IL-38 regulates intestinal stem cell homeostasis by inducing WNT signaling and beneficial IL-1ß secretion.

The IL-1 Family member IL-38 has been characterized primarily as an antiinflammatory cytokine in human and mouse models of systemic diseases. Here, we examined the role of IL-38 in the murine small intestine (SI). Immunostaining of SI revealed that IL-38 expression partially confines to intestinal stem cells. Cultures of intestinal organoids reveal IL-38 functions as a growth factor by increasing organoid size via inducing WNT3a. In contrast, organoids from IL-38-deficient mice develop more slowly. This reduction in size is likely due to the downregulation of intestinal stemness markers (i.e., Fzd5, Ephb2, and Olfm4) expression compared with wild-type organoids. The IL-38 binding to IL-1R6 and IL-1R9 is still a matter of debate. Therefore, to analyze the molecular mechanisms of IL-38 signaling, we also examined organoids from IL-1R9-deficient mice. Unexpectedly, these organoids, although significantly smaller than wild type, respond to IL-38, suggesting that IL-1R9 is not involved in IL-38 signaling in the stem cell crypt. Nevertheless, silencing of IL-1R6 disabled the organoid response to the growth property of IL-38, thus suggesting IL-1R6 as the main receptor used by IL-38 in the crypt compartment. In organoids from wild-type mice, IL-38 stimulation induced low concentrations of IL-1ß which contribute to organoid growth. However, high concentrations of IL-1ß have detrimental effects on the cultures that were prevented by treatment with recombinant IL-38. Overall, our data demonstrate an important regulatory function of IL-38 as a growth factor, and as an antiinflammatory molecule in the SI, maintaining homeostasis.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics.

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Cobalt Oxide-Based Electrocatalysts with Bifunctionality for High-Performing Rechargeable Zinc-Air Batteries.

In recent years, the rapid growth in renewable energy applications has created a significant demand for efficient energy storage solutions on a large scale. Among the various options, rechargeable zinc-air batteries (ZABs) have emerged as an appealing choice in green energy storage technology due to their higher energy density, sustainability, and cost-effectiveness. Regarding this fact, a spotlight is shaded on air electrode for constructing high-performance ZABs. Cobalt oxide-based electrocatalysts on the air electrode have gained significant attention due to their extraordinary features. Particularly, exploration and integration of bifunctional behavior for energy storage has remarkably promoted both ORR and OER to facilitate the overall performance of the battery. The plot of this review is forwarded towards in-depth analysis of the latest advancements in electrocatalysts that are based on cobalt oxide and possess bifunctional properties along with an introduction of the fundamental aspects of ZABs, Additionally, the topic entails an examination of the morphological variations and mechanistic details mentioning about the synthesis processes. Finally, a direction is provided for future research endeavors through addressing the challenges and prospects in the advancement of next-generation bifunctional electrocatalysts to empower high-performing ZABs with bifunctional cobalt oxide.

Micro and Nanoporous Membrane Platforms for Carbon Neutrality: Membrane Gas Separation Prospects.

Recently, carbon neutrality has been promoted as a potentially practical solution to global CO2 emissions and increasing energy-consumption challenges. Many attempts have been made to remove CO2 from the environment to address climate change and rising sea levels owing to anthropogenic CO2 emissions. Herein, membrane technology is proposed as a suitable solution for carbon neutrality. This review aims to comprehensively evaluate the currently available scientific research on membranes for carbon capture, focusing on innovative microporous material membranes used for CO2 separation and considering their material, chemical, and physical characteristics and permeability factors. Membranes from such materials comprise metal-organic frameworks, zeolites, silica, porous organic frameworks, and microporous polymers. The critical obstacles related to membrane design, growth, and CO2 capture and usage processes are summarized to establish novel membranes and strategies and accelerate their scaleup.

Presentation and outcomes of paediatric craniopharyngioma in the west of Scotland: a 25 year experience.

