Determination of trace element contaminants in herbal teas using ICP-MS by different sample preparation method.

In recent years, the consumption rate of herbal teas has increased rapidly. In this study, 28 different plants (fennel, linden, roots, chamomile, green tea, thyme, sage, rosemary, rosehip, ginger, balm, echinacea, blue tea etc.) used as herbal tea bags and leaves/flowers. Different types of herbal tea were prepared keeping boiling water in contact for ten min with herbal teas and were digested with HNO3 and H2O2 in a microwave oven. In these samples, trace element concentrations (As, Ba, Cd, Co, Cu, Cr, Ni, Pb, Se, V, Zn) were determined by Inductively Coupled Plasma Mass Spectrometry. The analytical performances were assessed as linearity, the limit of detection, limit of quantification, specificity/selectivity and recovery (%). The recovery values changed between 88 and 112%.

Ligandless surfactant mediated solid phase extraction combined with Fe3O4 nano-particle for the preconcentration and determination of cadmium and lead in water and soil samples followed by flame atomic absorption spectrometry: multivariate strategy.

In the present study, a microextraction technique combining Fe3O4 nano-particle with surfactant mediated solid phase extraction ((SM-SPE)) was successfully developed for the preconcentration/separation of Cd(II) and Pb(II) in water and soil samples. The analytes were determined by flame atomic absorption spectrometry (FAAS). The effective variables such as the amount of adsorbent (NPs), the pH, concentration of non-ionic (TX-114) and centrifugation time (min) were investigated by Plackett-Burman (PBD) design. The important variables were further optimized by central composite design (CCD). Under the optimized conditions, the detection limits (LODs) of Cd(II) and Pb(II) were 0.15 and 0.74 µg/L, respectively. The validation of the proposed procedure was checked by the analysis of certified reference materials of TMDA 53.3 fortified water and GBW07425 soil. The method was successfully applied for the determination of Cd(II) and Pb(II) in water and soil samples.

The solid phase extraction of some metal ions using palladium nanoparticles attached to silica gel chemically bonded by silica-bonded N-propylmorpholine as new sorbent prior to their determination by flame atomic absorption spectroscopy.

In this research at first palladium nanoparticle attached to a new chemically bonded silica gel has been synthesized and has been characterized with different techniques such as X-ray diffraction (XRD), fourier transform infrared (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Then, this new sorbent (chemically modified silica gel with N-propylmorpholine (PNP-SBNPM)) was efficiently used for preconcentration of some metal ions in various food samples. The influence of effective variables including mass of sorbent, flow rate, pH of sample solutions and condition of eluent such as volume, type and concentration on the recoveries of understudy metal ions were investigated. Following the optimization of variables, the interfering effects of some foreign ions on the preconcentration and determination of the investigated metal ions described. At optimum values of variables, all investigated metal ions were efficiently recovered with efficiency more than 95%, relative standard deviation (RSD) between 2.4 and 2.8, and detection limit in the range of 1.4-2.7 ng mL⁻¹. The present method is simple and rapidly applicable for the determination of the understudied metal ions (ng mL⁻¹) in different natural food samples.

SDS-coated Sepabeads SP70-modified by 4-[(E)-3-phenylallylidene) amino] benzenethiol as new efficient solid phase for enrichment and determination of copper, nickel, chromium, and zinc ions in soil, plants, and mint water samples.

A sensitive and simple method based on modification of Sepabeads SP70 by 4-((E)-3-phenylallylidene) amino) benzenethiol for the simultaneous preconcentration of trace amounts of copper (Cu), nickel (Ni), chromium (Cr), and zinc (Zn) ions in some real samples has been reported. The metal ions which are retained as respective complexes on solid phase were eluted with 8 ml of 4 M nitric acid. The influences of different analytical parameters including pH, ligand amount and Sepabeads SP70 and SDS amount, eluting solutions, and sample volume on metal ions recoveries were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally >95% with RSD between 0.74 and 0.88. The proposed method has been successfully applied for the determination of these metals in some real samples with complex matrices.

