RESUMO
PURPOSE: Traditionally, less rigid fixation techniques have been applied to the pediatric cervical spine. There is a lack of long-term outcome data for rigid fixation techniques. The purpose of this study was to define the clinical outcome and safety of posterior instrumented fusion in the pediatric population using adult posterior instrumentation. METHODS: A multicenter, retrospective review of pediatric patients who underwent posterior cervical fusion using a 3.5 mm posterior cervical system for any indication was performed. Outcome parameters included complications, revision and fusion rates, operative time (OR), blood loss, and postoperative neurologic status. Outcomes were compared between patient groups (posterior only versus anterior/posterior approach, short versus intermediate versus long fusion, and between different etiologies) using Mann-Whitney and chi-square test. RESULTS: Seventy-nine patients with a mean age of 9.9 years and mean follow-up of 2.8 years were included. At baseline 44 (56%) had an abnormal neurologic exam. Congenital deformities and basilar invagination were the most common indications for surgery. Posterior-only surgery was performed in 71 (90%) cases; mean number of levels fused was 4 (range 1-15). Overall, 4 (5%) operative complications and 4 (5%) revisions were reported at an average postoperative time of 2.6 years. Neurologic status remained unchanged in 74%, improved in 23%, and worsened in 3%. When comparing outcome measures between the various groups, 2 significant differences were found: OR was longer in the anterior/posterior approach group and decline of neuro status was more frequent in the long fusion group. CONCLUSION: Posterior cervical fusion with an adult 3.5 mm posterior cervical system was safe in this cohort of 79 pediatric patients irrespective of surgical technique, fusion length, and etiology, resulting in a high fusion and low complication/revision rate.
Assuntos
Doenças da Coluna Vertebral , Fusão Vertebral , Humanos , Criança , Adulto , Fusão Vertebral/métodos , Resultado do Tratamento , Doenças da Coluna Vertebral/cirurgia , Estudos Retrospectivos , Vértebras Cervicais/cirurgiaRESUMO
Chordoma, a rare, locally aggressive tumor can affect the central skull base, usually centered at the midline. Complete surgical resection remains mainstay of therapy in case of primary as well as recurrent tumors. Owing to their secluded location, surgical resection of skull base chordomas remains a challenge, even though the recent advancement of endoscopic endonasal approaches has had a significant positive impact on the management of these patients. Endoscopic endonasal approaches have been shown to significantly reduce surgical morbidity when compared to traditional open approaches; however, the classical endoscopic transclival midline approach fails to sufficiently expose parts of many skull base chordomas. More recent refinements of the technique, such as the interdural pituitary transposition and posterior clinoidectomy, the transpterygoid plate approach and the transcondylar far medial approach enable the surgeon the increase the resection rate in these patients. This retrospective case series focuses on anatomical aspects in the surgical management of patients with skull base chordomas. We outline the surgical anatomy of contemporary endoscopic approaches to the skull base based intraoperative illustrations as well as pre- and postoperative 3D reconstructed CT and MR images if our patients. This article should help the clinical choose the most appropriate approach and be aware of relevant anatomy as well as potential shortcomings of a given approach.
