RESUMO
Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs), as a promising technology for water decontamination, are constrained by low reaction kinetics due to limited reaction selectivity and mass transfer. Herein, we designed a nanoconfined FeCo2O4-embedded ceramic membrane (FeCo2O4-CM) under flow-through pattern for PMS activation. Confining PMS and FeCo2O4 within nanochannels (3.0-4.7 nm) enhanced adsorption interactions (-7.84 eV vs -2.20 eV), thus boosting mass transfer. Nanoconfinement effect regulated electron transfer pathways from PMS to FeCo2O4-CM by modulating the active site transformation to ≡Co(III) in nanoconfined FeCo2O4-CM, enabling selectively generating 1O2. The primary role of 1O2 in the nanoconfined system was confirmed by kinetic solvent isotope experiments and indicative anthracene endoperoxide (DPAO2). The system enabled 100% removal of atrazine (ATZ) within a hydraulic retention time of 2.124 ms, demonstrating a rate constant over 5 orders of magnitude higher than the nonconfined system (3.50 × 103 s-1 vs 0.42 min-1). It also exhibited strong resilience to pH variations (3.3-9.0) and coexisting substances, demonstrating excellent stability indicated by consistent 100% ATZ removal for 14 days. This study sheds light on regulating electron transfer pathways to selectively generate 1O2 through the nanoconfinement effect, boosting the practical application of PMS-based AOPs in environmental remediation and potentially applying them to various other AOPs.
RESUMO
Pt/CeO2 catalysts exhibit excellent catalytic performance for the methanol dehydrogenation (MD) reaction. In this work, MD reactions on three systems of Pt1/CeO2(110)), Pt7/CeO2(110), and Pt1/Ce1-xO2(110) are investigated via density functional theory (DFT) calculations. The CH3OH adsorption, electronic structure of the catalyst, and mechanism of methanol decomposition (MD) are systematically calculated. The results reveal that the d-band center of the Pt atom moves away from the Fermi level in the order of Pt1/CeO2(110) < Pt7/CeO2(110) < Pt1/Ce1-xO2(110), and the order of the activity of the MD reaction is Pt1/CeO2(110) < Pt7/CeO2(110) < Pt1/Ce1-xO2(110). The results of the microkinetic dynamics simulation verify that only Pt1/Ce1-xO2(110) is conducive to the decomposition of methanol at low temperatures (373 K), and the products CO and H2 are easily dissociated from the catalyst surface. This work uncovers that both the small size and the Ce vacancy substituted sites of Pt favor the performance of the Pt/CeO2 catalyst, and provides theoretical guidance for the construction and design of efficient metal-support catalysts for the MD reaction.
RESUMO
Dielectric barrier discharge plasma (DBDP) is an emerging and promising advanced oxidation process (AOP) for wastewater treatment. After investigating the effect of input voltage, O3 (generated by dielectric barrier discharge), and peroxydisulfate (PDS) dosage, the DBDPO3/PDS system was established. With the assistance of PDS, the atrazine (ATZ) removal efficiency increased from 69.67% to 82.46% within 25 min. Synergistic effect calculation suggests that there were markedly synergies between DBDP, O3, and PDS. Under the effect of SO4-â¢, the total organic carbon (TOC) removal and dechlorination efficiency were significantly improved. In addition, the DBDPO3/PDS system maintained the ATZ removal efficiency at a high level over a wide range of initial pH values. According to quenching experiments and electron paramagnetic resonance (EPR) detection, the dominant radical for ATZ degradation in the DBDPO3/PDS system was HOâ¢. A possible degradation pathway of ATZ was proposed based on density functional theory (DFT) analysis, quadrupole-time of flight-liquid chromatography/mass spectrometry (Q-TOF-LC/MS) results, and related literature. The acute toxicity to aquatic minnows and the developmental toxicity of intermediate products prediction confirmed that the DBDPO3/PDS system could effectively reduce ATZ toxicity. The electrical energy per order (EEO) was 7.10 kWh m-3 order-1 illustrating that the DBDPO3/PDS was a more energy-economic system than other energy-intensive processing technologies.
