The "Bankart knee": high-grade impression fractures of the posterolateral tibial plateau lead to increased translational and anterolateral rotational instability of the ACL-deficient knee.

PURPOSE: The aim of this biomechanical cadaver study was to evaluate the effects of high-grade posterolateral tibia plateau fractures on the kinematics of anterior cruciate ligament (ACL)-deficient joints; it was hypothesized that, owing to the loss of the integrity of the osseous support of the posterior horn of the lateral meniscus (PHLM), these fractures would influence the biomechanical function of the lateral meniscus (LM) and consequently lead to an increase in anterior translational and anterolateral rotational (ALR) instability. METHODS: Eight fresh-frozen cadaveric knees were tested using a six-degree-of-freedom robotic setup (KR 125, KUKA Robotics, Germany) with an attached optical tracking system (Optotrack Certus Motion Capture, Northern Digital, Canada). After the passive path from 0 to 90° was established, a simulated Lachman test and pivot-shift test as well as external rotation (ER) and internal rotation (IR) were applied at 0°, 30°, 60° and 90° of flexion under constant 200 N axial loading. All of the parameters were initially tested in the intact and ACL-deficient states, followed by two different types of posterolateral impression fractures. The dislocation height was 10 mm, and the width was 15 mm in both groups. The intraarticular depth of the fracture corresponded to half of the width of the posterior horn of the lateral meniscus in the first group (Bankart 1) and 100% of the meniscus width in the second group (Bankart 2). RESULTS: There was a significant decrease in knee stability after both types of posterolateral tibial plateau fractures in the ACL-deficient specimens, with increased anterior translation in the simulated Lachman test at 0° and 30° of knee flexion (p = 0.012). The same effect was seen with regard to the simulated pivot-shift test and IR of the tibia (p = 0.0002). In the ER and posterior drawer tests, ACL deficiency and concomitant fractures did not influence knee kinematics (n.s.). CONCLUSION: This study demonstrates that high-grade impression fractures of the posterolateral aspect of the tibial plateau increase the instability of ACL-deficient knees and result in an increase in translational and anterolateral rotational instability.

The Role of Fibers Within the Tibial Attachment of the Anterior Cruciate Ligament in Restraining Tibial Displacement.

PURPOSE: To evaluate the load-bearing functions of the fibers of the anterior cruciate ligament (ACL) tibial attachment in restraining tibial anterior translation, internal rotation, and combined anterior and internal rotation laxities in a simulated pivot-shift test. METHODS: Twelve knees were tested using a robot. Laxities tested were: anterior tibial translation (ATT), internal rotation (IR), and coupled translations and rotations during a simulated pivot-shift. The kinematics of the intact knee was replayed after sequentially transecting 9 segments of the ACL attachment and fibers entering the lateral gutter, measuring their contributions to restraining laxity. The center of effort (COE) of the ACL force transmitted to the tibia was calculated. A blinded anatomic analysis identified the densest fiber area in the attachment of the ACL and thus its centroid (center of area). This centroid was compared with the biomechanical COE. RESULTS: The anteromedial tibial fibers were the primary restraint of ATT (84% across 0° to 90° flexion) and IR (61%) during isolated and coupled displacements, except for the pivot-shift and ATT in extension. The lateral gutter resisted 28% of IR at 90° flexion. The anteromedial fibers showed significantly greater restraint of simulated pivot-shift rotations than the central and posterior fibers (P < .05). No significant differences (all <2 mm) were found between the anatomic centroid of the C-shaped attachment and the COE under most loadings. CONCLUSIONS: The peripheral anteromedial fibers were the most important area of the ACL tibial attachment in the restraint of tibial anterior translation and internal rotation during isolated and coupled displacements. These mechanical results matched the C-shaped anteromedial attachment of the dense collagen fibers of the ACL. CLINICAL RELEVANCE: The most important fibers in restraining tibial displacements attach to the C-shaped anteromedial area of the native ACL tibial attachment. This finding provides an objective rationale for ACL graft position to enable it to reproduce the physiological path of load transmission for tibial restraint.

