The ISMRM Open Science Initiative for Perfusion Imaging (OSIPI): Results from the OSIPI-Dynamic Contrast-Enhanced challenge.

PURPOSE: K trans $$ {K}^{\mathrm{trans}} $$ has often been proposed as a quantitative imaging biomarker for diagnosis, prognosis, and treatment response assessment for various tumors. None of the many software tools for K trans $$ {K}^{\mathrm{trans}} $$ quantification are standardized. The ISMRM Open Science Initiative for Perfusion Imaging-Dynamic Contrast-Enhanced (OSIPI-DCE) challenge was designed to benchmark methods to better help the efforts to standardize K trans $$ {K}^{\mathrm{trans}} $$ measurement. METHODS: A framework was created to evaluate K trans $$ {K}^{\mathrm{trans}} $$ values produced by DCE-MRI analysis pipelines to enable benchmarking. The perfusion MRI community was invited to apply their pipelines for K trans $$ {K}^{\mathrm{trans}} $$ quantification in glioblastoma from clinical and synthetic patients. Submissions were required to include the entrants' K trans $$ {K}^{\mathrm{trans}} $$ values, the applied software, and a standard operating procedure. These were evaluated using the proposed OSIP I gold $$ \mathrm{OSIP}{\mathrm{I}}_{\mathrm{gold}} $$ score defined with accuracy, repeatability, and reproducibility components. RESULTS: Across the 10 received submissions, the OSIP I gold $$ \mathrm{OSIP}{\mathrm{I}}_{\mathrm{gold}} $$ score ranged from 28% to 78% with a 59% median. The accuracy, repeatability, and reproducibility scores ranged from 0.54 to 0.92, 0.64 to 0.86, and 0.65 to 1.00, respectively (0-1 = lowest-highest). Manual arterial input function selection markedly affected the reproducibility and showed greater variability in K trans $$ {K}^{\mathrm{trans}} $$ analysis than automated methods. Furthermore, provision of a detailed standard operating procedure was critical for higher reproducibility. CONCLUSIONS: This study reports results from the OSIPI-DCE challenge and highlights the high inter-software variability within K trans $$ {K}^{\mathrm{trans}} $$ estimation, providing a framework for ongoing benchmarking against the scores presented. Through this challenge, the participating teams were ranked based on the performance of their software tools in the particular setting of this challenge. In a real-world clinical setting, many of these tools may perform differently with different benchmarking methodology.

Cemented vs. press-fit humeral stems: a matched cohort analysis at a mean follow-up of 10 years.

BACKGROUND: Although cementation of humeral stems has long been considered the gold standard for anatomic shoulder arthroplasty (aTSA), cementless, or press-fit, fixation offers a relatively cheaper and less demanding alternative, particularly in the setting of a revision procedure. However, this approach has been accompanied by concerns of implant loosening and high rates of radiolucency. In the present study, we performed a propensity-matched comparison of clinical and patient-reported outcomes between cemented and cementless fixation techniques for aTSA. We hypothesized that cemented fixation of the humeral component would have significantly better implant survival while providing comparable functional outcomes at final follow-up. METHODS: This study was a retrospective comparison of 50 shoulders undergoing aTSA: 25 using cemented humeral fixation vs. 25 using press-fit humeral fixation. Patients in the 2 groups were propensity matched according to age, sex, and preoperative American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score. Primary outcome measures included range of motion (ROM) (forward elevation, external rotation, internal rotation), patient-reported outcomes (ASES, Simple Shoulder Test [SST], visual analog scale [VAS]), and implant survival. RESULTS: At baseline, the 2 fixation groups were similar in regard to age, sex, body mass index, preoperative ASES score, and surgical indication. Mean follow-up was 11.7 ± 4.95 years in the cemented cohort and 9.13 ± 3.77 years in the press-fit cohort (P = .045). Both groups demonstrated significant improvements postoperatively in all included ROM and patient-reported outcomes. However, press-fit patients reported significantly better VAS, ASES, and SST scores. Mean VAS pain score was 1.1 ± 1.8 in press-fit patients and 3.2 ± 3.0 in cemented patients (P = .005). The mean ASES score was 87.7 ± 12.4 in press-fit patients and 69.5 ± 22.7 in cemented patients (P = .002). Lastly, the mean SST score was 9.8 ± 3.1 in press-fit patients and 7.7 ± 3.7 in cemented patients (P = .040). Both fixation techniques provided lasting implant survivorship with only a single revision operation in each of the cohorts. CONCLUSION: Herein, we provide a propensity-matched, long-term comparison of patients receiving anatomic shoulder arthroplasty stratified according to humeral stem fixation technique. The results of this analysis illustrate that both types of humeral fixation techniques yield durable and significant improvements in shoulder function with similar rates of survival at 10 years of follow-up.