Assuntos
Atrazina , Poluentes Químicos da Água , Purificação da Água , Atrazina/análise , Atrazina/toxicidade , Cromatografia Líquida , Oxirredução , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Solid-State LiDAR (SSL) takes an increasing share of the LiDAR market. Compared with traditional spinning LiDAR, SSLs are more compact, energy-efficient and cost-effective. Generally, the current study of SSL mapping is limited to adapting existing SLAM algorithms to an SSL sensor. However, compared with spinning LiDARs, SSLs are different in terms of their irregular scan patterns and limited FOV. Directly applying existing SLAM approaches on them often increase the instability of a mapping process. This study proposes a systematic design, which consists of a dual-LiDAR mapping system and a three DOF interpolated six DOF odometry. For dual-LiDAR mapping, this work uses a 2D LiDAR to enhance a 3D SSL performance on a ground vehicle platform. The proposed system takes a 2D LiDAR to preprocess the scanning field into a number of feature sections according to the curvatures on the 2D fraction. Subsequently, this section information is passed to 3D SSL for direction feature selection. Additionally, this work proposes an odometry interpolation method which uses both LiDARs to generate two separated odometries. The proposed odometry interpolation method selectively determines the appropriate odometry information to update the system state under challenging conditions. Experiments are conducted in different scenarios. The results proves that the proposed approach is able to utilise 12 times more corner features from the environment than the comparied method, thus results in a demonstrable improvement in its absolute position error.
RESUMO
The mechanical behaviour of adherent cells when subjected to the local indentation can be modelled via various approaches. Specifically, the tensegrity structure has been widely used in describing the organization of discrete intracellular cytoskeletal components, including microtubules (MTs) and microfilaments. The establishment of a tensegrity model for adherent cells has generally been done empirically, without a mathematically demonstrated methodology. In this study, a rotationally symmetric prism-shaped tensegrity structure is introduced, and it forms the basis of the proposed multi-level tensegrity model. The modelling approach utilizes the force density method to mathematically assure self-equilibrium. The proposed multi-level tensegrity model was developed by densely distributing the fundamental tensegrity structure in the intracellular space. In order to characterize the mechanical behaviour of the adherent cell during the atomic force microscopy (AFM) indentation with large deformation, an integrated model coupling the multi-level tensegrity model with a hyperelastic model was also established and applied. The coefficient of determination between the computational force-distance (F-D) curve and the experimental F-D curve was found to be at 0.977 in the integrated model on average. In the simulation range, along with the increase in the overall deformation, the local stiffness contributed by the cytoskeletal components decreased from 75% to 45%, while the contribution from the hyperelastic components increased correspondingly.
Assuntos
Análise de Elementos Finitos , Microscopia de Força Atômica/métodos , Citoesqueleto de Actina/química , Citoesqueleto/química , Microtúbulos/químicaRESUMO
Chemoselective hydrogenation of carbonyl in unsaturated aldehydes is a significant process in the chemical industry, in which the development of aqueous-phase reaction systems as a substitution to organic ones is challenging. Herein, we report Ir atomic cluster catalysts anchored onto WO3-x nanorods via a reduction treatment at various temperatures (denoted as Ir/WOx-T, T = 200, 300, 400, and 500 °C), which accelerates the chemoselective hydrogenation of carbonyl groups in aqueous solutions. The optimal catalyst Ir/WOx-300 exhibits exceptional activity (TOF value: 1313.7 min-1) and chemoselectivity toward cinnamaldehyde (CAL) hydrogenation to cinnamyl alcohol (COL) (yield: â¼98.0%) in water medium, which is, to the best of our knowledge, the highest level compared with previously reported heterogeneous catalysts in liquid-phase reaction. Ac-HAADF-STEM, XAFS, and XPS verify the formation of interface structure (Irδ+-Ov-W5+ (0 ≤ δ ≤ 4); Ov denotes oxygen vacancy) induced by metal-support interaction and the largest concentration of interfacial Ir (Irδ+) in Ir/WOx-300. In situ studies (Raman, FT-IR), isotopic labeling measurements combined with DFT calculations substantiate that the hydrogenation of the C=O group consists of two pathways: water-mediated hydrogenation (predominant) and direct hydrogenation via H2 dissociation (secondary). In the former case, W5+-Ov site accelerates the activation adsorption of H2O, while Ir0 site facilitates the H-H bond cleavage of H2 and Irδ+ promotes the CAL adsorption. H2O molecule, as the source of hydrogen species, participates directly in the hydrogenation of the carbonyl group through a hydrogen-bonded network, with a largely reduced energy barrier relative to the H2 dissociation path. This work demonstrates a green catalytic route that breaks the activity-selectivity trade-off toward the selective hydrogenation of unsaturated aldehydes, which shows great potential in heterogeneous catalysis.
