Tailoring the Li+ Intercalation Energy of Carbon Nanocage Anodes Via Atomic Al-Doping for High-Performance Lithium-Ion Batteries.

Graphitic carbon materials are widely used in lithium-ion batteries (LIBs) due to their stability and high conductivity. However, graphite anodes have low specific capacity and degrade over time, limiting their application. To meet advanced energy storage needs, high-performance graphitic carbon materials are required. Enhancing the electrochemical performance of carbon materials can be achieved through boron and nitrogen doping and incorporating 3D structures such as carbon nanocages (CNCs). In this study, aluminum (Al) is introduced into CNC lattices via chemical vapor deposition (CVD). The hollow structure of CNCs enables fast electrolyte penetration. Density functional theory (DFT) calculations show that Al doping lowers the intercalation energy of Li+. The Al-boron (B)-nitrogen (N-doped CNC (AlBN-CNC) anode demonstrates an ultrahigh rate capacity (≈300 mAh g-1 at 10 A g-1) and a prolonged fast-charging lifespan (862.82 mAh g-1 at 5 A g-1 after 1000 cycles), surpassing the N-doped or BN-doped CNCs. Al doping improves charging kinetics and structural stability. Surprisingly, AlBN-CNCs exhibit increased capacity upon cycling due to enlarged graphitic interlayer spacing. Characterization of graphitic nanostructures confirms that Al doping effectively tailors and enhances their electrochemical properties, providing a new strategy for high-capacity, fast-charging graphitic carbon anode materials for next-generation LIBs.

Ion Co-storage in Porous Organic Frameworks through On-site Coulomb Interactions for High Energy and Power Density Batteries.

Fast and continuous ion insertion is blocked in the common electrodes operating with widely accepted single-ion storage mechanism, primarily due to Coulomb repulsion between the same ions. It results in an irreconcilable conflict between capacity and rate performance. Herein, we designed a porous organic framework with novel multiple-ion co-storage modes, including PF6 - /Li+ , OTF- /Mg2+ , and OTF- /Zn2+ co-storage. The Coulomb interactions between cationic and anionic carriers in the framework can significantly promote electrode kinetics, by rejuvenating fast ion carrier migration toward framework interior. Consequently, the framework via PF6 - /Li+ co-storage mode shows a high energy density of 878 Wh kg-1 cycled more than 20 000 cycles, with an excellent power density of 28 kW kg-1 that is already comparable to commercial supercapacitors. The both greatly improved energy and power densities via the co-storage mode may pave a way for exploring new electrodes that are not available from common single-ion electrodes.

Simultaneous Stabilization of Lithium Anode and Cathode using Hyperconjugative Electrolytes for High-voltage Lithium Metal Batteries.

Although great progress has been made in new electrolytes for lithium metal batteries (LMBs), the intrinsic relationship between electrolyte composition and cell performance remains unclear due to the lack of valid quantization method. Here, we proposed the concept of negative center of electrostatic potential (NCESP) and Mayer bond order (MBO) to describe solvent capability, which highly relate to solvation structure and oxidation potential, respectively. Based on established principles, the selected electrolyte with 1.7 M LiFSI in methoxytrimethylsilane (MOTMS)/ (trifluoromethyl)trimethylsilane (TFMTMS) shows unique hyperconjugation nature to stabilize both Li anode and high-voltage cathode. The 4.6 V 30 µm Li||4.5 mAh cm-2 lithium cobalt oxide (LCO) (low N/P ratio of 1.3) cell with our electrolyte shows stable cycling with 91 % capacity retention over 200 cycles. The bottom-up design concept of electrolyte opens up a general strategy for advancing high-voltage LMBs.

Localized Ligands Assist Ultrafast Multivalent-Cation Intercalation Pseudocapacitance.