Assuntos
Cordoma , Neoplasias da Base do Crânio , Cordoma/patologia , Cordoma/cirurgia , Fossa Craniana Posterior , Humanos , Recidiva Local de Neoplasia , Estudos Retrospectivos , Base do Crânio , Neoplasias da Base do Crânio/patologia , Neoplasias da Base do Crânio/cirurgiaRESUMO
OBJECTIVE: To compare surgical outcomes between seven different approaches for thoracolumbar corpectomy/spondylectomy in the setting of spinal metastasis. METHODS: A systematic review of literature was performed including articles on corpectomy for thoracolumbar spinal metastasis. Data were extracted and sorted by surgical approach: en bloc spondylectomy (group 1), transpedicular (group 2), costotransversectomy (group 3), mini-open retropleural/retroperitoneal (group 4a), lateral extracavitary approach (group 4b), open transthoracic/transretroperitoneal (group 5), and thoracoscopic (group 6). Comparison of demographics, blood loss, directly procedure related complications, operating time, and postoperative improvement of pain. RESULTS: A total of 63 articles were included comprising data of 774 patients with various primary tumor entities. Mean age was 51.8 years, 54% of patients were female, on average 1.46 levels were treated per patient, and mean follow-up was 1.59 years. The following statistically significant findings were observed: Blood loss was lowest for the mini-open retropleural/retroperitoneal (917 ml), thoracoscopic (1107 ml) and transthoracic approach (1172 ml) versus the posterior approach groups (1633-2261 ml); directly procedure related complications were lowest for mini-open retropleural/retroperitoneal and thoracoscopic approach (0% each) versus 7-15% in the other groups; operating time was lowest in mini-open retropleural/retroperitoneal approach (184 min) versus 300-588 min in the other groups. CONCLUSION: Less invasive approaches (mini-open retropleural/retroperitoneal and thoracoscopic) not only had superior outcome in terms of blood loss and operating time, but also were shown to be safe techniques in cancer patients with low rates of procedure-related complications. These slides can be retrieved under Electronic Supplementary Material.
Assuntos
Procedimentos Ortopédicos , Neoplasias da Coluna Vertebral , Feminino , Humanos , Vértebras Lombares/cirurgia , Masculino , Pessoa de Meia-Idade , Neoplasias da Coluna Vertebral/secundário , Neoplasias da Coluna Vertebral/cirurgia , Vértebras Torácicas/cirurgia , Resultado do TratamentoRESUMO
The subtemporal approach provides a narrow operative corridor to the crus cerebrum and adjacent structures of the crural, interpeduncular, and ambient cistern. Addition of a zygomatic osteotomy widens this narrow corridor and spares retraction of the temporal lobe. We investigate and compare the morphometric parameters of the subtemporal approach with versus without zygomatic osteotomy. On each side of four cadaveric heads, a temporal craniotomy was performed to gain access to the crus cerebrum and adjacent subarachnoid cisterns using a subtemporal approach. Operative corridor width and corridor working angle were measured with and without brain retraction on each specimen side. Next, a zygomatic osteotomy was performed followed by full downward reflection of the temporalis muscle and further drilling of the squamous part of the temporal bone. Lastly, operative corridor width and corridor working angle were measured again for comparison. The subtemporal operating corridor was (mean/SD): 5.8/2.6 mm without retraction, 11.4/4.3 mm with retraction, and 13.5/6.5° working angle. After addition of a zygomatic osteotomy, the operative corridor was 8/9.2/4.3 mm without retraction, 14.7/4.5 mm with retraction, 31.8/3.1° working angle. Zygomatic osteotomy significantly increased the operative corridor working angle of the subtemporal approach. Furthermore, we demonstrate a direct approach into the interpeduncular fossa. Clin. Anat. 32:710-714, 2019. © 2019 Wiley Periodicals, Inc.
Assuntos
Mesencéfalo/anatomia & histologia , Zigoma/anatomia & histologia , Cadáver , Craniotomia/métodos , Humanos , Mesencéfalo/cirurgia , Procedimentos Neurocirúrgicos/métodos , Osteotomia/métodos , Lobo Temporal/anatomia & histologia , Lobo Temporal/cirurgia , Zigoma/cirurgiaRESUMO
INTRODUCTION: In selected cases, microsurgical clipping remains a valuable treatment alternative to endovascular occlusion of anterior communicating artery (AComA) aneurysms. Their clipping is challenging and carries a risk of postsurgical cognitive impairment. We evaluate the microsurgical anatomy of a new, minimally invasive combined interhemispheric-subfrontal approach to the AComA complex via a medial supraorbital craniotomy. METHODS: In this descriptive anatomic study, four alcohol-embedded, silicon-injected human cadaver heads were used. In each of the two cadavers, the AComA complex was approached from either the right or left side. An operating microscope and standard microsurgical instruments were used. RESULTS: After a medial eyebrow incision, a medial supraorbital minicraniotomy was performed. The frontal sinus was opened and cranialized. Following the dural opening, a subfrontal arachnoid dissection was performed to identify the optico-carotid complex. By following the A1 segment, a low-lying AComA complex could be visualized. Shifting the corridor towards the midline enabled an interhemispheric dissection. This dissection resulted in a wide superior-inferior corridor. Higher-lying AComA complexes could also be visualized. The achieved exposure of the AComA complex would allow safe dissection and clipping of low- and high-lying AComA aneurysms, with minimal retraction and preservation of the surrounding anatomical structures, in particular the perforators. CONCLUSIONS: We demonstrate the anatomy of a novel approach for surgical clipping of AComA aneurysms. Our study suggests that this approach provides good exposure without concomitant structural and vascular injury and thus might reduce the risk of procedure-related morbidity.