Time-dependent diffusivity and kurtosis in phantoms and patients with head and neck cancer.

PURPOSE: To assess the reliability of measuring diffusivity, diffusional kurtosis, and cellular-interstitial water exchange time with long diffusion times (100-800 ms) using stimulated-echo DWI. METHODS: Time-dependent diffusion MRI was tested on two well-established diffusion phantoms and in 5 patients with head and neck cancer. Measurements were conducted using an in-house diffusion-weighted STEAM-EPI pulse sequence with multiple diffusion times at a fixed TE on three scanners. We used the weighted linear least-squares fit method to estimate time-dependent diffusivity, D ( t ) $$ D(t) $$ , and diffusional kurtosis, K ( t ) $$ K(t) $$ . Additionally, the Kärger model was used to estimate cellular-interstitial water exchange time ( τ ex $$ {\tau}_{ex} $$ ) from K ( t ) $$ K(t) $$ . RESULTS: Diffusivity measured by time-dependent STEAM-EPI measurements and commercial SE-EPI showed comparable results with R2 above 0.98 and overall 5.4 ± 3.0% deviation across diffusion times. Diffusional kurtosis phantom data showed expected patterns: constant D $$ D $$ and K $$ K $$  = 0 for negative controls and slow varying D $$ D $$ and K $$ K $$ for samples made of nanoscopic vesicles. Time-dependent diffusion MRI in patients with head and neck cancer found that the Kärger model could be considered valid in 72% ± 23% of the voxels in the metastatic lymph nodes. The median cellular-interstitial water exchange time estimated for lesions was between 58.5 ms and 70.6 ms. CONCLUSIONS: Based on two well-established diffusion phantoms, we found that time-dependent diffusion MRI measurements can provide stable diffusion and kurtosis values over a wide range of diffusion times and across multiple MRI systems. Moreover, estimation of cellular-interstitial water exchange time can be achieved using the Kärger model for the metastatic lymph nodes in patients with head and neck cancer.

Multi-Site Concordance of Diffusion-Weighted Imaging Quantification for Assessing Prostate Cancer Aggressiveness.

BACKGROUND: Diffusion-weighted imaging (DWI) is commonly used to detect prostate cancer, and a major clinical challenge is differentiating aggressive from indolent disease. PURPOSE: To compare 14 site-specific parametric fitting implementations applied to the same dataset of whole-mount pathologically validated DWI to test the hypothesis that cancer differentiation varies with different fitting algorithms. STUDY TYPE: Prospective. POPULATION: Thirty-three patients prospectively imaged prior to prostatectomy. FIELD STRENGTH/SEQUENCE: 3 T, field-of-view optimized and constrained undistorted single-shot DWI sequence. ASSESSMENT: Datasets, including a noise-free digital reference object (DRO), were distributed to the 14 teams, where locally implemented DWI parameter maps were calculated, including mono-exponential apparent diffusion coefficient (MEADC), kurtosis (K), diffusion kurtosis (DK), bi-exponential diffusion (BID), pseudo-diffusion (BID*), and perfusion fraction (F). The resulting parametric maps were centrally analyzed, where differentiation of benign from cancerous tissue was compared between DWI parameters and the fitting algorithms with a receiver operating characteristic area under the curve (ROC AUC). STATISTICAL TEST: Levene's test, P < 0.05 corrected for multiple comparisons was considered statistically significant. RESULTS: The DRO results indicated minimal discordance between sites. Comparison across sites indicated that K, DK, and MEADC had significantly higher prostate cancer detection capability (AUC range = 0.72-0.76, 0.76-0.81, and 0.76-0.80 respectively) as compared to bi-exponential parameters (BID, BID*, F) which had lower AUC and greater between site variation (AUC range = 0.53-0.80, 0.51-0.81, and 0.52-0.80 respectively). Post-processing parameters also affected the resulting AUC, moving from, for example, 0.75 to 0.87 for MEADC varying cluster size. DATA CONCLUSION: We found that conventional diffusion models had consistent performance at differentiating prostate cancer from benign tissue. Our results also indicated that post-processing decisions on DWI data can affect sensitivity and specificity when applied to radiological-pathological studies in prostate cancer. LEVEL OF EVIDENCE: 1 TECHNICAL EFFICACY: Stage 3.

