A Well-defined Magnesium Complex of C706.

Controlling and understanding charge state and metal coordination in carbon nanomaterials is crucial to harnessing their unique properties. Here we describe the synthesis of the well-defined fulleride complex [{(Mesnacnac)Mg}6C70], 2, (Mesnacnac) = HC(MeCNMes)2, Mes = 2,4,6-Me3C6H2, from the reaction of the ß-diketiminate magnesium(I) complex [{(Mesnacnac)Mg}2] with C70 in aromatic solvents. The molecular structure of complex 2 was determined, providing the first high-quality structural study of a complex with the C706- ion. In combination with solution state NMR spectroscopic and DFT computational studies, the changes in geometry and charge distribution in the various atom and bond types of the fulleride unit were investigated. Additionally, the influence of the (Mesnacnac)Mg+ cations on the global and local fulleride coordination environment was examined.

Synthesis and Structural Studies of peri-Substituted Acenaphthenes with Tertiary Phosphine and Stibine Groups.

Two mixed peri-substituted phosphine-chlorostibines, Acenap(PiPr2)(SbPhCl) and Acenap(PiPr2)(SbCl2) (Acenap = acenaphthene-5,6-diyl) reacted cleanly with Grignard reagents or nBuLi to give the corresponding tertiary phosphine-stibines Acenap(PiPr2)(SbRR') (R, R' = Me, iPr, nBu, Ph). In addition, the Pt(II) complex of the tertiary phosphine-stibine Acenap(PiPr2)(SbPh2) as well as the Mo(0) complex of Acenap(PiPr2)(SbMePh) were synthesised and characterised. Two of the phosphine-stibines and the two metal complexes were characterised by single-crystal X-ray diffraction. The peri-substituted species act as bidentate ligands through both P and Sb atoms, forming rather short Sb-metal bonds. The tertiary phosphine-stibines display through-space J(CP) couplings between the phosphorus atom and carbon atoms bonded directly to the Sb atom of up to 40 Hz. The sequestration of the P and Sb lone pairs results in much smaller corresponding J(CP) being observed in the metal complexes. QTAIM (Quantum Theory of Atoms in Molecules) and EDA-NOCV (Energy Decomposition Analysis employing Naturalised Orbitals for Chemical Valence) computational techniques were used to provide additional insight into a weak n(P)→σ*(Sb-C) intramolecular bonding interaction (pnictogen bond) in the phosphine-stibines.

Ligand Hydrogenation during Hydroformylation Catalysis Detected by In Situ High-Pressure Infra-Red Spectroscopic Analysis of a Rhodium/Phospholene-Phosphite Catalyst.

Phospholane-phosphites are known to show highly unusual selectivity towards branched aldehydes in the hydroformylation of terminal alkenes. This paper describes the synthesis of hitherto unknown unsaturated phospholene borane precursors and their conversion to the corresponding phospholene-phosphites. The relative stereochemistry of one of these ligands and its Pd complex was assigned with the aid of X-ray crystal structure determinations. These ligands were able to approach the level of selectivity observed for phospholane-phosphites in the rhodium-catalysed hydroformylation of propene. High-pressure infra-red (HPIR) spectroscopic monitoring of the catalyst formation revealed that whilst the catalysts showed good thermal stability with respect to fragmentation, the C=C bond in the phospholene moiety was slowly hydrogenated in the presence of rhodium and syngas. The ability of this spectroscopic tool to detect even subtle changes in structure, remotely from the carbonyl ligands, underlines the usefulness of HPIR spectroscopy in hydroformylation catalyst development.

Conjugation-Modulated Excitonic Coupling Brightens Multiple Triplet Excited States.

The design and regulation of multiple room-temperature phosphorescence (RTP) processes are formidably challenging due to the restrictions imposed by Kasha's rule. Here, we report a general design principle for materials that show multiple RTP processes, which is informed by our study of four compounds where there is modulation of the linker hybridization between donor (D) and acceptor (A) groups. Theoretical modeling and photophysical experiments demonstrate that multiple RTP processes can be achieved in sp3 C-linked D-A compounds due to the arrest of intramolecular electronic communication between two triplet states (T1H and T1L) localized on the donor and acceptor or between two triplet states, one localized on the donor and one delocalized across aggregated acceptors. However, for the sp2 C-linked D-A counterparts, RTP from one locally excited T1 state is observed because of enhanced excitonic coupling between the two triplet states of molecular subunits. Single-crystal and reduced density gradient analyses reveal the influence of molecular packing on the coincident phosphorescence processes and the origin of the observed aggregate phosphorescence. These findings provide insights into higher-lying triplet excited-state dynamics and into a fundamental design principle for designing compounds that show multiple RTP.

