Ultrahigh Temperature Copper-Ceramic Flexible Hybrid Electronics.

Advanced high-temperature materials, metals and ceramics, have been widely sought after for printed flexible electronics under extreme conditions. However, the thermal stability and electronic performance of these materials generally diminish under extreme environments. Additionally, printable electronics typically utilize nanoscale materials, which further exacerbate the problems with oxidation and corrosion at those extreme conditions. Here we report superior thermal and electronic stability of printed copper-flexible ceramic electronics by means of integral hybridization and passivation strategies. High electric conductivity (5.6 MS/m) and thermal stability above 400 °C are achieved in the printed graphene-passivated copper platelet features, while thermal management and stability above 1000 °C of printed electronics can be achieved by using either ultrathin alumina or flexible alumina aerogel sheets. The findings shown here provide a pathway toward printed, extreme electronic applications for harsh service conditions.

Printed copper-nanoplate conductor for electro-magnetic interference.

As one of the conductive ink materials with high electric conductivity, elemental copper (Cu) based nanocrystals promise for printable electronics. Here, single crystalline Cu nanoplates were synthesized using a facile hydrothermal method. Size engineering of Cu nanoplates can be rationalized by using the LaMer model and the versatile Cu conductive ink materials are suitable for different printing technologies. The printed Cu traces show high electric conductivity of 6 MS m-1, exhibiting electro-magnetic interference shielding efficiency value of 75 dB at an average thicknesses of 11µm. Together with flexible alumina ceramic aerogel substrates, it kept 87% conductivity at the environmental temperature of 400 °C, demonstrating the potential of Cu conductive ink for high-temperature printable electronics applications.

The Middle Road Less Taken: Electronic-Structure-Inspired Design of Hybrid Photocatalytic Platforms for Solar Fuel Generation.

The development of efficient solar energy conversion to augment other renewable energy approaches is one of the grand challenges of our time. Water splitting, or the disproportionation of H2O into energy-dense fuels, H2 and O2, is undoubtedly a promising strategy. Solar water splitting involves the concerted transfer of four electrons and four protons, which requires the synergistic operation of solar light harvesting, charge separation, mass and charge transport, and redox catalysis processes. It is unlikely that individual materials can mediate the entire sequence of charge and mass transport as well as energy conversion processes necessary for photocatalytic water splitting. An alternative approach, emulating the functioning of photosynthetic systems, involves the utilization of hybrid systems wherein different components perform the various functions required for solar water splitting. The design of such hybrid systems requires the multiple components to operate in lockstep with optimal thermodynamic driving forces and interfacial charge transfer kinetics. This Account describes a new class of nanoscale heterostructures comprising M xV2O5 nanowires, where M is a p-block cation with a ( n - 1) d10 ns2 np0 electronic configuration characterized by a stereoactive lone pair of electrons and x is its stoichiometry, interfaced with II-VI semiconductor quantum dots (QDs). Photocatalytic water splitting involves the transfer of excited-state holes from QDs to mid-gap states (derived from the stereoactive lone pairs of p-block cations) of nanowires, hole transport through nanowires, the reduction of protons at a QD-immobilized catalyst, and water oxidation at an anode. The M xV2O5/QD architectures provide a vast design space for evolutionary optimization of function with considerable tunability of composition and structure of the individual components as well as of the interfacial structure, thereby facilitating programmability of absorption spectra, energetic offsets, and charge-transfer reactivity. The available design space spans choice of the p-block cation M, its stoichiometry x, the composition and size of various QDs, and the nature of the nanowire/QD interface. This multivariate parameter space has been navigated by integrating first-principles modeling, diversified synthesis, spectroscopic measurements, and catalytic evaluation to facilitate the rational design of several generations of heterostructures and the systematic improvement of their photocatalytic performance. The electronic structures of the target heterostructures are predicted by DFT calculations in light of the revised lone pair model of stereoactive structural distortions and evaluated by hard X-ray photoelectron spectroscopy such as to systematically tune the interfacial band offsets. Central to this approach is the development of a topochemical "etch-a-sketch" intercalation approach that allows for facile installation of p-block cations in metastable polymorphs of V2O5. The interfacial charge transfer kinetics of M xV2O5/QD heterostructures is further evaluated by transient absorption spectroscopy to measure excited-state charge-transfer dynamics and is found to depend sensitively on interfacial structure and the thermodynamic driving forces in accordance with Marcus theory. The integration of theory and experiment has allowed for the design of viable photocatalytic architectures exemplified by the exceptional catalytic performance of ß-Pb xV2O5/CdX (X= S, Se) architectures, which has subsequently been elaborated to other lone-pair M xV2O5 compounds, demonstrating the effective exploitation of the opportunities for programmability available in the design space.

Type-II heterostructures of α-V2O5 nanowires interfaced with cadmium chalcogenide quantum dots: Programmable energetic offsets, ultrafast charge transfer, and photocatalytic hydrogen evolution.

