RESUMO
PURPOSE: The purpose of this study was to investigate the potential of a doubled semitendinosus (ST) and a single gracilis tendon (GT) lateral meniscus autograft to restore the knee joint kinematics and tibiofemoral contact after total lateral meniscectomy (LMM). METHODS: Fourteen human knee joints were tested intact, after LMM and after ST and GT meniscus autograft treatment under an axial load of 200 N during full range of motion (0°-120°) and four randomised loading situations: without external moments, external rotation, valgus stress and a combination of external rotation and valgus stress using a knee joint simulator. Non-parametric statistical analyses were performed on joint kinematics and on the tibiofemoral contact mechanics. RESULTS: LMM led to significant rotational instability of the knee joints (p < 0.02), which was significantly improved after ST autograft application (p < 0.04), except for knee joint flexions > 60°. The GT autograft failed to restore the joint kinematics. LMM significantly increased the tibiofemoral contact pressure (p < 0.03), while decreasing the contact area (p < 0.05). The ST autograft was able to restore the contact mechanics after LMM (p < 0.02), while the GT replacement displayed only an improvement trend. CONCLUSION: The doubled ST lateral meniscus autograft improved the knee joint kinematics significantly and restored the tibiofemoral contact mechanics almost comparable to the native situation. Thus, from a biomechanical point of view, ST meniscus autografts might be a potential treatment alternative for patients who are indicated for meniscus allograft transplantation.
Assuntos
Músculos Isquiossurais , Lesões do Menisco Tibial , Humanos , Fenômenos Biomecânicos , Cadáver , Articulação do Joelho/cirurgia , Meniscectomia , Meniscos Tibiais/cirurgia , Amplitude de Movimento Articular , Tíbia/cirurgia , Lesões do Menisco Tibial/cirurgiaRESUMO
In this study, we report the beneficial effects of a newly identified dermal cell subpopulation expressing the ATP-binding cassette subfamily B member 5 (ABCB5) for the therapy of nonhealing wounds. Local administration of dermal ABCB5+ -derived mesenchymal stem cells (MSCs) attenuated macrophage-dominated inflammation and thereby accelerated healing of full-thickness excisional wounds in the iron-overload mouse model mimicking the nonhealing state of human venous leg ulcers. The observed beneficial effects were due to interleukin-1 receptor antagonist (IL-1RA) secreted by ABCB5+ -derived MSCs, which dampened inflammation and shifted the prevalence of unrestrained proinflammatory M1 macrophages toward repair promoting anti-inflammatory M2 macrophages at the wound site. The beneficial anti-inflammatory effect of IL-1RA released from ABCB5+ -derived MSCs on human wound macrophages was conserved in humanized NOD-scid IL2rγ null mice. In conclusion, human dermal ABCB5+ cells represent a novel, easily accessible, and marker-enriched source of MSCs, which holds substantial promise to successfully treat chronic nonhealing wounds in humans. Stem Cells 2019;37:1057-1074.