Assuntos
Artéria Cerebral Anterior/cirurgia , Craniotomia/métodos , Aneurisma Intracraniano/cirurgia , Microcirurgia/métodos , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , HumanosRESUMO
OBJECTIVE: This study aimed to investigate whether and to what degree leptomeningeal collateral flow as detected on angiography influences the prognostic value of computed tomography perfusion-estimated mismatch in interventional treatment of acute anterior circulation stroke. METHODS: Thirty-eight consecutive patients with acute anterior circulation stroke who received interventional neuroradiologic treatment were assigned one of 2 groups depending on the patient's degree of collateral flow (18 patients with poor collaterals, 20 patients with high degree collaterals) according to the American Society of Interventional and Therapeutic Neuroradiology/Society of Interventional Radiology grading system. In a multiregression model, we investigated a possible interaction between 2 independent variables mismatch ratio and degree of collateral flow using a "centered" variable approach. RESULTS: The mismatch ratio per se showed a significant correlation with final clinical outcome (ß coefficient, -0.79; P = 0.02); whereas, there was no interaction shown between mismatch degree of collateral flow (ß coefficient, 0.54; P = 0.1). CONCLUSIONS: This study suggests that the predictive value of computed tomography perfusion-estimated mismatch is not influenced by the degree of leptomeningeal collateral flow.
Assuntos
Circulação Cerebrovascular , Meninges/irrigação sanguínea , Acidente Vascular Cerebral/fisiopatologia , Idoso , Feminino , Humanos , Masculino , Prognóstico , Estudos Retrospectivos , Acidente Vascular Cerebral/diagnóstico por imagem , Acidente Vascular Cerebral/cirurgia , Trombectomia , Tomografia Computadorizada por Raios X , Resultado do TratamentoRESUMO
Introduction: Transpedicular screw placement has superior pullout strength compared to alternative forms of spinal fusion and is often performed in deformity correction surgery with navigation for optimal accuracy and reliability. Freehand technique for pedicle screws minimizes operation time and radiation exposure without fluoroscopy but is not widely adopted given the challenge of difficult anatomical corridors and accurate placement, especially in idiopathic scoliosis and advanced deformity. We used a computer-generated model to assess a proof-of-concept and anatomical feasibility of a freehand screw technique in severe scoliosis. Methods: Three-dimensional (3D) reconstructions of vertebra from a sample of two male patients with severe idiopathic scoliosis deformity (1 thoracic and 1 lumbar) with Cobb angles of 100° were used for planned placement of 17 levels of thoracolumbar (6.5 mm × 45 mm) pedicle screws. 3D reconstruction of each vertebra was created and measurements of screw entries and trajectories were reproduced with a 3D slicer software image computing platform. Results: Accurate transpedicular screw placement is possible with anatomical landmarks based on the 3D reconstructed vertebral levels. A series of 5 figures were assembled to demonstrate sagittal, coronal, and axial planes and key anatomical landmarks and trajectories of thoracic and lumbar freehand pedicle screws in severe idiopathic scoliosis. Conclusions: Anatomical landmarks for freehand transpedicular screw placement (between pedicle, lamina, and superior articulating process) are constant and reliable in severe idiopathic scoliosis as evidenced by 3D computer modeling. Preoperative computed tomography modeling may assist appropriate screw entry and trajectory based on anatomical landmarks for spine surgeons, and guide freehand technique for screw placement in adolescent idiopathic scoliosis.
