Polarization-maintaining Yb-doped large-mode-area fully aperiodic large-pitch fibers.

Based on a special large-pitch architecture that has already proved its single-mode single-polarization behavior in a passive configuration, two ytterbium-doped versions of such large-mode-area fibers have been fabricated and tested in both laser and amplification configurations for high-power laser source applications. Due to the high sensitivity of large-pitch fiber design to the active-core-to-passive-cladding index mismatch, the realization of a single-polarization structure is highly challenging. However, we report on the preservation of a polarization-maintaining feature. A linear polarization with an extinction ratio of 17 dB is demonstrated for mode field diameters reaching up to 58 µm as long as the single-modeness of the emitted signal is preserved.

Broadband single-mode single-polarization passive fully aperiodic large-pitch fibers.

Two evolutions of fully aperiodic large-pitch fiber designs employing few stress-applying parts are presented. The induced elasto-optic stress discriminates the two orthogonal polarization modes (LP01x and LP01y) of the fundamental mode, selectively delocalizing one of them into the cladding via a suitable coupling to one or several cladding modes. This ensures the propagation of a single linear polarization mode. For the largest core dimensions, however, the applied stress can strongly influence the intensity distributions of core modes, and a tailored design process must thwart this. The polarization properties are investigated experimentally with core scalability over a large spectral bandwidth into passive structures, leading to the evidencing of a single-mode single polarization over a large span from 1 to 1.6 µm with a core dimension of 80 µm and, notably, at 1400 nm for a core dimension of 140 µm. The polarization extinction ratio is also determined.

Experimental study of the mode instability onset threshold in high-power FA-LPF lasers.

We report here on an experimental investigation of the temporal behavior of transverse mode instabilities into "fully aperiodic large-pitch fibers" (FA-LPFs) operated in high-power continuous-wave laser configuration. To ensure an effective transverse single-mode emission into FA-LPFs, a perfect index matching between the active core and the background cladding materials (Δn=0) is required. The original design of such fibers enables an effective transverse single-mode emission by strengthening the higher-order mode delocalization out of the gain region, even for high heat load levels, consequently leading to the improvement of the beam spatial quality. The study was conducted over fibers of various gain region diameters, from 58 to 100 µm, for a refractive index mismatch Δn of about +8×10-5. The emitted beam is characterized using both M2 measurements and time traces to study the changeover of a stable temporal behavior to an unstable one.

140 µm single-polarization passive fully aperiodic large-pitch fibers operating near 2 µm.

In this paper, we demonstrate a single-polarization feature out of passive very-large-mode-area fully aperiodic large-pitch fibers. It has been previously shown theoretically that one of the two polarizations of the fundamental mode is selectively coupled to a cladding mode. This coupling does not require fiber bending, which permits us to avoid any decrease in mode effective area. The coupling is achieved owing to boron-doped silica inclusions implemented into the microstructured cladding and acting as stress-applying parts. This mechanism has been assessed experimentally in this work using fibers of two different core diameters: 60 µm and 140 µm, providing mode field areas of 3637 µm2 and 14,590 µm2, respectively, at 1942 nm. The tested fibers have a length of 45 cm and an outer diameter exceeding 1 mm, yielding rod-type fibers. Each sample has been characterized using an unpolarized laser source emitting at 1942 nm. This laser, based on a thulium-doped large-mode-area step-index fiber, has a spectral bandwidth of about 0.5 nm. After passing through a piece of the passive fiber, a polarization extinction ratio higher than 16 dB has been achieved.

50.4% slope efficiency thulium-doped large-mode-area fiber laser fabricated by powder technology.

We report on a triple clad large-mode-area Tm-doped fiber laser with 18 µm core diameter manufactured for the first time by an alternative manufacturing process named REPUSIL. This reactive powder sinter material enables similar properties compared to conventional CVD-made fiber lasers, while offering the potential of producing larger and more uniform material. The fiber characterization in a laser configuration provides a slope efficiency of 47.7% at 20°C, and 50.4% at 0°C with 8 W output power, with a laser peak emission at 1970 nm. Finally, a beam quality near the diffraction-limit (M(x,y)2<1.1) is proved.

Precompensation of the thermal-induced refractive index changes into a fully aperiodic LPF for heat load resilience.

In this paper, a strategy consisting of precompensating the thermal-induced transverse refractive index changes is undertaken to push further the appearance threshold of a multimode regime. First, a standard air-silica large pitch fiber (LPF) and a fully aperiodic large pitch fiber are confronted in regard to their heat load resilience and capabilities for single-mode emission. Thereafter, slight refractive index depressions are judiciously introduced into the active core area. This approach enhances the delocalization of the high-order modes even under severe heat load levels. This combination of aperiodic cladding microstructuration and index-precompensation theoretically increases the multimode regime threshold while preserving large mode field areas. This investigation is performed at 1.03 and 2 µm operating wavelengths.

Demonstration of a homogeneous Yb-doped core fully aperiodic large-pitch fiber laser.