Assuntos
Subfamília B de Transportador de Cassetes de Ligação de ATP/metabolismo , Derme/metabolismo , Proteína Antagonista do Receptor de Interleucina 1/metabolismo , Sobrecarga de Ferro/metabolismo , Úlcera da Perna/metabolismo , Células-Tronco Mesenquimais/metabolismo , Cicatrização , Animais , Linhagem Celular , Derme/patologia , Modelos Animais de Doenças , Feminino , Humanos , Sobrecarga de Ferro/patologia , Úlcera da Perna/patologia , Células-Tronco Mesenquimais/patologia , Camundongos , Camundongos Endogâmicos NOD , Camundongos SCIDRESUMO
PURPOSE: The aim of the present study was to analyse which clinical, radiological and arthroscopic findings are able to predict the postoperative outcome after arthroscopic partial meniscectomy. Furthermore, the present study aimed to investigate the postoperative outcome after partial meniscectomy in patients with degenerative meniscal lesions. METHODS: A total of 91 patients with a follow-up period of 34.7 ± 11.4 months after arthroscopic partial meniscectomy were included in this retrospective study. Clinical, radiological, and arthroscopic data were analysed at the time of follow-up. The multivariable linear regression analysis for postoperative outcome, based on the Western Ontario Meniscal Evaluation Tool (WOMET), included age, gender, body mass index, physical activity, presence of cartilage lesions, leg alignment, grade of radiographic osteoarthritis, location of meniscal lesions, meniscal extrusion, meniscal degeneration, presence of an anterior cruciate ligament tears as well as bone marrow lesions. RESULTS: WOMET and WOMAC scores showed a significant improvement of 45.0 ± 48.1 points (CI 34.9-55.1; p ≤ 0.0001) and 75.1 ± 69.3 points (CI 60.6-89.6; p = 0.001) within the follow-up period. Multivariable linear regression analysis showed that poor preoperative WOMET scores (p = 0.001), presence of cartilage lesions at the medial femoral condylus (p = 0.001), meniscal degeneration (p = 0.008), the presence of an anterior cruciate ligament lesion (p = 0.005), and lateral meniscal tears (p = 0.039) were associated with worse postoperative outcomes. Patients with femoral bone marrow lesions had better outcome (p = 0.038). CONCLUSION: Poor preoperative WOMET scores, presence of cartilage lesions at the medial femoral condylus, meniscal degeneration, concomitant anterior cruciate ligament lesions as well as lateral meniscal tears are correlated with worse postoperative outcomes after arthroscopic partial meniscectomy. Patients with femoral bone marrow lesions femoral are more likely to gain benefit from arthroscopic partial meniscectomy in the middle term. Despite justified recent restrictions in indication, arthroscopic partial meniscectomy seems to effectively reduce pain and alleviate symptoms in carefully selected patients with degenerative meniscal tears. LEVEL OF EVIDENCE: III.
Assuntos
Artroscopia/métodos , Meniscectomia/métodos , Lesões do Menisco Tibial/cirurgia , Adulto , Idoso , Ligamento Cruzado Anterior/patologia , Lesões do Ligamento Cruzado Anterior/epidemiologia , Lesões do Ligamento Cruzado Anterior/cirurgia , Cartilagem Articular/patologia , Exercício Físico , Feminino , Fêmur/patologia , Humanos , Traumatismos do Joelho/cirurgia , Masculino , Meniscos Tibiais/patologia , Meniscos Tibiais/cirurgia , Pessoa de Meia-Idade , Osteoartrite/epidemiologia , Estudos Retrospectivos , Lesões do Menisco Tibial/patologia , Resultado do TratamentoRESUMO
PURPOSE: This systematic review intends to give an overview of the current knowledge on how allografts used for the reconstruction of cruciate ligaments and menisci are integrated and specifically perform regarding their biomechanical function. METHODS: Two reviewers reviewed the PubMed and Central Cochrane library with focus on the biomechanical integration of tendon ligament and meniscus allografts. The literature search was conducted in accordance with the PRISMA statement for reporting systematic reviews and meta-analyses. RESULTS: The analysed literature on tendon allografts shows that they are more vulnerable to overstretching in the phase of degradation compared to autografts as the revascularization process starts later and takes longer. Therefore, to avoid excessive graft loads, allografts for cruciate ligament replacement should be selected that exhibit much higher failure loads than the native ligaments to counteract the detrimental effect of degradation. Further, placement techniques should be considered that result in a minimum of strain differences during knee joint motion, which is best achieved by near-isometric placement. The most important biomechanical parameters for meniscus allograft transplantation are secure fixation and proper graft sizing. Allograft attachment by bone plugs or by a bone block is superior to circumferential suturing and enables the allograft to restore the chondroprotective biomechanical function. Graft sizing is also of major relevance, because too small grafts are not able to compensate the knee joint incongruity and too large grafts may fail due to extrusion. Only adequate sizing and fixation together can lead to a biomechanically functioning allograft. The objective assessment of the biomechanical quality of allografts in a clinical setting is challenging, but would be highly desirable for monitoring the remodelling and incorporation process. CONCLUSIONS: Currently, indicators like ap-stability after ACL reconstruction or meniscal extrusion represent only indirect measures for biomechanical graft integration. These parameters are at best clinical indicators of allograft function, but the overall integration properties comprising e.g. fixation and graft stiffness remain unknown. Therefore, future research should e.g. focus on advanced imaging techniques or other non-invasive methods allowing for in vivo assessment of biomechanical allograft properties.
