Steroidal supramolecular metallogels.

The review deals with an expanding number of steroidal compounds that are capable of forming a metallogel providing a multitude of novel materials rich in their properties. The future of steroidal metallogels holds a myriad of potential applications as new intelligent materials. Detection of potentially harmful compounds without expensive instrumentation, entrapment of environmentally hazardous substances, and sensitive and selective nanomaterials represent only a few of these potential applications. This article reviews the design, synthesis, characterization, and applications of steroidal metallogels.

Systematic Modulation of the Supramolecular Gelation Properties of Bile Acid Alkyl Amides.

The self-assembly properties of nine low-molecular-weight gelators (LMWGs) based on bile acid alkyl amides were studied in detail. Based on the results, the number of hydroxyl groups attached to the steroidal backbone plays a major role in the gelation, although the nature of the aliphatic side chain also modulates the gelation abilities. Of the 50 gel systems studied, 35 are based on lithocholic acid and 15 on cholic acid derivatives. The deoxycholic acid derivatives did not form any gels. The gelation occurred primarily in aromatic solvents and the gels manifested typical fibrous or spherical morphologies. The 13 C cross-polarized magic angle spinning (CPMAS) NMR spectra measured on the crystalline materials and the corresponding wet organogels were analogous, suggesting that the chemical environments, that is, the intermolecular interactions found in the two materials were similar. The single-crystal X-ray structures of all nine bile-acid amide derivatives studied revealed very similar molecular conformations in the solid state and gave insights into the possible intermolecular interactions in the gel state.

Pot-Economy Autooxidative Condensation of 2-Aryl-2-lithio-1,3-dithianes.

The autoxidative condensation of 2-aryl-2-lithio-1,3-dithianes is here reported. Treatment of 2-aryl-1,3-dithianes with n-BuLi in the absence of any electrophile leads to condensation of three molecules of 1,3-dithianes and formation of highly functionalized α-thioether ketones orthothioesters in 51-89% yields upon air exposure. The method was further expanded to benzaldehyde dithioacetals, affording corresponding orthothioesters and α-thioether ketones in 48-97% yields. The experimental results combined with density functional theory studies support a mechanism triggered by the autoxidation of 2-aryl-2-lithio-1,3-dithianes to yield a highly reactive thioester that undergoes condensation with two other molecules of 2-aryl-2-lithio-1,3-dithiane.

Uptake of Ethyl Xanthate to Metal Organic Frameworks.

As the mining industry spreads to new areas in the arctic regions, the need for re-useable efficient methods for mine chemicals' recycling increases. Especially in the case of xanthates, which are used as collectors for many metals from ore. Xanthates are very toxic to aquatic life either directly or indirectly and cause potentially severe health problems to humans after long-term exposure. In the present work, potassium ethyl xanthate (KEX) was observed to coordinate into metal organic frameworks (MOFs). HKUST-1 and its post-synthetically modified forms were observed to behave most effectively of the studied MOFs at low concentrations of KEX. Differences in the uptake of KEX were detected regarding the synthesis method in the case of MIL-100(Fe) synthetized by solvothermal and mechanochemical methods. Other studied MOFs, UiO-66 and MIL-100(Al)/MIL-96(Al), were not observed to be effective in KEX uptake.

Solid-state NMR Spectroscopy of Iodine(I) Complexes.

Solid-state NMR has been applied to a series of Barluenga-type iodine(I) [L-I-L]PF6 (L=pyridine, 4-ethylpyridine, 4-dimethylaminopyridine, isoquinoline) complexes as their hexafluorophosphate salts, as well as their respective non-liquid ligands (L), their precursor silver(I) complexes, and the respective N-methylated pyridinium and quinolinium hexafluorophoshate salts. These results are compared and contrasted to the corresponding solution studies and single-crystal X-ray structures. As the first study of its kind on the solid-state NMR behavior of halogen(I) complexes, practical considerations are also discussed to encourage wider utilization of this technique in the future.

The Effect of the Side Chain on Gelation Properties of Bile Acid Alkyl Amides.

Six bile acid alkyl amide derivatives were studied with respect to their gelation properties. The derivatives were composed of three different bile acids with hexyl or cyclohexyl side chains. The gelation behaviour of all six compounds were studied for 36 solvents with varying polarities. Gelation was observed mainly in aromatic solvents, which is characteristic for bile-acid-based low molecular weight gelators. Out of 108 bile acid-solvent combinations, a total of 44 gel systems were formed, 28 of which from lithocholic acid derivatives, only two from deoxycholic acid derivatives, and 14 from cholic acid derivatives. The majority of the gel systems were formed from bile acids with hexyl side chains, contrary to the cyclohexyl group, which seems to be a poor gelation moiety. These results indicate that the spatial demand of the side chain is the key feature for the gelation properties of the bile acid amides.