RESUMO
Patients suffering from ankylosing spondylitis are not only predisposed to the development of rigid cervicothoracic deformities but are also at an increased risk of cervical fractures. Deformity correction and stabilization are particularly challenging in this patient population due to the brittle bone quality and low bone mineral density. Thoracic pedicle subtraction osteotomy is a workhorse approach for the correction of focal severe kyphotic deformity with lower complication rates than 3-column osteotomy. Successful execution of an upper thoracic PSO requires careful presurgical planning as well as anticipation of the patient's postoperative needs. Here, we describe the use of a T1 PSO in the correction of a rigid cervicothoracic chin-on-chest deformity in a patient with AS. The risk of implant failure was reduced by the use of a multi-rod construct, navigated cervical pedicle screws, and dual-pitched thoracic pedicle screws.
Assuntos
Cifose , Parafusos Pediculares , Humanos , Cifose/diagnóstico por imagem , Cifose/cirurgia , Cifose/etiologia , Parafusos Pediculares/efeitos adversos , Vértebras Torácicas/cirurgia , Pescoço , Osteotomia/efeitos adversos , Resultado do TratamentoRESUMO
STUDY DESIGN: Surgical technique video. OBJECTIVE: To report a surgical technique to revise patients with previous fusions at L4-S1 leading to an iatrogenic flat back and sagittal imbalance using L5-S1 transforaminal interbody fusion combined with a small S1 corner osteotomy. BACKGROUND: This is a case of a woman (51 y old) with a history of multiple lumbar surgeries, severe back pain, sagittal imbalance, and loss of lordosis. METHODS: We describe a feasible revision technique in a complex patient with the goal of attaining optimal distribution of lumbar lordosis and sagittal balance through a modified S1 pedicle subtraction osteotomy, and the use of an interbody cage to enhance the fusion rate and facilitate closure of the 3-column osteotomy. RESULTS: The preoperative patient lordosis angle of 31 degrees at L1-L4 and 16 degrees at L4-S1 became 12 degrees at L1-L4 and 44 degrees at L4-S1 postoperatively. CONCLUSION: The combination of L5-S1 transforaminal interbody fusion and S1 corner osteotomy is a feasible technique for the restoration of lumbar lordosis in patients with previous fusion and consequent loss of lordosis.
Assuntos
Vértebras Lombares , Osteotomia , Fusão Vertebral , Humanos , Osteotomia/métodos , Feminino , Pessoa de Meia-Idade , Fusão Vertebral/métodos , Vértebras Lombares/cirurgia , Vértebras Lombares/diagnóstico por imagem , Lordose/cirurgia , Lordose/diagnóstico por imagem , Sacro/cirurgia , Sacro/diagnóstico por imagemRESUMO
BACKGROUND CONTEXT: Osteolytic lesions caused by infection or metastatic disease of the spine can induce instability. Different surgical strategies are available to restore stability in this scenario, however little is known how various reconstruction techniques affect spinal biomechanics. PURPOSE: To analyze and quantify the biomechanical effects of three different surgical reconstruction techniques in the treatment of a T12 osteolytic model. STUDY DESIGN/SETTING: Finite element analysis of the thoracic spine with a T12 osteolytic lesion. METHODS: Using CT scans from a 20-year-old man without structural deformity, simulation of an osteolytic lesion with a 50% defect at the posterior aspect of T12 vertebral body was created by a 490 N vertical force to T9. Next, three common instrumentation techniques treating the osteolytic lesion were modeled and biomechanically tested. These included: Model A, corpectomy with short segment fixation (T11-L1) and two long-segment instrumentations; Model B long segment fixation with triple rod construct; Model C long segment fixation with dual rod construct. A load of 480N was then applied on the spine models in vertically downward direction on T9. Von Mises stresses were measured (MPa) in the discs, vertebrae, and implants. RESULTS: Model A demonstrated the lowest stress on construct material, adjacent vertebral bodies, and discs but increased stress on the instrumented vertebrae. Model B was more rigid and demonstrated lower construct stress compared to Model C. However, Model C had the lowest vertebral body stress in flexion, extension, and lateral bending in the most upper instrumented vertebral body, but the highest screw pull-out stress when compared to Model A and Model B. CONCLUSIONS: This osteolytic T12 model provides unique biomechanical data that can help to tailor surgical strategies in select scenarios. While optimal outcomes are best achieved with a construct tailored to a specific patient's need for stabilization, our findings can be generalized for instances of cancerous lesions, low bone density, and infectious causes. CLINICAL RELEVANCE: The results of this study can help with the choice of appropriate surgical reconstruction technique based on patient-specific characteristics.
