Comparison of effect of using hard and soft wheat on the high molecular weight-glutenin subunits profile and the quality of produced cookie.

Twelve wheat genotypes with variable grain hardness were evaluated for grain, flour, pasting, dough rheological properties, high molecular weight glutenin subunits (HMW-GS) and their relationship with cookie quality characteristics. The degree of hardness played an important role in the expression of characters under study. Genotypes with higher grain hardness index (GHI) showed higher dough development time and dough stability. GHI and solvent retention capacity were positively related to each other and negatively to spread factor. GluD1 locus of majority of hard wheat genotypes showed 5 + 10 subunit while soft wheat (SW) genotypes with 2 + 12 subunit related to gluten quality and dough properties. Overall, variation in subunits at GluD1 locus led to greater variation amongst studied genotypes followed by GluB1 and GluA1. Subunits Null at GluA1, 20, 7 + 8 and 7 + 9 at GluB1, and 2 + 12 and 5 + 10 at GluD1 showed a profound effect on flour, dough and cookie quality. Distribution of different HMW-GS, gluten characteristics and GHI, thus emerged as major parameters for selection of wheat genotypes for development of cookies. SW (QBP 13-11) with the lowest GHI and HMW-GS profile (2*, 7 and 2 + 12 subunit) showed the highest cookie SF and the lowest BS, thereby, turning out to be the best suitable genotype for producing cookies. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-021-05272-5.

Biochemical and functional attributes of raw and boiled potato flesh and peel powders for suitability in food applications.

Four different potato cultivars, namely, Kufri Chipsona 1 and Kufri Frysona (processing purpose), Kufri Jyoti and Kufri Bahar (table purpose) were converted into flesh and peel powder (raw and after boiling) and studied for their respective biochemical and functional attributes to get an idea of possible dynamics of their utilization in different food formulation as bioadditives. The 16 variants of powder obtained retained less than 10% moisture content and demonstrated 'very good' to 'fair' flowability. Peel powders recorded a higher total mineral, fiber, phenolic contents and total antioxidant activity than the flesh powders which were significantly affected by boiling. Among raw and boiled flesh powders, highest reducing and total sugars were recorded for Kufri Bahar while least was observed in Kufri Chipsona 1. Colour coordinate showed that boiling imparts brightness to flesh powder while peel powder got darkened. Boiling of the tubers resulted in an increase in the resistant starch (~ 29% maximum) and flavour (~ 180% maximum) component. Peel exhibited a total glycoalkaloid content in the range of 0.75 (Kufri Frysona) to 1.7 mg/100 g (Kufri Bahar) that is well within the acceptable limits. Rheological study of the flesh powders revealed a reduction of about 11-18 °C in pasting temperature and about 87-90% in peak viscosity, setback, breakdown value and final viscosity upon boiling. This study revealed that the traditional processing method such as boiling can significantly modify the techno-functional characteristics of potato flesh and peel powders which can further govern their end use in various food formulations.

Rheological evaluations and molecular marker analysis of cultivated bread wheat varieties of India.

The aim of this study was to screen Indian cultivated wheat varieties and list out the parameters/genes required to be improved for an end-product. Therefore, 30 Indian wheat varieties under cultivation by farmers were screened for 14 physico-chemical and rheological parameters, sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) for high molecular weight glutenin subunits (HMW-GS), DNA based molecular markers for low molecular weight glutenin subunits (LMW-GS) and puroindolines (Pin) genes. Based on grain texture, sedimentation value, farinographic, alveographic, HMW-GS and LMW-GS and biscuit making parameters, HS490 was found to be a highly suited for biscuit and soft wheat products. HI1563 and DBW14 were also found to possess characteristics such as low protein, low to medium SDS-sedimentation value and combination of 2*, 7+8 and 2+12 (HMW-GS). DBW14 also had LMW alleles desirable for biscuit quality. DBW14 needs to be improved for grain softness to make it suitable for biscuit quality while both grain softness and LMW alleles need to be improved for HI1563 to improve its biscuit spread factor and alveographic indices for extensible gluten. Rest varieties showed moderate to very strong gluten but the gluten lacked extensibility. Only four varieties K307, DBW39, NI5439 and DBW17 possessed high flour protein and moderately strong gluten. They had more balanced deformation energy (W) and configuration ratio (P/L) combination suggestive of strong and extensible gluten needed for raised bread making. Marker assisted backcross breeding is suggested as solution to produce end-use specific varieties where appropriate alleles at only a few loci need to be incorporated.

