RESUMO
In the European Union (EU), Regulation (EC) 1935/2004 provides a harmonized legal EU framework and sets out the general principles for safety and inertness for all Food Contact Materials (FCMs) and Food Contact Articles. From a food safety point of view, however, specific EU legislation for paper and cardboard FCMs is lacking, while at Member State level, national legislation differs among countries. More than 11,000 chemicals have been identified in all types of FCMs, most of them without any information on toxicity or migration potential from FCM to food. The present review shows a wide variability of protocols, approaches, and conditions used in scientific studies, which are difficult to compare. In this regard, procedures and conditions laid down in EU legislation for plastics and European Standards (EN protocols) may serve as a good basis for the future sample preparation procedures in the framework of paper and cardboard FCMs safety assessment. Challenges on sample preparation procedures are presented involving the interlinked steps of sample preparation, conditions used and their impact in chemical analysis and in vitro bioassay testing. Currently, there is no general consensus on the criteria for structuring, evaluating, and tuning sample preparation procedures for paper and cardboard FCMs. For this purpose, a set of modified criteria and a decision tree are proposed based on the literature. Along this, mass transfer processes occurring in paper and cardboard FCMs and parameters affecting chemical migration need to be accounted for prior to reaching general consensus on criteria for sample preparation procedures.
Assuntos
Contaminação de Alimentos , Embalagem de Alimentos , Alérgenos/análise , União Europeia , Contaminação de Alimentos/análise , Inocuidade dos Alimentos/métodos , Plásticos/análiseRESUMO
Titanium dioxide (TiO2) is used as a food additive (E171) and can be found in sauces, icings, and chewing gums, as well as in personal care products such as toothpaste and pharmaceutical tablets. Along with the ubiquitous presence of TiO2 and recent insights into its potentially hazardous properties, there are concerns about its application in commercially available products. Especially the nano-sized particle fraction (<100 nm) of TiO2 warrants a more detailed evaluation of potential adverse health effects after ingestion. A workshop organized by the Dutch Office for Risk Assessment and Research (BuRO) identified uncertainties and knowledge gaps regarding the gastrointestinal absorption of TiO2, its distribution, the potential for accumulation, and induction of adverse health effects such as inflammation, DNA damage, and tumor promotion. This review aims to identify and evaluate recent toxicological studies on food-grade TiO2 and nano-sized TiO2 in ex-vivo, in-vitro, and in-vivo experiments along the gastrointestinal route, and to postulate an Adverse Outcome Pathway (AOP) following ingestion. Additionally, this review summarizes recommendations and outcomes of the expert meeting held by the BuRO in 2018, in order to contribute to the hazard identification and risk assessment process of ingested TiO2.
Assuntos
Corantes/efeitos adversos , Exposição Dietética/efeitos adversos , Nanopartículas/efeitos adversos , Titânio/efeitos adversos , Animais , Corantes/química , Corantes/farmacocinética , Humanos , Nanopartículas/química , Titânio/química , Titânio/farmacocinética , Testes de ToxicidadeRESUMO
As a result of the European Single Use Plastic Directive and as part of the transition to a circular economy, plastic food contact materials (FCMs) are being replaced, often by renewable plant-based materials. This research aimed to identify which chemical substances are present in plant-based materials. In 2022 a total of 28 samples of the latter materials from the Dutch market were analysed for 313 active substances from plant protection products, 47 per- and polyfluoralkyl substances (PFASs) and 27 heavy metals and other elements. Ten samples contained plant protection products that are not authorised in the EU. Most materials contained PFASs at trace or even high levels. Three out of four investigated sugar cane materials contained 6:2 fluorotelomer alcohol at levels up to 1.7 mg/kg. High contents of aluminium, manganese, iron, zinc, and barium were found. Other heavy metals, such as arsenic, lead and mercury were found in relatively low contents. A broad GC-MS screening was performed, which revealed the presence of plant extractable, plasticisers, antioxidants and hydrocarbons, which were not all authorised for FCMs, but may be present as non-intentionally added substances.
Assuntos
Contaminação de Alimentos , Embalagem de Alimentos , Substâncias Perigosas , Metais Pesados , Contaminação de Alimentos/análise , Metais Pesados/análise , Substâncias Perigosas/análise , Cromatografia Gasosa-Espectrometria de MassasRESUMO
Animal-based measures (ABMs) are the preferred way to assess animal welfare. However, manual scoring of ABMs is very time-consuming during the meat inspection. Automatic scoring by using sensor technology and artificial intelligence (AI) may bring a solution. Based on review papers an overview was made of ABMs recorded at the slaughterhouse for poultry, pigs and cattle and applications of sensor technology to measure the identified ABMs. Also, relevant legislation and work instructions of the Dutch Regulatory Authority (RA) were scanned on applied ABMs. Applications of sensor technology in a research setting, on farm or at the slaughterhouse were reported for 10 of the 37 ABMs identified for poultry, 4 of 32 for cattle and 13 of 41 for pigs. Several applications are related to aspects of meat inspection. However, by European law meat inspection must be performed by an official veterinarian, although there are exceptions for the post mortem inspection of poultry. The examples in this study show that there are opportunities for using sensor technology by the RA to support the inspection and to give more insight into animal welfare risks. The lack of external validation for multiple commercially available systems is a point of attention.