Preconcentration and separation of trace amount of heavy metal ions on bis(2-hydroxy acetophenone)ethylendiimine loaded on activated carbon.

A sensitive and simple method for simultaneous preconcentration of trace heavy metal ions in some food samples has been reported. The method is based on the adsorption of Cr(3+), Fe(3+), Cu(2+), Ni(2+), Co(2+) and Zn(2+) on bis(2-hydroxy acetophenone)ethylendiimine (BHAPED) loaded on activated carbon (AC). The adsorbed metals on activated carbon were eluted using 2 mol L(-1) nitric acid in acetone. The influences of the analytical parameters including pH and sample volume were investigated. The effects of matrix ions on the recoveries of analyte ions were also investigated. The recoveries of analytes were generally higher than 94%. The method has been successfully applied for analysis of the metal contents in real samples including natural water samples.

Removal of cadmium from aqueous solution by Nordmann fir (Abies nordmanniana (Stev.) Spach. Subsp. nordmanniana) leaves.

The utility of Nordmann fir (Abies nordmanniana (Stev.) Spach. Subsp. nordmanniana) leaves from Eastern Black Sea region for the removal (sorption) of metal ions from aqueous solutions was investigated. For this, the optimum values of pH, time, metal concentration, leaf concentration, leaf particle size and adsorption capacity were determined. Also the recovery conditions of the metals from leaves were studied. Cd metal was selected because of its toxic properties. Freundlich isotherm model was used to describe the adsorption behaviour and the experimental results obtained for Cd(2+) adsorption, followed this model well. The utility of Nordmann fir leaves to remove toxic metals from aqueous solutions was proved. Hence, this study showed that the leaves of Nordmann fir can provide cheap source as biosorbents for toxic metal removal from natural or wastewaters.

Assessment of trace element levels in Rhododendron honeys of Black Sea Region, Turkey.

Rhododendron and multi-flower honeys obtained from Black Sea Region of Turkey (12 Rhododendron and 8 multi-flower honeys) were studied to determine the presence of the 14 trace elements such as Cu, Cd, Pb, Co, Cr, Ni, Al, Se, Zn, Mn, Fe, K, Ca and Mg. Trace element determination was performed by atomic absorption spectrometry (AAS) after microwave digestion. The results revealed that Rhododendron honeys exhibited higher concentrations of Cu, Co, Cr, Ni, Se, Zn, Ca and Mg but lower concentrations of Al, Mn, Fe and K than in the multi-flower honeys. Trace element levels in analyzed honey samples were generally lower than literature values.

Three modified activated carbons by different ligands for the solid phase extraction of copper and lead.

In the presented work, 5,5-diphenylimidazolidine-2,4-dione (phenytoin) (DFTD), 5,5-diphenylimidazolidine-2-thione-,4-one (thiophenytoin) (DFID) and 2-(4'-methoxy-benzylidenimine) thiophenole (MBIP) modified activated carbons have been used for the solid phase extraction of copper and lead ions prior to their flame atomic absorption spectrometric determinations. The influences of the various analytical parameters including pH, amounts of reagent, sample volume and eluent type, etc. on the recovery efficiencies of copper and lead ions were investigated. The influences of alkaline, earth alkaline and some transition metals on the adsorption of the analytes were also examined. The detection limits by three sigma for analyte ions were 0.65 and 0.42 microg L(-1) using activated carbon modified with DFID; 0.52 and 0.37 microg L(-1) using activated carbon modified with DFTD and 0.46 and 0.31 microg L(-1) using activated carbon modified with MBIP for Pb(II) and Cu(II), respectively. The procedure was applied to the determination of analytes in natural waters, soil, and blood samples with satisfactory results (recoveries greater than 95%, R.S.D.'s lower than 4%).

Development of a selective and sensitive flotation method for determination of trace amounts of cobalt, nickel, copper and iron in environmental samples.

