RESUMO
The aims of the study were 1) to assess the suitability of selected amendments for reducing the mobility of metals in sediments by evaluating their effects on metal sorption capacity, and 2) to assess the ecotoxicity of sediment/amendment mixtures. Three different amendments were tested: cellulose waste, biochar, and dolomite. The efficiency of metal immobilization in mixtures was dependent on pH, which increased with concentrations of amendment. The higher negative charge observed for dolomite and cellulose waste corresponded with greater attraction of cations and enhanced metal sorption. For cellulose waste, the highest values of the Q parameter were attributed to the presence of OH groups, which corresponded with the highest immobilization of metals. Biochar reduced the negative surface charge, which highlights the importance of additional factors such as high specific surface area and volume of pores in metal immobilization. All amendments increased the SSA and VN2, indicating a higher number of sorption sites for metal immobilization. Most bioassays established a reduction of the ecotoxicity for amendments. Mixtures with dolomite (25%, 45% doses) and biochar (45% dose) were low toxic. Mixtures with cellulose waste were toxic or highly toxic. The mobility of metals from contaminated sediments can be limited by reused industry side products, which could contribute to further closing the circular economy loop.
Assuntos
Carvão Vegetal , Sedimentos Geológicos , Metais , Sedimentos Geológicos/química , Carvão Vegetal/química , Metais/toxicidade , Metais/química , Adsorção , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/químicaRESUMO
Enamel, dentin and cementum apatite has a complex composition. The lack of complete reports on the chemical composition of all tooth tissues together and the need to create a modern biomaterial that reproduces the correct ratio of individual tooth mineral components prompted the authors to undertake the research. A detailed evaluation of the micro- and macro-elements of tooth powder, using various methods of chemical analysis was conducted. All four groups of human sound teeth were crushed using the grinder. A fine powder was implemented for the FTIR (Fourier Transform Infrared Spectroscopy), ICP (Inductively Coupled Plasma Optical Emission Spectometry) and for the potentiometric titration, SEM and mercury porosimetry analyses. The obtained studies indicate that there is no significant correlation in chemical composition between the different teeth types. This proves that every removed, crushed tooth free of microorganisms can be a suitable material for alveolar augmentation. It is essential to know the chemical profiles of different elements in teeth to develop a new class of biomaterials for clinical applications.
Assuntos
Mercúrio , Minerais , Apatitas , Materiais Biocompatíveis , Humanos , Pós , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The Chelidonium majus plant is rich in biologically active isoquinoline alkaloids. These alkaline polar compounds are isolated from raw materials with the use of acidified water or methanol; next, after alkalisation of the extract, they are extracted using chloroform or dichloromethane. This procedure requires the use of toxic solvents. The present study assessed the possibility of using volatile natural deep eutectic solvents (VNADESs) for the efficient and environmentally friendly extraction of Chelidonium alkaloids. The roots and herb of the plant were subjected three times to extraction with various menthol, thymol, and camphor mixtures and with water and methanol (acidified and nonacidified). It has been shown that alkaloids can be efficiently isolated using menthol-camphor and menthol-thymol mixtures. In comparison with the extraction with acidified methanol, the use of appropriate VNADESs formulations yielded higher amounts of protopine (by 16%), chelidonine (35%), berberine (76%), chelerythrine (12%), and coptisine (180%). Sanguinarine extraction efficiency was at the same level. Additionally, the values of the contact angles of the raw materials treated with the tested solvents were assessed, and higher wetting dynamics were observed in the case of VNADESs when compared with water. These results suggest that VNADESs can be used for the efficient and environmentally friendly extraction of Chelidonium alkaloids.
