Ex Situ Covalent Functionalization of Germanene via 1,3-Dipolar Cycloaddition: A Promising Approach for the Bandgap Engineering of Group-14 Xenes.

Group-14 Xenes beyond graphene such as silicene, germanene, and stanene have recently gained a lot of attention for their peculiar electronic properties, which can be tuned by covalent functionalization. Up until now, reported methods for the top-down synthesis of covalently functionalized silicene and germanene typically yield multilayered flakes with a minimum thickness of 100 nm. Herein, the ex situ covalent functionalization of germanene (fGe) is reported via 1,3-dipolar cycloaddition of the azomethine ylide generated by the decarboxylative condensation of 3,4-dihydroxybenzaldehyde and sarcosine. Amorphous few-layered sheets (average thickness of ≈6 nm) of dipolarophile germanene (GeX) are produced by thermal dehydrogenation of its fully saturated parent precursor, germanane (GeH). Spectroscopic evidence confirmed the emergence of the dipolarophilic sp2 domains due to the dehydrogenation of germanane, and their sp3 hybridization due to the covalent functionalization of germanene. Elemental mapping of the functionalized germanene revealed flakes with a very high abundance of carbon uniformly covering the germanium backbone. The 500 meV increase of the optical bandgap of germanene observed upon functionalization paves the way toward bandgap engineering of other group-14 Xenes, which could potentially be a major turning point in the fields of electronics, electrocatalysis, and photocatalysis.

Eco-friendly spark-generated CoxOy nanoparticle-modified graphite screen-printed sensing surfaces for the determination of H2O2 in energy drinks.

The modification of graphite screen-printed electrodes (SPEs) is reported using an eco-friendly and extremely fast method based on the direct cobalt pin electrode-to-SPE spark discharge at ambient conditions. This approach does not utilize any liquids or chemical templates, does not produce any waste, and allows the in-situ generation of CoxOy nanoparticles onto the electrode surface and the development of efficient electrocatalytic sensing surfaces for the determination of H2O2. Co-spark SPEs were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy and x-ray photoelectron spectroscopy (XPS), revealing the formation of surface confined CoxOy nanoparticles and the diverse oxidation states of cobalt species. Co-spark SPEs were also characterized with cyclic voltammetry and electrochemical impedance spectroscopy. Redox transitions of the surface confined electrocatalysts are demonstrated by electrochemical polarization studies, showing the formation of different oxides (CoxOy), varying the XPS results. Amperometric measurements at 0.3 V vs. Ag/AgCl revealed a linear relationship between the current response and the concentration of H2O2 over the range 1 - 102 µM, achieving a limit of detection (3σ/m) of 0.6 µM. The interference effect of various electroactive species was effectively addressed by employing dual measurements in the absence and presence of the enzyme catalase. The analytical utility of the method was evaluated in antioxidant rich real-world samples, such as energy drinks, demonstrating sufficient recovery.

A Strategic Synthesis of Orange Waste-Derived Porous Carbon via a Freeze-Drying Method: Morphological Characterization and Cytocompatibility Evaluation.

Porous carbon materials from food waste have gained growing interest worldwide for multiple applications due to their natural abundance and the sustainability of the raw materials and the cost-effective synthetic processing. Herein, orange waste-derived porous carbon (OWPC) was developed through a freeze-drying method to prevent the demolition of the original biomass structure and then was pyrolyzed to create a large number of micro, meso and macro pores. The novelty of this work lies in the fact of using the macro-channels of the orange waste in order to create a macroporous network via the freeze-drying method which remains after the pyrolysis steps and creates space for the development of different types of porous in the micro and meso scale in a controlled way. The results showed the successful preparation of a porous carbon material with a high specific surface area of 644 m2 g-1 without any physical or chemical activation. The material's cytocompatibility was also investigated against a fibroblast cell line (NIH/3T3 cells). OWPC triggered a mild intracellular reactive oxygen species production without initiating apoptosis or severely affecting cell proliferation and survival. The combination of their physicochemical characteristics and high cytocompatibility renders them promising materials for further use in biomedical and pharmaceutical applications.