A simple, selective and rapid flotation method for the separation-preconcentration of trace amounts of cobalt, nickel, iron and copper ions using phenyl 2-pyridyl ketone oxime (PPKO) has been developed prior to their flame atomic absorption spectrometric determinations. The influence of pH, amount of PPKO as collector, type and amount of eluting agent, type and amount of surfactant as floating agent and ionic strength was evaluated on the recoveries of analytes. The influences of the concomitant ions on the recoveries of the analyte ions were also examined. The enrichment factor was 93. The detection limits based on 3 sigma for Cu, Ni, Co and Fe were 0.7, 0.7, 0.8, and 0.7 ng mL(-1), respectively. The method has been successfully applied for determination of trace amounts of ions in various real samples.

Cloud point extraction for the determination of copper, nickel and cobalt ions in environmental samples by flame atomic absorption spectrometry.

A cloud point extraction procedure was presented for the preconcentration of copper, nickel and cobalt ions in various samples. After complexation with methyl-2-pyridylketone oxime (MPKO) in basic medium, analyte ions are quantitatively extracted to the phase rich in Triton X-114 following centrifugation. 1.0 mol L(-1) HNO(3) nitric acid in methanol was added to the surfactant-rich phase prior to its analysis by flame atomic absorption spectrometry (FAAS). The adopted concentrations for MPKO, Triton X-114 and HNO(3), bath temperature, centrifuge rate and time were optimized. Detection limits (3 SDb/m) of 1.6, 2.1 and 1.9 ng mL(-1) for Cu(2+), Co(2+) and Ni(2+) along with preconcentration factors of 30 and for these ions and enrichment factor of 65, 58 and 67 for Cu(2+), Ni(2+) and Co(2+), respectively. The high efficiency of cloud point extraction to carry out the determination of analytes in complex matrices was demonstrated. The proposed procedure was applied to the analysis of biological, natural and wastewater, soil and blood samples.

The determination of some heavy metals in food samples by flame atomic absorption spectrometry after their separation-preconcentration on bis salicyl aldehyde, 1,3 propan diimine (BSPDI) loaded on activated carbon.

A sensitive and simple method for the simultaneous preconcentration of Cr3+, Fe3+, Cu2+, Ni2+, Co2+ and Zn2+ in real samples has been reported. The method is based on the adsorption of analytes on bis salicyl aldehyde, 1,3 propan diimine (BSPDI) loaded on activated carbon. The adsorbed metals on modified activated carbon were eluted using 8 mL of 2 mol L(-1) nitric acid in acetone or 10 mL of 4 mol L(-1) HNO3. The influences of the analytical parameters including pH and sample volume were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally quantitative. The method has been successfully applied for these metals content evaluation in some food samples.

Preconcentration and separation of nickel, copper and cobalt using solid phase extraction and their determination in some real samples.

A solid phase extraction method has been developed to separate and concentrate trace amounts of nickel, cobalt and copper ions from aqueous samples for the measurement by flame atomic absorption spectrometry. By the passage of aqueous samples through activated carbon modified by dithioxamide (rubeanic acid) (DTO), Ni2+, Cu2+ and Co2+ ions adsorb quantitatively. The recoveries of analytes at pH 5.5 with 500 mg solid phase were greater than 95% without interference from alkaline, earth alkaline and some metal ions. The enrichment factor was 330. The detection limits by three sigma were 0.50 microg L(-1) for copper, 0.75 microg L(-1) for nickel and 0.80 microg L(-1) for cobalt. The loading capacity was 0.56 mg g(-1) for Ni2+, 0.50 mg g(-1) for Cu2+ and 0.47 mg g(-1) for Co2+. The presented procedure was applied to the determination of analytes in tap, river and sea waters, vegetable, soil and blood samples with successfully results (recoveries greater than 95%, R.S.D. lower than 2% for n=3).

Solid phase extraction method for selective determination of Pb(II) in water samples using 4-(4-methoxybenzylidenimine) thiophenole.