PURPOSE: Craniopharyngiomas can be aggressive leading to significant complications and morbidity. It is not clear whether there are any predictive factors for incidence or outcomes. Our aim was therefore to record the incidence, presentation, characteristics and progression of paediatric craniopharyngiomas in the West of Scotland. METHOD: Retrospective case note review for children diagnosed with paediatric craniopharyngiomas at the Royal Hospital for Children Glasgow, from 1995 to 2021 was conducted. All analyses were conducted using GraphPad Prism 9.4.0. RESULTS: Of 21 patients diagnosed with craniopharyngiomas, the most common presenting symptoms were headaches (17/21, 81%); visual impairment (13/21, 62%); vomiting (9/21, 43%) and growth failure (7/21, 33%). Seventeen (81%) patients underwent hydrocephalus and/or resection surgery within 3 months of diagnosis, usually within the first 2 weeks (13/21, 62%). Subtotal resection surgeries were performed in 71% of patients, and median time between subsequent resection surgeries for tumour recurrence was 4 years (0,11). BMI SDS increased at 5 year follow-up (p = 0.021) with 43% being obese (BMI > + 2SD). More patients acquired hypopituitarism post-operatively (14/16, 88%) compared to pre-operatively (4/15, 27%). A greater incidence of craniopharyngiomas were reported in more affluent areas (10/21, 48%) (SIMD score 8-10) compared to more deprived areas (6/10, 29%) (SIMD score 1-3). Five patients (24%) died with a median time between diagnosis and death of 9 years (6,13). CONCLUSION: Over 25 years the management of craniopharyngioma has changed substantially. Co-morbidities such as obesity are difficult to manage post-operatively and mortality risk can be up to 25% according to our cohort.

Diverse Coordination Modes and Bidirectional Noninnocence of Pyridyl-ß-diketonate on Ruthenium Platforms as a Function of Coligands.

The article demonstrated diverse binding modes of deprotonated 1,3-di(2-pyridinyl)-1,3-propanedione (HL) (κ2-[O,O]-, κ2-[N,O]-, and µ-bis-κ2-[N,O]-) on selective ruthenium platforms: Ru(acac)2 (dimeric [1]ClO4), Ru(bpy)2 (monomeric [2]ClO4), Ru(pap)2 (isomeric monomeric [3]ClO4/[4]ClO4, dimeric [5](ClO4)3), and Ru(PPh3)2(CO) (monomeric 6, isomeric dimeric [7]ClO4/[8]ClO4) (acac = acetylacetonate, bpy = 2,2'-bipyridine, pap = 2-phenylazopyridine). Structural authentication of the complexes revealed (i) diverse binding mode of L- including its unprecedented bridging mode in [8]ClO4, (ii) varying degrees of nonplanarity of L-, and (iii) development of 1D polymeric chains or dimeric/tetrameric forms via intermolecular π-π interactions. The preferential binding feature of L- in the complexes could also be corroborated by their calculated relative energies. The analysis of the multiredox steps of the complexes suggested severe mixing of metal-ligand frontier orbitals, which in effect pinpointed the involvement of L- in both the oxidative and reductive processes along the redox chain, suggesting its bidirectional noninnocence under the present coordination situations. Though α-diketone or ß-diketiminate was reported to activate O2 on the selective Ru(acac)2 platform, the inability of analogous ß-diketonate-derived [1]ClO4 could be attributed to its calculated greater HOMO-LUMO energy gap, which disfavored electron exchange at the metal(RuIII)-ligand(L-) interface to introduce the required unpaired spin at the ligand backbone toward the 3O2 activation event.

Innate and Adaptive Immunity in Noninfectious Granulomatous Lung Disease.

Sarcoidosis and chronic beryllium disease are noninfectious lung diseases that are characterized by the presence of noncaseating granulomatous inflammation. Chronic beryllium disease is caused by occupational exposure to beryllium containing particles, whereas the etiology of sarcoidosis is not known. Genetic susceptibility for both diseases is associated with particular MHC class II alleles, and CD4+ T cells are implicated in their pathogenesis. The innate immune system plays a critical role in the initiation of pathogenic CD4+ T cell responses as well as the transition to active lung disease and disease progression. In this review, we highlight recent insights into Ag recognition in chronic beryllium disease and sarcoidosis. In addition, we discuss the current understanding of the dynamic interactions between the innate and adaptive immune systems and their impact on disease pathogenesis.