Reliability of Maximal Strength and Peak Rate of Force Development in a Portable Nordic Hamstrings Exercise Device.

The Nordic hamstring exercise (NHE) is a very popular exercise used to improve eccentric strength and prevent injuries. The aim of this investigation was to assess the reliability of a portable dynamometer that measures maximal strength (MS) and rate of force development (RFD) during the NHE. Seventeen physically active participants (34.8 ± 4.1 years; n = 2 women and n = 15 men) participated. Measurements occurred on two different days separated by 48-72 h. Test-retest reliability was calculated for bilateral MS and RFD. No significant test-retest differences were observed in NHE (test-retest [95% CI, confidence interval]) for MS [-19.2 N (-67.8; 29.4); p = 0.42] and RFD [-70.4 N·s-1 (-178.4; 37.8); p = 0.19]. MS showed high reliability (intraclass correlation coefficient [ICC] [95% CI], =0.93 [0.80-0.97] and large within-subject correlation between test and retest [r = 0.88 (0.68; 0.95)]. RFD displayed good reliability [ICC = 0.76 (0.35; 0.91)] and moderate within-subject correlation between test and retest [r = 0.63 (0.22; 0.85)]. Bilateral MS and RFD displayed a coefficient of variation of 3.4% and 4.6%, respectively, between tests. The standard error of measurement and the minimal detectable change for MS was 44.6 arbitrary units (a.u.) and 123.6 a.u., and 104.6 a.u. and 290.0 a.u. for peak RFD. This study shows that MS and RFD can be measured for NHE using a portable dynamometer. However, not all exercises are suitable to apply to determine RFD, so caution must be taken when analyzing RFD during NHE.

Neuromuscular Performance Changes in Elite Futsal Players Over a Competitive Season.

ABSTRACT: Spyrou, K, Alcaraz, PE, Marín-Cascales, E, Herrero-Carrasco, R, Cohen, DD, and Freitas, TT. Neuromuscular performance changes in elite futsal players over a competitive season. J Strength Cond Res 37(5): 1111-1116, 2023-A professional futsal season imposes a great amount of physiological and mechanical stress on players. The main aim of this study was to examine the changes in neuromuscular performance qualities across the season. Ten professional male players performed a 10-m sprint, standing long jumps (SLJs), and countermovement jumps (CMJs) during the competitive season (i.e., every ∼5 weeks from September to January). A one-way repeated measures ANOVA with post hoc pairwise comparisons and effect sizes (ESs) were used to analyze potential differences among these assessments. A significant and large decline was found in concentric peak power ( p = 0.040; ES = 1.24). A nonsignificant and moderate decrease was observed in sprint ability ( p = 0.155; ES = 1.03), CMJ height ( p = 0.175; ES = 1.00), and SLJ distance ( p = 0.164; ES = 1.03). Regarding other CMJ kinetic variables, nonsignificant and moderate changes were found. In summary, considering the neuromuscular performance tests and variables assessed, only concentric peak power in CMJ decreased significantly across the season; however, nonsignificant decrements were observed in sprinting time, SLJ, CMJ height, and other kinetic metrics. CMJ variables during the jump-land cycle should be incorporated alongside more traditional measures (e.g., jump height) to monitor performance during the season.

External match load and the influence of contextual factors in elite futsal.