Assuntos
Aloenxertos , Fenômenos Biomecânicos/fisiologia , Articulação do Joelho/fisiologia , Meniscos Tibiais/transplante , Tendões/transplante , Animais , Reconstrução do Ligamento Cruzado Anterior , Humanos , Meniscos Tibiais/cirurgiaRESUMO
PURPOSE: The purpose of this study was to quantify the effect of clinically relevant open-wedge high tibial osteotomies on medial collateral ligament (MCL) strain and the resultant tibiofemoral contact mechanics during knee extension and 30° knee flexion. METHODS: Six human cadaveric knee joints were axially loaded (1 kN) in knee extension and 30° knee flexion. Strains at the anterior and posterior regions of the MCL were determined using strain gauges. Tibiofemoral contact mechanics (contact area, mean and maximum contact pressure) were investigated using pressure-sensitive sensors. Open-wedge osteotomy was performed using biplanar cuts and osteotomy angles of 5° and 10° were maintained using an external fixator. Tests were performed first with intact and then with dissected MCL. RESULTS: Nonparametric statistical analyses indicated a significant strain increase (p < 0.01) in the anterior and posterior fibres of the MCL with increasing osteotomy angle of up to 8.3% and 6.0%, respectively. Only after releasing the MCL the desired lateralisation of the mechanical axis was achieved, indicating a significant decrease in the maximum contact pressure in knee extension of - 25% (p = 0.028) and 30° knee flexion of - 21% (p = 0.027). CONCLUSIONS: The results of the present biomechanical study suggest, that an open-wedge high tibial osteotomy is most effective in reducing the medial contact pressure when spreading the osteotomy to 10° and concomitantly releasing the MCL. To transfer the results of this biomechanical study to the clinical day-to-day practice, it is necessary to factor in the individual ligamentous laxity of each patient into the treatment options e.g. particularly for patients with distinct knee ligament laxity or medial ligamentary instability, the release of the MCL should be performed with care. LEVEL OF EVIDENCE: Controlled laboratory study.
Assuntos
Articulação do Joelho/cirurgia , Ligamento Colateral Médio do Joelho/fisiologia , Ligamento Colateral Médio do Joelho/cirurgia , Osteotomia/métodos , Tíbia/cirurgia , Idoso , Fenômenos Biomecânicos , Cadáver , Fixadores Externos , Fáscia , Feminino , Humanos , Instabilidade Articular , Masculino , Pessoa de Meia-Idade , Estresse MecânicoRESUMO
PURPOSE: Numerous studies investigated the reasons for premature osteoarthritis due to partial meniscectomy (PM). However, the influence of meniscectomy on attachment forces and superficial strain of the tibial meniscus is unclear. It is hypothesised that these parameters depend on the degree of PM. METHODS: Six porcine medial menisci were placed in a custom made apparatus, and each meniscal attachment was connected to a force sensor. After printing markers onto the tibial meniscal surfaces, the menisci were positioned on a glass plate enabling optical superficial strain measurement. Additionally, contact area and pressure were investigated. Each meniscus was axially loaded up to 650 N using its respective femoral condyle. Testing was conducted intact and after 50 and 75% PM of the posterior horn and extending 75% PM to the anterior horn. RESULTS: With increasing meniscectomy, the attachment forces decreased anteriorly by up to 17% (n.s.) and posteriorly by up to 55% (p = 0.003). The circumferential strain in the peripheral meniscal zones was not affected by the meniscectomy, while in some meniscal zones the radial strain changed from compression to tension. Contact area decreased by up to 23% (p = 0.01), resulting in an increase in 40% (p = 0.02) for the maximum contact pressure. CONCLUSION: Partial meniscectomy significantly alters the loading situation of the meniscus and its attachments. Specifically, the attachment forces decreased with increasing amount of meniscal tissue loss, which reflects the impaired ability of the meniscus to transform axial joint load into meniscal hoop stress.