Fractionation and grain hardness effect on protein profiling, pasting and rheological properties of flours from medium-hard and extraordinarily soft wheat varieties.

In the present study coarse fraction (CF), medium fine fraction (MFF) and fine fraction (FF) were separated from flours milled from medium-hard and extraordinarily soft wheat varieties and were evaluated for various quality characteristics. Grain hardness of medium-hard and extraordinarily soft wheat varieties varied from 77 to 80 and 17 to 18, respectively. Ash and protein content was the highest for FF and the lowest for CF. Varieties with greater hardness produced higher CF and lower of FF. FF showed higher unextractable polymeric protein (UnEx-PP) and dough stability as compared to MFF and CF. FF showed lower damage starch content as related by lower Sodium SRC (NaSRC) as compared to MFF and FF. CF showed higher paste viscosities than FF and difference were greater amongst fractions from varieties with lower grain hardness. FF with greater proportion of small size particles showed greater accumulation of 98 kDa and 85 kDa PPs than CF. This study demonstrated that fractionation of flours can be employed to produce fractions with varied gluten strength required for production of various products.

Physicochemical and rheological properties of starch and flour from different durum wheat varieties and their relationships with noodle quality.

Starch and flour properties of different Indian durum wheat varieties were evaluated and related to noodle-making properties. Flours were evaluated for pasting properties, protein characteristics (extractable as well as unextractable monomeric and polymeric proteins) and dough rheology (farinographic properties), while starches were evaluated for granule size, thermal, pasting, and rheological properties. Flour peak and final viscosities related negatively to the proportion of monomeric proteins but positively to that of polymeric proteins whereas opposite relations were observed for dough rheological properties (dough-development time and stability). Starches from varieties with higher proportion of large granules showed the presence of less stable amylose-lipids and had more swelling power, peak viscosity and breakdown viscosity than those with greater proportion of small granules. Noodle-cooking time related positively to the proportion of monomeric proteins and starch gelatinization temperatures but negatively to that of polymeric proteins and amylose content. Varieties with more proteins resulted in firmer noodles. Noodle-cohesiveness related positively to the proportion of polymeric proteins and amylose-lipids complexes whereas springiness correlated negatively to amylose content and retrogradation tendency of starches.

Physico-Chemical and Rheological Trait-Based Identification of Indian Wheat Varieties Suitable for Different End-Uses.

India has increased its wheat production phenomenally in the last two decades and it now has a buffer stock of 9.7 million tonnes. However, despite the release of several wheat cultivars, the end-use quality traits of Indian wheat varieties have not been explored in-depth to determine the increasing demand of the domestic processing industry as well as export. In this study, 55 wheat genotypes including 47 released varieties, and 8 genetic stocks were grown along with 10 Australian varieties grown during cropping seasons: 2019-2020 and 2020-2021 and diversity in different physiochemical and rheological traits was evaluated. They showed considerable diversity in all the quality traits studied. However, very few genotypes could be found suitable for any one end-use. Five genotypes were found to possess four to five traits for superior bread-making quality. Two varieties and three advanced breeding lines had up to four good chapati quality traits. None of the released varieties investigated had suitable traits for biscuit making; however, two breeding lines possessed requisite quality traits suitable for biscuit making. It is, therefore, concluded that systematic breeding efforts are required to develop genotypes that bring together the most important quality traits in a single genotype to be suitable for domestic industry as well as for export.

Mapping QTL for Phenological and Grain-Related Traits in a Mapping Population Derived from High-Zinc-Biofortified Wheat.