Probing Regio- and Enantioselectivity in the Formal [2 + 2] Cycloaddition of C(1)-Alkyl Ammonium Enolates with ß- and α,ß-Substituted Trifluoromethylenones.

The isothiourea-catalyzed regio- and enantioselective formal [2 + 2] cycloaddition of C(1)-alkyl and C(1)-unsubstituted ammonium enolates with ß- and α,ß-substituted trifluoromethylenones has been developed. In all cases, preferential [2 + 2]-cycloaddition over the alternative [4 + 2]-cycloaddition is observed, giving ß-lactones with excellent diastereo- and enantioselectivity (34 examples, up to >95:5 dr, >99:1 er). The regioselectivity of the process was dictated by the nature of the substituents on both reaction components. Solely [2 + 2] cycloaddition products are observed when using α,ß-substituted trifluoromethylenones or α-trialkylsilyl acetic acid derivatives; both [2 + 2] and [4 + 2] cycloaddition products are observed when using ß-substituted trifluoromethylenones and α-alkyl-α-trialkylsilyl acetic acids as reactants, with the [2 + 2] cycloaddition as the major reaction product. The beneficial role of the α-silyl substituent within the acid component in this protocol has been demonstrated by control experiments.

Low-Coordinate Magnesium Sulfide and Selenide Complexes.

The reactions of [{(iPrDipNacNac)Mg}2] 1 (iPrDipnacnac = HC(iPrCNDip)2) with Ph3P═O at 100 °C afforded the phosphinate complex [(iPrDipNacNac)Mg(OPPh3)(OPPh2)] 3. Reactions of 1 with Ph3P═E (E = S, Se) proceeded rapidly at room temperature to low-coordinate chalcogenide complexes [{(iPrDipNacNac)Mg}2(µ-S)] 4 and [{(iPrDipNacNac)Mg}2(µ-Se)] 5, respectively. Similarly, reactions of RNHC═S ((MeCNR)2C═S with R = Me, Et, or iPr) with 1 afforded NHC adducts of magnesium sulfide complexes, [{(iPrDipNacNac)Mg(RNHC)}(µ-S){Mg(iPrDipNacNac)}] 6, that could alternatively be obtained by adding the appropriate RNHC to sulfide complex 4. Complex 4 reacted with 1-adamantylazide (AdN3) to give [{(iPrDipNacNac)Mg}2(µ-SN3Ad)] 7 and can form various simple donor adducts in solution, of which [(iPrDipNacNac)Mg(OAd)}2(µ-S)] 8a (OAd = 2-adamantanone) was structurally characterized. The nature of the ionic Mg-E-Mg unit is described by solution and solid-state studies of the complexes and by DFT computational investigations.

Enhanced Photoluminescence and Reduced Dimensionality via Vacancy Ordering in a 10H Halide Perovskite.

Vacancy-ordered halide perovskites have received great interest in optoelectronic applications. In this work, we report the novel inorganic halide Cs10MnSb6Cl30 with a distinctive 10H (10-layer hexagonal) perovskite polytype structure with (hcccc)2 stacking. Cs10MnSb6Cl30 has 30% B-site vacancies ordered at both corner- and face-sharing sites, resulting in [MnSb6Cl30]10-n columns, i.e., a reduction of octahedral connectivity to 1D. This results in enhanced photoluminescence in comparison to the previously reported 25% vacancy-ordered 3C polytype Cs4MnSb2Cl12 with 2D connectivity. This demonstrates not only the existence of the 10H perovskite structure in halides but also demonstrates the degree of B-site deficiency and stacking sequence variation as a direction to tune the optical properties of perovskite polytypes via vacancy rearrangements.

[AuIII(N

A series of new complexes of general formula [AuIII(N^N)Br2](PF6) (N^N = 2,2'-bipyridine and 1,10-phenanthroline derivatives) were prepared and characterized by spectroscopic, electrochemical, and diffractometric techniques and tested against Gram-positive and Gram-negative bacterial strains (Staphylococcus aureus, Streptococcus intermedius, Pseudomonas aeruginosa, and Escherichia coli), showing promising antibacterial and antibiofilm properties.

