Plaster board waste (PBW) - A potential fluoride leaching source in soil/water environments and, fluoride immobilization studies using soils.

Plaster board waste generated from industries, usually contains major proportion of calcium as calcium sulfate. In addition, fluoride is remarkably one among the constituents of this waste material which leaches off into the soil and aquatic environments and causes fluoride pollution. In order to simulate how the dumping of PBW causes fluoride contamination in soil and water sources, shaking and stirring based batch-mode leaching studies were conducted. These studies explored the leaching of fluoride as a function of particle size, agitation time, pH of the leaching solvent (distilled water), L/S (water: PBW) ratio, temperature and electrolytes. It was explored that 1 g of plaster board waste contains18.54 mg F per gram of PBP. High leaching of 3.72 mg F per liter was studied at pH 6.02 with Ca2+ and TDS contents of 1050 mg L-1 and1640 mg L-1 respectively. The influence of sodium electrolytes such as chloride, nitrate, hydrogen carbonate, carbonate, sulfate, borate, phosphate and acetate on the leaching of fluoride from PBW was studied. The influence of fluoride leaching by sodium phosphate recorded a high value of 12.75 mg L-1 with no detectable amount of calcium ions. The influence of eight electrolytic mixtures each containing five sodium electrolytes on fluoride leaching corroborated the highest leaching in mixtures containing phosphate followed by hydrogen carbonate/carbonate. Solutions of calcium and aluminium chloride and their mixture were used to measure the rate of leachable fluoride in solution. Furthermore, the fluoride leaching at different temperatures and acids was studied. Naturally occurring soils when blended with PBW were observed to immobilize fluoride and lessened the amount of leaching fluoride in water. Various characterization studies such as FTIR, Raman, FESEM (with EDS), XRD and XPS were carried out for PBW and its treated samples using different electrolytes. Fluoride leaching proportionate to the precipitation of carbonate and phosphate was recorded in the case of appropriate electrolyte and mixtures.

High fluoride in groundwater and associated non-carcinogenic risks at Tiruvannamalai region in Tamil Nadu, India.

The present investigation in the Tiruvannamalai region is about high fluoride contamination of groundwater samples from bore wells and open wells. About 75% of groundwater samples were found predominantly containing the fluoride content greater than the acceptable limit of 1.5 mg/L in the ranges 1.51 - 2.00 mg/L (23%), 2.01 - 3.00 mg/L (36%) and greater than or equal to 3.01 mg/L (16%) as per WHO. The other water quality parameters were found within the permissible limit of WHO. Taking the groundwater sources into consideration, the non - carcinogenic risk due to high fluoride concentration in groundwater sources revealed that teen - aged (98%), Children (92%) and Infant (98%) categories were at greater risk than those under Men (50%) and Women (69%) categories. The mapping was done on the spatial distribution of fluoride concentration in groundwater and the associated health risk by Ordinary Kriging. The correlation coefficients among the parameters witnessed that the hydro-chemical facies are interdependent. Box - Whisker plots illustrated the dispersion of various water quality parameters. The WQI data represented the quality of groundwater in view of potable nature due to dissolved ions. The Gibbs, bivariate mixing and the scatter plots ascribed the dissolution of carbonate and silicate minerals which dominate the groundwater chemistry. The factor analysis detailed the extracted loadings of different parameters of groundwater sources and differentiated the percentage variance values between bore well and open well sources.

The Py - GC-TOF-MS analysis and characterization of microplastics (MPs) in a wastewater treatment plant in Gauteng Province, South Africa.