A sensitive and selective extractive preconcentration procedure for the determination of traces of lead in water samples has been developed. An alumina-sodium dodecyl sulfate (SDS) coated modified with 4-(4-methoxybenzylidenimine) thiophenole (MBITP) was used for preconcentration and determination of Pb(II) by flame atomic absorption spectrometry. Lead was adsorbed quantitatively on modified column due to its complexation with MBITP and quantitatively eluted using 5 mL 1 mol L(-1) nitric acid in acetone. The effects of parameters such as pH, amount of solid phase, amount of MBITP, flow rate, type and concentration of eluting agent were examined. The effect of interfering ions on the determination of Pb(II) was also investigated. The response of proposed method is linear in the concentration range 0.05-1.2 microg mL(-1) of Pb(II). The limit of detections (3S.D.(b)/m, n=4) and relative standard deviations (n=11) are 1.6 ng mL(-1) and 0.9%, respectively. The presented procedure was successfully applied for determination of lead content in real samples such as river, spring, waste and drinking water.

Speciation of Cr(III) and Cr(VI) after column solid phase extraction on Amberlite XAD-2010.

A speciation procedure for Cr(III) and Cr(VI) based on column solid phase extraction on Amberlite XAD-2010 and flame atomic absorption spectrometry combination. Cr(VI) was quantitatively recovered on Amberlite XAD-2010 resin at pH range of 2.0-3.0 as its diethyldithiocarbamate complex, while the recoveries of Cr(III) was below 5%. The influences of the various parameters including amounts of the reagents, eluent type and its volume, sample volume, etc., on the quantitative recoveries were examined. The interference of matrix and coexistent elements for method were studied. The detection limit (corresponding to three times the standard deviation of the blank) and the enrichment factor for Cr(VI) were found to be 1.28 microg/L and 25, respectively. To verify the accuracy of the method, drinking water certified reference material (CRM-TMDW-500) was analyzed and the results obtained were in good agreement with the certified value. The proposed method has been successfully applied to the speciation of Cr(III) and Cr(VI) in water samples and preconcentration of total chromium in environmental samples.

Central composite design and genetic algorithm applied for the optimization of ultrasonic-assisted removal of malachite green by ZnO Nanorod-loaded activated carbon.

Maximum malachite green (MG) adsorption onto ZnO Nanorod-loaded activated carbon (ZnO-NR-AC) was achieved following the optimization of conditions, while the mass transfer was accelerated by ultrasonic. The central composite design (CCD) and genetic algorithm (GA) were used to estimate the effect of individual variables and their mutual interactions on the MG adsorption as response and to optimize the adsorption process. The ZnO-NR-AC surface morphology and its properties were identified via FESEM, XRD and FTIR. The adsorption equilibrium isotherm and kinetic models investigation revealed the well fit of the experimental data to Langmuir isotherm and pseudo-second-order kinetic model, respectively. It was shown that a small amount of ZnO-NR-AC (with adsorption capacity of 20mgg(-1)) is sufficient for the rapid removal of high amount of MG dye in short time (3.99min).

Ligandless ultrasonic-assisted and ionic liquid-based dispersive liquid-liquid microextraction of copper, nickel and lead in different food samples.

A simple and rapid ultrasonic assisted-ionic liquid based-liquid-liquid microextraction (UA-IL-DLLME) method has been developed for the enrichment and separation of Cu(II), Ni(II) and Pb(II). A two level factorial design was used to determine the effect of key factors such as pH, volume of ionic liquid (IL), carbon tetra chloride (CCl4) and sonication time (St). 1-Butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) and CCl4 were used as an extractant and dispersant solvent, respectively. The accuracy of the proposed method was evaluated by analysing of SRM Apple Leaves 1515 certified reference material. The limits of detections (LODs) were 0.17 µg/L, 0.49 µg/L and 0.95 µg/L for Cu, Ni and Pb, respectively. The enrichment factor (EF) was 100. The method has been successfully applied for the analysis of the content of Cu, Ni and Pb in spice, vegetable and fruit samples by flame atomic absorption spectrometry (FAAS).

Spectrophotometric determination of trace amounts of tungsten in geological samples after preconcentration on Amberlite XAD-1180.