RESUMO
Peroxymonosulfate (PMS) activation is a promising technology for water purification, but the removal performance of multiple pollutant matrices and the mechanism for reactive species transformation in the heterogeneous catalytic system remain ambiguous. Herein, a novel CuFe2O4/diatomite was fabricated for PMS activation to achieve efficient removal of typical pesticides. Uniform distribution of CuFe2O4 on diatomite efficiently alleviated the agglomeration of CuFe2O4 and increased specific surface area (57.20 m2 g-1, 3.8-fold larger than CuFe2O4). CuFe2O4/5% diatomite (5-CFD)/PMS system showed nearly 100% removal efficiency for mixed pesticide solution within 10 min (0.10 g L-1 5-CFD and 0.40 g L-1 PMS) and excellent anti-interference performance towards various coexisting substances (≥90% removal efficiency). The electrochemical measurements confirmed that the lower charge transfer resistance of 5-CFD significantly enhanced the electron-transfer capacity between 5-CFD and PMS, accelerating the reactions among Fe(III)/Fe(II), Cu(II)/Cu(I), and PMS, further generating â¢OH (261.3 µM), 1O2 (138.8 µM), SO4â¢- (11.8 µM), and O2â¢-. The O in reactive oxygen species didn't originate from dissolved oxygen (DO) but PMS, independent of the low solubility of DO and slow diffusion rate of O2 in water. Furthermore, the production of 1O2 went through the process: PMS â O2â¢- â 1O2, and SO4â¢- could rapidly convert into â¢OH. The degradation pathways and the evolution of intermediates were proposed by HPLC-QTOF-MS/MS and DFT calculations. QSAR analysis illustrated that the toxicity became lower with the reaction process. This study provides novel insights into the mechanism for pesticide degradation and active species transformation and the anti-interference capability of systems.
Assuntos
Compostos Férricos , Poluentes Químicos da Água , Espectrometria de Massas em Tandem , Poluentes Químicos da Água/química , Peróxidos/químicaRESUMO
A novel Bi2WO6-g-C3N4/polyvinylidene fluoride (PVDF) composite ultrafiltration (UF) membrane (BWO-CN/PVDF) was prepared by microwave hydrothermal and immersion precipitation phase transformation method. The BWO-CN/PVDF-0.10 exhibited an outstanding photocatalytic removal rate of atrazine (ATZ) (97.65 %) under the simulated sunlight and enhanced permeate flux (1356.09 L·m-2·h-1). The multiple optical and electrochemical detection confirmed that combining ultrathin g-C3N4 and Bi2WO6 can increase carrier separation rate and prolong its lifetime. The quenching test revealed that h+ and 1O2 were the prominent reactive species. Additionally, after a 10-cycle photocatalytic process, the BWO-CN/PVDF membrane presented remarkable reusability and durability. And it showed excellent anti-fouling performance by filtering BSA, HA, SA, and Songhua River under simulated solar irradiation. The molecular dynamic (MD) simulation showed that the combination of g-C3N4 and Bi2WO6 can enhance the interaction between BWO-CN and PVDF. This work opens up a new idea for designing and constructing a highly efficient photocatalytic membrane for water treatment.
RESUMO
Copper-based catalysts serve as the predominant methanol steam reforming material although several fundamental issues remain ambiguous such as the identity of active center and the aspects of reaction mechanism. Herein, we prepare Cu/Cu(Al)Ox catalysts with amorphous alumina-stabilized Cu2O adjoining Cu nanoparticle to provide Cu0-Cu+ sites. The optimized catalyst exhibits 99.5% CH3OH conversion with a corresponding H2 production rate of 110.8 µmol s-1 gcat-1 with stability over 300 h at 240 °C. A binary function correlation between the CH3OH reaction rate and surface concentrations of Cu0 and Cu+ is established based on kinetic studies. Intrinsic active sites in the catalyst are investigated with in situ spectroscopy characterization and theoretical calculations. Namely, we find that important oxygen-containing intermediates (CH3O* and HCOO*) adsorb at Cu0-Cu+ sites with a moderate adsorption strength, which promotes electron transfer from the catalyst to surface species and significantly reduces the reaction barrier of the C-H bond cleavage in CH3O* and HCOO* intermediates.