Quantifying external load during futsal competition can provide objective data for the management of the athlete's performance and late-stage rehabilitation. This study aimed to report the match external load collected via wearable technology according to time periods (i.e., halves) and contextual factors (i.e., team's ranking, match result, and location) in elite futsal. Nine professional male players used a GPS-accelerometer unit during all games of the 2019-2020 season. Player load (PL), PL·min-1, high-intensity acceleration (ACCHI), deceleration (DECHI), explosive movements (EXPL-MOV), and change of direction (CODHI) data were collected. On average, players displayed values of: total PL 3868 ± 594 a.u; PL·min-1: 10.8 ± 0.8 a.u; number of ACCHI: 73.3 ± 13.8, DECHI: 68.6 ± 18.8, EXPL-MOV: 1165 ± 188 and CODHI: 173 ± 29.1. A moderate and significant decrease was found in the 2nd half for total PL (p = 0.03; ES = 0.52), PL·min-1 (p = 0.001; ES = 1.16), DECHI (p = 0.001; ES = 0.83), and EXPL-MOV (p = 0.017; ES = 0.58) compared to the 1st half. Small and nonsignificant differences were found between contextual factors. In summary, this study indicates that futsal players are exposed to high-intensity mechanical external loads, and perform a great number of ACCHI, DECHI, EXPL-MOV and CODHI, without being influenced by the team ranking, result and match location. Coaches and sports scientists are advised to implement speed-power, DEC, and COD activities in the training sessions, and may use these reference values to design specific training and return-to-play plans.

Electromyography, Stiffness and Kinematics of Resisted Sprint Training in the Specialized SKILLRUN® Treadmill Using Different Load Conditions in Rugby Players.

This study's aim was to analyze muscle activation and kinematics of sled-pushing and resisted-parachute sprinting with three load conditions on an instrumentalized SKILLRUN® treadmill. Nine male amateur rugby union players (21.3 ± 4.3 years, 75.8 ± 10.2 kg, 176.6 ± 8.8 cm) performed a sled-push session consisting of three 15-m repetitions at 20%, 55% and 90% body mas and another resisted-parachute session using three different parachute sizes (XS, XL and 3XL). Sprinting kinematics and muscle activity of three lower-limb muscles (biceps femoris (BF), vastus lateralis (VL) and gastrocnemius medialis (GM)) were measured. A repeated-measures analysis of variance (RM-ANOVA) showed that higher loads during the sled-push increased (VL) (p ≤ 0.001) and (GM) (p ≤ 0.001) but not (BF) (p = 0.278) activity. Furthermore, it caused significant changes in sprinting kinematics, stiffness and joint angles. Resisted-parachute sprinting did not change kinematics or muscle activation, despite producing a significant overload (i.e., speed loss). In conclusion, increased sled-push loading caused disruptions in sprinting technique and altered lower-limb muscle activation patterns as opposed to the resisted-parachute. These findings might help practitioners determine the more adequate resisted sprint exercise and load according to the training objective (e.g., power production or speed performance).

Effects of the COVID-19 Lockdown on Neuromuscular Performance and Body Composition in Elite Futsal Players.

ABSTRACT: Spyrou, K, Alcaraz, PE, Marín-Cascales, E, Herrero-Carrasco, R, Cohen, DD, Calleja-Gonzalez, J, Pereira, LA, Loturco, I, and Freitas, TT. Effects of the COVID-19 lockdown on neuromuscular performance and body composition in elite futsal players. J Strength Cond Res 35(8): 2309-2315, 2021-Recent world events (i.e., COVID-19 pandemic) led to an unparalleled situation in sports. Players were forced to stay at home for a prolonged period and not allowed to use their team's training facilities or even exercise outdoors. The main aim of this study was to examine the effects of the COVID-19 lockdown on neuromuscular performance and body composition in futsal players. Ten elite male players performed a 10-m sprint, horizontal and vertical jump, and body composition measurements before and after the quarantine (i.e., 70 days). Pre-post confinement differences in horizontal jump distance, countermovement jump variables, sprinting time, and body composition were analyzed by a paired sample t-test and effect sizes (ESs). A large and significant decline was observed in sprint ability (p = 0.004; ES = 1.31). Small and nonsignificant differences were found in horizontal jump performance (p = 0.243; ES = -0.39). Nonsignificant differences were observed in countermovement jump (CMJ) height (p = 0.076; ES = -0.63) but moderate-to-large significant declines were found in CMJ eccentric deceleration impulse, rate of force development, peak power, velocity, and landing peak force (p ≤ 0.05; ES = -0.52 - 1.23). Finally, trivial and nonsignificant differences were obtained on body composition parameters. In summary, sprint performance and specific CMJ kinetic variables were significantly affected by long-term reduced training, whereas vertical jump height and horizontal jump distance and body composition were not. Practitioners are advised to implement efficient sprint-oriented and eccentric-oriented training strategies to optimize return to competition after prolonged detraining periods.