MRI of the Pancreas.

MRI has played a critical role in the evaluation of patients with pancreatic pathologies, from screening of patients at high risk for pancreatic cancer to the evaluation of pancreatic cysts and indeterminate pancreatic lesions. The high mortality associated with pancreatic adenocarcinomas has spurred much interest in developing effective screening tools, with MRI using magnetic resonance cholangiopancreatography (MRCP) playing a central role in the hopes of identifying cancers at earlier stages amenable to curative resection. Ongoing efforts to improve the resolution and robustness of imaging of the pancreas using MRI may thus one day reduce the mortality of this deadly disease. However, the increasing use of cross-sectional imaging has also generated a concomitant clinical conundrum: How to manage incidental pancreatic cystic lesions that are found in over a quarter of patients who undergo MRCP. Efforts to improve the specificity of MRCP for patients with pancreatic cysts and with indeterminate pancreatic masses may be achieved with continued technical advances in MRI, including diffusion-weighted and T1 -weighted dynamic contrast-enhanced MRI. However, developments in quantitative MRI of the pancreas remain challenging, due to the small size of the pancreas and its upper abdominal location, adjacent to bowel and below the diaphragm. Further research is needed to improve MRI of the pancreas as a clinical tool, to positively affect the lives of patients with pancreatic abnormalities. This review focuses on various MR techniques such as MRCP, quantitative imaging, and dynamic contrast-enhanced imaging and their clinical applicability in the imaging of the pancreas, with an emphasis on pancreatic malignant and premalignant lesions. Level of Evidence 5 Technical Efficacy Stage 3 J. MAGN. RESON. IMAGING 2021;53:347-359.

Ultrafast dynamic contrast-enhanced breast MRI may generate prognostic imaging markers of breast cancer.

BACKGROUND: Ultrafast dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI)-derived kinetic parameters have demonstrated at least equivalent accuracy to standard DCE-MRI in differentiating malignant from benign breast lesions. However, it is unclear if they have any efficacy as prognostic imaging markers. The aim of this study was to investigate the relationship between ultrafast DCE-MRI-derived kinetic parameters and breast cancer characteristics. METHODS: Consecutive breast MRI examinations between February 2017 and January 2018 were retrospectively reviewed to determine those examinations that meet the following inclusion criteria: (1) BI-RADS 4-6 MRI performed on a 3T scanner with a 16-channel breast coil and (2) a hybrid clinical protocol with 15 phases of ultrafast DCE-MRI (temporal resolution of 2.7-4.6 s) followed by early and delayed phases of standard DCE-MRI. The study included 125 examinations with 142 biopsy-proven breast cancer lesions. Ultrafast DCE-MRI-derived kinetic parameters (maximum slope [MS] and bolus arrival time [BAT]) were calculated for the entire volume of each lesion. Comparisons of these parameters between different cancer characteristics were made using generalized estimating equations, accounting for the presence of multiple lesions per patient. All comparisons were exploratory and adjustment for multiple comparisons was not performed; P values < 0.05 were considered statistically significant. RESULTS: Significantly larger MS and shorter BAT were observed for invasive carcinoma than ductal carcinoma in situ (DCIS) (P < 0.001 and P = 0.008, respectively). Significantly shorter BAT was observed for invasive carcinomas with more aggressive characteristics than those with less aggressive characteristics: grade 3 vs. grades 1-2 (P = 0.025), invasive ductal carcinoma vs. invasive lobular carcinoma (P = 0.002), and triple negative or HER2 type vs. luminal type (P < 0.001). CONCLUSIONS: Ultrafast DCE-MRI-derived parameters showed a strong relationship with some breast cancer characteristics, especially histopathology and molecular subtype.

Dynamic contrast-enhanced MRI model selection for predicting tumor aggressiveness in papillary thyroid cancers.