RESUMO
OBJECTIVE: The authors present a finite element analysis (FEA) evaluating the mechanical impact of C1-2 hypermobility on the spinal cord. METHODS: The Code_Aster program was used to perform an FEA to determine the mechanical impact of C1-2 hypermobility on the spinal cord. Normative values of Young's modulus were applied to the various components of the model, including bone, ligaments, and gray and white matter. Two models were created: 25° and 50° of C1-on-C2 rotation, and 2.5 and 5 mm of C1-on-C2 lateral translation. Maximum von Mises stress (VMS) throughout the cervicomedullary junction was calculated and analyzed. RESULTS: The FEA model of 2.5 mm lateral translation of C1 on C2 revealed maximum VMS for gray and white matter of 0.041 and 0.097 MPa, respectively. In the 5-mm translation model, the maximum VMS for gray and white matter was 0.069 and 0.162 MPa. The FEA model of 25° of C1-on-C2 rotation revealed maximum VMS for gray and white matter of 0.052 and 0.123 MPa. In the 50° rotation model, the maximum VMS for gray and white matter was 0.113 and 0.264 MPa. CONCLUSIONS: This FEA revealed significant spinal cord stress during pathological rotation (50°) and lateral translation (5 mm) consistent with values found during severe spinal cord compression and in patients with myelopathy. While this finite element model requires oversimplification of the atlantoaxial joint, the study provides biomechanical evidence that hypermobility within the C1-2 joint leads to pathological spinal cord stress.
Assuntos
Análise de Elementos Finitos , Instabilidade Articular , Medula Espinal , Humanos , Medula Espinal/fisiopatologia , Instabilidade Articular/fisiopatologia , Articulação Atlantoaxial/fisiopatologia , Fenômenos Biomecânicos/fisiologia , Vértebras Cervicais/fisiopatologia , Estresse Mecânico , Substância Branca/fisiopatologia , Substância Branca/diagnóstico por imagem , Rotação , Módulo de ElasticidadeRESUMO
BACKGROUND: Biodegradable materials that dissolve after aneurysm healing are promising techniques in the field of neurointerventional surgery. We investigated the effects of various bioabsorable materials in combination with degradable magnesium alloy stents and evaluated aneurysm healing in a rat aneurysm model. METHODS: Saccular aneurysms were created by end-to-side anastomosis in the abdominal aorta of Wistar rats. Untreated arterial grafts were immediately transplanted (vital aneurysms) whereas aneurysms with loss of mural cells were chemically decellularized before implantation. All aneurysms were treated with biodegradable magnesium stents. The animals were assigned to vital aneurysms treated with stent alone or decellularized aneurysms treated with stent alone, detachable coil, or long-term or short-term biodegradable thread. Aneurysm healing, rated microscopically and macroscopically at follow-up days 7 and 21, was defined by both neointima formation and absence of aneurysm volume increase over time. RESULTS: Of 56 animals included, significant increases in aneurysm volume 7 days after surgery were observed in aneurysms with vital and decellularized walls treated with a stent only (P=0.043 each group). Twenty-one days after surgery an increase in aneurysm volume was observed in decellularized aneurysms treated with long- and short-term biodegradable threads (P=0.027 and P=0.028, respectively). Histological changes associated with an increase in aneurysm volume were seen for aneurysm wall inflammation, periadventitial fibrosis, and luminal thrombus. CONCLUSIONS: An increase in aneurysm volume was associated with an absence of intrasaccular embolization material (early phase) and the breakdown of intrasaccular biodegradable material over time (late phase). Thrombus remnant and aneurysm wall inflammation promote aneurysm volume increase.
