RESUMO
The complete structure revision of the RE2PdGe3 (RE = rare-earth metal) series revealed that Yb2PdGe3 is the only AlB2 ordered superstructure. Good-quality single crystals of this compound were successfully grown from molten indium flux, enabling accurate single-crystal investigations. Yb2PdGe3 crystallizes with the Ce2CoSi3-type structure in the hexagonal space group P6/mmm (no. 191) with lattice parameters a = 8.468(1) Å and c = 4.0747(7) Å. This structure is a four-order derivative of AlB2, composed of planar ∞2[PdGe3] honeycomb layers spaced by Yb species, located at the center of Ge6 and Ge4Pd2 hexagons. A superconducting transition is observed below the critical temperature of 4 K. A divalent state of Yb is deduced from magnetic susceptibility measurements below room temperature, which indicate an almost nonmagnetic behavior. A charge transfer from Yb to Pd and Ge was evidenced by the Quantum Theory of Atoms in Molecules (QTAIM) effective charges; polar four-atomic Ge-Pd/Yb and two-atomic Pd-Yb bonds were observed from the ELI-D (electron localizability indicator), partial ELI-D, and ELI-D/QTAIM intersections. The bonding interactions between Ge atoms within regular Ge6 hexagons are found to be intermediate between single bonds, as in elemental Ge, and higher-order bonds in the hypothetic Ge6H6 and Ge66- aromatic molecules.
RESUMO
The Sc2Ru compound, obtained by high-temperature synthesis, was found to crystallize in a new trigonal hP45 structure type [space group P3Ì m1; a = 9.3583(9) Å and c = 11.285(1) Å]: Ru@Sc8 cubes, Ru@Sc12 icosahedra, and uncommon Ru@Sc10 sphenocoronae are the building blocks of a unique motif tiling the whole crystal space. According to density functional theory studies, Sc2Ru is a metallic compound characterized by multicenter interactions: a significant charge transfer occurs from Sc to Ru, indicating an unexpectedly strong ionic character of the interactions between the two transition metals. Energy calculations support our experimental results in terms of stability of this compound, contributing to the recurrent discussion on the limits of the high-throughput first-principles calculations for metallic materials design.
RESUMO
The new intermetallic compound Eu2Pd2Sn has been investigated. A single crystal was selected from the alloy and was analyzed by single-crystal X-ray diffraction, revealing that this compound possesses the noncentrosymmetric Ca2Pd2Ge structure type being, so far, the only rare-earth-based representative. Bonding analysis, performed on the basis of DOS and (I)COHP, reveals the presence of strong covalent Sn-Pd bonds in addition to linear and equidistant Pd-Pd chains. The incomplete ionization of Eu leads to its participation in weaker covalent interactions. The magnetic effective moment, extracted from the magnetic susceptibility χ(T) is µeff = 7.87 µB, close to the free ion Eu2+ value (µeff = 7.94 µB). The maximum of χ(T) at TN â¼ 13 K indicates an antiferromagnetic behavior below this temperature. A coincident sharp anomaly in the specific heat CP(T) emerges from a broad anomaly centered at around 10 K. From the reduced jump in the heat capacity at TN a scenario of a transition to an incommensurate antiferromagnetic phase below TN followed by a commensurate configuration below 10 K is suggested.
RESUMO
The two La2Pd3Ge5 and Nd2Pd3Ge5 compounds, crystallizing in the oI40-U2Co3Ge5 crystal structure, were targeted for analysis of their chemical bonding and physical properties. The compounds of interest were obtained by arc melting and characterized by differential thermal analysis, scanning electron microscopy, and X-ray diffraction both on powder and on a single crystal (for the La analogue), to ensure the high quality of the samples and accurate crystallographic data. Chemical bonding was studied by analyzing the electronic structure and effective QTAIM charges of La2Pd3Ge5. A significant charge transfer mainly occurs from La to Pd so that Ge species assume tiny negative charges. This result, together with the -(I)COHP analysis, suggests that, in addition to the expected homopolar Ge bonds within zigzag chains, heteropolar interactions between Ge and the surrounding La and Pd occur with multicenter character. Covalent La-Pd interactions increase the complexity of chemical bonding, which could not be adequately described by the simplified, formally obeyed, Zintl-Klemm scheme. Electric resistivity, specific heat, magnetization, and magnetic susceptibility as a function of temperature indicate for both compounds a metallic-like behavior. For Nd2Pd3Ge5, two low-temperature phase transitions are detected, leading to an antiferromagnetic ground state.