Genomic regions governing days to heading (DH), days to maturity (DM), plant height (PH), thousand-kernel weight (TKW), and test weight (TW) were investigated in a set of 190 RILs derived from a cross between a widely cultivated wheat-variety, Kachu (DPW-621-50), and a high-zinc variety, Zinc-Shakti. The RIL population was genotyped using 909 DArTseq markers and phenotyped in three environments. The constructed genetic map had a total genetic length of 4665 cM, with an average marker density of 5.13 cM. A total of thirty-seven novel quantitative trait loci (QTL), including twelve for PH, six for DH, five for DM, eight for TKW and six for TW were identified. A set of 20 stable QTLs associated with the expression of DH, DM, PH, TKW, and TW were identified in two or more environments. Three novel pleiotropic genomic-regions harboring co-localized QTLs governing two or more traits were also identified. In silico analysis revealed that the DArTseq markers were located on important putative candidate genes such as MLO-like protein, Phytochrome, Zinc finger and RING-type, Cytochrome P450 and pentatricopeptide repeat, involved in the regulation of pollen maturity, the photoperiodic modulation of flowering-time, abiotic-stress tolerance, grain-filling duration, thousand-kernel weight, seed morphology, and plant growth and development. The identified novel QTLs, particularly stable and co-localized QTLs, will be validated to estimate their effects in different genetic backgrounds for subsequent use in marker-assisted selection (MAS).

Nitrogen uptake and remobilization from pre- and post-anthesis stages contribute towards grain yield and grain protein concentration in wheat grown in limited nitrogen conditions.

Background: In wheat, nitrogen (N) remobilization from vegetative tissues to developing grains largely depends on genetic and environmental factors. The evaluation of genetic potential of crops under limited resource inputs such as limited N supply would provide an opportunity to identify N-efficient lines with improved N utilisation efficiency and yield potential. We assessed the genetic variation in wheat recombinant inbred lines (RILs) for uptake, partitioning, and remobilization of N towards grain, its association with grain protein concentration (GPC) and grain yield. Methods: We used the nested association mapping (NAM) population (195 lines) derived by crossing Paragon (P) with CIMMYT core germplasm (P × Cim), Baj (P × Baj), Watkins (P × Wat), and Wyalkatchem (P × Wya). These lines were evaluated in the field for two seasons under limited N supply. The plant sampling was done at anthesis and physiological maturity stages. Various physiological traits were recorded and total N uptake and other N related indices were calculated. The grain protein deviation (GPD) was calculated from the regression of grain yield on GPC. These lines were grouped into different clusters by hierarchical cluster analysis based on grain yield and N-remobilization efficiency (NRE). Results: The genetic variation in accumulation of biomass at both pre- and post-anthesis stages were correlated with grain-yield. The NRE significantly correlated with aboveground N uptake at anthesis (AGNa) and grain yield but negatively associated with AGN at post-anthesis (AGNpa) suggesting higher N uptake till anthesis favours high N remobilization during grain filling. Hierarchical cluster analysis of these RILs based on NRE and yield resulted in four clusters, efficient (31), moderately efficient (59), moderately inefficient (58), and inefficient (47). In the N-efficient lines, AGNa contributed to 77% of total N accumulated in grains, while it was 63% in N-inefficient lines. Several N-efficient lines also exhibited positive grain protein deviation (GPD), combining high grain yield and GPC. Among crosses, the P × Cim were superior and N-efficient, while P × Wya responded poorly to low N input. Conclusions: We propose that traits favouring pre- or post-anthesis biomass accumulation and pre-anthesis N uptake may be targeted for breeding to improve grain-yield under limited N. The lines with positive GPD, a first report of genotype-dependent GPD associated with both AGNpa and AGNa in wheat, may be used as varieties or genetic resources to improve grain yield with high GPC for sustainable development under limited N conditions. Supplementary Information: The online version contains supplementary material available at 10.1186/s43170-023-00153-7.

Indian Wheat Genomics Initiative for Harnessing the Potential of Wheat Germplasm Resources for Breeding Disease-Resistant, Nutrient-Dense, and Climate-Resilient Cultivars.

