Precision design of stable genetic circuits carried in highly-insulated E. coli genomic landing pads.

Genetic circuits have many applications, from guiding living therapeutics to ordering process in a bioreactor, but to be useful they have to be genetically stable and not hinder the host. Encoding circuits in the genome reduces burden, but this decreases performance and can interfere with native transcription. We have designed genomic landing pads in Escherichia coli at high-expression sites, flanked by ultrastrong double terminators. DNA payloads >8 kb are targeted to the landing pads using phage integrases. One landing pad is dedicated to carrying a sensor array, and two are used to carry genetic circuits. NOT/NOR gates based on repressors are optimized for the genome and characterized in the landing pads. These data are used, in conjunction with design automation software (Cello 2.0), to design circuits that perform quantitatively as predicted. These circuits require fourfold less RNA polymerase than when carried on a plasmid and are stable for weeks in a recA+ strain without selection. This approach enables the design of synthetic regulatory networks to guide cells in environments or for applications where plasmid use is infeasible.

Programming Escherichia coli to function as a digital display.

Synthetic genetic circuits offer the potential to wield computational control over biology, but their complexity is limited by the accuracy of mathematical models. Here, we present advances that enable the complete encoding of an electronic chip in the DNA carried by Escherichia coli (E. coli). The chip is a binary-coded digit (BCD) to 7-segment decoder, associated with clocks and calculators, to turn on segments to visualize 0-9. Design automation is used to build seven strains, each of which contains a circuit with up to 12 repressors and two activators (totaling 63 regulators and 76,000 bp DNA). The inputs to each circuit represent the digit to be displayed (encoded in binary by four molecules), and output is the segment state, reported as fluorescence. Implementation requires an advanced gate model that captures dynamics, promoter interference, and a measure of total power usage (RNAP flux). This project is an exemplar of design automation pushing engineering beyond that achievable "by hand", essential for realizing the potential of biology.

Numerical Analysis on Natural Convection Heat Transfer in a Single Circular Fin-Tube Heat Exchanger (Part 1): Numerical Method.

In this research, unsteady three-dimensional incompressible Navier-Stokes equations are solved to simulate experiments with the Boussinesq approximation and validate the proposed numerical model for the design of a circular fin-tube heat exchanger. Unsteady time marching is proposed for a time sweeping analysis of various Rayleigh numbers. The accuracy of the natural convection data of a single horizontal circular tube with the proposed numerical method can be guaranteed when the Rayleigh number based on the tube diameter exceeds 400, which is regarded as the limitation of numerical errors due to instability. Moreover, the effective limit for a circular fin-tube heat exchanger is reached when the Rayleigh number based on the fin gap size ( Ra s ) is equal to or exceeds 100. This is because at low Rayleigh numbers, the air gap between the fins is isolated and rarely affected by natural convection of the outer air, where the fluid provides heat resistance. Thus, the fin acts favorably when Ra s exceeds 100.

α-Hemolysin pore formation into a supported phospholipid bilayer using cell-free expression.

Cell-free protein synthesis is becoming a serious alternative to cell-based protein expression. Cell-free systems can deliver large amounts of cytoplasmic recombinant proteins after a few hours of incubation. Recent studies have shown that membrane proteins can be also expressed in cell-free reactions and directly inserted into phospholipid membranes. In this work, we present a quantitative method to study in real time the concurrent cell-free expression and insertion of membrane proteins into phospholipid bilayers. The pore-forming protein α-hemolysin, fused to the reporter protein eGFP, was used as a model of membrane protein. Cell-free expression of the toxin in solution and inside large synthetic phospholipid vesicles was measured by fluorometry and fluorescence microscopy respectively. A quartz crystal microbalance with dissipation was used to characterize the interaction of the protein with a supported phospholipid bilayer. The cell-free reaction was directly incubated onto the bilayer inside the microbalance chamber while the frequency and the dissipation signals were monitored. The presence of pores in the phospholipid bilayer was confirmed by atomic force microscopy. A model is presented which describes the kinetics of adsorption of the expressed protein on the phospholipid bilayer. The combination of cell-free expression, fluorescence microscopy and quartz crystal microbalance-dissipation is a new quantitative approach to study the interaction of membrane proteins with phospholipid bilayers.

Transcriptional Tuning of Mevalonate Pathway Enzymes to Identify the Impact on Limonene Production in Escherichia coli.