RESUMO
A comparative chemical bonding analysis for the germanides La2 MGe6 (M=Li, Mg, Al, Zn, Cu, Ag, Pd) and Y2 PdGe6 is presented, together with the crystal structure determination for M=Li, Mg, Cu, Ag. The studied compounds adopt the two closely related structure types oS72-Ce2 (Ga0.1 Ge0.9 )7 and mS36-La2 AlGe6 , containing zigzag chains and corrugated layers of Ge atoms bridged by M species, with La/Y atoms located in the biggest cavities. Chemical bonding was studied by means of the quantum chemical position-space techniques QTAIM (quantum theory of atoms in molecules), ELI-D (electron localizability indicator), and their basin intersections. The new penultimate shell correction (PSC0) method was introduced to adapt the ELI-D valence electron count to that expected from the periodic table of the elements. It plays a decisive role to balance the Ge-La polar-covalent interactions against the Ge-M ones. In spite of covalently bonded Ge partial structures formally obeying the Zintl electron count for M=Mg2+ , Zn2+ , all the compounds reveal noticeable deviations from the conceptual 8-N picture due to significant polar-covalent interactions of Ge with La and M ≠ Li, Mg atoms. For M=Li, Mg a formulation as a germanolanthanate M[La2 Ge6 ] is appropriate. Moreover, the relative Laplacian of ELI-D was discovered to reveal a chemically useful fine structure of the ELI-D distribution being related to polyatomic bonding features. With the aid of this new tool, a consistent picture of La/Y-M interactions for the title compounds was extracted.
RESUMO
The crystal chemical features of the new series of compounds R6Mg23C with R = La-Sm or Gd and Ce6Mg23Z with Z = C, Si, Ge, Sn, Pb, P, As, or Sb have been studied by means of single-crystal and powder X-ray diffraction techniques. All phases crystallize with the cubic Zr6Zn23Si prototype (cF120, space group Fm3Ì m, Z = 4), a filled variant of the Th6Mn23 structure. While no Th6Mn23-type binary rare earth-magnesium compound is known to exist, the addition of a third element Z (only 3 atom %), located into the octahedral cavity of the Th6Mn23 cell (Wyckoff site 4a), stabilizes this structural arrangement and makes possible the formation of the ternary R6Mg23Z compounds. The results of both structural and topological analyses as well as of LMTO electronic structure calculations show that the interstitial element plays a crucial role in the stability of these phases, forming a strongly bonded [R6Z] octahedral moiety spaced by zeolite cage-like [Mg45] clusters. Considering these two building units, the crystal structure of these apparently complex intermetallics can be simplified to the NaCl-type topology. Moreover, a structural relationship between RMg3 and R6Mg23C compounds has been unveiled; the latter can be described as substitutional derivatives of the former. The geometrical distortions and the consequent symmetry reduction that accompany this transformation are explicitly described by means of the Bärnighausen formalism within group theory.
RESUMO
Atom order in the crystal structures of Yb2Cu2-xMg (x = 0.17; Mo2FeB2-type; P4/mbm; a = 0.75592(2) nm; c = 0.40282(1) nm) and Yb9+xCuMg4-x (x = 0.034; Hf9Mo4B-type; P63/mmc; a = 1.0169(5) nm; c = 1.0290(5) nm) was determined from powder and X-ray single-crystal counter data analyses supported by electron probe microanalyses. Among the group of the so-called κ-phases, Yb9+xCuMg4-x is the first representative formed by a lanthanoid element. The structure of this κ-phase can be viewed as a typical network of corner-connected empty Yb6-octahedra, which encompass Yb6Mg6-icosahedra (filled by a mix of Mg/Yb atoms) and Yb6-trigonal prisms centered by Cu atoms to complete the three-dimensional metal framework. From another point of view, the same structure is considered as built from infinite polyicosahedral columns of Yb9Mg4 composition with Cu atoms located in trigonal prismatic interstices, highlighting similarities with other Yb-rich Yb-Cu-Mg phases. Density functional theory (DFT) calculations classify Yb9CuMg4 as a polar intermetallic. Metallic-like behavior is inferred from the Sommerfeld constant, γ = 49.2 mJ/mol·K(2), derived from the electronic density of states, calculated at the Fermi level. DFT integration of the f-density of states indicates almost completely filled f-states, revealing 13.6 and 13.7 electrons in the valence band for Yb1 and Yb2 atoms, respectively, close to the Yb(2+) ground state ((1)S0) for both Yb atoms. Magnetic susceptibility data recorded on the same compound are consistent with a nonmagnetic divalent Yb(2+) state. Temperature-dependent heat capacity data display a metallic behavior characterized by a small Sommerfeld constant γ = 64.8 mJ/mol·K(2) and a rather low Debye temperature ΘD = 140 K as typical for soft materials.