Rechargeable batteries based on multivalent cation (Mvn+ , n>1) carriers are considered potentially low-cost alternatives to lithium-ion batteries. However, the high charge-density Mvn+ carriers generally lead to sluggish kinetics and poor structural stability in cathode materials. Herein, we report an Mvn+ storage via intercalation pseudocapacitance mechanism in a 2D bivalve-like organic framework featured with localized ligands. By switching from conventional intercalation to localized ligand-assisted-intercalation pseudocapacitance, the organic cathode exhibits unprecedented fast kinetics with little structural change upon intercalation. It thus enables an excellent power density of 57 kW kg-1 over 20000 cycles for Ca2+ storage and a power density of 14 kW kg-1 with a long cycling life over 45000 cycles for Zn2+ storage. This work may provide a largely unexploited route toward constructing a local dynamic coordination microstructure for ultrafast Mvn+ storage.

True Reaction Sites on Discharge in Li-O2 Batteries.

In the pursuit of an advanced Li-O2 battery, the true reaction sites in the cathode determined its cell performance and the catalyst design. When the first layer of insulating Li2O2 solid is deposited on the electrode substrate during discharging, the following O2 reduction to Li2O2 could take place either at the electrode|Li2O2 interface or at the Li2O2|electrolyte interface. The mechanism decides the strategies of catalyst design; however, it is still mysterious. Here, we used rotate ring-disk electrode to deposit a dense Li2O2 film and labeled the Li2O2 product with 16O/18O isotope. By identification of the distribution of the Li216O2 and Li218O2 in the Li2O2 film using new characteristic signals of Li216O2 and Li218O2, our results show that O2 is reduced to Li2O2 at both interfaces. A sandwich structure of Li218O2|Li216O2|Li218O2 was identified at the electrode surface when the electrode was discharged under 16O2 and then 18O2. The electrode|Li2O2 interface is the major reaction site, and it contributes to 75% of the overall reaction. This new mechanism raises new challenges and new strategies for the catalyst design of Li-O2 batteries.

Practical Prelithiation of 4.5 V LiCoO2 ||Graphite Batteries by a Passivated Lithium-Carbon Composite.

Prelithiation can replenish active Li into the battery to compensate the Li consumption due to the formation of solid electrolyte interphase (SEI) on the electrode surface, therefore improving the energy density of Li-ion batteries (LIBs), especially for batteries using electrode materials with low initial Coulombic efficiency (ICE). However, practical prelithiation in LIBs is a challenge since most lithiated compounds with high specific capacity are unstable and industrially incompatible. Herein, an effective prelithiation strategy is demonstrated by using a lithium-carbon (Li-C) microsphere composite. These Li-C microspheres are passivated by a self-assembled monolayer of octadecylphosphonic acid, which suppresses the reaction between Li and commonly used slurry solvent 1-methyl-2-pyrrolidinone (NMP). After the addition of passivated Li-C into the NMP-based graphite slurry, the ICE of the graphite||Li half-cell boosts from 88.5% to 100.5%. In a 4.5 V LiCoO2 (LCO)||graphite full-cell, the supplementary Li source avoids excessive delithiation of LCO, thus suppressing the destructive phase transformation at high delithiation potential. As a result, the prelithiated LCO||graphite full-cell presents an initial discharge capacity of 201 mAh g-1 and the capacity retention after 100 cycles increases by 7.1 %. This work provides a practical approach for developing high energy density and long cycle life LIBs.

A preoperative prediction model based on Lymphocyte-C-reactive protein ratio predicts postoperative anastomotic leakage in patients with colorectal carcinoma: a retrospective study.