Heterologous production of limonene in microorganisms through the mevalonate (MVA) pathway has traditionally imposed metabolic burden and reduced cell fitness, where imbalanced stoichiometries among sequential enzymes result in the accumulation of toxic intermediates. Although prior studies have shown that changes to mRNA stability, RBS strength, and protein homology can be effective strategies for balancing enzyme levels in the MVA pathway, testing different variations of these parameters often requires distinct genetic constructs, which can exponentially increase assembly costs as pathways increase in size. Here, we developed a multi-input transcriptional circuit to regulate the MVA pathway, where four chemical inducers, l-arabinose (Ara), choline chloride (Cho), cuminic acid (Cuma), and isopropyl ß-d-1-thiogalactopyranoside (IPTG), each regulate one of four orthogonal promoters. We tested modular transcriptional regulation of the MVA pathway by placing this circuit in an engineered Escherichia coli "marionette" strain, which enabled systematic and independent tuning of the first three enzymes (AtoB, HMGS, and HMGR) in the MVA pathway. By systematically testing combinations of chemical inducers as inputs, we investigated relationships between the expressions of different MVA pathway submodules, finding that limonene yields are sensitive to the coordinated transcriptional regulation of HMGS and HMGR.

Retraction: Shin, J.-H.; Jeong, C.-W. Zipper Is Necessary for Branching Morphogenesis of the Terminal Cells in the Drosophila melanogaster's Tracheal System. Biology 2021, 10, 729.

The published article [...].

Visualization of a Limonene Synthesis Metabolon Inside Living Bacteria by Hyperspectral SRS Microscopy.

Monitoring biosynthesis activity at single-cell level is key to metabolic engineering but is still difficult to achieve in a label-free manner. Using hyperspectral stimulated Raman scattering imaging in the 670-900 cm-1 region, localized limonene synthesis are visualized inside engineered Escherichia coli. The colocalization of limonene and GFP-fused limonene synthase is confirmed by co-registered stimulated Raman scattering and two-photon fluorescence images. The finding suggests a limonene synthesis metabolon with a polar distribution inside the cells. This finding expands the knowledge of de novo limonene biosynthesis in engineered bacteria and highlights the potential of SRS chemical imaging in metabolic engineering research.

Coarse-grained dynamics of protein synthesis in a cell-free system.

A complete gene expression reaction is reconstituted in a cell-free system comprising the entire endogenous transcription, translation, as well as mRNA and protein degradation machinery of E. coli. In dissecting the major reaction steps, we derive a coarse-grained enzymatic description of biosynthesis and degradation, from which ten relevant rate constants and concentrations are determined. Governed by zeroth-order degradation, protein expression follows a sharp transition from undetectable levels to constant-rate accumulation, without reaching steady state.

Zipper Is Necessary for Branching Morphogenesis of the Terminal Cells in the Drosophila melanogaster's Tracheal System.

Branching morphogenesis and seamless tube formation in Drosophila melanogaster are essential for the development of vascular and tracheal systems, and instructive in studying complex branched structures such as human organs. Zipper is a myosin II's actin-binding heavy chain; hence, it is important for contracting actin, cell proliferation, and cell sheet adhesion for branching of the tracheal system in post-larval development of the D. melanogaster. Nevertheless, the specific role of Zipper in the larva is still in question. This paper intended to investigate the specific role of Zipper in branching morphogenesis and lumenogenesis in early developmental stages. It did so by checking the localization of the protein in the cytoplasm of the terminal cells and also by analyzing the morphology of zipper RNAi loss-of-function mutants in regard to branching and lumen formation in the terminal cells. A rescue experiment of RNAi mutants was also performed to check the sufficiency of Zipper in branching morphogenesis. Confocal imaging showed the localization of Zipper in the cytoplasm of the terminal cells, and respective quantitative analyses demonstrated that zipper RNAi terminal cells develop significantly fewer branches. Such a result hinted that Zipper is required for the regulation of branching in the terminal cells of D. melanogaster. Nevertheless, Zipper is not significantly involved in the formation of seamless tubes. One hypothesis is that Zipper's contractility at the lateral epidermis' leading edge allows cell sheet movement and respective elongation; as a result of such an elongation, further branching may occur in the elongated region of the cell, hence defining branching morphogenesis in the terminal cells of the tracheal system.

Microsecond fingerprint stimulated Raman spectroscopic imaging by ultrafast tuning and spatial-spectral learning.