The first demonstration of a 40 µm core homogeneously ytterbium-doped fully aperiodic large-pitch fiber laser, to the best of our knowledge, is reported here. In this concept, the amplification of unwanted high-order modes is prevented by means of an aperiodic inner-cladding structure, while the core and inner-cladding material has a higher refractive index than pure silica. In a laser configuration, up to 252 W of extracted power, together with an optical-to-optical efficiency of 63% with respect to the incident pump power, have been achieved. While an average M2 of 1.4 was measured, the emitted power becomes temporally unstable when exceeding 95 W, owing to the occurrence of modal instabilities.

Fabry-Perot cavity based on silica tube for strain sensing at high temperatures.

In this work, a Fabry-Perot cavity based on a new silica tube design is proposed. The tube presents a cladding with a thickness of ~14 µm and a hollow core. The presence of four small rods, of ~20 µm diameter each, placed in diametrically opposite positions ensure the mechanical stability of the tube. The cavity, formed by splicing a section of the silica tube between two sections of single mode fiber, is characterized in strain and temperature (from room temperature to 900 °C). When the sensor is exposed to high temperatures, there is a change in the response to strain. The influence of the thermal annealing is investigated in order to improve the sensing head performance.

Mode-resolved gain analysis and lasing in multi-supermode multi-core fiber laser.

Multi-core fibers (MCFs) with coupled-cores are attractive large-mode area (LMA) specialty fiber designs that support the propagation of a few transverse modes often called supermodes (SMs). Compared to other LMA fibers, the uniqueness of MCF arises from the higher degrees of design space offered by a multitude of core-array geometries, resulting in extended flexibility to tailor SM properties. To date, the use of MCF as gain media has focused on lasers that operate in only one selected SM, typically the lowest order in-phase SM, which considerably limited the potential of these multi-core structures. Here, we expand the potential of MCF lasers by investigating multi-SM amplification and lasing schemes. Amplifier and laser systems using a 7 coupled-cores Yb-doped MCF as gain medium were successfully designed and assembled. Individual SM could be decomposed using the correlation filter technique mode analysis and the modal amplification factors (γi) were recorded. With access to amplification characteristics of individual transverse modes, a monolithic MCF laser was demonstrated that operates simultaneously on the two SMs carrying the highest optical gain.

High temperature sensing with fiber Bragg gratings in sapphire-derived all-glass optical fibers.

A structured sapphire-derived all-glass optical fiber with an aluminum content in the core of up to 50 mol% was used for fiber Bragg grating inscription. The fiber provided a parabolic refractive index profile. Fiber Bragg gratings were inscribed by means of femtosecond-laser pulses with a wavelength of 400 nm in combination with a two-beam phase mask interferometer. Heating experiments demonstrated the stability of the gratings for temperatures up to 950°C for more than 24 h without degradation in reflectivity.

Highly efficient higher-order modes filtering into aperiodic very large mode area fibers for single-mode propagation.

We report here on the first experimental demonstration, to the best of our knowledge, of a new generation of very large mode area (VLMA) fibers intended to strengthen single-mode propagation. The originality of this work relies on an aperiodicity of the inner cladding microstructuration exacerbating the spatial rejection of higher-order-modes (HOMs) while preserving a significant confinement of the fundamental mode. The single-mode behavior was demonstrated using an optical low-coherence interferometry measurement based on the group-velocity dispersion. As suggested through a preliminary numerical approach, this outstanding characteristic/behavior is evidenced over a large spectral range spanning from 1 to 2 µm for a core diameter of 60 µm. Core scalability was also investigated.

Inner cladding microstructuration based on symmetry reduction for improvement of singlemode robustness in VLMA fiber.

Very large mode area, active optical fibers with a low high order mode content in the actively doped core region were designed by removing the inner cladding symmetry. The relevance of the numerical approach is demonstrated here by the investigation of a standard air-silica Large Pitch Fiber, used as a reference. A detailed study of all-solid structures is also performed. Finally, we propose new kinds of geometry for 50 µm core, all-solid microstructured fibers enabling a robust singlemode laser emission from 400 nm to 2200 nm.

Whispering gallery mode microsphere resonator integrated inside a microstructured optical fiber.

A compact and robust scheme for broadband excitation of whispering gallery mode (WGM) resonances into a microsphere is demonstrated. A polymer microsphere (10 µm) is encapsulated into the capillary of a microstructured optical fiber, in direct contact with the guiding core. Such a configuration allows efficient and reproducible excitation of the in-MOF-microsphere resonator that is characterized by two launch/collection schemes: core input/scattering output, and sphere input/core output. The latter allows an excitation of the microsphere WGMs externally to the fiber. Numerically calculated WGM spectra are in agreement with experiments. Q factors in the range of 10(3) are typically measured.

Towards the control of highly sensitive Fabry-Pérot strain sensor based on hollow-core ring photonic crystal fiber.

