Effective Reduction of CO2 with Aromatic Amines into N-Formamides Triggered by Noble-Free Metal-Organic Framework Catalysts Under Mild Conditions.

The reductive transformation of carbon dioxide (CO2) into high-valued N­formamides matches well with the atom economy and the sustainable development intention. Nevertheless, developing a noble-free metal catalyst under mild reaction conditions is desirable and challenging. Herein, a caged metal-organic framework (MOFs) [H2N(CH3)2]2{[Ni3(µ3-O)(XN)(BDC)3]·6DMF}n (1) (XN = 6″-(pyridin-4-yl)-4,2″:4″,4″'-terpyridine), H2BDC = terephthalic acid) is harvested, presenting high thermal and chemical stabilities. Catalytic investigation reveals that 1 as a renewable noble-free MOFs catalyst can catalyze the CO2 reduction conversion with aromatic amines tolerated by broad functional groups at least ten times, resulting in various formamides in excellent yields and selectivity under the mildest reaction system (room temperature and 1 bar CO2). Density functional theory (DFT) theoretical studies disclose the applicable reaction path, in which the CO2 hydrosilylation process is initiated by the [Ni3] cluster interaction with CO2 via η2-C, O coordination mode. This work may open up an avenue to seek high-efficiency noble-free catalysts in CO2 chemical reduction into high value-added chemicals.

All-fiber hectowatt radially polarized laser system.

A high-power all-fiber radially polarized laser system is demonstrated, in which an integrated nanograting mode convertor (S-wave plate) is used for the generation of radially polarized beam. Experimentally, a 1-W radially polarized beam was used as the seed laser, whose mode purity and mode extinction ratio (MER) were 96.5% and 98.3%, respectively. A single-stage few-mode fiber amplifier was employed to boost the 1-W seed laser to an average power of 113.2 W, when the pump power was 160 W. The corresponding slope efficiency and beam quality factor (M2) were approximately 72% and 2.3%, respectively. Moreover, the mode purity and MER of the amplified radially polarized laser were measured to be 95.7% and 97%, respectively. To the best of our knowledge, this is the highest output power from an all-fiber radially polarized laser system without obvious degradations of the mode purity and MER.

Investigations of a 1018 nm gain-switched Yb-doped fiber oscillator.

In this paper, we investigate a 1018 nm gain-switched ytterbium-doped fiber oscillator at a low repetition rate in terms of theory and experiment. Theoretically, a numerical model applicable to a 1018 nm gain-switched ytterbium-doped fiber laser was established. The influence of the pump peak power and active fiber lengths on the 1018 nm gain-switched ytterbium-doped fiber laser was numerically simulated. Experimentally, a compact 1018 nm all-fiber-structured pulsed laser oscillator is constructed, in which a pulse width of 110 ns and a single-pulse energy of 0.1 mJ were obtained. Moreover, the experimental results are in agreement with the numerical simulation ones. To the best of our knowledge, this is the first time that gain-switching technology has been applied to 1018 nm fiber lasers to generate nanosecond pulsed lasers. The model and experimental results can provide a reference for the engineering design of the same type of low repetition rate fiber lasers below the kilohertz level.

Low-Complexity 2D-DOD and 2D-DOA Estimation in Bistatic MIMO Radar Systems: A Reduced-Dimension MUSIC Algorithm Approach.

This paper presents a new technique for estimating the two-dimensional direction of departure (2D-DOD) and direction of arrival (2D-DOA) in bistatic uniform planar array Multiple-Input Multiple-Output (MIMO) radar systems. The method is based on the reduced-dimension (RD) MUSIC algorithm, aiming to achieve improved precision and computational efficiency. Primarily, this pioneering approach efficiently transforms the four-dimensional (4D) estimation problem into two-dimensional (2D) searches, thus reducing the computational complexity typically associated with conventional MUSIC algorithms. Then, exploits the spatial diversity of array response vectors to construct a 4D spatial spectrum function, which is crucial in resolving the complex angular parameters of multiple simultaneous targets. Finally, the objective is to simplify the spatial spectrum to a 2D search within a 4D measurement space to achieve an optimal balance between efficiency and accuracy. Simulation results validate the effectiveness of our proposed algorithm compared to several existing approaches, demonstrating its robustness in accurately estimating 2D-DOD and 2D-DOA across various scenarios. The proposed technique shows significant computational savings and high-resolution estimations and maintains high precision, setting a new benchmark for future explorations in the field.

Direct Position Determination of Non-Gaussian Sources for Multiple Nested Arrays: Discrete Fourier Transform and Taylor Compensation Algorithm.

This paper delves into the problem of direct position determination (DPD) for non-Gaussian sources. Existing DPD algorithms are hindered by their high computational complexity from exhaustive grid searches and a disregard for the received signal characteristics by multiple nested arrays (MNAs). To address these issues, the paper proposes a novel DPD algorithm for non-Gaussian sources with MNAs: the Discrete Fourier Transform (DFT) and Taylor compensation algorithm. Initially, the fourth-order cumulant matrix of the received signal is computed, and the vectorizing method is applied. Subsequently, a computationally efficient DPD cost function is proposed by leveraging a normalized DFT matrix to reduce complexity. Finally, first-order Taylor compensation is utilized to enhance the accuracy of the localization results. The superiority of the proposed algorithm is demonstrated through numerical simulation results.

Highly Sensitive Temperature-Pressure Bimodal Aerogel with Stimulus Discriminability for Human Physiological Monitoring.