A High-Energy Asymmetric Supercapacitor Based on Tomato-Leaf-Derived Hierarchical Porous Activated Carbon and Electrochemically Deposited Polyaniline Electrodes for Battery-Free Heart-Pulse-Rate Monitoring.

A simple and scalable method to fabricate a novel high-energy asymmetric supercapacitor using tomato-leaf-derived hierarchical porous activated carbon (TAC) and electrochemically deposited polyaniline (PANI) for a battery-free heart-pulse-rate monitor is reported. In this study, TAC is prepared by simple pyrolysis, exhibiting nanosheet-type morphology and a high specific surface area of ≈1440 m2 g-1 , and PANI is electrochemically deposited onto carbon cloth. The TAC- and PANI- based asymmetric supercapacitor demonstrates an electrochemical performance superior to that of symmetric supercapacitors, delivering a high specific capacitance of 248 mF cm-2 at a current density of 1.0 mA cm-2 . The developed asymmetric supercapacitor shows a high energy density of 270 µWh cm-2 at a power density of 1400 µW cm-2 , as well as an excellent cyclic stability of ≈95% capacitance retention after 10 000 charging-discharging cycles while maintaining ≈98% Coulombic efficiency. Impressively, the series-connected asymmetric supercapacitors can operate a battery-free heart-pulse-rate monitor extremely efficiently upon solar-panel charging under regular laboratory illumination.

Toll-like receptor and inflammasome signals converge to amplify the innate bactericidal capacity of T helper 1 cells.

T cell effector functions can be elicited by noncognate stimuli, but the mechanism and contribution of this pathway to the resolution of intracellular macrophage infections have not been defined. Here, we show that CD4(+) T helper 1 (Th1) cells could be rapidly stimulated by microbe-associated molecular patterns during active infection with Salmonella or Chlamydia. Further, maximal stimulation of Th1 cells by lipopolysaccharide (LPS) did not require T-cell-intrinsic expression of toll-like receptor 4 (TLR4), interleukin-1 receptor (IL-1R), or interferon-γ receptor (IFN-γR) but instead required IL-18R, IL-33R, and adaptor protein MyD88. Innate stimulation of Th1 cells also required host expression of TLR4 and inflammasome components that together increased serum concentrations of IL-18. Finally, the elimination of noncognate Th1 cell stimulation hindered the resolution of primary Salmonella infection. Thus, the in vivo bactericidal capacity of Th1 cells is regulated by the response to noncognate stimuli elicited by multiple innate immune receptors.

Characterization and Applications of Red Mud, an Aluminum Industry Waste Material, in the Construction and Building Industries, as well as Catalysis.

The disposal of red mud (RM), a waste material generated by the aluminum industry, remains a global environmental concern because of its high alkalinity and smaller particle size, which have the potential to pollute air, soil, and water. Recently, efforts have been made to develop a strategy for reusing industrial byproducts, such as RM, and turning waste into value-added products. The use of RM as (i) a supplementary cementitious material for construction and building materials, such as cement, concrete, bricks, ceramics, and geopolymers, and (ii) a catalyst is discussed in this review. Furthermore, the physical, chemical, mineralogical, structural, and thermal properties of RM, as well as its environmental impact, are also discussed in this review. It is possible to conclude that using RM in catalysis, cement, and construction industries is the most efficient way to recycle this byproduct on a large scale. However, the low cementitious properties of RM can be attributed to a reduction in the fresh and mechanical properties of composites incorporating RM. On the other hand, RM can be used as an efficient active catalyst to synthesize organic molecules and reduce air pollution, which not only makes use of solid waste but also lowers the price of the catalyst. The review provides basic information on the characterization of RM and its suitability in various applications, paving the way for more advanced research on the sustainable disposal of RM waste. Future research perspectives on the utilization of RM are also addressed.

Cu-Metal Organic Framework Derived Multilevel Hierarchy (Cu/CuxO@NC) as a Bifunctional Electrode for High-Performance Supercapacitors and Oxygen Evolution Reaction.

