starting from dicyanoethylene containing crown ethers 3, 2(1), and 2(2), respectively, which contain sulfur as well as oxygen heteroatoms. The "crowned" porphyrazines bind silver(I) and mercury(II) perchlorates. UV/vis spectroscopy and electron paramagnetic resonance measurements reveal that addition of the transition-metal ions leads to dimerization of the porphyrazine complexes. In the case of the dithia-18-crown-6-substituted porphyrazines, the dimers break up to form monomeric 6:1 guest-host complexes when more than 2 equiv of the metal ion is added. The single-crystal structures of the crown ether 2(2) and the porphyrazine MgPz(18) are presented. Compound C(14)H(20)N(2)O(4)S(2) (2(2)) crystallizes in the monoclinic space group P2(1)/c with a = 10.9310(13) Å, b = 19.383(3) Å, c = 8.6976(14) Å, beta = 108.898(11) degrees, V = 1743.5(5) Å(3), and Z = 4. The structure refinement converged to R = 0.0366 and R(w) = 0.0504. Compound C(56)H(82)MgN(8)O(17)S(8) (MgPz(18)) crystallizes in the triclinic space group P&onemacr; with a = 9.584(3) Å, b = 17.672(2) Å, c = 19.620(4) Å, alpha = 84.904(14) degrees, beta = 85.21(2) degrees, gamma = 89.29(2) degrees, V = 3298.4(13) Å(3), and Z = 2. The structure refinement converged to R1 = 0.0839 and wR2 = 0.2196. The electrical properties of H(2)Pz(18) have been studied by complex impedance spectroscopy. The bulk electrical conductivity of this compound is approximately 1 order of magnitude higher than that of the corresponding 18-crown-6 phthalocyanine.

Atomic scale verification of oxide-ion vacancy distribution near a single grain boundary in YSZ.

This study presents atomic scale characterization of grain boundary defect structure in a functional oxide with implications for a wide range of electrochemical and electronic behavior. Indeed, grain boundary engineering can alter transport and kinetic properties by several orders of magnitude. Here we report experimental observation and determination of oxide-ion vacancy concentration near the Σ13 (510)/[001] symmetric tilt grain-boundary of YSZ bicrystal using aberration-corrected TEM operated under negative spherical aberration coefficient imaging condition. We show significant oxygen deficiency due to segregation of oxide-ion vacancies near the grain-boundary core with half-width < 0.6 nm. Electron energy loss spectroscopy measurements with scanning TEM indicated increased oxide-ion vacancy concentration at the grain boundary core. Oxide-ion density distribution near a grain boundary simulated by molecular dynamics corroborated well with experimental results. Such column-by-column quantification of defect concentration in functional materials can provide new insights that may lead to engineered grain boundaries designed for specific functionalities.

Silver-functionalized carbon nanofiber composite electrodes for ibuprofen detection.

The aim of this study is to prepare and characterize two types of silver-functionalized carbon nanofiber (CNF) composite electrodes, i.e., silver-decorated CNF-epoxy and silver-modified natural zeolite-CNF-epoxy composite electrodes suitable for ibuprofen detection in aqueous solution. Ag carbon nanotube composite electrode exhibited the best electroanalytical parameters through applying preconcentration/differential-pulsed voltammetry scheme.

Copper-decorated carbon nanotubes-based composite electrodes for nonenzymatic detection of glucose.

The aim of this study was to prepare three types of multiwall carbon nanotubes (CNT)-based composite electrodes and to modify their surface by copper electrodeposition for nonenzymatic oxidation and determination of glucose from aqueous solution. Copper-decorated multiwall carbon nanotubes composite electrode (Cu/CNT-epoxy) exhibited the highest sensitivity to glucose determination.

Simultaneous electrochemical determination of nitrate and nitrite in aqueous solution using Ag-doped zeolite-expanded graphite-epoxy electrode.

In this work a new electrochemical sensor based on an Ag-doped zeolite-expanded graphite-epoxy composite electrode (AgZEGE) was evaluated as a novel alternative for the simultaneous quantitative determination of nitrate and nitrite in aqueous solutions. Cyclic voltammetry was used to characterize the electrochemical behavior of the electrode in the presence of individual or mixtures of nitrate and nitrite anions in 0.1M Na(2)SO(4) supporting electrolyte. Linear dependences of current versus nitrate and nitrite concentrations were obtained for the concentration ranges of 1-10mM for nitrate and 0.1-1mM for nitrite using cyclic voltammetry (CV), chronoamperometry (CA), and multiple-pulsed amperometry (MPA) procedures. The comparative assessment of the electrochemical behavior of the individual anions and mixtures of anions on this modified electrode allowed determining the working conditions for the simultaneous detection of the nitrite and nitrate anions. Applying MPA allowed enhancement of the sensitivity for direct and indirect nitrate detection and also for nitrite detection. The proposed sensor was applied in tap water samples spiked with known nitrate and nitrite concentrations and the results were in agreement with those obtained by a comparative spectrophotometric method. This work demonstrates that using multiple-pulse amperometry with the Ag-doped zeolite-expanded graphite-epoxy composite electrode provides a real opportunity for the simultaneous detection of nitrite and nitrate in aqueous solutions.

Study of electronic defects in CdSe quantum dots and their involvement in quantum dot solar cells.

To enhance efficiencies of quantum dot CdSe/TiO(2) based solar cells, understanding of the space charge at the CdSe/TiO(2) interface is crucial. In this paper, the presence of a shallow acceptor in the CdSe quantum dots is found by means of a detailed impedance and Mott-Schottky (C(-2)-phi) study. Furthermore, it is clearly shown that this acceptor density decreases strongly with increasing quantum dot size. The presence of these defect states may give rise to Auger recombination in small quantum dots and therewith decrease the efficiency of quantum-dot-sensitized solar cells.

High-density storage of H2 in microporous crystalline silica at ambient conditions.

Molecular hydrogen was encapsulated in the cages of clathrasil decadodecasil 3R (DD3R) during the hydrothermal synthesis of this microporous silicate. The crystalline structure of DD3R facilitates high-density hydrogen storage at ambient conditions. Prompt gamma activation analysis (PGAA) revealed that on average about one molecule of H2 is trapped in each (5(12)) cage of DD3R. The presence of molecular hydrogen inside the DD3R framework was confirmed by solid-state 1H NMR spectroscopy. Temperature-programmed decomposition (TPD) in combination with mass spectrometry showed that the encapsulated hydrogen is released upon decomposition of the clathrasil structure. This release can be promoted by the presence of water.

Nanocomposite three-dimensional solar cells obtained by chemical spray deposition.

The present study is focused on low-cost preparation of thin film TiO2/CuInS2 nanocomposite three-dimensional (3D) solar cells. With the aid of a simple spray deposition method, we have been able to obtain 3D solar cells, with a remarkable energy conversion efficiency of 5%. The new 3D solar cell design has the potential to breakdown the price barrier and to open up new production technologies for low-cost photovoltaic solar cells.

Extensive migration of Ni and Mn by lithiation of ordered LiMg0.1Ni0.4Mn(1.5)O4 spinel.

Li(x)Mg(0.1)Ni(0.4)Mn(1.5)O(4) spinel (P4(3)32) was chemically and electrochemically lithiated in the range 1 < x