RESUMO
Tetrodotoxin (TTX) potently inhibits TTX-sensitive voltage-gated sodium (NaV) channels in nerve and muscle cells, potentially resulting in depressed neurotransmission, paralysis and death from respiratory failure. Since a wide range of pharmaceutical drugs is known to also act on NaV channels, the use of medicines could predispose individuals to a higher susceptibility towards TTX toxicity. We therefore first assessed the inhibitory effect of selected medicines that act on TTX-sensitive (Riluzole, Chloroquine, Fluoxetine, Valproic acid, Lamotrigine, Lidocaine) and TTX-resistant (Carbamazepine, Mexiletine, Flecainide) NaV channels on spontaneous neuronal activity of rat primary cortical cultures grown on microelectrode arrays (MEA). After establishing concentration-effect curves, binary mixtures of the medicines with TTX at calculated NOEC, IC20 and IC50 values were used to determine if pharmacodynamic interactions occur between TTX and these drugs on spontaneous neuronal activity. At IC20 and IC50 values, all medicines significantly increased the inhibitory effect of TTX on spontaneous neuronal activity of rat cortical cells in vitro. Subsequent experiments using human iPSC-derived neuronal co-cultures grown on MEAs confirmed the ability of selected medicines (Carbamazepine, Flecainide, Riluzole, Lidocaine) to inhibit spontaneous neuronal activity. Despite the need for additional experiments using human iPSC-derived neuronal co-cultures, our combined data already highlight the importance of identifying and including vulnerable risk groups in the risk assessment of TTX.
Assuntos
Tetrodotoxina , Canais de Sódio Disparados por Voltagem , Animais , Humanos , Ratos , Carbamazepina/farmacologia , Flecainida , Lidocaína/toxicidade , Riluzol/farmacologia , Tetrodotoxina/farmacologia , Tetrodotoxina/toxicidade , Canais de Sódio Disparados por Voltagem/efeitos dos fármacosRESUMO
BACKGROUND: A scientific framework on exposure science will boost the multiuse of exposure knowledge across EU chemicals-related policies and improve risk assessment, risk management and communication across EU safety, security and sustainability domains. OBJECTIVE: To stimulate public and private actors to align and strengthen the cross-policy adoption of exposure assessment data, methods and tools across EU legislation. METHODS: By mapping and analysing the EU regulatory landscape making use of exposure information, policy and research challenges and key areas of action are identified and translated into opportunities enhancing policy and scientific efficiency. RESULTS: Identified key areas of actions are to develop a common scientific exposure assessment framework, supported by baseline acceptance criteria and a shared knowledge base enhancing exchangeability and acceptability of exposure knowledge within and across EU chemicals-related policies. Furthermore, such framework will improve communication and management across EU chemical safety, security and sustainability policies comprising sourcing, manufacturing and global trade of goods and waste management. In support of building such a common framework and its effective use in policy and industry, exposure science innovation needs to be better embedded along the whole policymaking cycle, and be integrated into companies' safety and sustainability management systems. This will help to systemically improve regulatory risk management practices. SIGNIFICANCE: This paper constitutes an important step towards the implementation of the EU Green Deal and its underlying policy strategies, such as the Chemicals Strategy for Sustainability.
Assuntos
Políticas , Humanos , Medição de RiscoRESUMO
The use of food supplements is increasing. They are marketed as beneficial for health, well-being, physical or mental condition and performance, or to prevent diseases. Producers add synthetic compounds or illicit herbal material to food supplements to claim desired effects. Claims made to support marketing without scientific evidence are, however, illegal. Intake of adulterated food supplements may lead to serious adverse effects. The aim of this paper is to report the results of analyses of (adulterated) food supplements conducted by the Netherlands Food and Consumer Product Safety Authority between October 2013 and October 2018. In total, 416 supplements were analysed of which 264 (64%) contained one or more pharmacological active substances or plant toxins, such as caffeine, synephrine, sildenafil, icariin, sibutramine, higenamine, hordenine, phenethylamine, methylsynephrine, DMAA, phenolphthalein, octopamine and ephedrine. When compared to dose levels that are considered safe, daily doses of the substances in the food supplements were sometimes much higher, causing a risk for consumers who are unaware of the presence of these pharmacologically active substances. In many cases, neither food nor medicines legislation (easily) enables enforcement actions. This means that some products containing pharmacologically active substances (i.e. synthetic medicines and their illicit analogues), stay available on the market. An undesirable situation because for many of these substances no detailed toxicity data are available.