Synthesis of 2D Germanane (GeH): a New, Fast, and Facile Approach.

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a ß-CaGe2 layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (Eg ) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.

Graphene Aerogel Growth on Functionalized Carbon Fibers.

Graphene aerogel (GA) is a lightweight, porous, environmentally friendly, 3D structured material with interesting properties, such as electrical conductivity, a high surface area, and chemical stability, which make it a powerful tool in energy storage, sensing, catalyst support, or environmental applications. However, the poor mechanical stability that often characterizes graphene aerogels is a serious obstacle for their use in such applications. Therefore, we report here the successful mechanical reinforcement of GA with carbon fibers (CFs) by combining reduced graphene oxide (rGO) and CFs in a composite material. The surfaces of the CFs were first successfully desized and enriched with epoxy groups using epichloridrine. Epoxy-functionalized CFs (epoxy-CFs) were further covered by reduced graphene oxide (rGO) nanosheets, using triethylene tetramine (TETA) as a linker. The rGO-covered CFs were finally incorporated into the GA, affording a stiff monolithic aerogel composite. The as-prepared epoxy-CF-reinforced GA was characterized by spectroscopic and microscopic techniques and showed enhanced electrical conductivity and compressive strength. The improved electrical and mechanical properties of the GA-CFs composite could be used, among other things, as electrode material or strain sensor applications.

Synthesis of Highly Crystalline Graphite from Spontaneous Ignition of In Situ Derived Acetylene and Chlorine at Ambient Conditions.

We exploited a classic chemistry demonstration experiment based on the reaction of acetylene with chlorine to obtain highly crystalline graphite at ambient conditions. Acetylene and chlorine were generated in-situ by the addition of calcium carbide (CaC2) in a concentrated HCl solution, followed by the quick addition of domestic bleach (NaClO). The released gases reacted spontaneously, giving bursts of yellow flame, leaving highly crystalline graphite deposits in the aqueous phase. This was a rather benign alternative towards synthetic graphite, the latter usually being prepared at high temperatures. The synthetic graphite was further utilized to obtain graphene or conductive inks.

Hypergolics in Carbon Nanomaterials Synthesis: New Paradigms and Perspectives.

Recently we have highlighted the importance of hypergolic reactions in carbon materials synthesis. In an effort to expand this topic with additional new paradigms, herein we present novel preparations of carbon nanomaterials, such-like carbon nanosheets and fullerols (hydroxylated fullerenes), through spontaneous ignition of coffee-sodium peroxide (Na2O2) and C60-Na2O2 hypergolic mixtures, respectively. In these cases, coffee and fullerenes played the role of the combustible fuel, whereas sodium peroxide the role of the strong oxidizer (e.g., source of highly concentrated H2O2). The involved reactions are both thermodynamically and kinetically favoured, thus allowing rapid product formation at ambient conditions. In addition, we provide tips on how to exploit the released energy of such highly exothermic reactions in the generation of useful work.

The effect of menthol rinsing before intermittent exercise on physiological, physical, and thermo-behavioral responses of male football referees in hot and humid environment.