RESUMO
STUDY DESIGN: Retrospective quantitative analysis study. OBJECTIVES: Pelvic incidence has been established as central radiographic marker which determines patient-specific correction goals during surgery for adult spinal deformity. In cases with sacral doming or sacral osteotomy where the PI cannot be calculated, reliable radiographic parameters need to be established to determine surgical goals. We aim to determine multiple radiographic parameters and formulas that can be utilized when the S1 superior endplate is obscured. METHODS: Retrospective analysis was performed on 68 healthy volunteers without prior spine surgery with full-length radiographs. Pelvic incidence, sacral slope, and pelvic tilt were calculated for each patient. Additional measurements such as L4, L5, and S2 incidence, tilt, and slope were collected. A new radiographic parameter defined as the L4-Sciatic notch angle was measured. Regression analysis was performed on each value to determine its relationship with S1 based incidence, tilt, and slope. RESULTS: Mean values for L5 incidence, L4 incidence, and L4 sciatic notch angle were 21.8° ± 8.9, 4.4° ± 8.1, and 44.4° ± 12, respectively. The linear regression analysis produced the following formulas which can be utilized to determine deformity correction goals when pelvic incidence can be calculated pre-operatively: L5i = .65*S1i-11.4, L4i = .44*S1i-18.6, and L4SNA = -.34*S1i + 66.5. In settings where pelvic incidence cannot be calculated, the following formulas can be utilized: L5i = .66*S2i-32.3 and L4SNA = -.02*S2i2 + 1.1*S2i + 63.5. P-values for all regression analyses were <.001. CONCLUSION: This study provides target radiographic alignment values that can be utilized for patients with either pre-operative altered S1 endplates or in cases with intraoperative alteration of S1 (sacral osteotomy).
RESUMO
Study Design: Prospective human anatomical study. Objective: Occipitocervical fusion with occipital plate or condyle screws has shown higher failure rates in those with skeletal dysplasia. The modified occipital condyle screw connects the occipital condyle to the pars basilaris of the occipital bone that may achieve fortified bony purchase and serve as a more rigid fixation point. We evaluate anatomical feasibility of a novel cranial fixation technique designed to decrease risk of pseudarthrosis. Materials and Methods: Occipital condyles were analyzed morphologically using multiplanar three-dimensional reconstructed, ultra-thin section computed tomography. The following parameters were obtained: occipital condyle length, maximal cross section, location of hypoglossal canal, axial and sagittal orientation of the long axis, occipital condyle pedicle (OCP) diameter, maximal length of OCP screw, and entry point. Results: Forty patients with total of 80 occipital condyles were analyzed and the following measurements were obtained: occipital condyle length 24.1 mm (20.5-27.7, standard deviation [SD]: 2.2); condyle maximum axial cross-section 12.6 mm (9-15.8, SD: 1.9); length of OCP screw 38.9 mm (29.3-44, SD: 5.7); diameter of OCP 3.4 mm (3.2-3.6, SD: 0.2); clearance below hypoglossal canal 4.5 mm (3.4-7, SD: 1.1); and distance of screw entry point from condylar foramen 2 mm (range 0-4, SD 1.6). Conclusion: The modified occipital condyle screw connects the condyle with the clivus through the pars basilaris and represents a safe and technically feasible approach to achieve craniocervical fusion in skeletally mature individuals. This cephalad anchor point serves as an alternate fixation point of the occipitocervical junction with increased strength of construct and decreased risk of hardware failure or pseudarthrosis given cortical bone purchase and longer screw instrumentation.