Assuntos
Alcaloides , Chelidonium , Cânfora , Solventes Eutéticos Profundos , Isoquinolinas , Mentol , Metanol , Extratos Vegetais , Solventes , Timol , ÁguaRESUMO
Porosity is an important parameter for characterizing the microstructure of solids that corresponds to the volume of the void space, which may contain fluid or air, over the total volume of the material. Many materials of natural and technically manufactured origin have a large number of voids in their internal structure, relatively small in size, compared to the characteristic dimensions of the body itself. Thus, porosity is an important feature of industrial materials, but also of biological ones. The porous structure affects a number of material properties, such as sorption capacity, as well as mechanical, thermal, and electrical properties. Porosity of materials is an important factor in research on biomaterials. The most popular materials used to rebuild damaged tooth tissues are composites and ceramics, whilst titanium alloys are used in the production of implants that replace the tooth root. Research indicates that the most comprehensive approach to examining such materials should involve an analysis using several complementary methods covering the widest possible range of pore sizes. In addition to the constantly observed increase in the resolution capabilities of devices, the development of computational models and algorithms improving the quality of the measurement signal remains a big challenge.
Assuntos
Materiais Biocompatíveis/química , Materiais Dentários/química , Próteses e Implantes , Humanos , Teste de Materiais , PorosidadeRESUMO
The main goal of this work was to study the structural transformation of humic acids (HAs) under the influence of selected strains of fungi (Aspergillus niger and Paecilomyces lilacinus) and bacteria (Bacillus sp., Paenibacillus polymyxa and Bacillus amyloliquefaciens) with/without the presence of NPK fertilizers. Two-year experiments were conducted on two different soils and HAs isolated from these soils were examined for structure, humification degree, and quantity using fluorescence and UV-Vis spectroscopy, elemental analysis, and extraction methods. Results showed that the applied additives contributed to the beneficial transformation of HAs, but effects differed for various soils. HAs from silty soil with higher organic carbon content showed simplification of their structure, and decreases in humification, molecular weight, and aromaticity under the influence of fungi and bacteria without NPK, and with NPK alone. With both fungi and NPK, increases in O/H and O/C atomic ratios indicated an increase in the number of O-containing functional groups. HAs from sandy soil did not show as many significant changes as did those from silty soil. Sandy soil exhibited a strong decline in HA content in the second year that was reduced/neutralized by the presence of fungi, bacteria, and NPK. Periodically observed fluorescence at ~300 nm/450 nm reflected formation of low-molecular HAs originating from the activity of microorganisms.
Assuntos
Agricultura , Bactérias/efeitos dos fármacos , Fertilizantes/análise , Fungos/efeitos dos fármacos , Substâncias Húmicas/análise , Minerais/farmacologia , Solo/química , Fluorescência , Espectrofotometria UltravioletaRESUMO
Food preservatives are crucial in fruit production, but fungal resistance is a challenge. The main objective was to compare the sensitivity of Neosartorya spp. isolates to preservatives used in food security applications and to assess the role of metabolic properties in shaping Neosartorya spp. resistance. Sodium metabisulfite, potassium sorbate, sodium bisulfite and sorbic acid showed inhibitory effects, with sodium metabisulfite the most effective. Tested metabolic profiles included fungal growth intensity and utilization of amines and amides, amino acids, polymers, carbohydrates and carboxylic acids. Significant decreases in the utilization of all tested organic compound guilds were observed after fungal exposure to food preservatives compared to the control. Although the current investigation was limited in the number of predominately carbohydrate substrates and the breadth of metabolic responses, extensive sensitivity panels are logical step in establishing a course of action against spoilage agents in food production being important approach for innovative food chemistry.