Label-free vibrational imaging by stimulated Raman scattering (SRS) provides unprecedented insight into real-time chemical distributions. Specifically, SRS in the fingerprint region (400-1800 cm-1) can resolve multiple chemicals in a complex bio-environment. However, due to the intrinsic weak Raman cross-sections and the lack of ultrafast spectral acquisition schemes with high spectral fidelity, SRS in the fingerprint region is not viable for studying living cells or large-scale tissue samples. Here, we report a fingerprint spectroscopic SRS platform that acquires a distortion-free SRS spectrum at 10 cm-1 spectral resolution within 20 µs using a polygon scanner. Meanwhile, we significantly improve the signal-to-noise ratio by employing a spatial-spectral residual learning network, reaching a level comparable to that with 100 times integration. Collectively, our system enables high-speed vibrational spectroscopic imaging of multiple biomolecules in samples ranging from a single live microbe to a tissue slice.

Genetic circuit design automation.

Computation can be performed in living cells by DNA-encoded circuits that process sensory information and control biological functions. Their construction is time-intensive, requiring manual part assembly and balancing of regulator expression. We describe a design environment, Cello, in which a user writes Verilog code that is automatically transformed into a DNA sequence. Algorithms build a circuit diagram, assign and connect gates, and simulate performance. Reliable circuit design requires the insulation of gates from genetic context, so that they function identically when used in different circuits. We used Cello to design 60 circuits forEscherichia coli(880,000 base pairs of DNA), for which each DNA sequence was built as predicted by the software with no additional tuning. Of these, 45 circuits performed correctly in every output state (up to 10 regulators and 55 parts), and across all circuits 92% of the output states functioned as predicted. Design automation simplifies the incorporation of genetic circuits into biotechnology projects that require decision-making, control, sensing, or spatial organization.

Protocols for implementing an Escherichia coli based TX-TL cell-free expression system for synthetic biology.

Ideal cell-free expression systems can theoretically emulate an in vivo cellular environment in a controlled in vitro platform. This is useful for expressing proteins and genetic circuits in a controlled manner as well as for providing a prototyping environment for synthetic biology. To achieve the latter goal, cell-free expression systems that preserve endogenous Escherichia coli transcription-translation mechanisms are able to more accurately reflect in vivo cellular dynamics than those based on T7 RNA polymerase transcription. We describe the preparation and execution of an efficient endogenous E. coli based transcription-translation (TX-TL) cell-free expression system that can produce equivalent amounts of protein as T7-based systems at a 98% cost reduction to similar commercial systems. The preparation of buffers and crude cell extract are described, as well as the execution of a three tube TX-TL reaction. The entire protocol takes five days to prepare and yields enough material for up to 3000 single reactions in one preparation. Once prepared, each reaction takes under 8 hr from setup to data collection and analysis. Mechanisms of regulation and transcription exogenous to E. coli, such as lac/tet repressors and T7 RNA polymerase, can be supplemented. Endogenous properties, such as mRNA and DNA degradation rates, can also be adjusted. The TX-TL cell-free expression system has been demonstrated for large-scale circuit assembly, exploring biological phenomena, and expression of proteins under both T7- and endogenous promoters. Accompanying mathematical models are available. The resulting system has unique applications in synthetic biology as a prototyping environment, or "TX-TL biomolecular breadboard."

An E. coli cell-free expression toolbox: application to synthetic gene circuits and artificial cells.

Cell-free protein synthesis is becoming a powerful technique to construct and to study complex informational processes in vitro. Engineering synthetic gene circuits in a test tube, however, is seriously limited by the transcription repertoire of modern cell-free systems, composed of only a few bacteriophage regulatory elements. Here, we report the construction and the phenomenological characterization of synthetic gene circuits engineered with a cell-free expression toolbox that works with the seven E. coli sigma factors. The E. coli endogenous holoenzyme E(70) is used as the primary transcription machinery. Elementary circuit motifs, such as multiple stage cascades, AND gate and negative feedback loops are constructed with the six other sigma factors, two bacteriophage RNA polymerases, and a set of repressors. The circuit dynamics reveal the importance of the global mRNA turnover rate and of passive competition-induced transcriptional regulation. Cell-free reactions can be carried out over long periods of time with a small-scale dialysis reactor or in phospholipid vesicles, an artificial cell system. This toolbox is a unique platform to study complex transcription/translation-based biochemical systems in vitro.

Genome replication, synthesis, and assembly of the bacteriophage T7 in a single cell-free reaction.

The synthesis of living entities in the laboratory is a standing challenge that calls for innovative approaches. Using a cell-free transcription-translation system as a molecular programming platform, we show that the bacteriophage T7, encoded by a 40 kbp DNA program composed of about 60 genes, can be entirely synthesized from its genomic DNA in a test tube reaction. More than a billion infectious bacteriophages T7 per milliliter of reaction are produced after a few hours of incubation. The replication of the genomic DNA occurs concurrently with phage gene expression, protein synthesis, and viral assembly. The demonstration that genome-sized viral DNA can be expressed in a test tube, recapitulating the entire chain of information processing including the replication of the DNA instructions, opens new possibilities to program and to study complex biochemical systems in vitro.