RESUMO
Context: Anterior craniocervical junction lesions have always been a challenge for neurosurgeons. Presenting with lower cranial nerve dysfunction and symptoms of brainstem compression, decompression is often required. While posterior approaches offer indirect ventral brainstem decompression, direct decompression via odontoidectomy is necessary when they fail. The transoral and endoscopic endonasal approaches have been explored but come with their own limitations and risks. A novel retropharyngeal approach to the cervical spine has shown promising results with reduced complications. Aims: This study aims to explore the feasibility and potential advantages of the anterior retropharyngeal approach for accessing the odontoid process. Methods and Surgical Technique: To investigate the anatomical aspects of the anterior retropharyngeal approach, a paramedian skin incision was performed below the submandibular gland on two cadaveric specimens. The subcutaneous tissue followed by the platysma is dissected, and the superficial fascial layer is opened. The plane between the vascular sheath laterally and the pharyngeal structures medially is entered below the branching point of the facial vein and internal jugular vein. After reaching the prevertebral plane, further dissection cranially is done in a blunt fashion below the superior pharyngeal nerve and artery. Various anatomical aspects were highlighted during this approach. Results: The anterior, submandibular retropharyngeal approach to the cervical spine was performed successfully on two cadavers highlighting relevant anatomical structures, including the carotid artery and the glossopharyngeal, hypoglossal, and vagus nerves. This approach offered wide exposure, avoidance of oropharyngeal contamination, and potential benefit in repairing cerebrospinal fluid fistulas. Conclusions: For accessing the craniocervical junction, the anterior retropharyngeal approach is a viable technique that offers many advantages. However, when employing this approach, surgeons must have adequate anatomical knowledge and technical proficiency to ensure better outcomes. Further studies are needed to enhance our anatomical variations understanding and reduce intraoperative risks.
RESUMO
Background Surgical treatment of ventral and ventrolateral lesions of the craniocervical junction are among the most challenging neurosurgical pathologies to treat. Three surgical techniques, the far lateral approach (and its variations), the anterolateral approach, and the endoscopic far medial approach can be used to approach and resect lesions in this area. Objective The aim of the study is to examine the surgical anatomy of three skull base approaches to the craniocervical junction and review surgical cases to better understand the indications and possible complications for each of these approaches. Methods Cadaveric dissections with standard microsurgical and endoscopic instruments were performed for each of the three surgical approaches, and key steps and surgically relevant anatomy were documented. Six patients with appropriate pre-, post-, and intraoperative imaging and video documentation are presented and discussed accordingly. Results Based on our institutional experience, all three approaches can be utilized to safely and effectively approach a wide variety of neoplastic and vascular pathology. Unique anatomical characteristics, lesion morphology and size, and tumor biology should all be considered when determining the optimal approach. Conclusion Preoperative assessment of surgical corridors with 3D illustrations helps to define the best surgical corridor. 360 degree knowledge of the anatomy of craniovertebral junction allows safe surgical approach and treatment of ventral and ventrolateral located lesions using one of the three approaches.
RESUMO
Background: Tumors of the vertebral column consist of primary spinal tumors and malignancies metastasizing to the spine. Although primary spine tumors are rare, metastases to the spine have gradually increased over past decades because of aging populations and improved survival for various cancer subtypes achieved by advances in cancer therapy. Metastases to the vertebral column occur in up to 70% of cancer patients, with 10% of patients demonstrating epidural spinal cord compression. Therefore, many cancer patients may face spinal surgical intervention during their chronic illness; such interventions range from simple cement augmentation over decompression of neural elements to extended instrumentation or spinal reconstruction. However, precise surgical treatment guidelines do not exist, likely due to the lack of robust, long-term clinical outcomes data and the overall heterogeneous nature of spinal tumors. Objectives of launching the Swiss Spinal Tumor Registry (Swiss-STR) are to collect and analyze high-quality, prospective, observational data on treatment patterns, clinical outcomes, and health-related quality of life (HRQoL) in adult patients undergoing spinal tumor surgery. This narrative review discusses our rationale and process of establishing this spinal cancer registry. Methods: A REDCap-based registry was created for the standardized collection of clinical, radiographic, surgical, histological, radio-oncologial and oncological variables, as well as patient-reported outcome measures (PROMs). Discussion: We propose that the Swiss-STR will inform on the effectiveness of current practices in spinal oncology and their impact on patient outcomes. Furthermore, the registry will enable better categorization of the various clinical presentations of spinal tumors, thereby facilitating treatment recommendations, defining the socio-economic burden on the healthcare system, and improving the quality of care. In cases of rare tumors, the multi-center data pooling will fill significant data gaps to yield better understanding of these entities. Finally, our two-step approach first implements a high-quality registry with efficient electronic data capture strategies across hospital sites in Switzerland, and second follows with potential to expand internationally, thus fostering future international scientific collaboration to further push the envelope in cancer research.