Anatomy of proximal attachment, course, and innervation of hamstring muscles: a pictorial essay.

Hamstring injuries are very common in sports medicine. Knowing their anatomy, morphology, innervation, and function is important to provide a proper diagnosis, treatment as well as appropriate prevention strategies. In this pictorial essay, based on anatomical dissection, the detailed anatomy of muscle-tendon complex is reviewed, including their proximal attachment, muscle course, and innervation. To illustrate hamstrings' role in the rotational control of the tibia, the essay also includes the analysis of their biomechanical function.Level of evidence V (expert opinion based on laboratory study).

A polygon-shaped complex appearance of medial patellofemoral ligament with dynamic functional insertion based on an outside-in and inside-out dissection technique.

PURPOSE: To describe the unclarified characteristics of medial patellofemoral ligament and its relation to neighboring structures. METHODS: Sixteen fresh-frozen human knees were dissected in using outside-in and inside-out combined technique. The patellar side attachment was observed from the inside view and femoral side from outside view. RESULTS: The medial patellofemoral ligament was described a complex and multiconnected structure. The femoral side included the upper and lower portion, of which the upper portion attached on the femur with mean width 7.5 ± 1.1 mm and its superficial fibers extended to the adductor magnus tendon and the medial gastrocnemius tendon, and of which the lower portion appeared a right-triangle connected to the MCL without bony attachment. From inside view, the patellar attachment consisted of the bony and non-bony parts. The width of bony attachment was measured mean 16.3 ± 3.8 mm, and the non-bony attachment was found attached on the vastus intermedius tendon with mean width 21.7 ± 4.8 mm. The average thickness was 0.4 ± 0.1 mm and the length were inside assessed mean 67.9 ± 6.1 mm. CONCLUSION: The medial patellofemoral ligament which dissected a complicated structure with bony and non-bony attachment and multi-connected to neighboring structures on both patella and femur side appears as a polygon-shaped complex structure.

Posterior cruciate ligament is twisted and flat structure: new prospective on anatomical morphology.

PURPOSE: This cadaveric study aimed to elucidate PCL morphology by observing the anatomical relationship with other structures and the fibre layers of the PCL in cross section for remnant preserving PCL reconstruction. METHODS: Seventeen fresh-frozen cadaveric knees were studied, using the clock-face method to analyse the anatomical relationship between the PCL and Humphrey's ligament. The width and thickness of the PCL, Humphrey's and Wrisberg's ligaments were measured. The PCL was cut sharply perpendicular to the tibia shaft, and the fibre layers were observed in cross section. RESULTS: The PCL was located between 12 and 4 o'clock in the right knee (8 and 12 o'clock in the left), while Humphrey's ligament was located between 2 and 4 o'clock in the right knee (8 and 10 o'clock in the left). Humphrey's ligament at femoral insertion, midsubstance and lateral meniscus insertion averaged 8.7 ± 2.3, 5.9 ± 2.1 and 6.1 ± 2.0 mm, respectively, while the thickness at each level averaged 2.0 ± 1.2, 1.6 ± 0.6 and 1.9 ± 0.6 mm. The width of the PCL at midsubstance and at medial meniscus level averaged 13.3 ± 2.0 and 11.0 ± 1.6 mm, respectively, while the thickness of the PCL averaged 5.4 ± 0.8 and 5.5 ± 1.4 mm. In cross section, multiple, interconnected layers were observed which could not be divided. The main layers at each level were aligned from the posterolateral to the anteromedial aspect and formed a C-shape at the medial meniscus level. CONCLUSION: The PCL at midsubstance is flat. PCL appears as a twisted ribbon composed of many small fibres without clearly separate bundles. When remnant preserving PCL reconstruction is performed, it is necessary to take account of not only PCL morphology but also the ligaments of Humphrey and Wrisberg. These findings may affect the PCL footprint and the graft shape in the future remnant preserving PCL reconstruction.

Medial meniscus anatomy-from basic science to treatment.