Multimodal sensor with high sensitivity, accurate sensing resolution, and stimuli discriminability is very desirable for human physiological state monitoring. A dual-sensing aerogel is fabricated with independent pyro-piezoresistive behavior by leveraging MXene and semicrystalline polymer to assemble shrinkable nanochannel structures inside multilevel cellular walls of aerogel for discriminable temperature and pressure sensing. The shrinkable nanochannels, controlled by the melt flow-triggered volume change of semicrystalline polymer, act as thermoresponsive conductive channels to endow the pyroresistive aerogel with negative temperature coefficient of resistance of -10.0% °C-1 and high accuracy within 0.2 °C in human physiological temperature range of 30-40 °C. The flexible cellular walls, working as pressure-responsive conductive channels, enable the piezoresistive aerogel to exhibit a pressure sensitivity up to 777 kPa-1 with a detectable pressure limit of 0.05 Pa. The pyro-piezoresistive aerogel can detect the temperature-dependent characteristics of pulse pressure waveforms from artery vessels under different human body temperature states.

Printable and Stretchable Temperature-Strain Dual-Sensing Nanocomposite with High Sensitivity and Perfect Stimulus Discriminability.

Skin-mountable physical sensors that can individually detect mechanical deformations with high strain sensitivity within a broad working strain range and temperature variations with accurate temperature resolution are a sought-after technology. Herein, a stretchable temperature and strain dual-parameter sensor that can precisely detect and distinguish strain from temperature stimuli without crosstalk is developed, based on a printable titanium carbide (MXene)-silver nanowire (AgNW)-PEDOT:PSS-tellurium nanowire (TeNW) nanocomposite. With this dual-parameter sensor, strain and temperature are effectively transduced into electrically isolated signals through the electrically conductive MXene-AgNW and thermoelectric PEDOT:PSS-TeNW components, respectively. In addition, the synergistic effect between the MXene nanosheets and PEDOT:PSS also greatly enhances the stretchability and sensitivity of the sensing devices. These properties enable the nanocomposite to decouple responses between temperature and strain stimuli with an accurate temperature resolution of 0.2 °C and a gauge factor of up to 1933.3 in a working strain range broader than 60%.

Self-Healing Hyper-Cross-Linked Metal-Organic Polyhedra (HCMOPs) Membranes with Antimicrobial Activity and Highly Selective Separation Properties.

Fabrication of hybrid membranes composed of porous materials embedded in polymer matrices is a subject of topical interest. Herein, we introduce a new class of hybrid membranes: hyper-cross-linked metal-organic polyhedra (HCMOPs). These membranes are based upon soluble MOPs that can serve as high-connectivity nodes in hyper-cross-linked polymer networks. HCMOPs spontaneously form macro-scale, defect-free, freestanding membranes, and, thanks to the covalent cross-linking of MOPs, the resulting membranes possess multiple functionalities: strong water permeability; self-healing ability; antimicrobial activity; and better separation and mechanical performance than pristine polyimine membranes. This study introduces a new concept for the design and fabrication of multifunctional membranes and also broadens the applications of MOPs.

New insights into pure zwitterionic hydrogels with high strength and high toughness.

Zwitterionic hydrogels are electrically neutral materials with both cationic and anionic groups that impart excellent anti-fouling properties and ion channel orientations. However, pure zwitterionic hydrogels generally exhibit low strength and toughness. In this study, it has been discovered that polymerizable zwitterionic monomers in aqueous solution exhibit a unique liquid-liquid phase separation phenomenon at a high monomer concentration of ≥50 wt%, resulting in pure and commercial zwitterionic hydrogels with high compressive strength (6.5 MPa) and high toughness (2.12 kJ m-2). This phase separation and the corresponding aggregations might be caused by strong dipole-dipole interactions among residual zwitterionic monomers under the lack of free-water condition. The synergistic effect of liquid-liquid phase separation and polymer entanglement enhances the mechanical strength, toughness, self-recovery, and anti-freezing properties of pure polyzwitterionic hydrogels. Moreover, the high fracture energy of highly elongated yet tough polyzwitterionic hydrogels facilitates the development of high crack propagation resistance, which supports an expanded role in tissue engineering, soft flexible devices, and electronics applications with improved durability. A wide range of applications for the proposed polyzwitterionic hydrogels is demonstrated by the development and testing of a strain sensor and a triboelectric nanogenerator device. Our findings provide novel insights into the network structure of pure polyzwitterionic hydrogels.

Highly sensitive volatile organic compounds monitoring enabling by silver-nanowire@metal-organic frameworks core-shell heterostructure.

Metal-organic frameworks (MOFs) hold great promise as advanced chemical sensing materials due to their high surface area and tunable surface chemistry. However, due to the inherent conductivity, building a highly sensitive MOFs-based gas sensor for real-time monitoring hazardous gas operated at room temperature (RT) is still a huge challenge. Herein, an in-situ anchoring strategy is proposed to construct a 1D-0D core-shell heterostructure by integrating silver nanowires (AgNWs) with highly conductivity and Zn-MOF with high specific surface area. The incorporation of AgNWs establishes a highly conductive network architecture to facilitate rapid charge transport while preventing the Zn-MOF nanoparticles from agglomeration, ensuring an effective transmission highway for target gas molecules. Meanwhile, the Zn-MOF nanoparticles induce remarkable absorption capacity and contribute high gas response. By strategically amalgamating the inherent distinctive virtues of the individual components and capitalizing on the synergistic benefits arising from the composite, the sensors hinged upon the refined AgNWs@Zn-MOF (A@Z) heterostructure unveiled remarkable response value of 27 to 20 ppm ethanol at RT, accompanied by a low detection limit of 1 ppm. Moreover, the A@Z sensor further showcases superior selectivity and repeatability. This work offers a fresh standpoint for the fabrication of MOF-based heterostructures, fostering advancements in diverse applications.