Assembly of MreB filaments on liposome membranes: a synthetic biology approach.

The physical interaction between the cytoskeleton and the cell membrane is essential in defining the morphology of living organisms. In this study, we use a synthetic approach to polymerize bacterial MreB filaments inside phospholipid vesicles. When the proteins MreB and MreC are expressed inside the liposomes, the MreB cytoskeleton structure develops at the inner membrane. Furthermore, when purified MreB is used inside the liposomes, MreB filaments form a 4-10 µm rigid bundle structure and deform the lipid vesicles in physical contact with the vesicle inner membrane. These results indicate that the fibrillation of MreB filaments can take place either in close proximity of deformable lipid membrane or in the presence of associated protein. Our finding might be relevant for the self-assembly of cytoskeleton filaments toward the construction of artificial cell systems.

Efficient cell-free expression with the endogenous E. Coli RNA polymerase and sigma factor 70.

BACKGROUND: Escherichia coli cell-free expression systems use bacteriophage RNA polymerases, such as T7, to synthesize large amounts of recombinant proteins. These systems are used for many applications in biotechnology, such as proteomics. Recently, informational processes have been reconstituted in vitro with cell-free systems. These synthetic approaches, however, have been seriously limited by a lack of transcription modularity. The current available cell-free systems have been optimized to work with bacteriophage RNA polymerases, which put significant restrictions to engineer processes related to biological information. The development of efficient cell-free systems with broader transcription capabilities is required to study complex informational processes in vitro. RESULTS: In this work, an efficient cell-free expression system that uses the endogenous E. coli RNA polymerase only and sigma factor 70 for transcription was prepared. Approximately 0.75 mg/ml of Firefly luciferase and enhanced green fluorescent protein were produced in batch mode. A plasmid was optimized with different regulatory parts to increase the expression. In addition, a new eGFP was engineered that is more translatable in cell-free systems than the original eGFP. The protein production was characterized with three different adenosine triphosphate (ATP) regeneration systems: creatine phosphate (CP), phosphoenolpyruvate (PEP), and 3-phosphoglyceric acid (3-PGA). The maximum protein production was obtained with 3-PGA. Preparation of the crude extract was streamlined to a simple routine procedure that takes 12 hours including cell culture. CONCLUSIONS: Although it uses the endogenous E. coli transcription machinery, this cell-free system can produce active proteins in quantities comparable to bacteriophage systems. The E. coli transcription provides much more possibilities to engineer informational processes in vitro. Many E. coli promoters/operators specific to sigma factor 70 are available that form a broad library of regulatory parts. In this work, cell-free expression is developed as a toolbox to design and to study synthetic gene circuits in vitro.

Study of messenger RNA inactivation and protein degradation in an Escherichia coli cell-free expression system.

BACKGROUND: A large amount of recombinant proteins can be synthesized in a few hours with Escherichia coli cell-free expression systems based on bacteriophage transcription. These cytoplasmic extracts are used in many applications that require large-scale protein production such as proteomics and high throughput techniques. In recent years, cell-free systems have also been used to engineer complex informational processes. These works, however, have been limited by the current available cell-free systems, which are not well adapted to these types of studies. In particular, no method has been proposed to increase the mRNA inactivation rate and the protein degradation rate in cell-free reactions. The construction of in vitro informational processes with interesting dynamics requires a balance between mRNA and protein synthesis (the source), and mRNA inactivation and protein degradation (the sink). RESULTS: Two quantitative studies are presented to characterize and to increase the global mRNA inactivation rate, and to accelerate the degradation of the synthesized proteins in an E. coli cell-free expression system driven by the endogenous RNA polymerase and sigma factor 70. The E. coli mRNA interferase MazF was used to increase and to adjust the mRNA inactivation rate of the Firefly luciferase (Luc) and of the enhanced green fluorescent protein (eGFP). Peptide tags specific to the endogenous E. coli AAA + proteases were used to induce and to adjust the protein degradation rate of eGFP. Messenger RNA inactivation rate, protein degradation rate, maturation time of Luc and eGFP were measured. CONCLUSIONS: The global mRNA turnover and the protein degradation rate can be accelerated and tuned in a biologically relevant range in a cell-free reaction with quantitative procedures easy to implement. These features broaden the capabilities of cell-free systems with a better control of gene expression. This cell-free extract could find some applications in new research areas such as in vitro synthetic biology and systems biology where engineering informational processes requires a quantitative control of mRNA inactivation and protein degradation.