Wastewater treatment plants (WWTPs) in South Africa, like is the case for most WWTPs around the globe albeit capable of removing substantial quantities of microplastics (MPs) and in fact, the treatments become ineffective for those plastic particles less than 100 µm. As a consequence, the receiving water bodies in which the final effluent is discharged becomes highly polluted. The present research is devoted to the analysis of the pervasive MPs in wastewaters of the treatment plant located in the Gauteng Province, South Africa using Pyrolysis - GC-TOF-MS. Based on the results, there were 23 pyrolyzate products with contributions from PVC, PA, PET and PE with abundances of 47.8%, 13.1%, 17.4% and 4.3% respectively. The remaining 17.4% could be attributed as additives in MPs. The SEM images illustrated that the MPs appeared to be inter - wined, fibrous of different thicknesses and lengths. The highly weathered MPs exhibited the rough surface which was noticeably damaged with peeled off layers presumably because of photo-oxidation during the aging process. The vibrational modes of FTIR revealed the presence of the various functional groups in the corresponding polymers of MPs. The thermal studies confirmed the presence of calcium, aluminum and silicon as residues of catalysts or flame retardants or UV stabilizers in MPs or as adsorbates resulting from the surface adsorption from the surroundings. The Py-GC-TOF-MS confirmed the identity of the various fragments related to the MPs monomers.

Micro-plastic pollution along the Bay of Bengal coastal stretch of Tamil Nadu, South India.

In the present-day context, micro-plastic particles in a marine environment are increasingly ubiquitous and of considerable persistence. In line with the micro-plastic pollution, the present contribution is devoted to the investigation of micro-plastic particles (MPs) along the urban sandy beach called Marina, the renowned longest beach in India. Along the sea coast of about 5 km, the quantification of micro-plastic particles using optical microscope evidenced the granular, filamentous, filmy and tubular fragments in a total of 72 marine samples including those filtered in the marine water column (WAT; 24 samples), those found in wet sediment (WET; 24 samples) and those found in dry sand (DSS; 24 samples). The filamentous-typed plastics of 79%, 57% and 52%, respectively in WET, WAT and DSS dominated over the other granular and tubular types. The micro-plastic particles were in the range of 60-820 items per m3, 60-1620 items per kg and 20-1540 items per kg for WAT, WET and DSS, respectively. The standard deviation for the microplastics abundance were 193.1, 396.6 and 364.6 for WAT, WET and DSS respectively. Upon visual inspection, the micro particles were observed in eight different colors and most of the samples were found to contain two different fragment types. Apart from the optical microscopic examination, the micro-plastics particles were studied by scanning electron microscope (SEM) coupled with elemental analysis by energy dispersive spectroscopy (EDS). The energy spectral graphs displayed that the micro-filaments and micro-tubular particles contained polyesters and fluoro-polymers. The presence of few micro-filaments of polypropylene and polyethylene was also evidenced from their atomic percentage values of carbon of about 88% and 93%, respectively. The presence of fluoro-polymers and polyesters was also confirmed by Fourier Transform Infra-Red (FTIR). Excepting the fluoro-polymers, the micro-plastics particles contained elements arising from sea water (Na, Cl, S, Mg, Ca, K). Heavy metals such as Cu, Mn, Mo, Ru and Rh were observed in micro-tubular fragments. Fe and Ti elements were detected with the highest atomic percentage of 17.19 and 19.84 in micro-tubular fragments. All the observations and analyses give a photography of the nature and the spatial distribution of MPs along this Indian beach.

The seasonal status of chemical parameters in shallow coastal aquifers of Rameswaram Island, India.

The study area Rameswaram, a holy island, is famous for the sacred Ramanathaswamy temple, which cements people of the country regardless of their place, residence, or their religion or creed. This coastal tract is experiencing a chronic fresh water shortage, despite a few spring sources. The study area is selected for the characterization of physico-chemical parameters viz., pH, EC, TDS, salinity, TA, TH, CH, MH, chloride, and fluoride for 150 groundwater samples and the impact of pre- and post-monsoons on the groundwater quality is studied. The water quality index advocates the transfer of groundwater quality from unacceptable status in the pre-monsoon into an acceptable status in the post-monsoon. The Langelier saturation index reflects the scaling tendency of groundwater in the study area. The Karl Pearson correlation matrix has approved the maximum influence of calcium and chloride on the total dissolved solids. It is interesting to conclude that the groundwater in the study area has very had nature, especially of non-carbonate type.

Solid waste, its health impairments and role of rag pickers in Tiruchirappalli city, Tamil Nadu, Southern India.