Assuntos
Articulação do Joelho/fisiologia , Articulação do Joelho/cirurgia , Meniscos Tibiais/fisiologia , Meniscos Tibiais/cirurgia , Animais , Fenômenos Biomecânicos , Pressão , Estresse Mecânico , Suínos , Suporte de CargaRESUMO
PURPOSE: To investigate the 3D displacement and the local strain of the medial meniscus and its attachments under compressive loading. MATERIALS AND METHODS: Magnetic resonance imaging (MRI) scans of six porcine knee joints were performed under unloaded and loaded conditions (100% and 200% body weight [BW]). Volumes were registered to obtain a 3D displacement field of the medial meniscus and its attachments, which were divided into five anatomic compartments. Finally, displacements of the center of mass of each compartment and the local strain were analyzed. RESULTS: The meniscus and its attachments significantly displaced by up to 2.6 ± 1.2 mm (P < 0.01) under knee joint loads of 200% BW. An increase of 0.9 mm in the distance between posterior and anterior horn (P < 0.001) was observed. The meniscus and its attachment showed an average radial stretch of 0.6%, an average circumferential stretch of 0.9%, and an average axial compression of 11.6% at 200% BW. CONCLUSION: High-resolution MRI was successfully combined with image registration to investigate the displacement and strain of the meniscus and its attachments under compression. The results of this study contribute to the basic understanding of meniscal movement which may impact the design of meniscal implants and the validation of finite element models in the future.
Assuntos
Força Compressiva/fisiologia , Aumento da Imagem/métodos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Imageamento por Ressonância Magnética/métodos , Meniscos Tibiais/fisiologia , Suporte de Carga/fisiologia , Animais , Elasticidade , Articulação do Joelho/fisiologia , Imagens de Fantasmas , SuínosRESUMO
The association of knee joint osteoarthritis and altered frictional properties of the degenerated cartilage remains ambiguous, because previous in vitro studies did not consider the characteristic loads and velocities during gait. Therefore, the aim of this study was to quantify the friction behavior of degenerated human cartilage under characteristic stance and swing phase conditions. A dynamic pin-on-plate tribometer was used to test the tribological systems of cartilage against cartilage and cartilage against glass, both with synthetic synovial fluid as lubricant. Using the International Cartilage Repair Society classification, the cartilage samples were assigned to a mildly or a severely degenerated group before testing. Friction coefficients were calculated under stance and swing phase conditions at the beginning of the test and after 600 s of testing. The most important finding of this study is that cartilage against glass couplings displayed significantly higher friction for the severely degenerated samples compared to the mildly degenerated ones, whereas cartilage against cartilage couplings only indicated slight tendencies under the observed test conditions. Consequently, care should be taken when transferring in vitro findings from cartilage against cartilage couplings to predict the friction behavior in vivo. Therefore, we recommend in vitro tribological testing methods which account for gait-like loading conditions and to replicate physiological material pairings, particularly in preclinical medical device validation studies.