BACKGROUND & AIMS: Lymphocyte-C-reactive Protein Ratio (LCR) has been demonstrated as a promising new marker for predicting surgical and oncological outcomes in colorectal carcinoma (CRC). However, anastomotic leakage (AL) is also likely related to this inflammatory marker. Herein, we aimed to identify preoperative predictors of AL and build and develop a novel model able to identify patients at risk of developing AL. METHODS: We collected 858 patients with CRC undergoing elective radical operation between 2007 and 2018 at a single center were retrospectively reviewed. We performed univariable and multivariable analyses and built a multivariable model that predicts AL based on preoperative factors. Propensity adjustment was used to correct the bias introduced by non-random matching of the LCR. The model's performance was evaluated by using the area under the receiver operator characteristic curves (AUROCs), decision curve analysis (DCA), Brier scores, D statistics, and R2 values. RESULTS: Age, nutrition risk screening 2002 (NRS2002) score, tumor location and LCR, together with hemoglobin < 90 g/l, were independent predictors of AL. The models built on these variables showed good performance (internal validation: c-statistic = 0.851 (95%CI 0.803-0.965), Brier score = 0.049; temporal validation: c-statistic = 0.777 (95%CI 0.823-0.979), Brier score = 0.096). A regression equation to predict the AL was also established by multiple linear regression analysis: [Age(≥ 60 year) × 1.281] + [NRS2002(≥ 3) × 1.341] + [Tumor location(pt.) × 1.348]-[LCR(≤ 6000) × 1.593]-[Hemoglobin(< 90 g/L) × 1.589]-6.12. CONCLUSION: Preoperative LCR is an independent predictive factor for AL. A novel model combining LCR values, age, tumor location, and NRS2002 provided an excellent preoperative prediction of AL in patients with CRC. The nomogram can help clinical decision-making and support future research.

An Approach for Time Synchronization of Wireless Accelerometer Sensors Using Frequency-Squeezing-Based Operational Modal Analysis.

Wireless sensor networks usually suffer from the issue of time synchronization discrepancy due to environmental effects or clock management collapse. This will result in time delays between the dynamic responses collected by wireless sensors. If non-synchronized dynamic response data are directly used for structural modal identification, it leads to the misestimation of modal parameters. To overcome the non-synchronization issue, this study proposes a time synchronization approach to detect and correct asynchronous dynamic responses based on frequency domain decomposition (FDD) with frequency-squeezing processing (FSP). By imposing the expected relationship between modal phase angles extracted from the first-order singular value spectrum, the time lags between different sensors can be estimated, and synchronization can be achieved. The effectiveness of the proposed approach is fully demonstrated by numerical and experimental studies, as well as field measurement of a large-span spatial structure. The results verify that the proposed approach is effective for the time synchronization of wireless accelerometer sensors.

Room-Temperature All-Solid-State Sodium Battery Based on Bulk Interfacial Superionic Conductor.

All-solid-state sodium batteries (ASSSBs) are attractive alternatives to lithium-ion batteries for grid-scale energy storage due to their high safety and ubiquitous distribution of Na sources. A critical component for ASSSB is sodium-ion conducting solid-state electrolyte (SSE). Here, we report a high-performance sodium-ion SSE with the recently developed bulk interfacial superionic conductor (BISC) concept. The ionic conductivity and areal conductance of the Na+ BISC at 25 °C reaches 6.5 × 10-4 S cm-1 and 260 mS cm-2, respectively. Using NaxCo0.7Mn0.3O2 (x ≈ 1.0, NaCMO) as the cathode active material, all-solid-state Na||NaCMO batteries exhibiting small overpotential and ∼180 cycle life are demonstrated under room temperature. This approach may also be used to prepare other metal ion, such as Mg2+, Al3+, and K+, based all-solid-state batteries.

Photocatalytic Abstraction of Hydrogen Atoms from Water Using Hydroxylated Graphitic Carbon Nitride for Hydrogenative Coupling Reactions.

Employing pure water, the ultimate green source of hydrogen donor to initiate chemical reactions that involve a hydrogen atom transfer (HAT) step is fascinating but challenging due to its large H-O bond dissociation energy (BDEH-O =5.1 eV). Many approaches have been explored to stimulate water for hydrogenative reactions, but the efficiency and productivity still require significant enhancement. Here, we show that the surface hydroxylated graphitic carbon nitride (gCN-OH) only requires 2.25 eV to activate H-O bonds in water, enabling abstraction of hydrogen atoms via dehydrogenation of pure water into hydrogen peroxide under visible light irradiation. The gCN-OH presents a stable catalytic performance for hydrogenative N-N coupling, pinacol-type coupling and dehalogenative C-C coupling, all with high yield and efficiency, even under solar radiation, featuring extensive impacts in using renewable energy for a cleaner process in dye, electronic, and pharmaceutical industries.

Self-Assembled Monolayers for Batteries.