A high sensitivity Fabry-Pérot (FP) strain sensor based on hollow-core ring photonic crystal fiber was investigated. A low-finesse FP cavity was fabricated by splicing a section of hollow-core ring photonic crystal fiber between two standard single mode fibers. The geometry presents a low cross section area of silica enabling to achieve high strain sensitivity. Strain measurements were performed by considering the FP cavity length in a range of 1000 µm. The total length of the strain gauge at which strain was applied was also studied for a range of 900 mm. The FP cavity length variation highly influenced the strain sensitivity, and for a length of 13 µm a sensitivity of 15.4 pm/µÎµ was attained. Relatively to the strain gauge length, its dependence to strain sensitivity is low. Finally, the FP cavity presented residual temperature sensitivity (~0.81 pm/°C).

Multicore fiber with integrated fiber Bragg gratings for background-free Raman sensing.

In the last years a variety of fiber optic Raman probes emerged, which are only partly suited for in vivo applications. The in vivo capability is often limited by the bulkiness of the probes. The size is associated with the required filtering of the probes, which is necessary due to Raman scattering inside the fibers. We employed in-line fiber Bragg gratings (FBG) as notch filter for the collection path and integrated them in a novel type of Raman probe. Multicore singlemode fibers (MCSMF) were designed and drawn integrating 19 singlemode cores to achieve better collection efficiency. A Raman probe was assembled with one excitation fiber and six MCSMF with inscribed FBGs as collection fibers. The probe was characterized regarding Raman background suppression, collection efficiency, and distance dependence. First Raman measurements on brain tissue are presented.

Multicorelike guidance in a triangular-core hollow optical fiber and spectral evolution of its eigenmode degeneracy.

A unique multicorelike guidance was achieved in a microstructured optical fiber composed of a circular air hole at the center surrounded by a high-index triangular core. Unique spectral evolution of the degeneracy was theoretically investigated using a vectorial finite element method to find a threefold degeneracy in both the fundamental and the first excited modes in the visible range, which evolved to twofold degeneracy as the wavelength increased to IR. Experimental measurements also confirmed evolution of the modal intensity from three spatially isolated patterns confined to individual corners into a supermode combining the three corners.

Spatial optical filter sensor based on hollow-core silica tube.

A spatial optical filter based on a hollow-core silica tube is proposed. Because of the hollow-core dimensions, it is possible to obtain a periodical spatial filter ranging from 1200 to 1700 nm with a channel spacing of 2.64 THz. The bandwidth is approximately 5.32 nm, and the isolation loss is ~30 dB. The optical losses are approximately ~0.67 dB/mm for a wavelength of 1500 nm. The 40 mm long spatial optical filter is tested as a sensing element and subjected to different physical parameters. The spatial optical filter is wavelength sensitive to strain and temperature, while for refractive-index variations there is an optical power dependency. This fiber structure can be used as a sensing element for extreme conditions, such as in very high temperature environments, where it presents a sensitivity of 27.5 pm °C(-1).

Simultaneous measurement of partial pressure of O2 and CO2 with a hybrid interferometer.

In this Letter, a hybrid interferometer for simultaneous measurement of the partial pressures of O2 and CO2 mixtures is reported. The sensing head consists in the combination of two interferometric structures, one a Fabry-Pérrot cavity and the other a modal interferometer. The intrinsic Fabry-Pérot was formed by splicing a single mode fiber with a graded index fiber length that was then subjected to chemical etching creating an air cavity. The second interferometer is based on a splice of a pure silica tube in series with the Fabry-Pérot. It was observed for a particular gas that its refractive index changes with pressure variation in a specific way, a characteristic that permitted the simultaneous measurement of partial pressures of CO2 and O2 with rms deviations of ~±48.7 kPa and ~±20.1 kPa, respectively.

Polarization instability of ultrashort pulses as a source of vectorial supercontinuum.

Polarization instability (PI) of ultrashort light pulses, giving rise to vectorial supercontinuum generation, is demonstrated using a subwavelength-core, highly birefringent, normally dispersive optical fiber. The evolution of ultrashort pulses in the regime of PI is shown to radically differ from polarization-instability dynamics of cw fields and longer laser pulses. As the peak power of the laser field decreases along the propagation path due to dispersion-induced pulse stretching, the Poincaré-sphere map of field dynamics is shown to evolve from the behavior typical of PI in the highly nonlinear regime toward the beating dynamics of uncoupled polarization modes, characteristic of low field intensities and cw fields.

Light bullets in waveguide arrays: spacetime-coupling, spectral symmetry breaking and superluminal decay [Invited].

We investigate the effects of the space-time coupling (STC) on the nonlinear formation and propagation of Light Bullets, spatiotemporal solitons in which dispersion and diffraction along all dimensions are balanced by nonlinearity, through periodic media with a weak transverse modulation of the refractive index, i.e. waveguide arrays. The STC arises from wavelength dependence of the strength of inter-waveguide coupling and can be tuned by variation of the array geometry. We show experimentally and numerically that the STC breaks the spectral symmetry of Light Bullets to a considerable degree and modifies their group velocity, leading to superluminal propagation when the Light Bullets decay.