Assuntos
Cartilagem Articular , Osteoartrite do Joelho , Humanos , Fricção , Cartilagem Articular/fisiologia , Articulação do Joelho , Líquido Sinovial/fisiologia , Estresse MecânicoRESUMO
The demand for engineered scaffolds capable of delivering multiple cues to cells continues to grow as the interplay between cell fate with microenvironmental and external cues is revealed. Emphasis has been given to develop stimuli-responsive scaffolds. These scaffolds are designed to sense an external stimulus triggering a specific response (e.g., change in the microenvironment, release therapeutics, etc.) and then initiate/modulate a desired biofunction. Here, magnetic-responsive carboxylated multi-walled carbon nanotubes (cMWCNTs) are integrated into 3D collagen/polylactic acid (PLA) scaffold via a reproducible filtration-based method. The integrity and biomechanical performance of the collagen/PLA scaffolds are preserved after cMWCNT integration. In vitro safety assessment of cMWCNT/collagen/PLA scaffolds shows neither cytotoxicity effects nor macrophage pro-inflammatory response, supporting further in vitro studies. The cMWCNT/collagen/PLA scaffolds enhance chondrocytes metabolic activity while maintaining high cell viability and extracellular matrix (i.e., type II collagen and aggrecan) production. Comprehensive in vitro study applying static and pulsed magnetic field on seeded scaffolds shows no specific cell response in dependence with the applied field. This result is independent of the presence or absence of cMWCNT into the collagen/PLA scaffolds. Taken together, these findings provide additional evidence of the benefits to exploit the CNTs outstanding properties in the design of stimuli-responsive scaffolds.
Assuntos
Nanotubos de Carbono , Engenharia Tecidual , Engenharia Tecidual/métodos , Alicerces Teciduais , Colágeno , Poliésteres , Fenômenos MagnéticosRESUMO
The aim of this biomechanical in vitro study was to answer the question whether the meniscus acts as a shock absorber in the knee joint or not. The soft tissue of fourteen porcine knee joints was removed, leaving the capsuloligamentous structures intact. The joints were mounted in 45° neutral knee flexion in a previously validated droptower setup. Six joints were exposed to an impact load of 3.54 J, and the resultant loss factor (η) was calculated. Then, the setup was modified to allow sinusoidal loading under dynamic mechanical analysis (DMA) conditions. The remaining eight knee joints were exposed to 10 frequencies ranging from 0.1 to 5 Hz at a static load of 1210 N and a superimposed sinusoidal load of 910 N (2.12 times body weight). Forces (F) and deformation (l) were continuously recorded, and the loss factor (tan δ) was calculated. For both experiments, four meniscus states (intact, medial posterior root avulsion, medial meniscectomy, and total lateral and medial meniscectomy) were investigated. During the droptower experiments, the intact state indicated a loss factor of η = 0.1. Except for the root avulsion state (-15%, p = 0.12), the loss factor decreased (p < 0.046) up to 68% for the total meniscectomy state (p = 0.028) when compared to the intact state. Sinusoidal DMA testing revealed that knees with an intact meniscus had the highest loss factors, ranging from 0.10 to 0.15. Any surgical manipulation lowered the damping ability: Medial meniscectomy resulted in a reduction of 24%, while the resection of both menisci lowered tan δ by 18% compared to the intact state. This biomechanical in vitro study indicates that the shock-absorbing ability of a knee joint is lower when meniscal tissue is resected. In other words, the meniscus contributes to the shock absorption of the knee joint not only during impact loads, but also during sinusoidal loads. The findings may have an impact on the rehabilitation of young, meniscectomized patients who want to return to sports. Consequently, such patients are exposed to critical loads on the articular cartilage, especially when performing sports with recurring impact loads transmitted through the knee joint surfaces.