RESUMO
Synthesis and structural characterization of the new compounds R2Zn1-xGe6 (R = La-Nd, Sm, Gd-Ho) is reported. A structural change was revealed along this series by careful analysis of single-crystal X-ray diffraction data. For light rare earths up to Tb the orthorhombic oS72-Ce2(Ga0.1Ge0.9)7 model was established; instead, the Dy compound represents a new structure type (P21/m, mP34, Z = 4, a = 7.9613(3) Å, b = 8.2480(4) Å, c = 10.5309(5) Å, ß = 100.861(1)°) being a superstructure of the mS36-La2AlGe6 prototype. The established structural models support the increase of Zn deficiency along the series, suggested by microprobe analysis, and its key role in governing structural changes. The vacancy ordering criterion was applied as a successful approach to find a general scheme including the structures of the â¼R2MGe6 compounds known up to now (R = rare-earth metal, M = transition metal, Mg, Al, Ga) and highlighting the subtle structural differences within this family. According to this scheme, these structures are obtained from a common aristotype (oS20-SmNiGe3) via symmetry reduction based on group-subgroup relations accompanied by ordering of vacancies. This approach was optimized with the help of the ToposPro software and extended to the R2Zn3Ge6 series, enriched with new members (R = Sm, Gd-Ho) during this work. Electronic structure calculations on La2ZnGe6 confirm the presence of infinite covalent germanium zigzag chains and three-bonded corrugated layers connected via Zn atoms to form a polyanionic network stabilized by La atoms.
RESUMO
Phase-change memory (PCM) is an emerging memory technology based on the resistance contrast between the crystalline and amorphous states of a material. Further development and realization of PCM as a mainstream memory technology rely on innovative materials and inexpensive fabrication methods. Here, we propose a generalizable and scalable solution-processing approach to synthesize phase-change telluride inks in order to meet demands for high-throughput material screening, increased energy efficiency, and advanced device architectures. Bulk tellurides, such as Sb2Te3, GeTe, Sc2Te3, and TiTe2, are dissolved and purified to obtain inks of molecular metal telluride complexes. This allowed us to unlock a wide range of solution-processed ternary tellurides by the simple mixing of binary inks. We demonstrate accurate and quantitative composition control, including prototype materials (Ge-Sb-Te) and emerging rare-earth-metal telluride-doped materials (Sc-Sb-Te). Spin-coating and annealing convert ink formulations into high-quality, phase-pure telluride films with preferred orientation along the (00l) direction. Deposition engineering of liquid tellurides enables thickness-tunable films, infilling of nanoscale vias, and film preparation on flexible substrates. Finally, we demonstrate cyclable and non-volatile prototype memory devices, achieving performance indicators such as resistance contrast and low reset energy on par with state-of-the-art sputtered PCM layers.
RESUMO
The formation and crystal structure of the binary Cu3As phase have been re-investigated. Some physical properties were then measured on both single crystal and polycrystalline bulk. Cu3As melts congruently at 835 °C. At room temperature (RT), this compound has been found to crystallize in the hexagonal Cu3P prototype (hP24, P63cm) with lattice parameters: a = 7.1393(1) Å and c = 7.3113(1) Å, rather than in the anti HoH3-type (hP24, P-3c1) as indicated in literature. A small compositional range of 74.0-75.5 at.% Cu (26.0-24.5 at.% As) was found for samples synthesized at 300 and 400 °C; a corresponding slight understoichiometry is found in one out of the four Cu atomic sites, leading to the final refined composition Cu2.882(1)As. The present results disprove a change in the crystal structure above RT actually reported in the phase diagram (from γ' to γ on heating). Instead, below RT, at T = 243 K (-30 °C), a first-order structural transition to a trigonal low-temperature superstructure, LT-Cu3-xAs (hP72, P-3c1) has been found. The LT polymorph is metrically related to the RT one, having the c lattice parameter three times larger: a = 7.110(2) Å and c = 21.879(4) Å. Both the high- and low-temperature polymorphs are characterized by the presence of a tridimensional (3D) uncommon and rigid Cu sublattice of the lonsdaleite type (Cu atoms tetrahedrally bonded), which remains almost unaffected by the structural change(s), and characteristic layers of triangular 'Cu3As'-units (each hosting one As atom at the center, interconnected each other by sharing the three vertices). The first-order transition is then followed by an additional structural change when lowering the temperature, which induces doubling of also the lattice parameter a. Differential scanning calorimetry nicely detects the first low-temperature structural change occurring at T = 243 K, with an associated enthalpy difference, ΔH(TR), of approximately 2 J/g (0.53 kJ/mol). Low-temperature electrical resistivity shows a typical metallic behavior; clear anomalies are detected in correspondence to the solid-state transformations. The Seebeck coefficient, measured as a function of temperature, highlights a conduction of n-type. The temperature dependence of the magnetic susceptibility displays an overall constant diamagnetic response.