A method for the preconcentration of trace amounts of tungsten as its thiocyanate complex, using a column filled with Amberlite XAD-1180 resin, is proposed. After elution with a small volume of acetone, the analyte was determined spectrophotometrically with potassium thiocyanate and stannous chloride. The influence of several ions, as interferents, is discussed. The proposed method was applied to the determination of tungsten in geological samples with good analytical results, such as recoveries of 95% or above, relative standard deviations of 6% or below (n = 10) and a detection limit of 12 mugl(-1).

A new preconcentration and separation method for flame atomic absorption spectrometric determinations of some trace metal ions on a Diaion HP-20 column.

A preconcentration/separation method for determination of Cr(III), Cd(II), Bi(III) and Co(II) has been proposed. The analytes were adsorbed on a column filled Diaion HP-20 resin as metal-8-hydroxiquinoline complexes and desorbed from the column by using 10 ml of 1M HNO3 in acetone. The influences of some analytical parameters such as pH, amounts of oxine, type of eluent etc on the recoveries of chromium, cadmium, bismuth and cobalt were discussed. Effects of the various alkaline salts on the recoveries of the investigated ions were also examined. The method was applied for the determination of Cr(III), Cd(II), Bi(III) and Co(II) contents of table salt samples, some chemical grade alkaline salts produced in Turkey and a stream sediment standard reference material sample (GBW 07309) with satisfactory results (recoveries > 95%, relative standard deviations < 9%). The limit of detection for analyte ions (3s, N = 20) was between 23-305 ng/g.

Flame atomic absorption spectrometric (FAAS) determination of copper, iron and zinc in food samples after solid-phase extraction on Schiff base-modified duolite XAD 761.

The present study involves the development of solid-phase extraction (SPE) procedure for the preconcentration of trace amounts of copper (Cu(2+)), iron (Fe(3+)) and zinc (Zn(2+)) ions on duolite XAD 761 modified by bis(2-hydroxyacetophenone)-2,2-dimethyl-1,3-propanediimine(BHAPDMPDI). The complexation between the metal ions and the proposed ligand was investigated potentiometrically. The metal ions retained on the sorbent were quantitatively determined via complexation with BHAPDMPDI. The complexed metal ions were efficiently eluted using 6 mL of 4 mol L(-1) nitric acid in acetone. The influences of the analytical parameters, including pH, amounts of the ligand and the solid phase, eluent conditions and sample volume, on the recoveries of the metal ions were optimized. Using the optimized parameters, the linear response of the SPE method for Cu(2+), Zn(2+) and Fe(3+) ions were in the ranges of 0.01-0.34, 0.01-0.28 and 0.02-0.31 µg mL(-1), respectively, and the detection limits for Cu(2+), Zn(2+) and Fe(3+) ions were 1.8, 1.6 and 2.4 µg mL(-1), respectively. The proposed method exhibits a preconcentration factor of 208 for all of the ions studied and an enhancement factor for Cu(2+), Fe(3+) and Zn(2+) ions of 34, 28 and 38, respectively. The presented results demonstrate the successful application of the proposed method for the determination of these metal ions in some real samples with high recoveries (> 95%) and reasonable relative standard deviation (RDS <5%).

Diaion HP-2MG modified with 2-(2,6-dichlorobenzylideneamino) benzenethiol as new adsorbent for solid phase extraction and flame atomic absorption spectrometric determination of metal ions.

A solid phase extraction method for enrichment-separation and the determination of cobalt (Co(2+)), copper (Cu(2+)), nickel (Ni(2+)), zinc (Zn(2+)) and lead (Pb(2+)) ions in real samples has been proposed. The influences of some analytical parameters like pH, flow rate, eluent type and interference of matrix ions on recoveries of analytes were optimized. The limits of detection were found in the range of 1.6-3.9 µg L(-1), while preconcentration factor for all understudy metal ions were found to be 166 with loading half time (t 1/2) less than 10 min. The procedure was applied for the enrichment-separation of analyte ions in environmental samples with recoveries higher than 94.8% and relative SD <4.9% (N = 5).