Phosphine and Selenoether peri-Substituted Acenaphthenes and Their Transition-Metal Complexes: Structural and NMR Investigations.

A series of peri-substituted acenaphthene-based phosphine selenoether bidentate ligands Acenap(iPr2P)(SeAr) (L1-L4, Acenap = acenaphthene-5,6-diyl, Ar = Ph, mesityl, 2,4,6-trisopropylphenyl and supermesityl) were prepared. The rigid acenaphthene framework induces a forced overlap of the phosphine and selenoether lone pairs, resulting in a large magnitude of through-space 4JPSe coupling, ranging from 452 to 545 Hz. These rigid ligands L1-L4 were used to prepare a series of selected late d-block metals, mercury, and borane complexes, which were characterized, including by multinuclear NMR and single-crystal X-ray diffraction. The Lewis acidic motifs (BH3, Mo(CO)4, Ag+, PdCl2, PtCl2, and HgCl2) bridge the two donor atoms (P and Se) in all but one case in the solid-state structures. Where the bridging motif contained NMR-active nuclei (11B, 107Ag, 109Ag, 195Pt, and 199Hg), JPM and JSeM couplings are observed directly, in addition to the altered JPSe in the respective NMR spectra. The solution NMR data are correlated with single-crystal diffraction data, and in the case of mercury(II) complexes, they are also correlated with the solid-state NMR data and coupling deformation density calculations. The latter indicate that the through-space interaction dominates in free L1, while in the L1HgCl2 complex, the main coupling pathway is via the metal atom and not through the carbon framework of the acenaphthene ring system.

Synthesis of mono-nitroxides and of bis-nitroxides with varying electronic through-bond communication.

Nitroxides are a unique class of persistent radicals finding a wide range of applications, from spin probes to polarizing agents, and recently bis-nitroxides have been used as proof-of-concept molecules for quantum information processing. Here we present the syntheses of pyrroline-based nitroxide (NO) radicals and give a comparision of two possible synthetic routes to form two key intermediates, namely 2,2,5,5-tetramethylpyrroline-1-oxyl-3-acetylene (TPA) and 1-oxyl-2,2,5,5-tetramethylpyrroline-3-carboxylic acid (TPC). TPC and TPA were then used as precursors for the synthesis of three model compounds featuring two distant NO groups with a variable degree of conjugation and thus electronic communication between them. Using relatively facile synthetic routes, we produced a number of mono- and bis-nitroxides with the structures of multiple compounds unambiguously characterized by X-ray crystallography, while Continuous Wave Electron Paramagnetic Resonance (CW-EPR) allowed us to quantify the electronic communication in the bis-nitroxides. Our study expands the repertoire of mono- and bis-nitroxides with possibilities of exploiting them for studying quantum coherence effects and as polarizing agents.

New Chemistry of Chiral 1,3-Dioxolan-4-Ones.

(2S,5S)-5-Phenyl-2-t-butyl-1,3-dioxolan-4-one, readily derived from mandelic acid, undergoes the Michael addition to butenolide and 4-methoxy-ß-nitrostyrene with the absolute configuration of the products confirmed by X-ray diffraction in each case. In the former case, thermal fragmentation gives the phenyl ketone, thus illustrating use of the dioxolanone as a chiral benzoyl anion equivalent. The Diels-Alder cycloaddition chemistry of (2S)-5-methylene-2-t-butyl-1,3-dioxolan-4-one, derived from lactic acid, has been further examined with the X-ray structures of four adducts determined. In one case, thermal fragmentation of the adduct gives a chiral epoxy ketone resulting from the dioxolanone acting as a chiral ketene equivalent, while in others the products give insight into the mechanism of the dioxolanone fragmentation process.

Constrained Phosphine Chalcogenide Selenoethers Supported by peri-Substitution.