Introduction: In the current experiment, we aimed to evaluate whether eliciting pre-exercise non-thermal cooling sensations would alter perceptual measures, and physical and physiological responses in football referees. Methods: Nine highly trained male football referees undertook two 45-minute intermittent exercise protocols in hot and humid conditions (34.2 ± 0.6°C, 62.5 ± 1.0% relative humidity). In a randomized counterbalanced crossover design, 1 of 2 beverages were given before the warm-up: a 0.01% menthol solution or a placebo noncaloric solution. Physical performance was quantified as total distance covered in each of the three 15-minute exercise blocks. Core temperature, heart rate, thermal sensation and thermal comfort were measured at rest and after each exercise block. Results: No changes were observed between trials and over time for distance covered. No main effect of mouth rinse was observed for core temperature and heart rate, but both increased over time in all conditions (P < 0.001). Thermal sensation and thermal comfort were significantly improved with menthol after mouth-rinsing (P < 0.05), but with no differences at any other time-point. Discussion: These results indicate that non-thermal cooling oral stimuli provide immediate behavioral changes but may not influence physiological or physical responses in football referees, during intermittent exercise in hot and humid environments. Clinical Trial Registration: www.clinicaltrials.gov, identifier NCT05632692.

DEMIGOD: A Low-Cost Microcontroller-Based Closed-Loop System Integrating Nanoengineered Sweat-Based Glucose Monitoring and Controlled Transdermal Nanoemulsion Release of Hypoglycemic Treatment with a Software Application for Noninvasive Personalized Diabetes Care.

This study endeavored to design and develop an innovative closed-loop diagnostic and therapeutic system with the following objectives: (a) the noninvasive detection of glucose concentration in sweat utilizing nanonengineered screen-printed biosensors; (b) the management of measured data through a specialized computer system comprising both hardware and software components, thereby enabling the precise control of therapeutic responses via a patch-based nanomedicine delivery system. This initiative addresses the significant challenges inherent in the management of diabetes mellitus, including the imperative need for glucose-level monitoring to optimize glycemic control. Leveraging chronoamperometric results as a foundational dataset and the in vivo hypoglycemic activity of nanoemulsion formulations, this research underscores the efficacy and accuracy of glucose concentration estimation, decision-making mechanism responses, and transdermal hypoglycemic treatment effects, within the proposed system.

SCS 6th Annual Meeting-EEVFA-11th International Congress of Biochemistry and Physiology of Exercise, Athens, Greece, 2023.

On behalf of the Strength and Conditioning Society (SCS) and the Hellenic Society of Biochemistry and Exercise Physiology (EEVFA), we are pleased to present the abstracts of the SCS 6th Annual Meeting and EEVFA-11th International Congress of Biochemistry and Physiology of Exercise. The event was held at the Hellenic Olympic Committee headquarters in Athens, Greece, on 19-22 October 2023, and comprised several invited sessions from international and national speakers on a variety of topics related to biochemistry and exercise physiology, strength and conditioning practices and their application to health, injury prevention and sports performance. These included strength training in high-performance sports, sport science and training-competition load management in elite environments, biochemistry and exercise physiology and prescription, nutrition and biomechanics, among others. The conference also included different practical workshops conducted by renowned academics and practitioners on eccentric training, change of direction ability and strength and power training in professional team-sports, and ergospirometry and exercise prescription in specific populations. Finally, the event disseminated up-to-date strength and conditioning research by providing practitioners and researchers with the opportunity to present their most recent findings. In this regard, all abstracts of the communications presented at the SCS 6th Annual Meeting-EEVFA-11th International Congress of Biochemistry and Physiology of Exercise can be found in this Conference Report.

Does Total Playing Time Affect the Neuromuscular, Physiological, and Subjective Recovery of Futsal Players during a Congested Period?