Wheat is one of the major staple cereal food crops in India. However, most of the wheat-growing areas experience several biotic and abiotic stresses, resulting in poor quality grains and reduced yield. To ensure food security for the growing population in India, there is a compelling need to explore the untapped genetic diversity available in gene banks for the development of stress-resistant/tolerant cultivars. The improvement of any crop lies in exploring and harnessing the genetic diversity available in its genetic resources in the form of cultivated varieties, landraces, wild relatives, and related genera. A huge collection of wheat genetic resources is conserved in various gene banks across the globe. Molecular and phenotypic characterization followed by documentation of conserved genetic resources is a prerequisite for germplasm utilization in crop improvement. The National Genebank of India has an extensive and diverse collection of wheat germplasm, comprising Indian wheat landraces, primitive cultivars, breeding lines, and collection from other countries. The conserved germplasm can contribute immensely to the development of wheat cultivars with high levels of biotic and abiotic stress tolerance. Breeding wheat varieties that can give high yields under different stress environments has not made much headway due to high genotypes and environmental interaction, non-availability of truly resistant/tolerant germplasm, and non-availability of reliable markers linked with the QTL having a significant impact on resistance/tolerance. The development of new breeding technologies like genomic selection (GS), which takes into account the G × E interaction, will facilitate crop improvement through enhanced climate resilience, by combining biotic and abiotic stress resistance/tolerance and maximizing yield potential. In this review article, we have summarized different constraints being faced by Indian wheat-breeding programs, challenges in addressing biotic and abiotic stresses, and improving quality and nutrition. Efforts have been made to highlight the wealth of Indian wheat genetic resources available in our National Genebank and their evaluation for the identification of trait-specific germplasm. Promising genotypes to develop varieties of important targeted traits and the development of different genomics resources have also been highlighted.

Identification of Genetic Loci and Candidate Genes Related to Grain Zinc and Iron Concentration Using a Zinc-Enriched Wheat 'Zinc-Shakti'.

The development of nutritionally enhanced wheat (Triticum aestivum L.) with higher levels of grain iron (Fe) and zinc (Zn) offers a sustainable solution to micronutrient deficiency among resource-poor wheat consumers. One hundred and ninety recombinant inbred lines (RILs) from 'Kachu' × 'Zinc-Shakti' cross were phenotyped for grain Fe and Zn concentrations and phenological and agronomically important traits at Ciudad Obregon, Mexico in the 2017-2018, 2018-2019, and 2019-2020 growing seasons and Diversity Arrays Technology (DArT) molecular marker data were used to determine genomic regions controlling grain micronutrients and agronomic traits. We identified seven new pleiotropic quantitative trait loci (QTL) for grain Zn and Fe on chromosomes 1B, 1D, 2B, 6A, and 7D. The stable pleiotropic QTL identified have expanded the diversity of QTL that could be used in breeding for wheat biofortification. Nine RILs with the best combination of pleiotropic QTL for Zn and Fe have been identified to be used in future crossing programs and to be screened in elite yield trials before releasing as biofortified varieties. In silico analysis revealed several candidate genes underlying QTL, including those belonging to the families of the transporters and kinases known to transport small peptides and minerals (thus assisting mineral uptake) and catalyzing phosphorylation processes, respectively.

Effect of growing conditions on proximate, mineral, amino acid, phenolic composition and antioxidant properties of wheatgrass from different wheat (Triticum aestivum L.) varieties.

Wheatgrass juice powder (WJP) from four wheat varieties grown using soil, coco-peat with nutrient solution (CNS) and water (soaked (8 h), germinated (36 h) and harvested on 10th day) were examined for proximate composition, mineral, amino acid, phenolic (free and bound) composition and antioxidant properties. The yield, ash and protein contents of WJP ranged between 4.88-7.87%, 5.18-15.93% and 38.75-50.17%, respectively. The total phenolic, flavonoid, chlorophyll content (TCC) and antioxidant activity varied from 12.02 to 17.44 mg GAE/g, 4.38-10.10 mg QE/g, 3.01-5.63 mg/g, and 13.54-17.33 µmol TE/g, respectively. HD-3086 grown using soil exhibited highest antioxidant properties, TCC and Mg content. WJP of C-306 grown using CNS had abundant essential amino acids (AAs). Phenolic acids (ferulic, syringic and sinapic acids) and flavonoids (catechin, rutin, vitexin and isovitexin) and minerals (K, P, Ca, Mg, Na and Fe) were predominant in WJP. The AAs and free phenolics were more in CNS and soil grown WJP, respectively.

Evaluation of heat stress through delayed sowing on physicochemical and functional characteristics of grains, whole meals and flours of India wheat.