Current studies in the Li-battery field are focusing on building systems with higher energy density than ever before. The path toward this goal, however, should not ignore aspects such as safety, stability, and cycling life. These issues frequently originate from interfacial instability, and therefore, precise surface chemistry that allows for accurate control of material surface and interfaces is much in demand for advanced battery research. Molecular self-assembly as a surface chemistry tool is considered to surpass many conventional coating techniques due to its intrinsic merits such as spontaneous organization, molecular-scale uniformity, and structural diversity. Recent publications have demonstrated the power of self-assembled monolayers (SAMs) in addressing pressing issues in the battery field such as the chemical stability of Li, but many more investigations are needed to fully explore the potential and impact of this technique on energy storage. This perspective is the first of its kind devoted to SAMs in batteries and related materials. Recent research progress on SAMs in batteries is reviewed and mainly falls in two categories, including the improvement of chemical stability and the regulation of nucleation in conversion electrode reactions. Future applications and consideration of SAMs in energy storage are discussed. We believe these summaries and outlooks are highly stimulative and may benefit future advancements in battery chemistry.

Drivers' car-following behaviours in low-illumination conditions.

Low illumination is a special driving condition that negatively affects drivers' vision, information acquisition (IA) ability, distance recognition and risk perception. This study evaluated drivers' car-following behaviours and characteristics using questionnaire-based research conducted among 214 drivers in Hefei. In this study, exploratory factor analysis (EFA) was used to determine the factor structure of the scale, and the internal consistency of all factors was good. The results show that low illumination strongly influences drivers' following behaviour and that they tend to choose safe and conservative ways to follow leading vehicles. Street lights are beneficial, aiding drivers' IA and their grasp of surrounding or distant environments. Myopic drivers performed worse in car following when driving in a low illumination environment, regardless of the presence of street lights. Drivers with astigmatism performed worse when street lights were present. Drivers who reported more aberrant behaviours were more aggressive when driving and tended to adopt shorter following distances at night. Practitioner summary: This study developed two scales to evaluate drivers' car-following behaviours and characteristics. A total of 214 drivers participated in the survey. Low illumination strongly influences drivers' following behaviour. Drivers who reported more aberrant behaviours were more aggressive when driving and tended to adopt shorter following distances at night.

Superionic Conductors via Bulk Interfacial Conduction.

Superionic conductors with ionic conductivity on the order of mS cm-1 are expected to revolutionize the development of solid-state batteries (SSBs). However, currently available superionic conductors are limited to only a few structural families such as garnet oxides and sulfide-based glass/ceramic. Interfaces in composite systems such as alumina in lithium iodide have long been identified as a viable ionic conduction channel, but practical superionic conductors employing the interfacial conduction mechanism are yet to be realized. Here we report a novel method that creates continuous interfaces in the bulk of composite thin films. Ions can conduct through the interface, and consequently, the inorganic phase can be ionically insulating in this type of bulk interface superionic conductors (BISCs). Ionic conductivities of lithium, sodium, and magnesium ion BISCs have reached 1.16 mS cm-1, 0.40 mS cm-1, and 0.23 mS cm-1 at 25 °C in 25 µm thick films, corresponding to areal conductance as high as 464 mS cm-2, 160 mS cm-2, and 92 mS cm-2, respectively. Ultralow overpotential and stable long-term cycling for up to 5000 h were obtained for solid-state Li metal symmetric batteries employing Li ion BISCs. This work opens new structural space for superionic conductors and urges for future investigations on detailed conduction mechanisms and material design principles.

Anchoring SnS2 on TiC/C Backbone to Promote Sodium Ion Storage by Phosphate Ion Doping.