In India, the significant increase in the generation of municipal solid waste (MSW) during the last few decades is due to the rapid population and economic development. Though the appropriate attempts are made through the 3-'R' principles, waste management still needs to be envisaged seriously by everybody for a cleaner and greener environment. Rag-pickers, who contribute to solid waste management to some extent, are the people who rummage through garbage bins to pick out 'rags' for their livelihood. These rag-pickers usually collect the materials that have good re-sale value as these materials are mostly recycled or reused. In the present study, the collection and the management of solid waste and the level of microbial pollution generated through air, soil and solid waste were studied. A questionnaire survey based on age, sex, educational status, socio-economic status, habits and health effects was conducted from 65 randomly selected rag-pickers from various places of Tiruchirappalli city The results revealed that they can be properly educated and trained to protect themselves from unhygienic practices and addiction. Either the Government or non-governmental organizations (NGOs) should devise a suitable proposal to monitor and make use of these unorganized rag-pickers who are indispensable to the society.

Characterization of plastic micro particles in the Atlantic Ocean seashore of Cape Town, South Africa and mass spectrometry analysis of pyrolyzate products.

The microplastic particles with 29 pyrolyzate compounds of marine water samples from the seashore locations in Cape Town, South Africa were analysed using Pyrolysis- GC-TOF-MS. The mass spectra data documented the presence of various chemical groups that include alkanes, alkenes, dienes, fatty acids and esters, biphenyl and benzene (along with derivatives). Out of 16 identified polymers in the study area, polythene (PE) was the dominant in six out of seven locations with 87.5% followed by polyethylene terephthalate (PET) and polyvinylchloride (PVC) in five (71.4%) and four (57.1%) out of seven locations respectively. The other constituent polymers of microplastics identified through pyrolyzates were polystyrene (PS), polyamide 12 (PA-12) polyacrylic acid (PAA) and ethyl vinyl acetate (EVA) copolymer. The microplastic samples contained six additives predominantly in the family of fatty acid esters and nine plasticizers from alcohols, carboxylic esters and acids. The base peaks of m/z 41, 43, 55, 57, 69, 73, 91, 102, 105, 127 and 154 were characterized respectively with the fragmented species of C3H5+, C3H7+, C4H7+, C4H9+, C5H9+, C3H5O2+, C7H7+, C3H10O2+(McLafferty ion), C8H9+, C8H15O+ and C12H10+. Accordingly to Globally Harmonized System (GHS) of hazard classification, about 27.4% of pyrolyzates are Irritants, 31.4% of pyrolyzates found to be Irritants along with other hazards such as Flammable, Compressed Gas, Environmental Hazard, Corrosive, Health Hazard, Acute Toxicity and Allergy. About 41.2% of the pyrolyzates are not classified under the Irritant category. Characterizations of the plastic microparticles from the seven seashore locations such as FTIR, SEM with EDX and TGA were also done and discussed to understand the functional groups, surface morphology with elemental composition and stability respectively of the polymeric microparticles.

An investigation on the pollution status of holy aquifers of Rameswaram, Tamil Nadu, India.

The Study area is the sacred Ramanathasamy temple and selected for the characterization of physico-chemical parameters viz., pH, EC, TDS, Salinity, TA, TH, Ca( + 2), Mg( + 2), Chloride and Fluoride for 22 groundwater samples and the impact of pre- and post-monsoon on the groundwater quality was also studied. The study area is well known for the chronic fresh water shortage and the locals depend mostly on springs for their fresh water needs. The Water Quality Index (WQI) computed shows the transfer of samples under unacceptable quality to acceptable quality. The Langelier Saturation Index (LSI) reflected that majority of the samples have the tendency to form scale. The Karl Pearson correlation matrix has approved the maximum relationship of calcium and chloride with respect to the total dissolved solids (TDS). It is interesting to conclude that the groundwater in the study area has very hard nature, especially of non-carbonate type.

A seasonal quality assessment on potability of fresh shallow aquifers along the Rameswaram-Dhanushkodi coastal tract, India.