The physicochemical and functional characteristics of grain, meal and flour of timely sown wheat (TSW) and delayed sown wheat (DSW) were compared to see the effects of heat stress (HS). TSW and DSW of different lines were sown as per the approved timings. DSW experienced higher temperature during flowering and had shorter vegetative and maturation period than TSW. Pasting and dough rheological properties were measured using Rapid Visco-Analyser and Farinograph, respectively, while gliadins and glutenins profiling was done by SDS-PAGE. Delayed sowing decreased grain yield and diameter while increased protein and all categories of gliadins and high molecular weight glutenins. DSW showed higher peak viscosity, breakdown-viscosity and dough stability and lower setback viscosity, damaged starch, arabinoxylans and water absorption than TSW. HS in DSW appeared to lower starch synthesis causing proportionate increase in grain hardness and proteins content leading to changes in milling and rheological characteristics.

Identification of Novel Genomic Regions for Biofortification Traits Using an SNP Marker-Enriched Linkage Map in Wheat (Triticum aestivum L.).

Micronutrient and protein malnutrition is recognized among the major global health issues. Genetic biofortification is a cost-effective and sustainable strategy to tackle malnutrition. Genomic regions governing grain iron concentration (GFeC), grain zinc concentration (GZnC), grain protein content (GPC), and thousand kernel weight (TKW) were investigated in a set of 163 recombinant inbred lines (RILs) derived from a cross between cultivated wheat variety WH542 and a synthetic derivative (Triticum dicoccon PI94624/Aegilops tauschii [409]//BCN). The RIL population was genotyped using 100 simple-sequence repeat (SSR) and 736 single nucleotide polymorphism (SNP) markers and phenotyped in six environments. The constructed genetic map had a total genetic length of 7,057 cM. A total of 21 novel quantitative trait loci (QTL) were identified in 13 chromosomes representing all three genomes of wheat. The trait-wise highest number of QTL was identified for GPC (10 QTL), followed by GZnC (six QTL), GFeC (three QTL), and TKW (two QTL). Four novel stable QTL (QGFe.iari-7D.1, QGFe.iari-7D.2, QGPC.iari-7D.2, and QTkw.iari-7D) were identified in two or more environments. Two novel pleiotropic genomic regions falling between Xgwm350-AX-94958668 and Xwmc550-Xgwm350 in chromosome 7D harboring co-localized QTL governing two or more traits were also identified. The identified novel QTL, particularly stable and co-localized QTL, will be validated to estimate their effects on different genetic backgrounds for subsequent use in marker-assisted selection (MAS). Best QTL combinations were identified by the estimation of additive effects of the stable QTL for GFeC, GZnC, and GPC. A total of 11 RILs (eight for GZnC and three for GPC) having favorable QTL combinations identified in this study can be used as potential donors to develop bread wheat varieties with enhanced micronutrients and protein.

Comparative analysis of native and defatted flour from hard, extraordinarily soft, and medium-hard wheat varieties for protein solvation, pasting, mixing, and dough rheological behavior.

The effect of lipids extraction on protein salvation, pasting, and dough rheological behavior of flours dough from hard wheat (HW), extraordinarily soft wheat (Ex-SW), and medium-hard wheat (MHW) flour was analyzed. The varieties selected had wide variation in grain hardness index (17 to 95). Ex-SW revealed lower tryptophan fluorescent emission and water absorption (WA) than MHW and HW varieties. The change in pasting parameters on defatting was the highest for Ex-SW varieties. Native flour (NF) of HW varieties showed high protein content, pasting and dough strength, and fluorescence intensity in comparison to Ex-SW varieties, while on defatting this was reversed. Protein pattern of defatted flour and NF did not differ significantly. Defatting of flours increased WA and decreased dough stability (DS). The decrease in DS on defatting was more for Ex-SW varieties than others. DS for HW and MHW varieties reduced upon defatting. Defatting significantly increased all mixographic and rheological properties except peak time. Overall, results showed that defatting of flour improved paste and dough strength. PRACTICAL APPLICATION: Higher gluten strength of defatted wheat flour of varied grain hardness has wide applications. Most of the Indian bread wheat varieties possess GluD1 high-molecular-weight glutenin subunit (HMW-GS) allelic composition of (2 + 12), which is not suitable for bread making due to weak gluten strength. Defatting of flours improved the gluten strength of strong and weak flour dough of different wheat varieties irrespective of GluD1 allelic composition for HMW-GS. Defatted flour may be used to improve the baking and cooking performance of dough made from weak wheat. These findings are highly suitable for wheat milling and baked product manufacturing industries.