RESUMO
Purpose: Menisci transfer axial loads, while increasing the load-bearing tibiofemoral contact area and decreasing tibiofemoral contact pressure (CP). Numerous clinical and experimental studies agree that an increased CP is one predominant indicator for post-traumatic osteoarthritis (PTOA) of the knee joint. However, due to the immense variability in experimental test setups and wide range of treatment possibilities in meniscus surgery, it is difficult to objectively assess their impact on the CP determination, which is clearly crucial for knee joint health. Therefore, the aim of this systematic review is to investigate the influence of different meniscal injuries and their associated surgical treatments on the CP. Secondly, the influence of different test setups on CP measurements is assessed. On the basis of these results, we established the basis for recommendations for future investigations with the aim to determine CPs under different meniscal states. Methods: This review was conducted in accordance with the PRISMA guidelines. Studies were identified through a systematic literature search in Cochrane, PubMed and Web of Science databases. Literature was searched through pre-defined keywords and medical subject headings. Results: This review indicates a significant increase of up to 235% in peak CP when comparing healthy joints and intact menisci with impaired knee joints, injured or resected menisci. In addition, different test setups were indicated to have major influences on CP: The variety of test setups ranged from standard material testing machines, including customized setups via horizontal and vertical knee joint simulators, through to robotic systems. Differences in applied axial knee joint loads ranged from 0 N up to 2,700 N and resulted unsurprisingly in significantly different peak CPs of between 0.1 and 12.06 MPa. Conclusion: It was shown that untreated traumatic meniscal tears result in an increased CP. Surgical repair intervention were able to restore the CP comparable to the healthy, native condition. Test setup differences and particularly axial joint loading variability also led to major CP differences. In conclusion, when focusing on CP measurements in the knee joint, transparent and traceable in vitro testing conditions are essential to allow researchers to make a direct comparison between future biomechanical investigations.
RESUMO
An exact understanding of the interplay between the articulating tissues of the knee joint in relation to the osteoarthritis (OA)-related degeneration process is of considerable interest. Therefore, the aim of the present study was to characterize the biomechanical properties of mildly and severely degenerated human knee joints, including their menisci and tibial and femoral articular cartilage (AC) surfaces. A spatial biomechanical mapping of the articulating knee joint surfaces of 12 mildly and 12 severely degenerated human cadaveric knee joints was assessed using a multiaxial mechanical testing machine. To do so, indentation stress relaxation tests were combined with thickness and water content measurements at the lateral and medial menisci and the AC of the tibial plateau and femoral condyles to calculate the instantaneous modulus (IM), relaxation modulus, relaxation percentage, maximum applied force during the indentation, and the water content. With progressing joint degeneration, we found an increase in the lateral and the medial meniscal instantaneous moduli (p < 0.02), relaxation moduli (p < 0.01), and maximum applied forces (p < 0.01), while for the underlying tibial AC, the IM (p = 0.01) and maximum applied force (p < 0.01) decreased only at the medial compartment. Degeneration had no influence on the relaxation percentage of the soft tissues. While the water content of the menisci did not change with progressing degeneration, the severely degenerated tibial AC contained more water (p < 0.04) compared to the mildly degenerated tibial cartilage. The results of this study indicate that degeneration-related (bio-)mechanical changes seem likely to be first detectable in the menisci before the articular knee joint cartilage is affected. Should these findings be further reinforced by structural and imaging analyses, the treatment and diagnostic paradigms of OA might be modified, focusing on the early detection of meniscal degeneration and its respective treatment, with the final aim to delay osteoarthritis onset.
RESUMO
The in vitro determination of realistic loads acting in knee ligaments, articular cartilage, menisci and their attachments during daily activities require the creation of physiological muscle forces, ground reaction force and unconstrained kinematics. However, no in vitro test setup is currently available that is able to simulate such physiological loads during squatting and jump landing exercises. Therefore, a novel knee joint simulator allowing such physiological loads in combination with realistic, rapid movements is presented. To gain realistic joint positions and muscle forces serving as input parameters for the simulator, a combined in vivo motion analysis and inverse dynamics (MAID) study was undertaken with 11 volunteers performing squatting and jump landing exercises. Subsequently, an in vitro study using nine human knee joint specimens was conducted to prove the functionality of the simulator. To do so, slow squatting without muscle force simulation representing quasi-static loading conditions and slow squatting and jump landing with physiological muscle force simulation were carried out. During all tests ground reaction force, tibiofemoral contact pressure, and tibial rotation characteristics were simultaneously recorded. The simulated muscle forces obtained were in good correlation (0.48 ≤ R ≤ 0.92) with those from the in vivo MAID study. The resulting vertical ground reaction force showed a correlation of R = 0.93. On the basis of the target parameters of ground reaction force, tibiofemoral contact pressure and tibial rotation, it could be concluded that the knee joint load was loaded physiologically. Therefore, this is the first in vitro knee joint simulator allowing squatting and jump landing exercises in combination with physiological muscle forces that finally result in realistic ground reaction forces and physiological joint loading conditions.