The development of a MOFs-derived multilevel hierarchy in a single step still remains a challenging task. Herein, we have synthesized novel Cu-MOF via a slow diffusion method at ambient temperature and further utilized it as a precursor source for MOF-derived multilevel hierarchy (Cu/CuxO@NC, x = 1 and 2). This studies suggest that the organic ligands served as a source of an N-doped carbon matrix encapsulated with metal oxide nanoparticles which were confirmed by various characterization techniques; further BET analysis reveals a surface area of 178.46 m2/g. The synthesized multilevel hierarchy was utilized as an electro-active material in a supercapacitor that achieved a specific capacitance of 546.6 F g-1 at a current density of 1 A g-1 with a higher cyclic retention of 91.81% after 10 000 GCD cycles. Furthermore, the ASC device was fabricated using Cu/CuxO@NC as the positive electrode and carbon black as the negative electrode and utilized to enlighten the commercially available LED bulb. The fabricated ASC device was further employed for a two-electrode study which achieved a specific capacitance of 68 F g-1 along with a comparable energy density of 13.6 Wh kg-1. Furthermore, the electrode material was also explored for the oxygen evolution reaction (OER) in an alkaline medium with a low overpotential of 170 mV along with a Tafel slope of 95 mV dec-1 having long-term stability. The MOF-derived material has high durability, chemical stability, and efficient electrochemical performance. This work provides some new thoughts for the design and preparation of a multilevel hierarchy (Cu/CuxO@NC) via a single precursor source in a single step and explored multifunctional applications in energy storage and an energy conversion system.

Phosphorization Engineering on a MOF-Derived Metal Phosphide Heterostructure (Cu/Cu3P@NC) as an Electrode for Enhanced Supercapacitor Performance.

A highly conductive and rationally constructed metal-organic framework (MOF)-derived metal phosphide with a carbonaceous nanostructure is a meticulous architecture toward the development of electrode materials for energy storage devices. Herein, we report a facile strategy to design and construct a new three-dimensional (3D) Cu-MOF via a solvent diffusion method at ambient temperature, which was authenticated by a single-crystal X-ray diffraction study, revealing a novel topology of (2,4,7)-connected three-nodal net named smm4. Nevertheless, the poor conductivity of pristine MOFs is a major bottleneck hindering their capacitance. To overcome this, we demonstrated an MOF-derived Cu3P/Cu@NC heterostructure via low-temperature phosphorization of Cu-MOF. The electronic and ionic diffusion kinetics in Cu3P/Cu@NC were improved due to the synergistic effects of the heterostructure. The as-prepared Cu3P/Cu@NC heterostructure electrode delivers a specific capacity of 540 C g-1 at 1 A g-1 with outstanding rate performance (190 C g-1 at 20 A g-1) and cycle stability (91% capacity retention after 10,000 cycles). Moreover, the assembled asymmetric solid-state supercapacitor (ASC) achieved a high energy density/power density of 45.5 Wh kg-1/7.98 kW kg-1 with a wide operating voltage (1.6 V). Long-term stable capacity retention (87.2%) was accomplished after 5000 cycles. These robust electrochemical performances suggest that the Cu3P/Cu@NC heterostructure is a suitable electrode material for supercapacitor applications.

Effect of Electrolytic Cations on a 3D Cd-MOF for Supercapacitive Electrodes.

A cadmium-based metal-organic framework (Cd-MOF) is synthesized in a facile manner at ambient temperature by an easy slow diffusion process. The three-dimensional (3D) structure of Cd-MOF is authenticated by single-crystal X-ray diffraction studies and exhibits a cuboid-shaped morphology with an average edge length of ∼1.13 µm. The prepared Cd-MOF was found to be electroactive in nature, which resulted in a specific capacitance of 647 F g-1 at 4 A g-1 by maintaining a retention of ∼78% over 10,000 successive cycles in the absence of any binder. Further, to distinguish the efficiency of Cd-MOF electrodes, different electrolytes (NaOH, KOH, and LiOH) were explored, wherein NaOH revealed a higher capacitive response due to its combined effect of ionic and hydrated ionic radii. To investigate the practical applicability, an asymmetric supercapacitor (ASC) device is fabricated by employing Cd-MOF as the positive electrode and activated carbon (AC) as the negative electrode, enabling it to light a commercial light-emitting diode (LED) bulb (∼1.8 V). The as-fabricated ASC device delivers comparable energy density and power density.