RESUMO
Organic-inorganic Pb-free layered perovskites are efficient broadband emitters and thus are promising materials for lighting applications. However, their synthetic protocols require a controlled atmosphere, high temperature, and long preparation time. This hinders the potential tunability of their emission through organic cations, as is instead common practice in Pb-based structures. Here, we present a set of Sn-Br layered perovskite-related structures that display different chromaticity coordinates and photoluminescence quantum yield (PLQY) up to 80%, depending on the choice of the organic monocation. We first develop a synthetic protocol that is performed under air and at 4 °C, requiring only a few steps. X-ray and 3D electron diffraction analyses show that the structures exhibit diverse octahedra connectivity (disconnected and face-sharing) and thus optical properties, while preserving the organic-inorganic layer intercalation. These results provide key insight into a previously underexplored strategy to tune the color coordinates of Pb-free layered perovskites through organic cations with complex molecular configurations.
RESUMO
The synthesis, structural characterization, and chemical-bonding peculiarities of the two new polar lanthanum-magnesium germanides La(4)Mg(5)Ge(6) and La(4)Mg(7)Ge(6) are reported. The crystal structures of these intermetallics were determined by single-crystal X-ray diffraction analysis. The La(4)Mg(5)Ge(6) phase crystallizes in the orthorhombic Gd(4)Zn(5)Ge(6) structure type [Cmc2(1), oS60, Z = 4, a = 4.5030(7) Å, b = 20.085(3) Å, c = 16.207(3) Å, wR2 = 0.0451, 1470 F(2) values, 93 variables]. The La(4)Mg(7)Ge(6) phase represents a new structure type with a monoclinic unit cell [C2/m, mS34, Z = 2, a = 16.878(3) Å, b = 4.4702(9) Å, c = 12.660(3) Å, ß = 122.25(3)°, wR2 = 0.0375, 1466 F(2) values, 54 variables]. Crystallographic analysis together with linear muffin-tin orbital band structure calculations reveals the presence of strongly bonded 3D polyanionic [Mg-Ge] networks balanced by positively charged La atoms in both stoichiometric compounds. The La(4)Mg(5)Ge(6) compound is related to Zintl phases, showing a prominent density of states pseudogap at the Fermi level. A distinctive feature of the La(4)Mg(5)Ge(6) structure is the presence of Ge-Ge covalent dumbbells; in La(4)Mg(7)Ge(6), the higher Mg content generates a polyanionic network consisting exclusively of Mg-Ge heterocontacts. Nevertheless, the frameworks of the two phases are structurally similar, as is highlighted in this work.
RESUMO
The crystal structure of the complex La(43)Ni(17)Mg(5) ternary phase was solved and refined from X-ray single crystal diffraction data. It is characterized by a very large unit cell and represents a new structure type: La(43)Ni(17)Mg(5) - orthorhombic, Cmcm, oS260, a = 10.1895(3), b = 17.6044(14), c = 42.170(3) A, Z = 4, wR1 = 0.0598, wR2 = 0.0897, 4157 F(2) values, 176 variables. The crystal structures of the La-rich La-Ni-Mg intermetallic phases La(4)NiMg, La(23)Ni(7)Mg(4), and La(43)Ni(17)Mg(5) have been comparatively analyzed. The constitutive fragments of these structures are binary polyicosahedral core-shell clusters of Mg(4)La(22) and Mg(5)La(24) compositions together with binary polytetrahedral clusters of nickel and lanthanum atoms. The structures of the Mg-La clusters are described in detail as a unique feature of the analyzed intermetallic phases; the dodecahedral Voronoi polyhedra are proposed as a useful tool to characterize polyicosahedral clusters. The arrangements of the building units in the studied phases show some regularities; particularly the i(4)3, i(5)3 and L-i(4) units, made up of polyicosahedral clusters and analogous to the Kreiner i(3) and L units, are proposed as structural blocks.