Assuntos
Contaminação de Alimentos , Conservantes de Alimentos , Conservantes de Alimentos/farmacologia , Conservantes de Alimentos/química , Contaminação de Alimentos/análise , Neosartorya/metabolismo , Neosartorya/química , Neosartorya/crescimento & desenvolvimento , MetabolomaRESUMO
Fungi belonging to the genus Neosartorya (teleomorph of Aspergillus spp.) are of great concern in the production and storage of berries and fruit-based products, mainly due to the production of thermoresistant ascospores that cause food spoilage and possible secretion of mycotoxins. We initially tested the antifungal effect of six natural extracts against 20 isolates of Neosartorya spp. using a traditional inhibition test on Petri dishes. Tested isolates did not respond uniformly, creating 5 groups of descending sensitivity. Ten isolates best representing of the established sensitivity clusters were chosen for further investigation using a Biolog™ MT2 microplate assay with the same 6 natural extracts. Additionally, to test for metabolic profile changes, we used a Biolog™ FF microplate assay after pre-incubation with marigold extract. All natural extracts had an inhibitory effect on Neosartorya spp. growth and impacted its metabolism. Lavender and tea tree oil extracts at a concentration of 1000 µg mL-1 presented the strongest antifungal effect during the inhibition test, however all extracts exhibited inhibitory properties at even the lowest dose (5 µg mL-1). The fungal stress response in the presence of marigold extract was characterized by a decrease of amino acids and carbohydrates consumption and an uptake of carboxylic acids on the FF microplates, where the 10 studied isolates also presented differences in their innate resilience, creating 3 distinctive sensitivity groups of high, average and low sensitivity. The results confirm that natural plant extracts and essential oils inhibit and alter the growth and metabolism of Neosartorya spp. suggesting a possible future use in sustainable agriculture as an alternative to chemical fungicides used in traditional crop protection.
Assuntos
Antifúngicos , Neosartorya , Antifúngicos/farmacologia , Antifúngicos/metabolismo , Aspergillus/metabolismo , Extratos Vegetais/farmacologia , Extratos Vegetais/metabolismo , Metaboloma , Testes de Sensibilidade MicrobianaRESUMO
Research on the structure and chemical composition of dental tissues allows for the optimisation of materials used in the treatment and care of teeth. Understanding pathological processes occurring in dental tissues and their reactions to various substances, including dental materials, are crucial for the development of new dental technologies. The aim of the study was to check the similarities in the chemical and morphological structure of enamel and dentine powders in various groups of permanent teeth, as well as differential chemical analysis for both grinded tissues tested. The extracted non-carious and non-pathological human permanent teeth were divided into four groups: incisors, canines, premolars and molars. Each tooth was sectioned to thick slices. Enamel and dentine were mechanically separated and ground in an agate mortar and pestle. FT-Raman and FTIR spectroscopy methods were used for the analysis of biological tissues. SEM method was applied to visualise hard dental tissues structures present on the surface and within the particles. The morphological structures were the same within the analysed tissues and did not depend on the analysed group of teeth. A comparison of the mineral-to-organic ratios of enamel and dentine in each tooth group showed that the bands related to PO43- were clearly higher in content for enamel than for dentine. Higher absorbance measured at the region of 2800-3700 cm-1 and at 1500-1800 cm-1 for dentine as compared to enamel samples were indicative of a higher content of organic structures. The highest contribution of phosphates was in canine enamel samples.The studies showed that the carbonate-to-phosphate ratio was higher for dentine (0.20 - 0.48) compared to the values obtained for enamel (0.13 - 0.22), however, minor differences were found in each group of enamel or dentine samples. The lack of significant differences between the enamel and dentine powders of incisors, canines, premolars and molars may prove that each extracted tooth, regardless of the tooth group, is an excellent substrate for their substitution.