1H,13C, 19F NMR, and ESI mass spectral characterization of two geminal difluorosteroids.

Two geminal difluorosteroids, 3,3-difluoro-5beta-cholan-24-oic acid (1) and 3,3-difluoro-5alpha-androstan-17-one (2), have been prepared from corresponding ketosteroids with diethylaminosulphurtrifluoride (DAST) treatment in moderate yields. The structures of 1 and 2 have been characterized by (1)H, (13)C, (19)F NMR, and ESI mass spectral techniques.

Exploitation of bile acid transport systems in prodrug design.

The enterohepatic circulation of bile acids is one of the most efficient recycling routes in the human body. It is a complex process involving numerous transport proteins, which serve to transport bile acids from the small intestine into portal circulation, from the portal circulation into the hepatocyte, from the hepatocyte into the bile, and from the gall bladder to the small intestine. The tremendous transport capacity and organ specificity of enterohepatic circulation combined with versatile derivatization possibilities, rigid steroidal backbone, enantiomeric purity, availability, and low cost have made bile acids attractive tools in designing pharmacological hybrid molecules and prodrugs with the view of improving intestinal absorption, increasing the metabolic stability of pharmaceuticals, specifically targeting drugs to organs involved in enterohepatic circulation, as well as sustaining therapeutically reasonable systemic concentrations of active agents. This article briefly describes bile acid transport proteins involved in enterohepatic circulation, summarizes the key factors affecting on the transport by these proteins, and reviews the use of bile acids and their derivatives in designing prodrugs capable of exploiting the bile acid transport system.

Synthesis, characterization, and saccharide binding studies of bile acid-porphyrin conjugates.

Synthesis and characterization of bile acid-porphyrin conjugates (BAPs) are reported. Binding of saccharides with BAPs in aqueous methanol was studied by monitoring changes in the visible absorption spectral of the porphyrin-moieties. Although these studies clearly showed absorbance changes, suggesting quite high if non-selective binding, the mass spectral studies do not unambiguously support these results.

Structural, thermoanalytical and molecular modeling studies on N-(3-hydroxypropyl) 3 alpha,12 alpha-dihydroxy-5 beta-cholan-24-amide and its monohydrates.

The synthetic method for preparing N-(3-hydroxypropyl) 3 alpha,12 alpha-dihydroxy-5 beta-cholan-24-amide can lead to formation of at least three different crystal forms - an anhydrous compound and two monohydrates. The structural and thermal properties of these forms have been characterized by 13C-CP/MAS-NMR and IR spectroscopy, thermo- gravimetry, differential scanning calorimetry and by powder and single crystal x-ray crystallography. In addition, theoretical 13C-NMR chemical shift calculations were also performed for the anhydrous compound and for the first monohydrate, starting from single crystal structures and the structures of these species have now been verified. The first monohydrate, C27H47NO4 x H2O, crystallizes in orthorhombic space group P2(1)2(1)2(1) with cell parameters: a = 7.1148(2), b = 18.1775(5), c = 20.1813(6), Z = 4.

Dissolution behavior of co-amorphous amino acid-indomethacin mixtures: The ability of amino acids to stabilize the supersaturated state of indomethacin.

Arginine, phenylalanine, and tryptophan have been previously shown to improve the solid-state stability of amorphous indomethacin. The present study investigates the ability of these amino acids to prolong the supersaturation of indomethacin in both aqueous and biorelevant conditions either when freely in solution or when formulated as co-amorphous mixtures. The co-amorphous amino acid-indomethacin mixtures (molar ratio 1:1) and amorphous indomethacin were prepared by cryomilling. Dissolution and precipitation tests were performed in buffer solutions (pH 5 and 6.5) and in Fed and Fasted State Simulated Intestinal Fluids (FeSSIF and FaSSIF, respectively). Precipitation tests were conducted with the solvent shift method. The supersaturation stability of indomethacin and the precipitation inhibitory effect of amino acids were evaluated by calculating the supersaturation factor and the excipient gain factor, respectively. Biorelevant media exerted a significant effect on indomethacin solubility but had little effect on the supersaturation stability. Arginine had the most significant impact on the dissolution properties of indomethacin, but also phenylalanine and tryptophan stabilized supersaturation in some media when formulated as co-amorphous mixtures with indomethacin. Only arginine stabilized supersaturation without co-amorphization, an effect only observed in media of pH 6.5. The unique behavior of the arginine-indomethacin mixture was further demonstrated by the abrupt formation of a precipitate, when an excess physical mixture of arginine and indomethacin was added to FeSSIF (pH 6.5). The solid-state investigation of this precipitate indicated that it probably consisted of crystalline arginine-indomethacin salt with possibly some residual crystalline starting materials.