The purpose of this study was to identify the optimal tracer kinetic model from T1 -weighted dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) data and evaluate whether parameters estimated from the optimal model predict tumor aggressiveness determined from histopathology in patients with papillary thyroid carcinoma (PTC) prior to surgery. In this prospective study, 18 PTC patients underwent pretreatment DCE-MRI on a 3 T MR scanner prior to thyroidectomy. This study was approved by the institutional review board and informed consent was obtained from all patients. The two-compartment exchange model, compartmental tissue uptake model, extended Tofts model (ETM) and standard Tofts model were compared on a voxel-wise basis to determine the optimal model using the corrected Akaike information criterion (AICc) for PTC. The optimal model is the one with the lowest AICc. Statistical analysis included paired and unpaired t-tests and a one-way analysis of variance. Bonferroni correction was applied for multiple comparisons. Receiver operating characteristic (ROC) curves were generated from the optimal model parameters to differentiate PTC with and without aggressive features, and AUCs were compared. ETM performed best with the lowest AICc and the highest Akaike weight (0.44) among the four models. ETM was preferred in 44% of all 3419 voxels. The ETM estimates of Ktrans in PTCs with the aggressive feature extrathyroidal extension (ETE) were significantly higher than those without ETE (0.78 ± 0.29 vs. 0.34 ± 0.18 min-1 , P = 0.005). From ROC analysis, cut-off values of Ktrans , ve and vp , which discriminated between PTCs with and without ETE, were determined at 0.45 min-1 , 0.28 and 0.014 respectively. The sensitivities and specificities were 86 and 82% (Ktrans ), 71 and 82% (ve ), and 86 and 55% (vp ), respectively. Their respective AUCs were 0.90, 0.71 and 0.71. We conclude that ETM Ktrans has shown potential to classify tumors with and without aggressive ETE in patients with PTC.

Differentiation between subcentimeter carcinomas and benign lesions using kinetic parameters derived from ultrafast dynamic contrast-enhanced breast MRI.

OBJECTIVES: This study aims to evaluate ultrafast DCE-MRI-derived kinetic parameters that reflect contrast agent inflow effects in differentiating between subcentimeter BI-RADS 4-5 breast carcinomas and benign lesions. METHODS: We retrospectively reviewed consecutive 3-T MRI performed from February to October 2017, during which ultrafast DCE-MRI was performed as part of a hybrid clinical protocol with conventional DCE-MRI. In total, 301 female patients with 369 biopsy-proven breast lesions were included. Ultrafast DCE-MRI was acquired continuously over approximately 60 s (temporal resolution, 2.7-7.1 s/phase) starting simultaneously with the start of contrast injection. Four ultrafast DCE-MRI-derived kinetic parameters (maximum slope [MS], contrast enhancement ratio [CER], bolus arrival time [BAT], and initial area under gadolinium contrast agent concentration [IAUGC]) and one conventional DCE-MRI-derived kinetic parameter (signal enhancement ratio [SER]) were calculated for each lesion. Wilcoxon rank sum test or Fisher's exact test was performed to compare kinetic parameters, volume, diameter, age, and BI-RADS morphological descriptors between subcentimeter carcinomas and benign lesions. Univariate/multivariate logistic regression analyses were performed to determine predictive parameters for subcentimeter carcinomas. RESULTS: In total, 125 lesions (26 carcinomas and 99 benign lesions) were identified as BI-RADS 4-5 subcentimeter lesions. Subcentimeter carcinomas demonstrated significantly larger MS and SER and shorter BAT than benign lesions (p = 0.0117, 0.0046, and 0.0102, respectively). MS, BAT, and age were determined as significantly predictive for subcentimeter carcinoma (p = 0.0208, 0.0023, and < 0.0001, respectively). CONCLUSIONS: Ultrafast DCE-MRI-derived kinetic parameters may be useful in differentiating subcentimeter BI-RADS 4 and 5 carcinomas from benign lesions. KEY POINTS: • Ultrafast DCE-MRI can generate kinetic parameters, effectively differentiating breast carcinomas from benign lesions. • Subcentimeter carcinomas demonstrated significantly larger maximum slope and shorter bolus arrival time than benign lesions. • Maximum slope and bolus arrival time contribute to better management of suspicious subcentimeter breast lesions.

The effect of patient-reported metal allergies on the outcomes of shoulder arthroplasty.