Type 1 interferon-dependent repression of NLRC4 and iPLA2 licenses down-regulation of Salmonella flagellin inside macrophages.

Inflammasomes have been implicated in the detection and clearance of a variety of bacterial pathogens, but little is known about whether this innate sensing mechanism has any regulatory effect on the expression of stimulatory ligands by the pathogen. During infection with Salmonella and many other pathogens, flagellin is a major activator of NLRC4 inflammasome-mediated macrophage pyroptosis and pathogen eradication. Salmonella switches to a flagellin-low phenotype as infection progresses to avoid this mechanism of clearance by the host. However, the host cues that Salmonella perceives to undergo this switch remain unclear. Here, we report an unexpected role of the NLRC4 inflammasome in promoting expression of its microbial ligand, flagellin, and identify a role for type 1 IFN signaling in switching of Salmonella to a flagellin-low phenotype. Early in infection, activation of NLRC4 by flagellin initiates pyroptosis and concomitant release of lysophospholipids which in turn enhance expression of flagellin by Salmonella thereby amplifying its ability to elicit cell death. TRIF-dependent production of type 1 IFN, however, later represses NLRC4 and the lysophospholipid biosynthetic enzyme iPLA2, causing a decline in intracellular lysophospholipids that results in down-regulation of flagellin expression by Salmonella These findings reveal a previously unrecognized immune-modulating regulatory cross-talk between endosomal TLR signaling and cytosolic NLR activation with significant implications for the establishment of infection with Salmonella.

Recent Advancements in Electrochemical Deposition of Metal-Based Electrode Materials for Electrochemical Supercapacitors.

The demand for energy storage devices with high energy and power densities has increased tremendously in this rapidly growing world. Conventional capacitors, fuel cells, and lithium-ion batteries have been used as energy storage devices for the long term. However, supercapacitors are one of the most promising energy storage devices because of their high specific capacitance, high power density, and longer cycle life. Recent research has focused on synthesizing transition-metal oxides/hydroxides, carbon materials, and conducting polymers as supercapacitor electrode materials. The performance of supercapacitors can be improved by altering electrolytes, electrode materials, current collectors, experimental temperatures, and film thickness. Thousands of papers on supercapacitors have already been published, reflecting the significance and elucidating how much demanding such energy storage devices for this fast-growing generation. This review aims to illustrate the electrode materials loaded on various conductive substrates by electrochemical deposition employed for supercapacitors to provide broad knowledge on synthetic pathways, which will pave the way for future research. We also discussed the basic parameters involved in supercapacitor studies and the advantages of the electrochemical deposition techniques through literature analysis. Finally, future trends and directions on exploring metals/metal composites toward designing and constructing viable, high-class, and even newly featured flexible energy storage materials, electrodes, and systems are presented.

Recent Development of Morphology-Controlled Hybrid Nanomaterials for Triboelectric Nanogenerator: A Review.

Being cognizant of modern electronic devices, the scientists are continuing to investigate renewable green-energy resources for a decade. Amid different energy harvesting systems, the triboelectric nanogenerators (TENGs) have been found to be the most promising mechanical harvesting technology and have drawn attention to generate electrical energy. Thanks to its instant output power, choice to opt for wide-ranging materials, low maintenance cost, easy fabrication process and environmentally friendly nature. Due to numerous working modes of TENGs, it is dedicated to desired application at ambient conditions. In this review, an advance correlation of TENGs have been explained based on the variety of nanostructures, including 0D, 1D, 2D, 3D, metal organic frameworks (MOFs), coordination polymers (CPs), covalent organic frameworks (COFs), and perovskite materials. Moreover, an overview of previous and current perspectives of various nanomaterials, synthesis, fabrication and their applications in potential fields have been discussed in detail.

HIV Infection Is Associated with Loss of Anti-Inflammatory Alveolar Macrophages.