A series of phosphorus and selenium peri-substituted acenaphthene species with the phosphino group oxidized by O, S, and Se has been isolated and fully characterized, including by single-crystal X-ray diffraction. The P(V) and Se(II) systems showed fluxional behavior in solution due to the presence of two major rotamers, as evidenced with solution NMR spectroscopy. Using Variable-Temperature NMR (VT NMR) and supported by DFT (Density Functional Theory) calculations and solid-state NMR, the major rotamers in the solid and in solution were identified. All compounds showed a loss of the through-space JPSe coupling observed in the unoxidized P(III) and Se(II) systems due to the sequestration of the lone pair of the phosphine, which has been previously identified as the major contributor to the coupling pathway.

Thermal Rearrangement of Thiocarbonyl-Stabilised Triphenylphosphonium Ylides Leading to (Z)-1-Diphenylphosphino-2-(phenylsulfenyl)alkenes and Their Coordination Chemistry.

While thiocarbonyl-stabilised phosphonium ylides generally react upon flash vacuum pyrolysis by the extrusion of Ph3PS to give alkynes in an analogous way to their carbonyl-stabilised analogues, two examples with a hydrogen atom on the ylidic carbon are found to undergo a quite different process. The net transfer of a phenyl group from P to S gives (Z)-configured 1-diphenylphosphino-2-(phenylsulfenyl)alkenes in a novel isomerisation process via intermediate λ5-1,2-thiaphosphetes. These prove to be versatile hemilabile ligands with a total of seven complexes prepared involving five different transition metals. Four of these are characterised by X-ray diffraction with two involving the bidentate ligand forming a five-membered ring metallacycle and two with the ligand coordinating to the metal only through phosphorus.

Room-Temperature Multiple Phosphorescence from Functionalized Corannulenes: Temperature Sensing and Afterglow Organic Light-Emitting Diode.

Corannulene-derived materials have been extensively explored in energy storage and solar cells, however, are rarely documented as emitters in light-emitting sensors and organic light-emitting diodes (OLEDs), due to low exciton utilization. Here, we report a family of multi-donor and acceptor (multi-D-A) motifs, TCzPhCor, TDMACPhCor, and TPXZPhCor, using corannulene as the acceptor and carbazole (Cz), 9,10-dihydro-9,10-dimethylacridine (DMAC), and phenoxazine (PXZ) as the donor, respectively. By decorating corannulene with different donors, multiple phosphorescence is realized. Theoretical and photophysical investigations reveal that TCzPhCor shows room-temperature phosphorescence (RTP) from the lowest-lying T1 ; however, for TDMACPhCor, dual RTP originating from a higher-lying T1 (T1 H ) and a lower-lying T1 (T1 L ) can be observed, while for TPXZPhCor, T1 H -dominated RTP occurs resulting from a stabilized high-energy T1 geometry. Benefiting from the high-temperature sensitivity of TPXZPhCor, high color-resolution temperature sensing is achieved. Besides, due to degenerate S1 and T1 H states of TPXZPhCor, the first corannulene-based solution-processed afterglow OLEDs is investigated. The afterglow OLED with TPXZPhCor shows a maximum external quantum efficiency (EQEmax ) and a luminance (Lmax ) of 3.3 % and 5167 cd m-2 , respectively, which is one of the most efficient afterglow RTP OLEDs reported to date.

A Deep-Blue-Emitting Heteroatom-Doped MR-TADF Nonacene for High-Performance Organic Light-Emitting Diodes.

We present a p- and n-doped nonacene compound, NOBNacene, that represents a rare example of a linearly extended ladder-type multiresonant thermally activated delayed fluorescence (MR-TADF) emitter. This compound shows efficient narrow deep blue emission, with a λPL of 410 nm, full width at half maximum, FWHM, of 38 nm, photoluminescence quantum yield, ΦPL of 71 %, and a delayed lifetime, τd of 1.18 ms in 1.5 wt % TSPO1 thin film. The organic light-emitting diode (OLED) using this compound as the emitter shows a comparable electroluminescence spectrum peaked at 409 nm (FWHM=37 nm) and a maximum external quantum efficiency (EQEmax ) of 8.5 % at Commission Internationale de l'Éclairage (CIE) coordinates of (0.173, 0.055). The EQEmax values were increased to 11.2 % at 3 wt % doping of the emitter within the emissive layer of the device. At this concentration, the electroluminescence spectrum broadened slightly, leading to CIE coordinates of (0.176, 0.068).

A Versatile Palladium Synthon: [Pd(NHC)(PhC≡CPh)].