RESUMO
The metal-support interaction (MSI) in heterogeneous catalysts plays a crucial role in reforming reaction to produce renewable hydrogen, but conventional objects are limited to single metal and support. Herein, we report a type of RhNi/TiO2 catalysts with tunable RhNi-TiO2 strong bimetal-support interaction (SBMSI) derived from structure topological transformation of RhNiTi-layered double hydroxides (RhNiTi-LDHs) precursors. The resulting 0.5RhNi/TiO2 catalyst (with 0.5 wt.% Rh) exhibits extraordinary catalytic performance toward ethanol steam reforming (ESR) reaction with a H2 yield of 61.7%, a H2 production rate of 12.2 L h-1 gcat-1 and a high operational stability (300 h), which is preponderant to the state-of-the-art catalysts. By virtue of synergistic catalysis of multifunctional interface structure (Rh-Niδ--Ov-Ti3+; Ov denotes oxygen vacancy), the generation of formate intermediate (the rate-determining step in ESR reaction) from steam reforming of CO and CHx is significantly promoted on 0.5RhNi/TiO2 catalyst, accounting for its ultra-high H2 production.
RESUMO
The implementation of low-energy cooperative movements is one of the key technologies for the complex control of the movements of humanoid robots. A control method based on optimal parameters is adopted to optimize the energy consumption of the cooperative movements of two humanoid robots. A dynamic model that satisfies the cooperative movements is established, and the motion trajectory of two humanoid robots in the process of cooperative manipulation of objects is planned. By adopting the control method with optimal parameters, the parameters optimization of the energy consumption index function is performed and the stability judgment index of the robot in the movement process is satisfied. Finally, the effectiveness of the method is verified by simulations and experimentations.
RESUMO
The dielectric barrier discharge plasma (DBDP) process has received extensive attention for the removal of organic contaminants from water. A novel microwave-assisted hydrothermal method was used to easily and rapidly synthesize MnFe2O4 catalysts. Based on the DBDP process, MnFe2O4 can enhance 4-fluorophenol (4-FP) abatement from 44.15% to 58.78% through the catalysis within 18 min. Then, the adjunction of O3 generated by discharge can further boost 4-FP degradation to 94.94%. After the whole optimization process is complete, the associated pseudo-first-order reaction kinetic constant and energy efficiency were enhanced from 0.0327 to 0.1536 min-1 and 2067.13 mg kW h-1 to 4444.75 mg kW h-1, respectively. With the help of the condition, blank and radical capture experiments, the catalytic performance caused by MnFe2O4 and O3 was attributed to the joint action of Fenton-like reactions, photocatalysis (ultraviolet, UV), photoassisted Fenton reactions and O3 catalysis. The overall downward trend of the possible intermediate toxicities indicated that the DBDP/MnFe2O4/O3 process can effectively remove and mineralize 4-FP without the generation of more toxic intermediates. In addition, during the 5 cycles, MnFe2O4 can maintain excellent recovery, efficiency and durability. In summary, the coupling of discharge plasma and MnFe2O4 sheds new light on catalysis for wastewater treatment.
RESUMO
The generation of sulfate radicals is a key factor to limit the catalytic activities of sulfate radical-based advanced oxidation processes (SR-AOPs). Microwave irradiation is a specific method to heat solutions via thermal and nonthermal effects, and has attracted an increasing amount of attention in recent years. Herein, we focus on the application of microwaves in SR-AOPs that called SR-MAOPs in environmental remediation, including wastewater, landfill leachate, biological waste sludge and soil, etc. treatment. Various systems including homogeneous and heterogeneous SR-MAOPs were reviewed. In wastewater treatment, not only the dyes and pharmaceutical and personal care products (PPCPs) were considered, the application in actual water matrices was also summarized. In addition, the function of remediation for organic-contaminated soil, landfill leachate and biological waste sludge were assessed using SR-MAOPs. In addition to evaluating the degradation efficiency of various organic pollutants from environment, the dewaterability is another key to treat biological waste sludge. The SR-MAOPs could break up hydrogen bonds and inactivate and denature complex biological molecules via microwave effects to achieve the dewatering of microorganisms in sludge. Furthermore, the COD of the sludge increased to a high level after microwave irradiation of sludge, which means that biopolymers released from microbial cells into the solution. Then, the released COD could be well treated by the SR-MAOPs. Based on the summary, we reveal that SR-MAOPs are potential technologies for environmental remediation, especially for systems with complicated organic compounds.