Spectral and microscopic study of self-assembly of novel cationic spermine amides of betulinic acid.

Supramolecular characteristics of two spermine amides of betulinic acid (1 and 2) were studied by measuring and evaluating their UV-VIS-NIR spectra in aqueous acetonitrile and DOSY-NMR spectra in tetradeuteromethanol, accompanied by atomic force microscopy (AFM) images, scanning electron microscopy (SEM) micrographs, and transmission electron microscopy (TEM) micrographs. Fibrous supramolecular self-assembly of 1 and 2 was observed by AFM images, as well as by the SEM and TEM micrographs. Bathochromic shifts of the absorbance maximum at 870nm to 1015-970nm in the UV-VIS-NIR spectra were observed with increasing water content in the acetonitrile/water systems, indicating formation of fibrous J-type aggregates. Variable temperature DOSY-NMR spectral measurement showed non-linear dependence that also suggests self-assembly behavior of the studied systems. Chiral supramolecular structures were formed by self-assembling due to the chirality of the monomeric molecules. Application of aqueous media during self-assembly procedures is an important factor in the development of targeted drug delivery systems.

A computationally feasible quantum chemical model for 13C NMR chemical shifts of PCB-derived carboxylic acids.

Two quantum chemical models have been derived for the prediction of 13C NMR chemical shifts of novel PCB acids obtained from PCBs by catalytic carbonylation. 13C isotropic shielding constants were calculated employing the GIAO (gauge-independent atomic orbital) method with density functional theory (DFT). The best results were obtained by cluster calculations, which took the solvent effects into account properly. In this approach, a solvent molecule (acetone) was attached by a hydrogen bond to every hydrogen atom present in a PCB acid, and the geometry of the molecular cluster was optimized employing the AM1 method. For 158 chemical shifts, the cross-validated standard error was 2.8 ppm and the cross-validated correlation coefficient was 0.94.

Biocompatible hydrogelators based on bile acid ethyl amides.

Four novel bile acid ethyl amides were synthetized using a well-known method. All the four compounds were characterized by IR, SEM, and X-ray crystal analyses. In addition, the cytotoxicity of the compounds was tested. Two of the prepared compounds formed organogels. Lithocholic acid derivative 1 formed hydrogels as 1% and 2% (w/v) in four different aqueous solutions. This is very intriguing regarding possible uses in biomedicine.

Two-component self-assembly with solvent leading to "wet" and microcrystalline organogel fibers.

HYPOTHESIS: The microcrystalline fibers of N-(2-aminoethyl)-3α-hydroxy-5ß-cholan-24-amide 1 provided a useful model system for studying the complex relationship between morphology, experimental parameters, solvent, and the phenomenon of organogelation. The presence of solvents in the solid forms of 1 along with crystallization behavior suggested solvate formation and polymorphic behavior. EXPERIMENTS: Forty solid state- and xerogel samples of 1 formed in organic solvents and in three categories of experimental conditions were analyzed with single crystal X-ray diffraction (XRD), powder X-ray diffraction (PXRD), Raman microscopy, and attenuated total reflection Fourier-transform infrared spectroscopy (ATR FTIR). FINDINGS: Two polymorphs and four isostructural aromatic solvates of 1 were found among some unknown forms in the samples. Single crystal X-ray structures of one polymorph and bromobenzene solvate were obtained, the latter from a xerogel. Multiple crystal forms could be present in a sample, and their contributions to gelation were estimated taking the experimental conditions into account. Gelator 1 could act as a variable component gelator, either alone or in combination with an aromatic solvent. The research brings new insight into the structures of microcrystalline organogel fibers, linking solvate/inclusion crystal formation with microcrystalline fibers of an organogelator for the first time.

Stimuli-responsive bile acid-based metallogels forming in aqueous media.