Tin disulfide (SnS2 ) shows promising properties toward sodium ion storage with high capacity, but its cycle life and high rate capability are still undermined as a result of poor reaction kinetics and unstable structure. In this work, phosphate ion (PO4 3- )-doped SnS2 (P-SnS2 ) nanoflake arrays on conductive TiC/C backbone are reported to form high-quality P-SnS2 @TiC/C arrays via a hydrothermal-chemical vapor deposition method. By virtue of the synergistic effect between PO4 3- doping and conductive network of TiC/C arrays, enhanced electronic conductivity and enlarged interlayer spacing are realized in the designed P-SnS2 @TiC/C arrays. Moreover, the introduced PO4 3- can result in favorable intercalation/deintercalation of Na+ and accelerate electrochemical reaction kinetics. Notably, lower bandgap and enhanced electronic conductivity owing to the introduction of PO4 3- are demonstrated by density function theory calculations and UV-visible absorption spectra. In view of these positive factors above, the P-SnS2 @TiC/C electrode delivers a high capacity of 1293.5 mAh g-1 at 0.1 A g-1 and exhibits good rate capability (476.7 mAh g-1 at 5 A g-1 ), much better than the SnS2 @TiC/C counterpart. This work may trigger new enthusiasm on construction of advanced metal sulfide electrodes for application in rechargeable alkali ion batteries.

Polymer Electrolyte Glue: A Universal Interfacial Modification Strategy for All-Solid-State Li Batteries.

In recent years solid Li+ conductors with competitive ionic conductivity to those of liquid electrolytes have been reported. However, the incorporation of highly conductive solid electrolytes into the lithium-ion batteries is still very challenging mainly due to the high resistance existing at the solid-solid interfaces throughout the battery structure. Here, we demonstrated a universal interfacial modification strategy through coating a curable polymer-based glue electrolyte between the electrolyte and electrodes, aiming to address the poor solid-solid contact and thus decrease high interfacial resistance. The liquid glue exhibits both great wettability as well as chemical/electrochemical stability to most of the electrodes, and it can be easily solidified into a polymer electrolyte layer through a "post-curing" treatment. As a result, symmetric Li batteries with the glue modification exhibit much smaller impedance and enhanced stability upon plating/stripping cycles compared to the batteries without glue modification. The all-solid-state Li-S batteries with glue modification show significantly enhanced performances. The strategy of developing glue electrolytes to improve the electrode-electrolyte interface contact provides an alternative option for improving many other solid-state batteries.

Advanced Lithium Metal-Carbon Nanotube Composite Anode for High-Performance Lithium-Oxygen Batteries.

The low Coulombic efficiency and hazardous dendrite growth hinder the adoption of lithium anode in high-energy density batteries. Herein, we report a lithium metal-carbon nanotube (Li-CNT) composite as an alternative to the long-term untamed lithium electrode to address the critical issues associated with the lithium anode in Li-O2 batteries, where the lithium metal is impregnated in a porous carbon nanotube microsphere matrix (CNTm) and surface-passivated with a self-assembled monolayer of octadecylphosphonic acid as a tailor-designed solid electrolyte interphase (SEI). The high specific surface area of the Li-CNT composite reduces the local current density and thus suppresses the lithium dendrite formation upon cycling. Moreover, the tailor-designed SEI effectively separates the Li-CNT composite from the electrolyte solution and prevents the latter's further decomposition. When the Li-CNT composite anode is coupled with another CNTm-based O2 cathode, the reversibility and cycle life of the resultant Li-O2 batteries are drastically elevated.

Solid Base Bi24 O31 Br10 (OH)δ with Active Lattice Oxygen for the Efficient Photo-Oxidation of Primary Alcohols to Aldehydes.

The selective oxidation of primary alcohols to aldehydes by O2 instead of stoichiometric oxidants (for example, MnVII , CrVI , and OsIV ) is an important but challenging process. Most heterogeneous catalytic systems (thermal and photocatalysis) require noble metals or harsh reaction conditions. Here we show that the Bi24 O31 Br10 (OH)δ photocatalyst is very efficient in the selective oxidation of a series of aliphatic (carbon chain from C1 to C10 ) and aromatic alcohols to their corresponding aldehydes/ketones under visible-light irradiation in air at room temperature, which would be challenging for conventional thermal and light-driven processes. High quantum efficiencies (71 % and 55 % under 410 and 450 nm irradiation) are reached in a representative reaction, the oxidation of isopropanol. We propose that the outstanding performance of the Bi24 O31 Br10 (OH)δ photocatalyst is associated with basic surface sites and active lattice oxygen that boost the dehydrogenation step in the photo-oxidation of alcohols.