The synthesis and isolation of [Pd(NHC)(PhC≡CPh)] complexes are reported. These new 14-electron Pd(0)-complexes are key synthons leading to known palladium(0) and palladium(II) species, as well as permitting access to unprecedented mixed NHC-phosphite palladium(0) complexes. This motif permits the facile catalytic hydrosilylation of allenes. DFT calculations have allowed the characterization of the relatively weak interaction between the metal and the diphenylacetylene ligand, with a comparison with a series of ligands with more or less coordinating power, bearing varied structural and electronic properties.

Asymmetric Synthesis of Heterocyclic Chloroamines and Aziridines by Enantioselective Protonation of Catalytically Generated Enamines.

We report a method for the synthesis of chiral vicinal chloroamines via asymmetric protonation of catalytically generated prochiral chloroenamines using chiral Brønsted acids. The process is highly enantioselective, with the origin of asymmetry and catalyst substituent effects elucidated by DFT calculations. We show the utility of the method as an approach to the synthesis of a broad range of heterocycle-substituted aziridines by treatment of the chloroamines with base in a one-pot process, as well as the utility of the process to allow access to vicinal diamines.

Access to Diarylmethanols by Wittig Rearrangement of ortho-, meta-, and para-Benzyloxy-N-Butylbenzamides.

The N-butyl amide group, CONHBu, has been found to be an effective promoter of the [1,2]-Wittig rearrangement of aryl benzyl ethers and thus allow the two-step synthesis of isomerically pure substituted diarylmethanols starting from simple hydroxybenzoic acid derivatives. The method is compatible with a wide range of functional groups including methyl, methoxy, and fluoro, although not with nitro and, unexpectedly, is applicable to meta as well as ortho and para isomeric series.

Total Synthesis of (±)-Aspidospermidine, (±)-Aspidofractinine, (±)-Limaspermidine, and (±)-Vincadifformine via a Cascade and Common Intermediate Strategy.

A concise strategy for the total synthesis of several Aspidosperma alkaloids is reported. A Suzuki-Miyaura cross-coupling provides access to a 2-vinyl indole that undergoes a Diels-Alder cascade reaction with butyn-2-one to deliver a pyrroloindoline intermediate. This undergoes cascade amidation, reduction, skeletal rearrangement, and intramolecular Michael addition to provide a common intermediate containing the full framework of the Aspidosperma alkaloids. The utility of this intermediate is shown in the synthesis of four different natural products.

Non-Calcined Layer-Pillared Mn0.5Zn0.5 Bimetallic-Organic Framework as a Promising Electrocatalyst for Oxygen Evolution Reaction.

Electrocatalytic generation of oxygen is of great significance for sustainable, clean, and efficient energy production. Multiple electron transfer in oxygen evolution reaction (OER) and its slow kinetics represent a serious hedge for efficient water splitting, requiring the design and development of advanced electrocatalysts with porous structures, high surface areas, abundant electroactive sites, and low overpotentials. These requisites are common for metal-organic frameworks (MOFs) and derived materials that are promising electrocatalysts for OER. The present work reports on the synthesis and full characterization of a heteroleptic 3D MOF, [Zn2(µ4-odba)2(µ-bpdh)]n·nDMF (Zn-MUM-1), assembled from 4,4'-oxydibenzoic acid and 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene (bpdh). Besides, a series of heterometallic MnZn-MUM-1 frameworks (abbreviated as Mn0.5Zn0.5-MUM-1, Mn0.66Zn0.33-MUM-1, and Mn0.33Zn0.66-MUM-1) was also prepared, characterized, and used for the fabrication of working electrodes based on Ni foam (NF), followed by their exploration in OER. These noble-metal-free and robust electrocatalysts are stable and do not require pyrolysis or calcination while exhibiting better electrocatalytic performance than the parent Zn-MUM-1/NF electrode. The experimental results show that the Mn0.5Zn0.5-MUM-1/NF electrocatalyst features the best OER activity with a low overpotential (253 mV at 10 mA cm-2) and Tafel slope (73 mV dec-1) as well as significant stability after 72 h or 6000 cycles. These excellent results are explained by a synergic effect of two different metals present in the Mn-Zn MOF as well as improved charge and ion transfer, conductivity, and stability characteristics. The present study thus widens the application of heterometallic MOFs as prospective and highly efficient electrocatalysts for OER.