RESUMO
OBJECTIVE: Both under- and overcorrection are risk factors for junctional failure after deformity correction. This study investigates which factors determine the segmental radiographic outcome in mini-open lateral deformity surgery. METHODS: A single-center operative database was searched for patients undergoing multilevel mini-open lateral corrective surgery of degenerative spinal deformities. Preoperative and postoperative whole spine x-rays and computed tomography scans were compared for change in global and segmental alignment parameters. Linear regression analyses were performed to study the impact of surgical level, preoperative segmental sagittal Cobb angle, presence of bridging osteophytes, disc height, ankylosis of facet joints, and implantation site of the interbody device on postoperative increase in segmental lordosis, foraminal height, and foraminal width. RESULTS: A total of 49 patients were identified with a mean age of 68.7 years. At a mean, 4.2 segments were fused using a lateral approach, while the posterior stage comprised either minimally invasive surgery or open instrumentation. Upper instrumented vertebra was L2 (range T4-L3), and lower instrumented vertebra was L5 (range L4-pelvis) in most cases. Mean radiographic values pre- and postoperatively were as follows: C7 sagittal vertical axis +79.6 mm, +60 mm; lumbar lordosis 32.9°, 41.6°; pelvic tilt 21.1°, 21.8°; global coronal Cobb 16.3°, 10.8°; increase in segmental sagittal Cobb angle was significantly and inversely correlated with preoperative sagittal Cobb and positively correlated with preoperative coronal Cobb angle. No other variable showed significant correlations. Preoperative foraminal width and height showed significant and inverse correlation with change in postoperative foraminal width and height. CONCLUSION: Segmental sagittal correction is significantly influenced by preoperative loss of lordosis and coronal Cobb angle. Neither presence of osteophytes nor ankylosed facet joints, disc height, or implantation site of the interbody device had an influence on sagittal alignment goals. Only preoperative foraminal dimensions impact inversely the degree of foraminal decompression; no other factor investigated showed significant impact. CLINICAL RELEVANCE: Only preoperative lordosis and coronal Cobb angle influence sagittal correction.
RESUMO
INTRODUCTION: Adult spinal deformity (ASD) results in significant patient morbidity and burden to quality of life. The degree to which systemic risk factors and comorbidities that contribute to ASD affect specific spinopelvic parameters is not well-documented. We determine the extent to which preoperative risk factors may contribute to spinopelvic parameters associated with ASD. METHODS: Retrospective single-center study of 48 patients with ASD. Analysis of variance (ANOVA) linear regression analysis was performed to evaluate correlation between systemic comorbidities (obesity, arterial hypertension (HTN), hyperlipidemia (HLD), cardiomyopathy, diabetes mellitus (DM), chronic obstructive pulmonary disease (COPD), and asthma) and the following radiographic parameters: pelvic incidence (PI), lumbar lordosis (LL), C7 sagittal vertical axis (C7SVA), and the T10-L2 sagittal cobb angle. RESULTS: A total of 48 patients were included with mean C7SVA of 79.6 mm (SD: 63, range: 43-254), mean LL of 32.9° (SD: 15.9, range: -14 to 78), T10-L2 sagittal cobb angle of 3° (SD: 12.7, range: -24 to 30), and PI was 49° (SD: 10.7, range: 21 to 77). Only DM correlated with sagittal imbalance with high C7SVA and PI-LL mismatch. The beta coefficient for DM and preoperative C7SVA was 0.49, t=3.16, p=0.003, preoperative PI-LL mismatch standardized beta coefficient was -0.4, t=-2.38, p=0.022, and preoperative T10-L2 sagittal cobb standard beta coefficient was -0.07, t=-0.46, p=0.645. No significant correlations were found for asthma, COPD, HTN, HLD, or cardiomyopathy. CONCLUSIONS: Diagnosis of DM was found to correlate with pathologic C7SVA and significant PI-LL mismatch associated with ASD. HTN, HLD, cardiomyopathy, obesity, and pulmonary disease did not correlate with radiographic findings of sagittal imbalance.