BACKGROUND: Although literature exists regarding hip and knee arthroplasty outcomes in patients with skin allergy to metals, there is minimal information about skin allergy implications on shoulder arthroplasty outcomes. The purpose of this study was to determine the results, complications, and failure rate among patients with a self-reported metal allergy undergoing shoulder arthroplasty. METHODS: Fifty-two shoulder arthroplasties were performed at our Institution in 43 patients with self-reported metal allergies. Forty primary and 12 revision shoulder arthroplasties were performed using anatomic (30) and reverse (22) components. Retrospective chart review was performed to determine metal allergy history, implant composition, pain, motion, and complications. Radiographs were reviewed to determine mechanical failure rates. Average follow-up time was 65 months. RESULTS: Allergies reported included nickel (37), cobalt chrome (4), copper (2), zinc (1), titanium (1), gold (1), and nonspecific metal allergy (8); 8 patients reported multiple metal allergies. All components implanted in patients with nickel allergies contained nickel. At most recent follow-up, pain was rated as none or mild in 88% of shoulders. Active elevation improved from 80° to 141° and external rotation from 24° to 52°. Two revisions were performed for glenoid loosening (3.8%); both were revision cases with substantial glenoid bone loss. One patient with mild pain had a radiographically loose glenoid component 12 years after anatomic shoulder arthroplasty. CONCLUSION: Results from this study suggest that shoulder arthroplasty in patients with self-reported metal allergy provides satisfactory pain relief and improved range of motion with low revision rates.

Optimal mass transport kinetic modeling for head and neck DCE-MRI: Initial analysis.

PURPOSE: Current state-of-the-art models for estimating the pharmacokinetic parameters do not account for intervoxel movement of the contrast agent (CA). We introduce an optimal mass transport (OMT) formulation that naturally handles intervoxel CA movement and distinguishes between advective and diffusive flows. METHOD: Ten patients with head and neck squamous cell carcinoma (HNSCC) were enrolled in the study between June 2014 and October 2015 and underwent DCE MRI imaging prior to beginning treatment. The CA tissue concentration information was taken as the input in the data-driven OMT model. The OMT approach was tested on HNSCC DCE data that provides quantitative information for forward flux ( ΦF ) and backward flux ( ΦB ). OMT-derived ΦF was compared with the volume transfer constant for CA, Ktrans , derived from the Extended Tofts Model (ETM). RESULTS: The OMT-derived flows showed a consistent jump in the CA diffusive behavior across the images in accordance with the known CA dynamics. The mean forward flux was 0.0082 ± 0.0091 ( min-1 ) whereas the mean advective component was 0.0052 ± 0.0086 ( min-1 ) in the HNSCC patients. The diffusive percentages in forward and backward flux ranged from 8.67% to 18.76% and 12.76% to 30.36%, respectively. The OMT model accounts for intervoxel CA movement and results show that the forward flux ( ΦF ) is comparable with the ETM-derived Ktrans . CONCLUSIONS: This is a novel data-driven study based on optimal mass transport principles applied to patient DCE imaging to analyze CA flow in HNSCC.

Quantitative imaging biomarkers alliance (QIBA) recommendations for improved precision of DWI and DCE-MRI derived biomarkers in multicenter oncology trials.

Physiological properties of tumors can be measured both in vivo and noninvasively by diffusion-weighted imaging and dynamic contrast-enhanced magnetic resonance imaging. Although these techniques have been used for more than two decades to study tumor diffusion, perfusion, and/or permeability, the methods and studies on how to reduce measurement error and bias in the derived imaging metrics is still lacking in the literature. This is of paramount importance because the objective is to translate these quantitative imaging biomarkers (QIBs) into clinical trials, and ultimately in clinical practice. Standardization of the image acquisition using appropriate phantoms is the first step from a technical performance standpoint. The next step is to assess whether the imaging metrics have clinical value and meet the requirements for being a QIB as defined by the Radiological Society of North America's Quantitative Imaging Biomarkers Alliance (QIBA). The goal and mission of QIBA and the National Cancer Institute Quantitative Imaging Network (QIN) initiatives are to provide technical performance standards (QIBA profiles) and QIN tools for producing reliable QIBs for use in the clinical imaging community. Some of QIBA's development of quantitative diffusion-weighted imaging and dynamic contrast-enhanced QIB profiles has been hampered by the lack of literature for repeatability and reproducibility of the derived QIBs. The available research on this topic is scant and is not in sync with improvements or upgrades in MRI technology over the years. This review focuses on the need for QIBs in oncology applications and emphasizes the importance of the assessment of their reproducibility and repeatability. Level of Evidence: 5 Technical Efficacy Stage: 1 J. Magn. Reson. Imaging 2019;49:e101-e121.

Recommendations towards standards for quantitative MRI (qMRI) and outstanding needs.

LEVEL OF EVIDENCE: 5 Technical Efficacy: Stage 5 J. Magn. Reson. Imaging 2019.

Pilot study of rapid MR pancreas screening for patients with BRCA mutation.