Efficient Solar-Driven Hydrogen Transfer by Bismuth-Based Photocatalyst with Engineered Basic Sites.

Photocatalytic organic conversions involving a hydrogen transfer (HT) step have attracted much attention, but the efficiency and selectivity under visible light irradiation still needs to be significantly enhanced. Here we have developed a noble metal-free, basic-site engineered bismuth oxybromide [Bi24O31Br10(OH)δ] that can accelerate the photocatalytic HT step in both reduction and oxidation reactions, i.e., nitrobenzene to azo/azoxybenzene, quinones to quinols, thiones to thiols, and alcohols to ketones under visible light irradiation and ambient conditions. Remarkably, quantum efficiencies of 42% and 32% for the nitrobenzene reduction can be reached under 410 and 450 nm irradiation, respectively. The Bi24O31Br10(OH)δ photocatalyst also exhibits excellent performance in up-scaling and stability under visible light and even solar irradiation, revealing economic potential for industrial applications.

Alkali metal ion templated transition metal formate framework materials: synthesis, crystal structures, ion migration, and magnetism.

Four transition metal formate coordination polymers with anionic frameworks, namely, Na[Mn(HCOO)3], K[Mn(HCOO)3], Na2[Cu3(HCOO)8], and K2[Cu5(HCOO)12], were synthesized using a mild solution chemistry approach. Multitemperature single-crystal (100-300 K) and powder X-ray diffraction studies of the compounds reveal structures of large diversity ranging from cubic chiral Na-Mn formate to triclinic Na-Cu formate. The structural variety is caused by the nature of the transition metals, the alkali metal ion templation, and the versatility of the formate group, which offers metal-metal coordination through three different O-C-O bridging modes (syn-syn, syn-anti, anti-anti) in addition to metal-metal bridging via a single oxygen atom. The two manganese(II) compounds contain mononuclear, octahedrally coordinated moieties, but the three-dimensional connectivity between the manganese octahedra is very different in the two structures. The two copper frameworks, in contrast, consist of binuclear and mononuclear moieties (Na-Cu formate) and trinuclear and mononuclear moieties (K-Cu formate), respectively. Procrystal electron density analysis of the compounds indicates one-dimensional K(+)-ion conductivity in K-Mn and K-Cu, and the nature of the proposed potassium ion migration is compared with results from similar analysis on known Na(+) and K(+) ion conductors. K-Mn and Na-Mn were tested as cathode materials, but this resulted in poor reversibility due to low conductivity or structural collapse. The magnetic properties of the compounds were studied by vibrating sample magnetometric measurements, and their thermal stabilities were determined by thermogravimetric analysis and differential thermal analysis. Despite structural differences, the metal formates that contain the same transition metal have similar magnetic properties and thermal decomposition pathways, that is, the nature of the transition metal controls the compound properties.

Optimised photocatalytic hydrogen production using core-shell AuPd promoters with controlled shell thickness.

The development of efficient photocatalytic routines for producing hydrogen is of great importance as society moves away from energy sources derived from fossil fuels. Recent studies have identified that the addition of metal nanoparticles to TiO2 greatly enhances the photocatalytic performance of these materials towards the reforming of alcohols for hydrogen production. The core-shell structured Au-Pd bimetallic nanoparticle supported on TiO2 has being of interest as it exhibited extremely high quantum efficiencies for hydrogen production. However, the effect of shell composition and thickness on photocatalytic performance remains unclear. Here we report the synthesis of core-shell structured AuPd NPs with the controlled deposition of one and two monolayers (ML) equivalent of Pd onto Au NPs by colloidal and photodeposition methods. We have determined the shell composition and thickness of the nanoparticles by a combination of X-ray absorption fine structure and X-ray photoelectron spectroscopy. Photocatalytic ethanol reforming showed that the core-shell structured Au-Pd promoters supported on TiO2 exhibit enhanced activity compared to that of monometallic Au and Pd as promoters, whilst the core-shell Au-Pd promoters containing one ML equivalent Pd provide the optimum reactivity.