Extraordinarily soft, medium-hard and hard Indian wheat varieties: Composition, protein profile, dough and baking properties.

Hard wheat (HW), medium-hard wheat (MHW) and extraordinarily soft wheat (Ex-SW) varieties with grain hardness index (GHI) of 83 to 95, 72 to 80, 17 to 29 were evaluated for pasting, protein molecular weight (MW) distribution, dough rheology and baking properties. Flours from varieties with higher GHI had more protein content, ash content and paste viscosities. Ex-SW had more glutenins proportion as compared to HW and MHW. Flours from Ex-SW varieties showed lower NaSRC, WA and mixographic parameters as compared to HW and MHW. Dough from flours milled from Ex-SW had higher Intermolecular-ß-sheets (IM-ß-sheets) than those from MHW and HW. Muffins volume increased with decrease in GHI, Ex-SW varieties had more muffin volume and less air space. The accumulation of polypeptides (PPs) varied significantly in different varieties. Ex-SW variety (QBP12-10) showed accumulation of 98, 90, 81 and 79kDa PPs, which was unique and was different from other varieties.

Molecular mapping of the grain iron and zinc concentration, protein content and thousand kernel weight in wheat (Triticum aestivum L.).

Genomic regions responsible for accumulation of grain iron concentration (Fe), grain zinc concentration (Zn), grain protein content (PC) and thousand kernel weight (TKW) were investigated in 286 recombinant inbred lines (RILs) derived from a cross between an old Indian wheat variety WH542 and a synthetic derivative (Triticum dicoccon PI94624/Aegilops squarrosa [409]//BCN). RILs were grown in six environments and evaluated for Fe, Zn, PC, and TKW. The population showed the continuous distribution for all the four traits, that for pooled Fe and PC was near normal, whereas, for pooled Zn, RILs exhibited positively skewed distribution. A genetic map spanning 2155.3cM was constructed using microsatellite markers covering the 21 chromosomes and used for QTL analysis. 16 quantitative trait loci (QTL) were identified in this study. Four QTLs (QGFe.iari-2A, QGFe.iari-5A, QGFe.iari-7A and QGFe.iari-7B) for Fe, five QTLs (QGZn.iari-2A, QGZn.iari-4A, QGZn.iari-5A, QGZn.iari-7A and QGZn.iari-7B) for Zn, two QTLs (QGpc.iari-2A and QGpc.iari-3A) for PC, and five QTLs (QTkw.iari-1A, QTkw.iari-2A, QTkw.iari-2B, QTkw.iari-5B and QTkw.iari-7A) for TKW were identified. The QTLs together explained 20.0%, 32.0%, 24.1% and 32.3% phenotypic variation, respectively, for Fe, Zn, PC and TKW. QGpc.iari-2A was consistently expressed in all the six environments, whereas, QGFe.iari-7B and QGZn.iari-2A were identified in two environments each apart from pooled mean. QTkw.iari-2A and QTkw.iari-7A, respectively, were identified in four and three environments apart from pooled mean. A common region in the interval of Xgwm359-Xwmc407 on chromosome 2A was associated with Fe, Zn, and PC. One more QTL for TKW was identified on chromosome 2A but in a different chromosomal region (Xgwm382-Xgwm359). Two more regions on 5A (Xgwm126-Xgwm595) and 7A (Xbarc49-Xwmc525) were found to be associated with both Fe and Zn. A QTL for TKW was identified (Xwmc525-Xbarc222) in a different chromosomal region on the same chromosome (7A). This reflects at least a partly common genetic basis for the four traits. It is concluded that fine mapping of the regions of the three chromosomes of A genome involved in determining the accumulation of Fe, Zn, PC, and TKW in this mapping population may be rewarding.

Diversity in quality traits amongst Indian wheat varieties I: flour and protein characteristics.

The relationships of polymeric as well as monomeric proteins (unextractable and extractable) with various flour properties amongst Indian wheat varieties were evaluated. Unextractable polymeric proteins and unextractable monomeric proteins in flours ranged from 23.83% to 51.97% and 48.03% to 76.17%, respectively. Varieties with higher grain hardness index resulted into flours with higher a(∗), ash content and protein content. Unextractable polymeric and monomeric proteins were related to grain hardness index. Unextractable polymeric proteins showed a positive correlation with gluten index and LASRC. Majority of varieties with HMW-GS combinations of 91kDa+80kDa+78kDa+74kDa PPs showed very high grain hardness index (97-100).