We synthesized a new class of heterostructures by depositing CdS, CdSe, or CdTe quantum dots (QDs) onto α-V2O5 nanowires (NWs) via either successive ionic layer adsorption and reaction (SILAR) or linker-assisted assembly (LAA). SILAR yielded the highest loadings of QDs per NW, whereas LAA enabled better control over the size and properties of QDs. Soft and hard x-ray photoelectron spectroscopy in conjunction with density functional theory calculations revealed that all α-V2O5/QD heterostructures exhibited Type-II band offset energetics, with a staggered gap where the conduction- and valence-band edges of α-V2O5 NWs lie at lower energies (relative to the vacuum level) than their QD counterparts. Transient absorption spectroscopy measurements revealed that the Type-II energetic offsets promoted the ultrafast (10-12-10-11 s) separation of photogenerated electrons and holes across the NW/QD interface to yield long-lived (10-6 s) charge-separated states. Charge-transfer dynamics and charge-recombination time scales varied subtly with the composition of heterostructures and the nature of the NW/QD interface, with both charge separation and recombination occurring more rapidly within SILAR-derived heterostructures. LAA-derived α-V2O5/CdSe heterostructures promoted the photocatalytic reduction of aqueous protons to H2 with a 20-fold or greater enhancement relative to isolated colloidal CdSe QDs or dispersed α-V2O5 NWs. The separation of photoexcited electrons and holes across the NW/QD interface could thus be exploited in redox photocatalysis. In light of their programmable compositions and properties and their Type-II energetics that drive ultrafast charge separation, the α-V2O5/QD heterostructures are a promising new class of photocatalyst architectures ripe for continued exploration.

Hole Extraction by Design in Photocatalytic Architectures Interfacing CdSe Quantum Dots with Topochemically Stabilized Tin Vanadium Oxide.

Tackling the complex challenge of harvesting solar energy to generate energy-dense fuels such as hydrogen requires the design of photocatalytic nanoarchitectures interfacing components that synergistically mediate a closely interlinked sequence of light-harvesting, charge separation, charge/mass transport, and catalytic processes. The design of such architectures requires careful consideration of both thermodynamic offsets and interfacial charge-transfer kinetics to ensure long-lived charge carriers that can be delivered at low overpotentials to the appropriate catalytic sites while mitigating parasitic reactions such as photocorrosion. Here we detail the theory-guided design and synthesis of nanowire/quantum dot heterostructures with interfacial electronic structure specifically tailored to promote light-induced charge separation and photocatalytic proton reduction. Topochemical synthesis yields a metastable ß-Sn0.23V2O5 compound exhibiting Sn 5s-derived midgap states ideally positioned to extract photogenerated holes from interfaced CdSe quantum dots. The existence of these midgap states near the upper edge of the valence band (VB) has been confirmed, and ß-Sn0.23V2O5/CdSe heterostructures have been shown to exhibit a 0 eV midgap state-VB offset, which underpins ultrafast subpicosecond hole transfer. The ß-Sn0.23V2O5/CdSe heterostructures are further shown to be viable photocatalytic architectures capable of efficacious hydrogen evolution. The results of this study underscore the criticality of precisely tailoring the electronic structure of semiconductor components to effect rapid charge separation necessary for photocatalysis.

Molecular copper decomposition ink for printable electronics.

Nanostructured metal materials are the frontrunners of numerous electronic advancements. While realizing such potential, it is indispensable to address their oxidation and stability drawbacks, which are due to their high surface energies. Here, we report printable and air-stable molecular metal ink materials from metal-organic decomposition by using copper ions, including both copper formate and aqueous copper-amine complexes. By complexing copper formate with amines, the decomposition temperature of the printed molecular copper ink can be achieved at 100 °C, while maintaining its electric conductivity. The printed copper conductors exhibit a high electric conductivity of 35 MS m-1 (>50% of bulk copper's electric conductivity at room temperature) and an electromagnetic interference shielding effectiveness of 63 dB. The findings shown here of the molecular decomposition ink are promising for applications in printable electronics.

Surface-passivated Cu conductors for high-temperature sulfurous environments.

Advanced materials capable of withstanding extreme environments garner extensive interest in the development of next-generation advanced anti-corrosion electronics. Herein, we report that the surface passivation of printed copper conductors imparts corrosion resistance in high-temperature sulfurous environments while maintaining a high electrical conductivity of 4.42 MS m-1 when subjected to a sulfur-containing environment at 350 °C for 12 h. This study provides potential for the development of surface-passivated copper conductors that are resistant to the sulfidizing environments found in several applications of modern technology.

Ti-Alloying of BaZrS3 Chalcogenide Perovskite for Photovoltaics.

BaZrS3, a prototypical chalcogenide perovskite, has been shown to possess a direct band gap, an exceptionally strong near band edge light absorption, and good carrier transport. Coupled with its great stability, nontoxicity with earth-abundant elements, it is thus a promising candidate for thin film solar cells. However, its reported band gap in the range of 1.7-1.8 eV is larger than the optimal value required to reach the Shockley-Queisser limit of a single-junction solar cell. Here, we report the synthesis of Ba(Zr1-x Ti x )S3 perovskite compounds with a reduced band gap. It is found that Ti-alloying is extremely effective in band gap reduction of BaZrS3: a mere 4 atom % alloying decreases the band gap from 1.78 to 1.51 eV, resulting in a theoretical maximum power conversion efficiency of 32%. Higher Ti-alloying concentration is found to destabilize the distorted chalcogenide perovskite phase.