HIV type 1 is associated with pulmonary dysfunction that is exacerbated by cigarette smoke. Alveolar macrophages (AM) are the most prominent immune cell in the alveolar space. These cells play an important role in clearing inhaled pathogens and regulating the inflammatory environment; however, how HIV infection impacts AM phenotype and function is not well understood, in part because of their autofluorescence and the absence of well-defined surface markers. The main aim of this study was to evaluate the impact of HIV infection on human AM and to compare the effect of smoking on their phenotype and function. Time-of-flight mass cytometry and RNA sequencing were used to characterize macrophages from human bronchoalveolar lavage of HIV-infected and -uninfected smokers and nonsmokers. We found that the frequency of CD163+ anti-inflammatory AM was decreased, whereas CD163-CCR7+ proinflammatory AM were increased in HIV infection. HIV-mediated proinflammatory polarization was associated with increased levels of inflammatory cytokines and macrophage activation. Conversely, smoking heightened the inflammatory response evident by change in the expression of CXCR4 and TLR4. Altogether, these findings suggest that HIV infection, along with cigarette smoke, favors a proinflammatory macrophage phenotype associated with enhanced expression of inflammatory molecules. Further, this study highlights time-of-flight mass cytometry as a reliable method for immunophenotyping the highly autofluorescent cells present in the bronchoalveolar lavage of cigarette smokers.

Double chambered left ventricle-institutional experience of two cases.

BACKGROUND: Double Chambered Left Ventricle is a very rare congenital cardiac condition with limited cases reported in literature, etiology of which is obscure and presentation can be varied. AIM OF THE STUDY: To share our experience of two diverse cases of Double Chambered Left Ventricle at our institute. RESULTS: Two diverse cases of Double Chambered Left Ventricle were appropriately diagnosed and successfully managed. One of which one was congenital and the other was acquired METHODS: Both the patients had an uneventful peri-operative period. CONCLUSIONS: Double Chambered Left Ventricle is a condition which remains an enigma. Diagnosis requires a high degree of radiological suspicion for prompt diagnosis and good surgical outcomes.

The use of growth hormone therapy in adults with Prader-Willi syndrome: A systematic review.

OBJECTIVE: Despite clear benefits in the management of children with Prader-Willi syndrome (PWS), the role of growth hormone (GH) in adults is unclear. The aim of this study was to conduct a systematic review to evaluate the effects of GH on body composition, bone health and cardiovascular health in adults with PWS. DESIGN: A systematic computerized literature search of the PubMed database was conducted by two independent reviewers. Inclusion criteria were individuals over the age of 16 years with a genetic diagnosis of PWS who had received GH therapy, together with assessment of body composition, bone health or cardiovascular health. RESULTS: Twenty full-text papers met the inclusion criteria, encompassing 364 unique patients. No differences in body mass index (BMI) were noted, although 2 studies reported increased BMI after GH cessation. Data demonstrated statistically significant increases in lean body mass and reductions in percentage fat mass. Studies reported inconsistent effects of GH on cholesterol and echocardiography parameters. No studies reported differences in bone mineral density, although one reported improved bone geometry. Minor adverse events including pretibial oedema, headache and transient impaired glucose tolerance were reported in 7 studies. CONCLUSIONS: These data suggest that GH is safe and well tolerated in adults with PWS, with evidence of improvement in body composition. Further longitudinal studies are still required to investigate the effects of GH on bone and cardiovascular health. Where GH is used in adults with PWS, this should be managed by a specialist multidisciplinary team with regular monitoring initiated.

Progress and Perspectives on Covalent-Organic Frameworks (COFs) and Composites for Various Energy Applications.

Covalent-organic frameworks (COFs), being a new member of the crystalline porous materials family, have emerged as important materials for energy storage/conversion/generation devices. They possess high surface areas, ordered micro/mesopores, designable structures and an ability to precisely control electro-active groups in their pores, which broaden their application window. Thanks to their low weight density, long range crystallinity, reticular nature and tunable synthesis approach towards two and three dimensional (2D and 3D) networks, they have been found suitable for a range of challenging electrochemical applications. Our review focuses on the progress made on the design, synthesis and structure of COFs and their composites for various energy applications, such as metal-ion batteries, supercapacitors, water-splitting and solar cells. Additionally, attempts have been made to correlate the structural and mechanistic characteristics of COFs with their applications.