The aims of this study were to analyze the effects of a congested period (three games in four days) on countermovement (CMJ) jump-landing metrics, heart rate variability (HRV), and total recovery quality (TQR) score in under-19 male futsal players, and to detect the differences between those who played for more minutes (HIGHMIN) and less minutes (LOWMIN). Fourteen youth futsal players (age: 17.5 ± 0.5 years; body mass: 70.2 ± 8.5 kg; height: 1.80 ± 0.1 m) participated. HRV, TQR questionnaire, and CMJ metrics (i.e., CMJ height, relative peak power (PPREL), eccentric and concentric impulse, braking time, and time to peak force) were registered. A linear mixed model and effect sizes (ESs) were used to assess the differences between groups and days. Considering the total sample, a significant decrease was found in the PPREL and TQR score (p = 0.001-0.013 and ES = 0.28-0.99) on Days 2, 3, and 4 when compared to Day 1. HIGHMIN group presented a significant decrease in PPREL on Day 3 (p = 0.004; ES: 0.62; 95% CI: 0.39-2.65) when compared to Day 1, and in the TRQ score on Day 3 (p = 0.002; ES: 1.98; 95% CI: 0.18-2.46) and 4 (p = 0.003; ES: 2.25; 95% CI: 0.52-3.38) when compared to Day 1. Non-significant differences were found for the rest of the metrics and in the group LOWMIN. In summary, neuromuscular performance (i.e., CMJ PPREL) and subjective recovery were impaired in players with higher playing minutes during a match-congested period when compared to those with less on-court time.

Exploring countermovement jump variables across competitive levels and playing positions in futsal.

Introduction: The aims of this study were to compare several countermovement jump (CMJ) kinetic variables between professional (PRO) and semi-professional (SEMI-PRO) futsal players and examine the differences amongst playing positions. Methods: CMJ performance from 56 male futsal players (25.2 ± 4.8 years; weight: 74.4 ± 6.4 kg) was analysed. Players were separated into PRO (n = 29; 27.0 ± 4.4 years; 75.4 ± 6.0 kg) and SEMI-PRO (n = 27; 22.7 ± 4.3 years; 73.1 ± 6.8 kg), and according to playing position: defenders (n = 16; 25.4 ± 3.7 years; 75.2 ± 6.0 kg), wingers (n = 26; 23.5 ± 4.5 years; 72.0 ± 6.9 kg), and pivots (n = 14; 28.0 ± 5.6 years; 77.8 ± 4.3 kg). Linear mixed models and effect sizes were used for the analyses based on the mean of two jumps for each variable. Results: PRO players presented a deeper center of mass (COM) displacement (p = 0.002, ES = 0.83), greater eccentric (Ecc) absolute (p = 0.019, ES = 0.61) and relative peak power (p = 0.046, ES = 0.52), and achieved greater Ecc peak velocities (p = 0.004, ES = 0.76) when compared to SEMI-PRO. Non-significant and trivial-to-small differences were observed in all the other CMJ variables according to the competitive level and playing position. Discussion: Ecc capabilities (i.e., deeper COM displacement, greater Ecc absolute and relative peak power, and peak velocity) during vertical jump seem to differentiate PRO and SEMI-PRO players. However, CMJ variables do not discriminate amongst playing positions in futsal players.

Bridging the Gap Between Training and Competition in Elite Rink Hockey: A Pilot Study.

BACKGROUND: Monitoring training load and competition load is crucial for evaluating and improving athlete performance. This study proposes an applied approach to characterize and classify the training task specificity in relation to competition in a top-level rink hockey team, considering external and internal load from training tasks and competition. HYPOTHESIS: Training tasks and game demands have significant dose-response differences, and exercises can be classified successfully based on their physiological and biomechanical demands. STUDY DESIGN: Cross-sectional study. LEVEL OF EVIDENCE: Level 5. METHODS: Ten elite-level male rink hockey players participated in this study. Players were monitored on 6 different task categories during 8 training sessions and 2 official games. A linear mixed model with random intercepts was used to compare training tasks and competition load, accounting for individual repeated measures. A 2-step cluster analysis was performed to classify the training tasks and games based on physiological and biomechanical load, employing log-likelihood as the distance measure and Schwartz's Bayesian criterion. RESULTS: Average heartrate , maximum heartrate, and high-speed skating (18.1-30 km/h) were the best physiological load predictors, while the most effective biomechanical load predictors were impacts [8-10] g(n), decelerations [-10 to -3]m/s²(n), and accelerations [3-10]m/s²(n). Different physiological and biomechanical responses were verified between training tasks and match demands. A 4-quadrant efforts assessment for each task category revealed that training tasks used by the team in the analysis presented lower biomechanical and physiological load demands than competition. CONCLUSION: Training tasks failed to adequately replicate the specific demands of competition, especially regarding high mechanical stress, such as the absence of high-intensity impacts and decelerations. CLINICAL RELEVANCE: This method of classification of training tasks may allow coaches to understand further the specificity and contribution of each task to competition demands, consequently improving the capacity of load management and the preparedness and readiness of players for competition.