PURPOSE: To develop and optimize a rapid magnetic resonance imaging (MRI) screening protocol for pancreatic cancer to be performed in conjunction with breast MRI screening in breast cancer susceptibility gene (BRCA)-positive individuals. METHODS: An IRB-approved prospective study was conducted. The rapid screening pancreatic MR protocol was designed to be less than 10 min to be performed after a standard breast MRI protocol. Protocol consisted of coronal NT T2 SSFSE, axial NT T2 SSFSE and axial NT rFOV FOCUS DWI, and axial T1. Images were acquired with the patient in the same prone position of breast MRI using the built-in body coil. Image quality was qualitatively assessed by two radiologists with 12 and 13 years of MRI experience, respectively. The imaging protocol was modified until an endpoint of five consecutive patients with high-quality diagnostic images were achieved. Signal-to-noise ratio and contrast-to-noise ratio were assessed. RESULTS: The rapid pancreas MR protocol was successfully completed in all patients. Diagnostic image quality was achieved for all patients. Excellent image quality was achieved for low b values; however, image quality at higher b values was more variable. In one patient, a pancreatic neuroendocrine tumor was found and the patient was treated surgically. In four patients, small pancreatic cystic lesions were detected. In one subject, a hepatic mass was identified and confirmed as adenoma by liver MRI. CONCLUSION: Rapid MR protocol for pancreatic cancer screening is feasible and has the potential to play a role in screening BRCA patients undergoing breast MRI. KEY POINT: • Develop and optimize a rapid magnetic resonance imaging (MRI) screening protocol for pancreatic cancer to be performed in conjunction with breast MRI screening in BRCA mutation positive individuals.

Stem Length and Neck Resection on Fixation Strength of Press-Fit Radial Head Prosthesis: An In Vitro Model.

PURPOSE: Various radial head prosthesis designs are currently in use. Few studies compare different prosthetic designs. We hypothesized that increasing a cementless implant stem's length would reduce stem-bone micromotion, with both short and long neck cuts. We also hypothesized that a minimum stem length might be required for the initial fixation strength of a press-fit implant. METHODS: In 16 fresh-frozen cadaveric elbows (8 pairs), the radial head and neck were cut either 10 or 21 mm below the top of the head. Modular cementless stems were inserted and sequentially lengthened in 5-mm increments. Micromotion under eccentric loading was tested after each incremental change. RESULTS: Incremental lengthening of the prosthetic stem and the amount of neck resection (10-mm cut vs 21-mm cut) both had a significant effect on micromotion. After a 10-mm radial head-neck resection, we observed a significant decrease in micromotion with stem lengths of 25 mm or greater, whereas with 21 mm of neck resection there was no further reduction in micromotion with increased stem length. These differences can be explained, at least in part, by the concept of the cantilever quotient: the ratio of the head-neck length outside the bone to the total length of the implant. CONCLUSIONS: The length of the stem affects the initial stability of press-fit radial head prostheses when the level of head and neck resection is at the minimum (ie, 10 mm) for currently available prosthetic designs. At this resection level, stems 25 mm or greater had significantly higher initial stability, but all stem lengths tested had mean micromotion values within the threshold for bone ingrowth. CLINICAL RELEVANCE: The length of a radial head prosthetic stem affects the initial stability of press-fit radial head prostheses when the level of head and neck resection is at the minimum (ie, 10 mm) for currently available prosthetic designs.

Intraobserver and interobserver reliability of the modified Walch classification using radiographs and computed tomography.

BACKGROUND: The Walch classification was introduced to classify glenoid morphology in primary glenohumeral osteoarthritis. A modified Walch classification was recently proposed, with 2 additional categories, B3 (monoconcave glenoid with posterior bone loss leading to retroversion > 15° or subluxation > 70%) and D (excessive anterior subluxation), as well as a more precise definition of subtypes A2 and C. The purpose of this study was to evaluate the intraobserver and interobserver agreement of the modified Walch classification system using both plain radiographs and computed tomography (CT). METHODS: Three fellowship-trained shoulder surgeons blindly and independently evaluated radiographs and CT scans of 100 consecutive shoulders (98 patients) with primary glenohumeral osteoarthritis and classified all shoulders according to the modified Walch classification in 4 separate sessions, each 4 weeks apart. Statistical analysis with the κ coefficient was used to evaluate reliability. RESULTS: The first reading by the most senior observer on the basis of CT scans was used as the gold standard (distribution: A1, 18; A2, 12; B1, 20; B2, 25; B3, 22; C, 1; and D, 2). The average intraobserver agreement for radiographs and CT scans was 0.73 (substantial; 0.72, 0.74, and 0.72) and 0.73 (substantial; 0.77, 0.69, and 0.72), respectively. The average interobserver agreement was 0.55 (moderate; 0.61, 0.51, and 0.53) for radiographs and 0.52 (moderate; 0.63, 0.50, and 0.43) for CT scans. CONCLUSION: Intraobserver agreement of the modified Walch classification was substantial both for axillary radiographs and for CT scans. Interobserver agreement was fair. Although the modified Walch classification represents an improvement over the original classification, automated computer-based analysis of CT scans may be needed to further improve the value of this classification.