Rameswaram-Dhanushkodi coastal tract lies in the south-east of Rameswaram Island, which stretches about 20 km from the Rameswaram proper and occults several historic values. The objective of the present study is to investigate the water quality parameters viz., pH, electrical conductivity (EC), total dissolved solids (TDS), salinity (SAL), total alkalinity (TA), calcium hardness (CH), magnesium hardness (MH), total hardness (TH), chloride (Cl), and fluoride (F) during summer and winter seasons of the year 2006. The calculated Langelier Saturation Index values confirm the incrusting ability in most of the groundwater samples. The Water Quality Index values show that the potable quality of groundwater is improved from about 32% to 58%, especially in post-winter. The principal component analysis identifies the dominance of CH, TA, and TH with 33% and 44% in summer and winter, respectively. In addition, Cl is also having dominance in winter. The box plots have depicted asympathy in concentrations of F, TDS, and CH during winter, whereas sympathetic relationship in Cl and MH. Unlike in summer, a good correlation of Cl with the other parameters including SAL, EC, TDS, CH, and TH is observed in the winter.

Electrochemically Exfoliated Graphene for Nanosensor Applications.

Water dispersible graphene layer are the excellent nano materials used for wide range of electronic applications. High quality graphene was synthesized by an eco-friendly, easy and cost effective electrochemical exfoliation method. In this work, graphite rod was used both as an anode and cathode for the production of graphene. Potassium sulphate (K2SO4) was used as an intercalating agent. Electrochemically exfoliated graphene (EEG) was coated on glassy carbon electrode (GCE) and evaluated towards the electrochemical oxidation of vanillin and L-phenylalanine. The fabricated electrode was able to detect vanillin and L-Phenylalanine as low as 0.2 µM with signal to noise ratio of 3. A significant increase in the current was observed for the graphene coated electrode for both vanillin and L-phenylalanine when compared to bare Glassy electrode. The finding clearly demonstrated the higher detection capability, selectivity and reproducibility of EEG.

Tamarind (Tamarindus indica) fruit shell carbon: A calcium-rich promising adsorbent for fluoride removal from groundwater.

Tamarindus indica fruit shells (TIFSs) are naturally calcium rich compounds. They were impregnated with ammonium carbonate and then carbonized, leading to ammonium carbonate activated ACA-TIFS carbon. The resulting materials and carbon arising from virgin fruit shells V-TIFS were characterized and assayed as adsorbent for the removal of fluoride anions from groundwater. The fluoride scavenging ability of TIFS carbons was due to naturally dispersed calcium compounds. X-ray diffraction (XRD) showed that TIFS carbon contained a mixture of calcium oxalate and calcium carbonate. Batch studies on the fluoride removal efficiency of TIFS carbons with respect to contact time, pH, initial fluoride concentration, and co-ion interference were conducted. Applicability of various kinetic models (viz., pseudo-first-order, pseudo-second-order, intra-particle diffusion and Elovich) and sorption isotherms were tested for batch techniques. The fluoride removal capacity of TIFS carbons was found to be 91% and 83% at a pH of 7.05 for V-TIFS and ACA-TIFS carbons, respectively. The practical applicability of TIFS carbons using groundwater samples was approved. The fluoride removal was greater in groundwater without hydrogen carbonate ions than those containing these ions. The characterizations of fluoride unloaded and loaded TIFS carbons were done by SEM and XRD studies.

Fluoride removal from water using activated and MnO2-coated Tamarind Fruit (Tamarindus indica) shell: batch and column studies.

The present work is concerned with the defluoridation capacities of activated (ATFS) and MnO(2)-coated Tamarind Fruit Shell (MTFS), using batch and column sorption techniques. In the batch technique, the dynamics of fluoride sorption, with respect to pH, [F](o) and sorbent dose, was studied. The applicability of pseudo-first order for ATFS and Ritchie-second order for MTFS was observed. The kinetics data were found to fit well with Temkin isotherm for ATFS and Langmuir for MTFS. The interaction of co-ions in the defluoridation capacity of the sorbent was studied. Column experiments were carried out under a constant fluoride concentration of 2mg/l, flow rate and different bed depths. The capacities of the breakthrough and exhaustion points increased with increase in the bed depth for ATFS unlike MTFS. The Thomson model was applied to the column experimental results. The characterization of the sorbents, ATFS and MTFS, was done using the FTIR, SEM and XRD techniques.