Assuntos
Dentina , Dente Molar , Humanos , Dentina/química , Esmalte DentárioRESUMO
Polycyclic aromatic hydrocarbons (PAHs) tend to accumulate in the sediment due to their high hydrophobicity. Despite PAHs have been the subject of several reviews, PAH sorption processes in bottom sediments has not been comprehensively discucorrelation coefficients between sorption parameters and contessed. Understanding the dependencies governing PAH sorption processes will allow to predict, monitor, and mitigate the ecological effects of PAH contamination and the associated risks to humans or wildlife. The objectives of the study were to assess the relationship between the sorption properties and the content of PAHs in bottom sediments and mussels. The PAH profile was dominated by higher-molecular hydrocarbons, which accounted for 73% of the total concentration of PAHs. Potentiometric studies revealed the steric-based PAH sorption mechanism that strongly depended on the presence of negatively dissociating structures such as carboxylic or phenolic functional groups. Based on the changes in Q8 values, the size-exclusion effect was more likely for 5- and 6-ring compounds. Pores < 5 µm, which had the largest share in the specific surface area, were the preferred sites for PAH sequestration and stabilization in bottom sediments. The availability of PAHs was reduced in sediments with high organic matter content. The PAH bioaccumulation factor significantly decreased with increasing TOC content in sediments. Higher mortality and growth inhibition of H. incongruens were observed in samples with high and medium TOC contents than in those with low TOC content.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Poluentes Químicos da Água , Humanos , Hidrocarbonetos Policíclicos Aromáticos/análise , Sedimentos Geológicos/química , Bioacumulação , Poluentes Químicos da Água/química , Adsorção , Monitoramento AmbientalRESUMO
This paper presents a detailed analysis to directly compare the morphology and chemistry of human tooth layers using advanced scanning electron microscopy (SEM) techniques together with supporting data from energy dispersive spectroscopy (EDS) measurements. The aim of this study was to visualise and evaluate the structural and microanalytical differences of the mineralised hard tissues of human teeth. The extracted sound teeth without any pathologies were divided into the following groups: incisors, canines, premolars, and molars. Tooth samples were broken vertically to preserve the primary structures and to visualise individual tooth tissues. Specimens were also used to find variations in the elemental composition of tissues for different tooth groups. The average thickness of the enamel in the tooth groups studied was 1.1 mm and the average width of the enamel prisms was 4.2 µm, with the highest values observed for molars. The analysis of the chemical composition of the enamel showed that Ca and P were among the predominant elements. The average dentine thickness was 1.87 mm, with the highest values determined for molars, and the lowest for canines. The width of the dentinal tubules was less than 2 µm, for molars being significantly smaller. The analysis of the chemical composition of the dentine showed the highest O content of the all tooth tissues analyzed, while a lower P and Ca content was observed compared to the enamel. The cementum thickness averaged 0.14 mm, with the highest values observed for molars and the lowest for incisors. The analysis of the chemical composition of the cementum showed the lowest average O and P content, and the highest average C and N content, compared to the enamel and the dentine. Increasingly accurate imaging and analysis of dental hard tissue structures provides the opportunity for multifactorial evaluation in terms of their clinical application.
Assuntos
Cemento Dentário , Dentina , Humanos , Dentina/química , Dente Molar , Microscopia Eletrônica de Varredura , Esmalte DentárioRESUMO
The sorption mechanisms of the trace elements in bottom sediment are not fully understood. The study aim was to analyse the effect sorption capacity of bottom sediments on the content of trace elements and the bottom sediment ecotoxicity. The study found higher content of trace elements caused higher potential toxicity of bottom sediments. However, the PCA analysis indicated that ecotoxicity to Heterocypris incongruens was not related to the trace element content in the sediments. It was found that some of the physicochemical properties of bottom sediments determine the behavior of the test organism. The study revealed a strong relationships between the properties of bottom sediments and trace element sorption, which results from significant differences in the carbonate and organic matter contents. The obtained relationships showed a significant role in trace element sorption of negatively dissociating functional groups (carboxyl, phenolic, alcohol, and carbonyl groups) of Cha, Cfa, Cnh and DOC fraction and of clay minerals. Positive correlation between the metal content and the volume of ultramicropores, cryptopores and residual pores suggest that these pore groups contain reactive sites capable of effective element sorption. In contrast, larger pores turned out to be of marginal importance in trace elements sorption, probably participating only in their migration within the bottom sediment structure. An understanding of the above factors will provide comprehensive information on the fate of trace elements in aquatic systems.