RESUMO
One key point in the development of new bioimplant matrices for the reconstruction and replacement of cartilage defects is to provide an adequate microenvironment to ensure chondrocyte migration and de novo synthesis of cartilage-specific extracellular matrix (ECM). A recently developed decellularization and sterilization process maintains the three-dimensional (3D) collagen structure of native septal cartilage while increasing matrix porosity, which is considered to be crucial for cartilage tissue engineering. Human primary nasal septal chondrocytes were amplified in monolayer culture and 3D-cultured on processed porcine nasal septal cartilage scaffolds. The influence of chondrogenic growth factors on neosynthesis of ECM proteins was examined at the protein and gene expression levels. Seeding experiments demonstrated that processed xenogenic cartilage matrices provide excellent environmental properties for human nasal septal chondrocytes with respect to cell adhesion, migration into the matrix and neosynthesis of cartilage-specific ECM proteins, such as collagen type II and aggrecan. Matrix biomechanical stability indicated that the constructs retrieve full stability and function during 3D culture for up to 42 days, proportional to collagen type II and GAG production. Thus, processed xenogenic cartilage offers a suitable environment for human nasal chondrocytes and has promising potential for cartilage tissue engineering in the head and neck region.
Assuntos
Cartilagem/química , Diferenciação Celular , Condrócitos/metabolismo , Proteínas da Matriz Extracelular/biossíntese , Septo Nasal/metabolismo , Engenharia Tecidual/métodos , Adolescente , Adulto , Idoso , Animais , Técnicas de Cultura de Células , Células Cultivadas , Condrócitos/citologia , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Septo Nasal/citologia , SuínosRESUMO
BACKGROUND: It was investigated whether the strain of the anterior cruciate ligament and tibial kinematics are affected by increasing posterior tibial slope. METHODS: 9 human cadaveric knee joints were passively moved between full extension and 120° flexion in a motion and loading simulator under various loading conditions and at 0°, 5°, 10° and 15° posterior tibial slope angles. The anterior cruciate ligament strain and the tibial rotation angle were registered. To assess the influence of posterior tibial slope on the anterior cruciate ligament strain at a fixed flexion angle the anterior cruciate ligament strain was recorded at three different flexion angles of 0°, 30° and 90° while continuously increasing the osteotomy angle from 5° to 15°. FINDINGS: The anterior cruciate ligament strain was either not affected by the posterior tibial slope angle or, in some load cases, was decreased for increasing posterior tibial slope (P<0.05). There was a significant decrease of tibial rotation when the posterior tibial slope was increased to 15° for many of the load cases tested (P<0.05). The mean maximum decrease was from 17.4° (SD 5.7°) to 11.2° (SD 4.7°) observed for flexion-extension motion under 30N axial load in combination with an internal rotation moment. INTERPRETATION: The hypothesis that increasing posterior tibial slope results in higher anterior cruciate ligament strain was not confirmed. However, knee kinematics were affected in terms of a reduced tibial rotation. From a biomechanical point of view the data do not support the efficacy of sagittal osteotomies as performed to stabilize anterior cruciate ligament deficient knees.