This paper focuses on the anatomical attachment of the medial meniscus. Detailed anatomical dissections have been performed and illustrated. Five zones can be distinguished in regard to the meniscus attachments anatomy: zone 1 (of the anterior root), zone 2 (anteromedial zone), zone 3 (the medial zone), zone 4 (the posterior zone) and the zone 5 (of the posterior root). The understanding of the meniscal anatomy is especially crucial for meniscus repair but also for correct fixation of the anterior and posterior horn of the medial meniscus.

Ribbon like appearance of the midsubstance fibres of the anterior cruciate ligament close to its femoral insertion site: a cadaveric study including 111 knees.

PURPOSE: Recently, the configuration of the anterior cruciate ligament (ACL) from its direct femoral insertion to midsubstance was found to be flat. This might have an important impact for anatomical ACL reconstruction. The purpose of this anatomical study was to evaluate the macroscopic appearance of the ACL from femoral to midsubstance. METHODS: The ACL was dissected in 111 human fresh frozen cadaver knees from its femoral insertion to midsubstance, and the shape was described. The anatomical findings were documented on digital photographs and on video. Thirty knees were sent for computed tomography (CT), magnetic resonance imaging (MRI) and histology of the femoral ACL insertion. RESULTS: Two millimetres from its direct femoral insertion, the ACL fibres formed a flat ribbon in all dissected knees without a clear separation between AM and PL bundles. The ribbon was in exact continuity of the posterior femoral cortex. The width of the ribbon was between 11.43 and 16.18 mm and the thickness of the ACL was only 2.54-3.38 mm. 3D CT, MRI and the histological examination confirmed above findings. CONCLUSION: This is a detailed anatomical study describing the ribbon-like structure of the ACL from its femoral insertion to midsubstance. A key point was to carefully remove the surface fibrous membrane of the ACL. A total of 2-3 mm from its bony femoral insertion, the ACL formed a flat ribbon without a clear separation between AM and PL bundles. The ribbon was in exact continuity of the posterior femoral cortex. The findings of a flat ligament may change the future approach to femoral ACL footprint and midsubstance ACL reconstruction and to graft selection.

Flat midsubstance of the anterior cruciate ligament with tibial "C"-shaped insertion site.

PURPOSE: This anatomical cadaver study was performed to investigate the flat appearance of the midsubstance shape of the anterior cruciate ligament (ACL) and its tibial "C"-shaped insertion site. METHODS: The ACL midsubstance and the tibial ACL insertion were dissected in 20 cadaveric knees (n = 6 fresh frozen and n = 14 paraffined). Magnifying spectacles were used for all dissections. Morphometric measurements were performed using callipers and on digital photographs. RESULTS: In all specimens, the midsubstance of the ACL was flat with a mean width of 9.9 mm, thickness of 3.9 mm and cross-sectional area of 38.7 mm(2). The "direct" "C"-shaped tibial insertion runs from along the medial tibial spine to the anterior aspect of the lateral meniscus. The mean width (length) of the "C" was 12.6 mm, its thickness 3.3 mm and area 31.4 mm(2). The centre of the "C" was the bony insertion of the anterior root of the lateral meniscus overlayed by fat and crossed by the ACL. No posterolateral (PL) inserting ACL fibres were found. Together with the larger "indirect" part (area 79.6 mm(2)), the "direct" one formed a "duck-foot"-shaped footprint. CONCLUSION: The tibial ACL midsubstance and tibial "C"-shaped insertion are flat and are resembling a "ribbon". The centre of the "C" is the bony insertion of the anterior root of the lateral meniscus. There are no central or PL inserting ACL fibres. Anatomical ACL reconstruction may therefore require a flat graft and a "C"-shaped tibial footprint reconstruction with an anteromedial bone tunnel for single bundle and an additional posteromedial bone tunnel for double bundle.

Risk of Arthroplasty in Patients with Subchondral Insufficiency Fractures of the Knee: A Matched Study of the Implantable Shock Absorber using a Validated Predictive Model.

