Stapler Strategies for Upcycling Mixed Plastics.

Mechanical recycling is one of the simplest and most economical strategies to address ever-increasing plastic pollution, but it cannot be applied to immiscible mixed plastics and suffers from property deterioration after each cycle. By combining the amphiphilic block copolymer strategy and reactive compatibilization strategy, we designed a series of stapler strategies for compatibilizing/upcycling mixed plastics. First, various functionalized graft copolymers were accessed via different synthetic routes. Subsequently, the addition of a very small amount of stapler molecules induced a synergistic effect with the graft copolymers that improved the compatibility and mechanical properties of mixed plastics. These strategies were highly effective for various binary/ternary plastic systems and can be directly applied to postconsumer waste plastics, which can increase the toughness of mixed postconsumer waste plastics by 162 times. Most importantly, it also effectively improved the impact resistance, adhesion performance, and three-dimensional (3D) printing performance of mixed plastics, and permitted the recycling of plastic blends 20 times with minimal degradation in their mechanical properties.

Polymer Multi-Block and Multi-Block+ Strategies for the Upcycling of Mixed Polyolefins and Other Plastics.

Due to a continued rise in the production and use of plastic products, their end-of-life pollution has become a pressing global issue. One of the biggest challenges in plastics recycling is the separation of different polymers. Multi-block copolymers (MBCPs) represent an efficient strategy for the upcycling of mixed plastics via induced compatibilization, but this approach is limited by difficulties associated with synthesis and structural modification. In this contribution, several synthetic strategies are explored to prepare MBCPs with tunable microstructures, which were then used as compatibilizer additives to upcycle mixtures of polyolefins with other plastics. A multi-block+ strategy based on a reactive telechelic block copolymer platform was introduced, which enabled block extension during the in situ melt blending of mixed plastics, leading to better compatibilizing properties as well as better 3D printing capability. This strategy was also applicable to more complex ternary plastic blends. The polymer multi-block strategy enabled by versatile MBCPs synthesis and the multi-block+ strategy enabled by in situ block extension show exciting opportunities for the upcycling of mixed plastics.

A Cocatalyst Strategy to Enhance Ruthenium-Mediated Metathesis Reactivity towards Electron-Deficient Substrates.

Ruthenium-mediated olefin metathesis has been widely applied for the synthesis of various organic molecules and polymers. Inspired by the cocatalyst strategy for olefin polymerization, here we demonstrate that the abstraction of a chloride ion from various commercially available ruthenium catalysts significantly enhances their reactivity towards electron-deficient internal olefins. This cocatalyst strategy can be implemented in ethenolysis and cross-metathesis reactions of FG-CH=CH-FG type substrates bearing electron-withdrawing groups and the synthesis of telechelic polymers that can be converted to polyethylene-like materials with closed-loop recycling properties. The copolymerization of cyclic substrate with cycloolefins followed by hydrogenation afforded polyolefin materials with in-chain break points. Interestingly, switchable catalysis was achieved in the absence and presence of a cocatalyst, which allowed the polymer microstructure and material properties to be fine-tuned.

A co-anchoring strategy for the synthesis of polar bimodal polyethylene.

Since polar groups can poison the metal centers in catalysts, the incorporation of polar comonomers usually comes at the expense of catalytic activity and polymer molecular weight. In this contribution, we demonstrate polar bimodal polyethylene as a potential solution to this trade-off. The more-polar/more-branched low-molecular-weight fraction provides polarity and processability, while the less-polar/less-branched high-molecular-weight fraction provides mechanical and melt properties. To achieve high miscibility between these two fractions, three synthetic routes are investigated: mixtures of homogeneous catalysts, separately supported heterogeneous catalysts, and a co-anchoring strategy (CAS) to heterogenize different homogeneous catalysts on one solid support. The CAS route is the only viable strategy for the synthesis of polar bimodal polyethylene with good molecular level entanglement and minimal phase separation. This produces polyolefin materials with excellent mechanical properties, surface/dyeing properties, gas barrier properties, as well as extrudability and 3D-printability.

A new turn on coumarin-based fluorescence probe for Cr3+ detection in aqueous solution.

Isatin-3-(7'-Methoxychromone-3'-methylidene) hydrazone (L) was synthesized based on chromone schiff base, and used to construct a novel sensor to detect Cr3+. Fluorescence detection experiments were carried out for a range of different concentrations of Cr3+ in aqueous solutions. A concentration calculation model was built on the basis of eliminating interference of excitation spectrum in the fluorescence spectra with mathematical method. Results showed that probe L displayed a 70-fold fluorescence enhancement upon the addition of Cr3+ due to the photo-induced electron transfer (PET) effect. On the other hand, metal ions except Cr3+ did not cause significant change in either the absorption or the fluorescence spectrum of L. In addition, L showed a good selectivity to Cr3+ over other metal cations, especially Al3+ and Cu2+. The probe L can detect Cr3+ highly and selectively by the direct chelation enhanced fluorescence with a detection limit of 3.14 × 10-6 M. Furthermore, benefiting from their good water solubility and biocompatibility, cell imaging and real-time monitoring of Cr3+ in living HepG2 cells were successfully achieved.

A general strategy for heterogenizing olefin polymerization catalysts and the synthesis of polyolefins and composites.

The heterogenization of homogeneous metal complexes on solid supports presents an efficient strategy for bridging homogeneous catalysts with industrially-preferred heterogeneous catalysts; however, a series of drawbacks restrict their implementation in olefin polymerization, particularly for copolymerization with polar comonomers. In this contribution, we report an ionic anchoring strategy that is highly versatile, generally applicable to different systems, and enables strong catalyst-support interactions while tolerating various polar functional groups. In addition to greatly enhanced polymerization properties, the supported catalysts achieved higher comonomer incorporation than their unsupported counterparts. This strategy enabled efficient polymerization at high temperatures at large scale and great control over product morphology, and the facile synthesis of polyolefin composites. More importantly, the dispersion of different fillers in the polyolefin matrix produced great material properties even at low composite loadings. It is expected that this strategy will find applications in different catalytic systems and the synthesis of advanced engineering materials.