Pretreatment dynamic contrast-enhanced MRI biomarkers correlate with progression-free survival in primary central nervous system lymphoma.

PURPOSE: Prediction of clinical outcomes in patients with primary central nervous system lymphoma (PCNSL) is important for optimization of treatment planning. Quantitative imaging biomarkers for PCNSL have not yet been established. This study evaluated the prognostic value of pretreatment dynamic contrast-enhanced MRI and diffusion-weighted imaging for progression-free survival (PFS) in patients with PCNSL. METHODS: Pretreatment dynamic contrast-enhanced MRI and diffusion-weighted imaging were retrospectively analyzed in 18 immunocompetent patients with PCNSL. Volumes of interest encompassing the tumors were assessed for measurements of blood plasma volume (Vp), volume transfer constant (Ktrans), and apparent diffusion coefficient. Patients were divided into short and long PFS groups based on median PFS. Imaging and clinical variables were correlated with PFS. RESULTS: Median PFS was 19.6 months. Lower Vpmean and Ktransmean values increased risk for rapid progression (< 19.6 months). Receiver operating characteristic curve analysis demonstrated an optimal Vpmean cutoff value of 2.29 (area under the curve [AUC] = 0.74, sensitivity and specificity = 0.78, p = 0.023) for separating patients with short and long PFS. The optimal Ktransmean cutoff was 0.08 (AUC = 0.74, sensitivity = 0.67, specificity = 0.78, p = 0.025). Kaplan-Meier survival analysis with log-rank test demonstrated significantly (p = 0.015) increased risk of rapid progression for patients with Vpmean < 2.29. Vpmean was significantly (p = 0.03) associated with PFS on univariate Cox analysis. Apparent diffusion coefficient values and clinical factors did not influence PFS. CONCLUSIONS: Pretreatment Vp and Ktrans derived from dynamic contrast-enhanced MRI may be novel prognostic quantitative imaging biomarkers of progression-free survival in patients with PCNSL. These data should be prospectively validated in larger patient cohorts.

Management of Failed Rotator Cuff Repair in Young Patients.

Management of failed rotator cuff repair may be very difficult, especially in young patients. Various nonmodifiable and modifiable patient factors, including age, tendon quality, rotator cuff tear characteristics, acute or chronic rotator cuff tear, bone quality, tobacco use, and medications, affect rotator cuff repair healing. Surgical variables, such as the technique, timing, tension on the repair, the biomechanical construct, and fixation, as well as the postoperative rehabilitation strategy also affect rotator cuff repair healing. Variable outcomes have been reported in patients who undergo revision rotator cuff repair; however, a systematic surgical approach may increase the likelihood of a successful outcome. Numerous cellular and mechanical biologic augments, including platelet-rich plasma, platelet-rich fibrin matrix, mesenchymal stem cells, and acellular dermal matrix grafts, have been used in rotator cuff repair; however, conflicting or inconclusive outcomes have been reported in patients who undergo revision rotator cuff repair with the use of these augments. A variety of tendon transfer options, including latissimus dorsi, teres major, lower trapezius, pectoralis minor, pectoralis major, combined pectoralis major and latissimus dorsi, and combined latissimus dorsi and teres major, are available for the management of massive irreparable rotator cuff tears. Ultimately, the optimization of surgical techniques and the use of appropriate biologic/tendon transfer techniques, if indicated, is the best method for the management of failed rotator cuff repair.

The Posterior Bundle's Effect on Posteromedial Elbow Instability After a Transverse Coronoid Fracture: A Biomechanical Study.