Subchondral insufficiency fractures of the knee (SIFK) can result in high rates of osteoarthritis and arthroplasty. The implantable shock absorber (ISA) implant is a titanium and polycarbonate urethane device which reduces the load on the medial compartment of the knee by acting as an extra-articular load absorber while preserving the joint itself. The purpose of this study was to evaluate whether partially unloading the knee with the ISA altered the likelihood of progression to arthroplasty utilizing a validated predictive risk model (SIFK score). A retrospective case-control (2:1) study was performed on patients with SIFK without any previous surgery and on those implanted with the ISA with the primary outcome being progression to arthroplasty compared with nonoperative treatment at 2 years. Baseline and final radiographs, as well as magnetic resonance imagings, were reviewed for the evaluation of meniscus or ligament injuries, insufficiency fractures, and subchondral edema. Patients from a prospective study were matched using the exact SIFK Score, a validated predictive score for progression to arthroplasty in patients with SIFK, to those who received the ISA implant. Kaplan-Meier analysis was conducted to assess survival. A total of 57 patients (38 controls:19 ISA) with a mean age of 60.6 years and 54% female were included. The SIFK score was matched exactly between cases and controls for all patients. The 2-year survival rate of 100% for the ISA group was significantly higher than the corresponding rate of 61% for the control group (p < 0.01). In ISA, 0% of the patients converted to arthroplasty at 2 years, and 5% (one patient) had hardware removal at 1 year. When stratified by risk, the ISA group did not have a significantly higher survival compared with low-risk (p = 0.3) or medium-risk (p = 0.2) controls, though it had a significantly higher survival for high-risk groups at 2 years (100 vs. 15%, p < 0.01). SIFK of the medial knee can lead to significant functional limitation and high rates of conversion to arthroplasty. Implants such as the ISA have the potential to alter the progression to arthroplasty in these patients, especially those at high risk.

Posterior Cruciate Ligament Reconstruction Using Flat Soft-Tissue Grafts.

Isolated posterior cruciate ligament (PCL) ruptures are relatively rare, but they more commonly occur in multiligament knee injuries. To date, in isolated or combined injuries with grade III step-off, surgical treatment is recommended to restore joint stability and improve knee function. Several techniques for PCL reconstruction have been described. However, recent evidence has suggested that broad, flat soft-tissue grafts may more closely mimic the native PCL ribbonlike morphology in PCL reconstruction. Furthermore, a femoral rectangular bone tunnel may more accurately re-create the native PCL attachment, allowing grafts to simulate native PCL rotation during knee flexion and potentially improving biomechanics. Therefore, we have developed a PCL reconstruction technique using flat quadriceps or hamstring grafts. This technique can be performed using 2 types of surgical instruments that allow for the creation of a rectangular femoral bone tunnel.

A new three-dimensional patient-specific cutting guide for opening wedge high tibial osteotomy based on ct scan: preliminary in vitro results.

PURPOSE: The aim of this study was to evaluate the accuracy of a patient-specific cutting guide on both coronal and sagittal alignment compared to the pre-operative planning in OWHTO. METHODS: Twelve OWHTO on 6 cadaveric specimens were performed by 3 experienced knee surgeons using patient-specific cutting guides based on 3D pre-operative planning. Since the specimens had no major deformities, a fixed correction of 6° on the left and 10° on the right legs were carried out to simulate different scenarios. A pre-operative and post-OWHTO 3D CT scans were performed, and images were superimposed using the dedicated 3D planning software to align their reference axes. A pre-operative planning was performed considering both Medial Proximal Tibial Angle (MPTA) and Posterior Tibial Slope (PTS), and a patient-specific cutting guide was produced. Planned and post-OWHTO MPTA and PTS were evaluated (mean and standard deviation), and Pearson's correlation coefficient was calculated to assess precision and accuracy of the whole treatment. RESULTS: A mean correction of 6,1° (SD 1,9°) and 1,2° (SD 1°) was obtained respectively in the coronal plane (MPTA) and in the sagittal plane (PTS). The average difference between planned and post-OWHTO MPTA and PTS was respectively 1,2° (SD 0,6°) and 1,2° (SD 1°) in the sagittal plane (PTS). Pearson's correlation coefficient demonstrated a good accuracy of the treatment in both coronal and sagittal plane (respectively r=0,95 and r=0,86). No lateral hinge fractures were detected at the post-operative CT scan. CONCLUSION: OWTHO performed with the help of 3D patient specific cutting guide on cadaveric specimens demonstrated good accuracy and reliability in obtaining the planned correction. In vivo studies are necessary to confirm these results and evaluate cost-effectiveness of this system. LEVEL OF EVIDENCE: Level IV cadaveric study.