Carbon Nanodisks Decorated with Guanidinylated Hyperbranched Polyethyleneimine Derivatives as Efficient Antibacterial Agents.

Non-toxic carbon-based hybrid nanomaterials based on carbon nanodisks were synthesized and assessed as novel antibacterial agents. Specifically, acid-treated carbon nanodisks (oxCNDs), as a safe alternative material to graphene oxide, interacted through covalent and non-covalent bonding with guanidinylated hyperbranched polyethyleneimine derivatives (GPEI5K and GPEI25K), affording the oxCNDs@GPEI5K and oxCNDs@GPEI25K hybrids. Their physico-chemical characterization confirmed the successful and homogenous attachment of GPEIs on the surface of oxCNDs, which, due to the presence of guanidinium groups, offered them improved aqueous stability. Moreover, the antibacterial activity of oxCNDs@GPEIs was evaluated against Gram-negative E. coli and Gram-positive S. aureus bacteria. It was found that both hybrids exhibited enhanced antibacterial activity, with oxCNDs@GPEI5K being more active than oxCNDs@GPEI25K. Their MIC and MBC values were found to be much lower than those of oxCNDs, revealing that the GPEI attachment endowed the hybrids with enhanced antibacterial properties. These improved properties were attributed to the polycationic character of the oxCNDs@GPEIs, which enables effective interaction with the bacterial cytoplasmic membrane and cell walls, leading to cell envelope damage, and eventually cell lysis. Finally, oxCNDs@GPEIs showed minimal cytotoxicity on mammalian cells, indicating that these hybrid nanomaterials have great potential to be used as safe and efficient antibacterial agents.

Graphene oxide and oxidized carbon nanodiscs as biomedical scaffolds for the targeted delivery of quercetin to cancer cells.

Targeting cancer cells without affecting normal cells poses a particular challenge. Nevertheless, the utilization of innovative nanomaterials in targeted cancer therapy has witnessed significant growth in recent years. In this study, we examined two layered carbon nanomaterials, graphene and carbon nanodiscs (CNDs), both of which possess extraordinary physicochemical and structural properties alongside their nano-scale dimensions, and explored their potential as nanocarriers for quercetin, a bioactive flavonoid known for its potent anticancer properties. Within both graphitic allotropes, oxidation results in heightened hydrophilicity and the incorporation of oxygen functionalities. These factors are of great significance for drug delivery purposes. The successful oxidation and interaction of quercetin with both graphene (GO) and CNDs (oxCNDs) have been confirmed through a range of characterization techniques, including FTIR, Raman, and XPS spectroscopy, as well as XRD and AFM. In vitro anticancer tests were conducted on both normal (NIH/3T3) and glioblastoma (U87) cells. The results revealed that the bonding of quercetin with GO and oxCNDs enhances its cytotoxic effect on cancer cells. GO-Quercetin and oxCNDs-Quercetin induced G0/G1 cell cycle arrest in U87 cells, whereas oxCNDs caused G2/M arrest, indicating a distinct mode of action. In long-term survival studies, cancer cells exhibited significantly lower viability than normal cells at all corresponding doses of GO-Quercetin and oxCNDs-Quercetin. This work leads us to conclude that the conjugation of quercetin to GO and oxCNDs shows promising potential for targeted anticancer activity. However, further research at the molecular level is necessary to substantiate our preliminary findings.