Assuntos
Oligoelementos , Poluentes Químicos da Água , Animais , Crustáceos , Monitoramento Ambiental , Sedimentos Geológicos , Metais/análise , Oligoelementos/análise , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/toxicidadeRESUMO
Knowledge on the effects of minerals on soil water stability and wettability is mostly gained from experiments on natural soils of different mineral composition. To gain a "clearer" picture, the water stability and wettability of artificial aggregates composed of soil silt and various proportions of pure minerals: kaolinite, montmorillonite, illite, zeolite and goethite, were examined. The wettability was attributed to contact angles measured goniometrically and to the water drop penetration time (WDPT). The water stability was measured by monitoring of air bubbling after aggregate immersion in water and the shrinking sphere model was used to analyse aggregates' destruction kinetics. The rate of aggregate destruction in water increased with increasing mineral content and it slightly decreased for aggregates composed of all pure minerals except goethite. An apparent hydrophobicity period (a period where the bubbling stopped for some time), resulted most probably from the wavy shape of pores, was observed mainly for aggregates with low mineral proportions. Among all studied minerals, kaolinite increased the water contact angle and water repellency to the greatest extent. With increasing the mineral content in the aggregates up to 8%, contact angles decreased and then increased. Contact angles did not correlate with aggregates' stability. Aggregates more rapidly penetrated by water (shorter WDPT) were destroyed faster. Water stability of aggregates containing all minerals except illite appeared to be higher for the more mechanically resistant aggregates.
RESUMO
The research subject was the analysis of the microstructure, barrier properties, and mechanical resistance of the psyllium husk (PH)-modified thermoplastic starch films. The tensile tests under various static loading conditions were not performed by researchers for this type of material before and are essential for a more precise assessment of the material's behavior under the conditions of its subsequent use. The film samples were manufactured by the casting method. PH addition improved starch gelatinization and caused a decrease in failure strain by 86% and an increase in failure stress by 48% compared to pure films. Fourier transform infrared spectroscopy results showed the formation of additional hydrogen bonds between polysaccharides in starch and PH. An increase in the number of hydrophilic groups in the modified films resulted in a faster contact angle decrease (27.4% compared to 12.8% for pure ones within the first 5 s); however, it increased the energy of water binding and surface complexity. The modified films showed the opacity at 600 nm, 43% higher than in the pure starch film, and lower transmittance, suggesting effectively improving barrier properties to UV light, a potent lipid-oxidizing agent in food systems.
RESUMO
The investigations on the response of bone tissue under different loading conditions are important from clinical and engineering points of view. In this paper, the influence of nesfatin-1 administration on rat humerus mechanical properties was analyzed. The classical three-point bending and impact tests were carried out for three rat bone groups: control (SHO), the humerus of animals under the conditions of established osteopenia (OVX), and bones of rats receiving nesfatin-1 after ovariectomy (NES). The experiments proved that the bone strength parameters measured under various mechanical loading conditions increased after the nesfatin-1 administration. The OVX bones were most susceptible to deformation and had the smallest fracture toughness. The SEM images of humerus fracture surface in this group showed that ovariectomized rats had a much looser bone structure compared to the SHO and NES females. Loosening of the bone structure was also confirmed by the densitometric and qualitative EDS analysis, showing a decrease in the OVX bones' mineral content. The samples of the NES group were characterized by the largest values of maximum force obtained under both quasi-static and impact conditions. The energies absorbed during the impact and the critical energy for fracture (from the three-point bending test) were similar for the SHO and NES groups. Statistically significant differences were observed between the mean Fi max values of all analyzed sample groups. The obtained results suggest that the impact test was more sensitive than the classical quasi-static three-point bending one. Hence, Fi max could be used as a parameter to predict bone fracture toughness.