MCL Reconstruction Using a Flat Tendon Graft for Anteromedial and Posteromedial Instability.

The main principles of the present medial collateral ligament (MCL) reconstruction techniques are (1) to approximate the natural anatomy and (2) to restore the main passive restraining structures in anteromedial and posteromedial knee instability. Therefore, we describe a technique using a flat tendon graft instead of tubular grafts with point-to-point bone fixation. Moreover, we address the deep MCL, a relevant restraint to anteromedial instability.

The ultrasonographic dynamic heel-rise test of the Achilles tendon.

The treatment of Achilles tendon rupture attempts to restore the primary anatomical structure and principal biomechanical properties of the damaged tendon. Postoperative clinical assessment of the healing progression and function monitoring may be difficult and require experience. Diagnostic imaging (ultrasonography and magnetic resonance imaging) helps monitor the healing process. In the following paper, we propose a heel-rise test - a dynamic assessment of the Achilles tendon performed under direct observation and ultrasound monitoring to establish the tension of the Achilles tendon. The test allows for a simple assessment of tendon function and may be safely repeated at any postoperative stage. It may be performed by a physician, radiologist and physiotherapist to monitor the recovery process following Achilles tendon damage.

Anterior Cruciate Ligament Reconstruction Using a Ribbon-Like Graft With a C-Shaped Tibial Bone Tunnel.

According to recent anatomic studies, the anterior cruciate ligament (ACL) appears to be a flat, "ribbon-like" structure, with a thin, oval-shaped insertion on the femur and a C-shaped tibial insertion. According to this anatomy, we describe an ACL-reconstruction technique that aims to approximate this natural anatomy. The basic principle of this technique is not to use conventional round tunnels but create tunnel shapes that resemble more closely the original ACL insertion sites. Using either a rectangular quadriceps tendon graft or a "flat" hamstring graft may not only provide a biomechanical advantage with increased rotational stability but also improve bone-tendon healing due to increased bone-tendon contact and decreased diffusion length. Creating a C-shaped tibial tunnel also avoids laceration of the anterior horn of the lateral meniscus, which is frequently harmed during conventional tibial tunnel drilling.

An Updated Overview of the Anatomy and Function of the Proximal Medial Patellar Restraints (Medial Patellofemoral Ligament and the Medial Quadriceps Tendon Femoral Ligament).

The medial patellofemoral ligament (MPFL) has been widely accepted to function as "the primary static restraint to lateral patellar displacement." However, current growing evidence suggests that there is a complex of medial patellofemoral/tibial ligaments, both proximal [MPFL, and medial quadriceps tendon femoral ligament (MQTFL)], and distal (medial patellotibial ligament and the medial patellomeniscal ligament) which restrain lateral patellar translation at different degrees of knee flexion. Specifically, the MQTFL has gained popularity over the last decade because of pure soft tissue attachments into the extensor mechanism that allow for avoidance of drilling tunnels into the patella during reconstruction. The purpose of this article was to report on the current knowledge (anatomy, biomechanics, diagnosis, indications for surgery, and techniques) on the proximal medial patellar restraints, namely the MPFL and the MQTFL, collectively referred to as the proximal medial patellar restraints.

Two-Year Results of the PHANTOM High Flex Trial: A Single-Arm Study on the Atlas Unicompartmental Knee System Load Absorber in Patients With Medial Compartment Osteoarthritis of the Knee.