RESUMO
The new intermetallic phase SrPt3In2 was synthesized by induction-melting of the elements in a sealed tantalum ampoule followed by long-term annealing for crystal growth. The SrPt3In2 structure was refined from single crystal X-ray diffraction data: Imma, a = 1674.7(6), b = 921.2(4), c = 971.2(4) pm, wR2 = 0.0551, 1192 F2 values and 55 variables. Electronic structure calculations indicate strong covalent Pt-In bonding and a substantial charge transfer from the strontium atoms to the three-dimensional [Pt3In2]δ- polyanionic network. The strontium atoms fill larger cavities within the network and the bonding of strontium to the polyanion is of the electrostatic type. The Bader charge calculations classify SrPt3In2 as a ternary platinide. The close relationship between the SrPt3In2 structure and the aristotype CaCu5 is discussed on the basis of a group-subgroup scheme in the Bärnighausen formalism along with other CaCu5 coloring variants and superstructures.
RESUMO
Icosacerium nonadecamagnesium henoctacontazinc, Ce(20)Mg(19)Zn(81), synthesized by fritting of the pure elements with subsequent arc melting, crystallizes with an unusually large cubic unit cell [space group F\overline{4}3m, a = 21.1979 (8) A] and represents a new structure type among the technologically important family of ternary rare earth-transition metal-magnesium intermetallics. The majority of atoms (two Ce and five Zn) display .3m site symmetry, two Ce and one Mg atom occupy three 2.mm positions, one Mg and one Zn have \overline{4}3m site symmetry, one Mg and three Zn atoms sit in ..m positions, and one Zn atom is in a general position. The Ce(20)Mg(19)Zn(81) structure can be described using the geometric concept of nested polyhedral units, by which it consists of four different polyhedral units, viz. A (Zn+Zn(4)+Zn(4)+Zn(12)+Ce(6)), B (Mg+Zn(12)+Ce(4)+Zn(24)+Ce(4)), C (Zn(4)+Zn(12)+Mg(6)) and D (Zn(4)+Zn(4)+Mg(12)+Ce(6)), with the outer construction unit being an octahedron or tetrahedron. All interatomic distances in the structure indicate metallic-type bonding.
RESUMO
The R2PdGe6 series (R = rare earth metal) was structurally characterized, and the results achieved were extended for a comprehensive study on R2MGe6 (M = another metal) compounds, employing symmetry-based structural rationalization and energy calculations. Directly synthesized R2PdGe6 exists for almost all R-components (R = Y, La-Nd, Sm and Gd-Lu) and even if with La is probably metastable. Several single crystal X-ray analyses (R = Y, Ce, Pr, Nd, Er and Lu) indicated oS72-Ce2(Ga0.1Ge0.9)7 as the correct structure. The alternative In-flux method, once optimized, produced three good quality R2PdGe6 single crystals: La2PdGe6 and Pr2PdGe6 turned out to be mS36-La2AlGe6-type non-merohedrally twinned crystals and Yb2PdGe6 is of oS72-Ce2(Ga0.1Ge0.9)7-type. The vacancy ordering phenomenon was considered as a possible cause of the symmetry reduction relations connecting the most frequently reported 2 : 1 : 6 structural models (oS18, oS72 and mS36) with the oS20-SmNiGe3 aristotype. The detected twin formation is consistent with the symmetry relations, which are discussed even considering the validity of the different structural models. DFT total energy calculations were performed for R2PdGe6 (R = Y and La) in the three abovementioned structural models, and for La2MGe6 (M = Pt, Cu, Ag and Au) in the oS18 and oS72 modifications. The results indicate that the oS18-Ce2CuGe6 structure, prevalently proposed in the literature, is associated with the highest energy and thus it is not likely to be realized in these series. The oS72 and mS36 polytypes are energetically equivalent, and small changes in the synthetic conditions could easily stabilize any of them, in agreement with experimental results obtained by direct and flux syntheses.