Assuntos
Ligamento Cruzado Anterior/fisiologia , Articulação do Joelho/fisiologia , Amplitude de Movimento Articular/fisiologia , Tíbia/fisiologia , Fenômenos Biomecânicos , Cadáver , Humanos , Técnicas In Vitro , Masculino , Pessoa de Meia-Idade , Movimento/fisiologia , Osteotomia , Rotação , Estresse MecânicoRESUMO
Damage of cartilage structures in the head and neck region as well as in orthopedic sites are frequently caused by trauma, tumor resection, or congenital defects. Despite a high demand in many clinical fields, until today, no adequate cartilage replacement matrix is available for these fields of application. Materials that are clinically applied for joint cartilage repair still need optimization due to difficult intraoperative handling and risk of early mechanical damage. We have developed and applied a novel chemical process to completely decellularize and sterilize human and porcine cartilage tissues (meniscus cartilage and nasal septum) to generate a new type of bioimplant matrix. To characterize this matrix and to determine the effect of the decellularization process, the content of denatured collagen (w(D)) and the content of glycosaminoglycans (GAGs) (w(G)) were determined. Possible cytotoxic effects and cellular compatibility of the matrix in vitro have been examined by seeding processed cartilage biomatrices with human primary chondrocytes as well as murine fibroblasts (L929). Vitality and state of metabolism of cells were measured using MTS assays. Both cell types adhered to scaffold surfaces and proliferated. No areas of growth inhibition or cytotoxic effects were detected. New synthesis of cartilage-specific extracellular matrix was observed. By histological staining, electron microscopy, and µCT analysis, an increase of matrix porosity, complete cell elimination, and high GAG removal were demonstrated. Being from natural-origin, processed xenogenic and allogeneic cartilage biomatrices are highly versatile with regard to shape, size, and biomechanics, making them promising candidates for various biomedical applications.
Assuntos
Materiais Biocompatíveis/farmacologia , Cartilagem/fisiologia , Matriz Extracelular/metabolismo , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Acetilglucosamina/metabolismo , Adolescente , Adulto , Idoso , Animais , Fenômenos Biomecânicos/efeitos dos fármacos , Adesão Celular/efeitos dos fármacos , Morte Celular/efeitos dos fármacos , Forma Celular/efeitos dos fármacos , Condrócitos/citologia , Condrócitos/efeitos dos fármacos , Condrócitos/ultraestrutura , Colágeno/química , Colágeno/ultraestrutura , Módulo de Elasticidade/efeitos dos fármacos , Matriz Extracelular/efeitos dos fármacos , Glicosaminoglicanos/metabolismo , Humanos , Meniscos Tibiais/citologia , Camundongos , Pessoa de Meia-Idade , Porosidade , Desnaturação Proteica/efeitos dos fármacos , Sus scrofa , Adulto JovemRESUMO
BACKGROUND: Meniscal tears often occur in association with anterior cruciate ligament (ACL) lesions or in chronically lax knees. It is also known that meniscal repairs are less likely to heal in ACL-deficient knees. PURPOSE: To test the effect of different knee joint motion and loading conditions on the gapping behavior of longitudinal posterior horn meniscal tears in stable and ACL-deficient knee joints. STUDY DESIGN: Controlled laboratory study. METHODS: Longitudinal tears of 3 cm were set in the posterior horn of the medial menisci in 10 human cadaveric joints. The medial plateau of the knees was replaced by a transparent replica, and an arthroscope was placed underneath to observe the gapping phenomenon of the meniscal tears. The maximum gap width occurring during flexion-extension under various motion and loading situations was registered in intact and ACL-deficient joints before and after meniscal repair with FasT-Fix suture anchors. RESULTS: Longitudinal meniscal tears gapped significantly wider after ACL transection under 30-N axial joint load (P < .05). Increasing the axial load to 200 N or applying external moments to the knee did not lead to further alterations in the gap size. Gapping was significantly reduced after meniscal repair (P < .01). However, after meniscal repair, gapping under 30-N and 200-N axial joint load was still increased significantly after ACL transection compared with the ACL-intact state (P < .05). CONCLUSION: Anterior knee laxity increases gapping across both unrepaired and repaired vertical peripheral medial meniscal posterior horn tears. CLINICAL RELEVANCE: Repairing such meniscal tears without reconstructing the ACL may affect meniscus healing rates or increase the risk of retears. Moderate rehabilitation regimens can be recommended, allowing at least for partial weightbearing and knee motion from extension to 120° of flexion in a stable knee. However, caution should be recommended if meniscal repair is performed in a knee joint with persistent anterior laxity due to ACL deficiency.