RESUMO
Structure and strength are responsible for soil physical properties. This paper determines in a uniaxial compression test the strength of artificial soils containing different proportions of various clay-size minerals (cementing agents) and silt-size feldspar/quartz (skeletal particles). A novel empirical model relating the maximum stress and the Young's modulus to the mineral content basing on the Langmuir-type curve was proposed. By using mercury intrusion porosimetry (MIP), bulk density (BD), and scanning electron microscopy (SEM), structural parameters influencing the strength of the soils were estimated and related to mechanical parameters. Size and shape of particles are considered as primary factors responsible for soil strength. In our experiments, the soil strength depended primarily on the location of fine particles in respect to silt grains and then, on a mineral particle size. The surface fractal dimension of mineral particles played a role of a shape parameter governing soil strength. Soils containing minerals of higher surface fractal dimensions (rougher surfaces) were more mechanically resistant. The two latter findings appear to be recognized herein for the first time.
RESUMO
The spatial arrangement and pore size distribution play an important role in accumulation and protection of exogenous organic matter (EOM) in the soil, but how different organic materials contribute to modify pore structure is poorly understood. We aimed at exploring possible changes in the complexity of the soil phase during fertilization with different doses of digestate and sludges sourced from the agro-food industry. For this purpose, the short-term effects-one year, of soil fertilization, were investigated in several sampling periods and within two depths (0-25 cm and 25-40 cm). Changes in the specific surface area (SSA), total pore volume (VMIP), total pore area (SMIP), average pore radius (RMIP) and pore size distribution (PSD) were monitored using N2 adsorption/desorption (NAD) and mercury porosimetry (MIP) methods. Our results showed that the intensity of observed changes depended on the type and dose of organic material, soil depth and sampling date. Accumulation of EOM increased with soil depth, masking a large proportion of SSA. Deeper soil layer was more susceptible to changes in the pore size distributions due to the formation of new elongated pores. We concluded that this specific structural porosity was related to the decomposition of organic matter during the formation of soil aggregates.
Assuntos
Agricultura/métodos , Fertilizantes/análise , Solo/química , Adsorção , Indústria Alimentícia , Mercúrio/química , Nitrogênio/química , Porosidade , Esgotos/químicaRESUMO
Thermogravimetry-coupled with differential scanning calorimetry, quadrupole mass spectrometry, and Fourier-transform infrared spectroscopy (TG-DSC-QMS-FTIR)-was applied to monitor the thermal stability (in an N2 pyrolytic atmosphere) and chemical properties of natural polymers, fulvic (FA) and humic acids (HA), isolated from chemically different soils. Three temperature ranges, R1, 40-220°C; R2, 220-430°C; and R3, 430-650°C, were distinguished from the DSC data, related to the main thermal processes of different structures (including transformations without weight loss). Weight loss (ΔM) estimated from TG curves at the above temperature intervals revealed distinct differences within the samples in the content of physically adsorbed water (at R1), volatile and labile functional groups (at R2) as well as recalcitrant and refractory structures (at R3). QMS and FTIR modules enabled the chemical identification (by masses and by functional groups, respectively) of gaseous species evolved during thermal decomposition at R1, R2 and R3. Variability in shape, area and temperature of TG, DSC, QMS and FTIR peaks revealed differences in thermal stability and chemical structure of the samples between the FAs and HAs fractions of different origin. The statistical analysis showed that the parameters calculated from QMS (areas of m/z = 16, 17, 18, 44), DSC (MaxDSC) and TG (ΔM) at R1, R2 and R3 correlated with selected chemical properties of the samples, such as N, O and COOH content as well as E2/E6 and E2/E4 indexes. This indicated a high potential for the coupled method to monitor the chemical changes of humic substances. A new humification parameter, HTD, based on simple calculations of weight loss at specific temperature intervals proved to be a good alternative to indexes obtained from other methods. The above findings showed that the TG-DSC-QMS-FTIR coupled technique can represent a useful tool for the comprehensive assessment of FAs and HAs properties related to their various origin.