Diversity in quality traits amongst Indian wheat varieties II: Paste, dough and muffin making properties.

The relationship between protein molecular weight (MW) distribution, quality characteristics and muffin making properties amongst Indian wheat varieties were evaluated. Flours from varieties with higher grain weight showed lower proportion of fine particles. Lactic acid solvent retention capacity (LASRC), sedimentation value (SV) and dough stability (DS) correlated with the proportion of 0-55 µm size particles. Paste peak viscosity and breakdown viscosity showed positive correlation with polymeric protein and negatively with monomeric protein, α-amylase activity and sodium carbonate solvent retention capacity (NaSRC). Gluten strength indicators such as DS, dough development time (DDT), LASRC and gluten index (GI) were positively related to polymeric protein and negatively to monomeric protein. Both G' and G″ were correlated significantly with GI, LASRC, DS and DDT. The varieties that possesses high MW glutenin subunits combinations of 91 kDa + 84 kDa + 78 kDa + 74 kDa showed lower G' and G″. Muffin volume was positively correlated with gluten content and LASRC.

Relationship of various flour properties with noodle making characteristics among durum wheat varieties.

The grain, flour, dough and noodle making properties of Indian durum wheat varieties were evaluated. Varieties having higher grain weight had lower hardness and higher yellow pigment content. Gluten performance index showed positive correlation with α-helix and negative with intermolecular+antiparallel-ß-sheets in gluten. The proportion of extracted polymeric proteins was related to dough strength. Elastic (G') and loss (G″) modulus of dough were positively correlated to intermolecular+antiparallel-ß-sheets and negatively with ß-turn+ ß-sheets proportion of dough and gluten. PDW291 with exceptionally higher G' and G″ and best noodle making properties showed the presence 90 kDa and 88 kDa polypeptides corresponding to 14+15 and type 2 banding pattern.

Stability Performance of Inductively Coupled Plasma Mass Spectrometry-Phenotyped Kernel Minerals Concentration and Grain Yield in Maize in Different Agro-Climatic Zones.

Deficiency of iron and zinc causes micronutrient malnutrition or hidden hunger, which severely affects ~25% of global population. Genetic biofortification of maize has emerged as cost effective and sustainable approach in addressing malnourishment of iron and zinc deficiency. Therefore, understanding the genetic variation and stability of kernel micronutrients and grain yield of the maize inbreds is a prerequisite in breeding micronutrient-rich high yielding hybrids to alleviate micronutrient malnutrition. We report here, the genetic variability and stability of the kernel micronutrients concentration and grain yield in a set of 50 maize inbred panel selected from the national and the international centres that were raised at six different maize growing regions of India. Phenotyping of kernels using inductively coupled plasma mass spectrometry (ICP-MS) revealed considerable variability for kernel minerals concentration (iron: 18.88 to 47.65 mg kg(-1); zinc: 5.41 to 30.85 mg kg(-1); manganese: 3.30 to 17.73 mg kg(-1); copper: 0.53 to 5.48 mg kg(-1)) and grain yield (826.6 to 5413 kg ha(-1)). Significant positive correlation was observed between kernel iron and zinc within (r = 0.37 to r = 0.52, p < 0.05) and across locations (r = 0.44, p < 0.01). Variance components of the additive main effects and multiplicative interactions (AMMI) model showed significant genotype and genotype × environment interaction for kernel minerals concentration and grain yield. Most of the variation was contributed by genotype main effect for kernel iron (39.6%), manganese (41.34%) and copper (41.12%), and environment main effects for both kernel zinc (40.5%) and grain yield (37.0%). Genotype main effect plus genotype-by-environment interaction (GGE) biplot identified several mega environments for kernel minerals and grain yield. Comparison of stability parameters revealed AMMI stability value (ASV) as the better representative of the AMMI stability parameters. Dynamic stability parameter GGE distance (GGED) showed strong and positive correlation with both mean kernel concentrations and grain yield. Inbreds (CM-501, SKV-775, HUZM-185) identified from the present investigation will be useful in developing micronutrient-rich as well as stable maize hybrids without compromising grain yield.