The Atlas Knee System was designed to fill the gap between no longer effective conservative treatments and more invasive surgery for young patients with medial knee osteoarthritis (OA). This article reports on the 2-year results of a single-arm study of 26 subjects who previously reported favorable clinical outcomes 1 year post implantation. Western Ontario and McMaster Universities Osteoarthritis Index pain and function scores improved by a clinically meaningful amount relative to baseline, and subjects had a return to normal range of motion. This study confirmed that the benefit of a joint unloading device in the management of young patients with medial knee OA is maintained over 2 years. This trial was registered with ClinicalTrials.gov (NCT02711254).

Anatomic Study and Reanalysis of the Nomenclature of the Anterolateral Complex of the Knee Focusing on the Distal Iliotibial Band: Identification and Description of the Condylar Strap.

BACKGROUND: The capsulo-osseous layer (COL), short lateral ligament, mid-third lateral capsular ligament, lateral capsular ligament, and anterolateral ligament (ALL) are terms that have been used interchangeably to describe what is probably the same structure. This has resulted in confusion regarding the anatomy and function of the anterolateral complex of the knee and its relation to the distal iliotibial band (ITB). PURPOSE: To characterize the macroscopic anatomy of the anterolateral complex of the knee, in particular the femoral condylar attachment of the distal ITB. We identified a specific and consistent anatomic structure that has not been accurately described previously; it connects the deep surface of the ITB to the condylar area and is distinct from the ALL, COL, and Kaplan fibers. STUDY DESIGN: Descriptive laboratory study. METHODS: Sixteen fresh-frozen human cadaveric knees were used to study the anterolateral complex of the knee. Standardized dissections were performed that included qualitative and quantitative assessments of the anatomy through both anterior (n = 5) and posterior (n = 11) approaches. RESULTS: The femoral condylar attachment of the distal ITB was not reliably identified by anterior dissection but was in all posterior dissections. A distinct anatomic structure, hereafter termed the "condylar strap" (CS), was identified between the femur and the lateral gastrocnemius on one side and the deep surface of the ITB on the other, in all posteriorly dissected specimens. The structure had a mean thickness of 0.88 mm, and its femoral insertion was located between the distal Kaplan fibers and the epicondyle. The proximal femoral attachment of the structure had a mean width of 15.82 mm, and the width of the distal insertion of the structure on the ITB was 13.27 mm. The mean length of the structure was 26.33 mm on its distal border and 21.88 mm on its proximal border. The qualitative evaluation of behavior in internal rotation revealed that this anatomic structure became tensioned and created a tenodesis effect on the ITB. CONCLUSION: There is a consistent structure that attaches to the deep ITB and the femoral epicondylar area. The orientation of fibers suggests that it may have a role in anterolateral knee stability. CLINICAL RELEVANCE: This new anatomic description may help surgeons to optimize technical aspects of lateral extra-articular procedures in cases of anterolateral knee laxity.

Monitoring of the Achilles tendon healing process: can artificial intelligence be helpful?

PURPOSE: The aim of this study was to verify improved, ensemble-based strategy for inferencing with use of our solution for quantitative assessment of tendons and ligaments healing process and to show possible applications of the method. METHODS: We chose the problem of the Achilles tendon rupture as an example representing a group of common sport traumas. We derived our dataset from 90 individuals and divided it into two subsets: healthy individuals and patients with complete Achilles tendon ruptures. We computed approx. 160 000 2D axial cross-sections from 3D MRI studies and preprocessed them to create a suitable input for artificial intelligence methods. Finally, we compared different training methods for chosen approaches for quantitative assessment of tendon tissue healing with the use of statistical analysis. RESULTS: We showed improvement in inferencing with use of the ensemble technique that results from achieving comparable accuracy of 99% for our previously published method trained on 500 000 samples and for the new ensemble technique trained on 160 000 samples. We also showed real-life applications of our approach that address several clinical problems: (1) automatic classification of healthy and injured tendons, (2) assessment of the healing process, (3) a pathologic tissue localization. CONCLUSIONS: The presented method enables acquiring comparable accuracy with less training samples. The applications of the method presented in the paper as case studies can facilitate evaluation of the healing process and comparing with previous examination of the same patient as well as with other patients. This approach might be probably transferred to other musculoskeletal tissues and joints.