PURPOSE: There has been increased interest in the role of the posterior bundle of the medial collateral ligament (pMUCL) in the elbow, particularly its effects on posteromedial rotatory stability. The ligament's effect in the context of an unfixable coronoid fracture has not been the focus of any study. The purposes of this biomechanical study were to evaluate the stabilizing effect of the pMUCL with a transverse coronoid fracture and to assess the effect of graft reconstruction of the ligament. METHODS: We simulated a varus and internal rotatory subluxation in 7 cadaveric elbows at 30°, 60°, and 90° elbow flexion. The amount of ulnar rotation and medial ulnohumeral joint gapping were assessed in the intact elbow after we created a transverse coronoid injury, after we divided the pMUCL, and finally, after we performed a graft reconstruction of the pMUCL. RESULTS: At all angles tested, some stability was lost after cutting the pMUCL once the coronoid had been injured, because mean proximal ulnohumeral joint gapping increased afterward by 2.1, 2.2, and 1.3 mm at 90°, 60°, and 30°, respectively. Ulnar internal rotation significantly increased after pMUCL transection at 90°. At 60° and 30° elbow flexion, ulnar rotation increased after resection of the coronoid but not after pMUCL resection. CONCLUSIONS: An uninjured pMUCL stabilizes against varus internal rotatory instability in the setting of a transverse coronoid fracture at higher flexion angles. Further research is needed to optimize graft reconstruction of the pMUCL. CLINICAL RELEVANCE: The pMUCL is an important secondary stabilizer against posteromedial instability in the coronoid-deficient elbow. In the setting of an unfixable coronoid fracture, the surgeon should examine for posteromedial instability and consider addressing the pMUCL surgically.

Validation of a Simple Overlay Device to Assess Radial Head Implant Length.

PURPOSE: A simple overlay device (SOD) was developed to measure radial head implant length. The purpose of this study was to determine the accuracy and reliability of this device for measuring experimental radial head implant length. METHODS: Five fresh frozen cadavers were implanted with sequentially longer implants, adjusted by neck length (0, 2, 4, and 8 mm). Fluoroscopic images were obtained in 4 forearm positions: anteroposterior in supination in full extension, anteroposterior in pronation in full extension, supinated in 45° of flexion, and neutral in 45° of flexion. The SOD measurements (made by 2 observers) were compared with the native original radial head (control) to assess implant length. In addition, gapping of the ulnohumeral joint space was measured for comparison purposes. RESULTS: The measured radial head and neck lengths for the specimens were 33, 39, 31, 34, and 42 mm. The difference between the actual radial head and neck lengths and those measured with the SOD template averaged less than 2 mm for all 4 collar sizes, except in 1 measurement in which the bicipital tuberosity could not be visualized. The median intraclass correlation coefficients for observer 1 compared with the SOD were 0.94 to 0.99. The median intraclass correlation coefficients between observers were 0.88 to 0.95. For both observers, elbow position, collar height, and the 2 variables combined did not significantly affect the SOD values. The other method that was evaluated, that of measurement of the ulnohumeral joint space, had higher interobserver variability versus the SOD, and allowed detection of lengthening of over 4 mm. CONCLUSIONS: The SOD is a reliable method for simply assessing radial head length with radiographs and can accurately detect 2 mm or more of proximal radial lengthening. CLINICAL RELEVANCE: The SOD is a simple and accurate method that can help to optimize radial head sizing.

Anthropometric Study of the Radiocapitellar Joint.

PURPOSE: There is scant knowledge about the relationship between the size of the radial head and the size of the capitellum. Also, no data exist comparing the size of the capitellum between the left and the right elbow. METHODS: Eight pairs of elbows and 12 single elbows from fresh-frozen cadavers were obtained for this study. The vertical height and anterior width of the capitellum were measured with digital calipers. Four different measurements were performed at the radial head: longest outer diameter, shortest outer diameter, the long dish diameter, and short dish diameter. The Pearson intrarater intraclass correlation coefficients were obtained for all measurements. RESULTS: For the paired elbows, the correlations ranged between 0.95 and 0.96 for the capitellar dimensions and 0.77 and 0.98 for the radial head dimensions. The correlations between the long outer diameter of the radial head with the vertical height and the anterior width of the capitellum were 0.8 and 0.9, respectively. CONCLUSIONS: There is a high correlation between the long outer diameter of the radial head and the vertical height of the capitellum as well its anterior width. There is also a high correlation between the left and the right elbow. CLINICAL RELEVANCE: These findings are relevant to radiocapitellar arthroplasty and may be useful for radiocapitellar prosthetic design as well as in the preoperative planning of cases in which the radial head and/or the capitellum is destroyed.