The synthesis and gelation properties of a picolinic acid conjugated bile acid derivative in the presence of metal salts along with the stimuli-responsiveness of the systems are reported. The gels are formed in the presence of Cu(2+) ions in the solvent systems composed of 30-50% of organic solvent (MeOH, acetonitrile, or acetone) in water. The gels respond to various stimuli: they can be formed upon sonication or shaking, and their gel-sol transformation can be triggered by a variety of chemical species. NMR, MS, and SEM techniques are exploited in order to gain a deeper insight on the self-assembled systems.

First bisphosphonate hydrogelators: potential composers of biocompatible gels.

Recently, investigation of hydrogels has gained ever increasing attention mostly because of their biomedical and pharmaceutical properties, and novel hydrogelators are constantly studied to find functional applications. Bisphosphonates (BPs) are well-known compounds applicable in different fields but are mostly used in clinics as drugs for bone-related diseases. In this study, a novel class of BP-hydrogelators together with a BP-organogelator was found, and the gelating abilities of the compounds were studied. Several techniques to analyze the structure and the properties of the formed gels were used, including solid state 13C and 31P CPMAS and solution state NMR spectroscopy, IR spectroscopy, PXRD, thermoanalysis, as well as SEM.

Bile acid-cysteamine conjugates: structural properties, gelation, and toxicity evaluation.

Design, synthesis, and characterization of six novel bile acid-cysteamine conjugates together with investigation of their structural studies, gelation properties, and preliminary toxicity evaluation, are reported. Solid state properties of selected compounds were studied by means of X-ray diffraction and (13)C CPMAS NMR spectroscopy. N-(2-thioethyl)-3α,7α,12α-trihydroxy-5ß-cholan-24-amide was shown to exhibit (pseudo)polymorphism, and a single crystal structure of its non-stoichiometric hydrate is reported herein. Cholyl and dehydrocholyl derivatives bearing three functionalities in their steroidal backbone were shown to undergo self-assembly leading to gelation in certain organic solvents. Preliminary morphology studies of the formed gels by scanning electron microscopy (SEM) were performed. The standard model mouse fibroblast cell line together with the MTT and NR tests were utilized for evaluating the toxicity of the prepared compounds. Lithocholyl, ursodeoxycholyl, and dehydrocholyl derivatives turned out to be relatively non-toxic in the conditions studied.

Structural studies of five novel bile acid-4-aminopyridine conjugates.

Synthesis and solid-state structural characterization of five bile acid amides of 4-aminopyridine (4-AP) are reported. Systematic crystallization experiments revealed a number of structural modifications and/or solvate/hydrate systems for these conjugates. Particularly, cholic acid conjugate exhibited five distinct structure modifications, including one anhydrous form, mono- and dihydrates, as well as ethanol and 2-butanol solvates. The obtained crystal forms were examined extensively with various analytical methods, including solid-state NMR, Raman, and IR spectroscopies, powder and single crystal X-ray diffraction methods, thermogravimetry, and differential scanning calorimetry. After releasing their crystal solvent molecules, the resulted non-solvated structure forms showed 50-75°C higher melting points than corresponding bile acids, and thermal degradation occurred for all conjugates at about 300-330°C. Moreover, the single crystal X-ray structure of the ursodeoxycholic acid-4-aminopyridine conjugate is reported.

Bile acid alkylamide derivatives as low molecular weight organogelators: systematic gelation studies and qualitative structural analysis of the systems.

A series of amino- and hydroxyalkyl amides of bile acids have been synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), (1)H and (13)C nuclear magnetic resonance spectroscopy (NMR), as well as electrospray ionization mass spectrometry (ESI-MS) measurements. The ability of the synthesized molecules to promote gel formation was systematically investigated. Out of 396 combinations formed by 11 compounds and 36 different solvents, 22 gel-containing systems were obtained with 1% (w/v) gelator concentration. Apart from one exception, the gelator compounds were lithocholic acid derivatives. This challenges the general trend of bile acid-based physical gelators, according to which the gelation ability of lithocholic acid derivatives is poor. A correlation between the values of Kamlet-Taft parameters and solvent preferences for gelators was observed. The morphologies of the solid and gel structures studied with scanning electron microscopy (SEM) showed variability from fibers to spherical microscale aggregates, the latter of which are unique among bile acid-based organogels. The gels exhibited more complex behavior than was previously established with bile acid derivatives, judging by the microscale diversity present in gelating and non-gelating systems and the tendency for polymorphism. This study underlines the importance of both the molecular and colloidal scale aspects of the gelation phenomenon.