Assuntos
Suplementos Nutricionais/análise , Análise de Alimentos , Contaminação de Alimentos/análise , Preparações Farmacêuticas/análise , Toxinas Biológicas/análise , Cromatografia Líquida , Humanos , Países Baixos , Medição de Risco , Espectrometria de Massas em TandemRESUMO
There is no uniform Persistent, Bioaccumulative, Toxic (PBT) or very Persistent, very Bioaccumulative (vPvB) assessment of chemicals in Europe, as the various regulatory frameworks use only limited or dissimilar PBT assessments, or none at all. The European REACH Regulation requires a PBT/vPvB assessment for all chemical substances that are produced within or imported into the EU in amounts exceeding 10 tonnes per year, using the criteria as described in REACH Annex XIII. However, not all substances on the EU market need to be screened according to these criteria under REACH. For a number of substances, such as those imported or produced in lower volumes, there is no REACH requirement, and for human and veterinary medicinal products, biocides, plant protection products, and food and feed additives, other EU legislation is in force to regulate their marketing and use. Compounds may also be screened for PBT properties within international agreements, such as the Oslo Paris Convention (OSPAR), the IMO Ballast Water Management Convention, the UNECE POP Protocol, and the UNEP Stockholm Convention on Persistent Organic Pollutants (POPs), which all have their own set of PBT or POP criteria. This study compares the PBT/vPvB assessment under REACH with PBT or POP assessments performed within other regulatory frameworks. Attention is paid to the process of PBT/vPvB/POP identification and which legislative steps can be taken if the PBT/vPvB/POP status is assigned. In addition to the different PBT or POP criteria of the various frameworks, descriptions of these criteria and approaches for application of weight of evidence also vary. Some EU frameworks still refer to the criteria in the former Technical Guidance Documents (TGD) of 2003, which preceded REACH. Although differences between the old TGD criteria and those in the REACH Annex XIII are small, this does cause dissimilarities among the frameworks. The risk management follow-up of a PBT or vPvB identification, which may include a socio economic analysis, also depends on the legal framework and the specific conditions under which a substance is used. Irrespective of the framework in which a substance is used, individual European Member States may propose a substance evaluation for PBT or vPvB identification under REACH. However, authorization is only possible for uses of PBT substances that are not covered by their regular framework but are registered under REACH. How socio-economic criteria should be weighed against PBT/vPvB properties and environmental risks in authorizing or restricting the use of PBT/vPvB substances is often not specified. Thus, although the goal of restricting or banning the use of PBT/vPvB substances is shared among all EU-based regulatory frameworks, there are many differences in how to achieve this goal. These differences create a challenge to harmonize the PBT/vPvB assessment of substances, not only regarding technical criteria, but also regarding regulatory follow-up.
Assuntos
Política Ambiental , Poluentes Ambientais/classificação , Poluição Ambiental/legislação & jurisprudência , União Europeia , Regulamentação Governamental , Tomada de Decisões , Exposição Ambiental/prevenção & controle , Monitoramento Ambiental , Poluentes Ambientais/química , Poluentes Ambientais/toxicidade , Poluição Ambiental/análise , Poluição Ambiental/prevenção & controle , Medição de RiscoRESUMO
A risk assessment on zinc and zinc compouns was carried out withn the framework of Council Regulation 793/93/EEC on Existing Chemicals. This risk assessment basically followed the European Union (EU) technical guidance documents (TGDs). These TGDs are built on the current knowledge on quantitative risk assessments, mainly for organic chemicals. This article describes the tailor-made approach for the zinc risk assessment. This work lasted almost a decade and involved the contributions of all EU member states and industry, who discussed the risk assessment during technical meetings. The risk assessment is initially based on scientific findings but is interrelated with pragmatic considerations. It follows a comprehensive approach, covering both environmental and human health. In the environmental part, new methodologies were developed to deal with the natural background of zinc, essentiality, speciation, and the use of species sensitivity distributions. The major results and the process of drawing conclusions of the risk assessment are outlined: potential environmental risks of zinc and zinc compounds may occur at local and regional scales in surfacewater, sediment, and soil. No potential health risks were identified for consumers and man indirectly exposed via the environment. For workers, potential health risks were identified only for zinc oxide and zinc chloride.
Assuntos
Poluentes Ambientais/toxicidade , Compostos de Zinco/toxicidade , Zinco/toxicidade , Animais , Saúde Ambiental , Europa (Continente) , Humanos , Cooperação Internacional , Medição de RiscoRESUMO
The concentrations of polycyclic aromatic hydrocarbons (PAHs) in the leaf wax of three Plantago species were determined weekly for 3 weeks. The almost glabrous, free-standing leaves of Plantago major and the sparsely hairy Plantago lanceolata leaves were more heavily contaminated with low molecular weight (MW) PAHs (MW < 228) than the densely hairy, partly overlapping Plantago media leaves. This may be caused by the lower canopy roughness (higher aerodynamic resistance), the higher amount of leaf hairs (higher boundary resistance), and/or the higher leaf overlap (smaller accessible leaf area) of P. media. On the other hand, PAHs with MW ≥ 252 tended to show higher concentrations in P. media than in the other two species. This is likely caused by the dense layer of hairs on P. media leaves, which can efficiently intercept the largely particle-bound high MW PAHs. When the PAH concentrations were normalized to projected leaf surface area, the differences between P. media and the other two species became significant (p < 0.05) for the high MW PAHs, while the differences for the low MW PAHs decreased. Although the differences in PAH concentrations between species are relatively small (factor 2-5), this study clearly shows that plant architecture and leaf hairs influence the dry deposition of PAHs.