On the Quality Control for the Determination of Ultratrace-Level 236U and 233U in Environmental Samples by Accelerator Mass Spectrometry.

Our recent attempt to determine ultratrace-level 236U and 233U in small-volume seawater samples was challenged by high and unstable procedure blanks in our environmental radioactivity laboratory, which used to be a spent fuel research facility. Through intercomparison experiments with different laboratories and background checks on the chemical reagents and laboratory dust, the resuspended U-bearing dust was identified as the dominating source of the 236U and 233U contamination. With the implementation of background control (especially dust control) measures, the procedure blanks and detection limits of 236U and 233U for the radiochemical separation procedure have been significantly improved by three orders of magnitudes. With well-controlled blanks, the analytical precision for 236U and 233U predominantly relies on the AMS counting statistics. Background check and dust control are strongly recommended before the analyses of environmental-level long-lived radionuclides (such as 236U and 233U) that are conducted in the former or active nuclear facilities, even if clearance of radioactivity relevant for radioprotection was achieved.

70-Year Anthropogenic Uranium Imprints of Nuclear Activities in Baltic Sea Sediments.

A strongly stratified water structure and a densely populated catchment make the Baltic Sea one of the most polluted seas. Understanding its circulation pattern and time scale is essential to predict the dynamics of hypoxia, eutrophication, and pollutants. Anthropogenic 236U and 233U have been demonstrated as excellent transient tracers in oceanic studies, but unclear input history and inadequate long-term monitoring records limit their application in the Baltic Sea. From two dated Baltic sediment cores, we obtained high-resolution records of anthropogenic uranium imprints originating from three major human nuclear activities throughout the Atomic Era. Using the novel 233U/236U signature, we distinguished and quantified 236U inputs from global fallout (45.4-52.1%), Chernobyl accident (0.3-1.8%), and discharges from civil nuclear industries (46.1-54.3%) to the Baltic Sea. We estimated the total release of 233U (7-15 kg) from the atmospheric nuclear weapon testing and pinpointed the 233U peak signal in the mid-to-late 1950s as a potential time marker for the onset of the Anthropocene Epoch. This work also provides fundamental 236U data on Chernobyl accident and early discharges from civil nuclear facilities, prompting worldwide 233U-236U tracer studies. We anticipate our data to be used in a broader application in model-observation interdisciplinary research on water circulation and pollutant dynamics in the Baltic Sea.

Pushing Limits of ICP-MS/MS for the Determination of Ultralow 236U/238U Isotope Ratios.

Determination of uranium isotope ratios is of great expedience for assessing its origin in environmental samples. In particular, the 236U/238U isotope ratio provides a powerful tool to discriminate between the different sources of uranium (uranium ore, geochemical background, and uranium from anthropogenic activities). However, in the environment, this ratio is typically below 10-8. This low abundance of 236U and the presence in large excess of major isotopes (mainly 238U and 235U) complicates the accurate detection of 236U signal by mass spectrometry and thus highly sensitive analytical instruments providing high abundance sensitivity are required. This work pushes the limits of triple quadrupole-based ICP-MS technology for accurate detection of 236U/238U isotope ratios down to 10-10, which is so far mainly achievable by AMS. Coupled with an efficient desolvating module, N2O was used as the reaction gas in the collision reaction cell of the ICP-MS/MS. This configuration allows a significant decrease of the uranium polyatomic interferences (235UH+ ions) and an accurate determination of low 236U/238U isotope ratios. This new methodology was successfully validated through measurements of certified reference material from 10-7 to 10-9 and then through comparisons with AMS measurement results for ratios down to 10-10. This is the first time that 236U/238U isotope ratios as low as 10-10 were determined by ICP-MS/MS. The possibility of measuring low 236U/238U isotope ratios can offer a large variety of geochemical applications in particular for the determination of uranium sources in the environment.

Limits on Supernova-Associated

We searched for the presence of ^{26}Al in deep-sea sediments as a signature of supernova influx. Our data show an exponential dependence of ^{26}Al with the sample age that is fully compatible with radioactive decay of terrigenic ^{26}Al. The same set of samples demonstrated a clear supernova ^{60}Fe signal between 1.7 and 3.2 Myr ago. Combining our ^{26}Al data with the recently reported ^{60}Fe data results in a lower limit of 0.18_{-0.08}^{+0.15} for the local interstellar ^{60}Fe/^{26}Al isotope ratio. It compares to most of the ratios deduced from nucleosynthesis models and is within the range of the observed average galactic ^{60}Fe/^{26}Al flux ratio of (0.15±0.05).

Multiactinide Analysis with Accelerator Mass Spectrometry for Ultratrace Determination in Small Samples: Application to an in Situ Radionuclide Tracer Test within the Colloid Formation and Migration Experiment at the Grimsel Test Site (Switzerland).

The multiactinide analysis with accelerator mass spectrometry (AMS) was applied to samples collected from the run 13-05 of the Colloid Formation and Migration (CFM) experiment at the Grimsel Test Site (GTS). In this in situ radionuclide tracer test, the environmental behavior of 233U, 237Np, 242Pu, and 243Am was investigated in a water conductive shear zone under conditions relevant for a nuclear waste repository in crystalline rock. The concentration of the actinides in the GTS groundwater was determined with AMS over 6 orders of magnitude from ∼15 pg/g down to ∼25 ag/g. Levels above 10 fg/g were investigated with both sector field inductively coupled plasma mass spectrometry (SF-ICPMS) and AMS. Agreement within a relative uncertainty of 50% was found for 237Np, 242Pu, and 243Am concentrations determined with the two analytical methods. With the extreme sensitivity of AMS, the long-term release and retention of the actinides was investigated over 8 months in the tailing of the breakthrough curve of run 13-05 as well as in samples collected up to 22 months after. Furthermore, the evidence of masses 241 and 244 u in the CFM samples most probably representing 241Am and 244Pu employed in a previous tracer test demonstrated the analytical capability of AMS for in situ studies lasting more than a decade.

Anthropogenic 236U in Danish Seawater: Global Fallout versus Reprocessing Discharge.

This work focuses on the occurrence of 236U in seawater along Danish coasts, which is the sole water-exchange region between the North Sea-Atlantic Ocean and the Baltic Sea. Seawater collected in 2013 and 2014 were analyzed for 236U (as well as 238U and 137Cs). Our results indicate that 236U concentrations in Danish seawater are distributed within a relatively narrow range of (3.6-8.2) × 107 atom/L and, to a certain extent, independent of salinity. 236U/238U atomic ratios in Danish seawater are more than 4 times higher than the estimated global fallout value of 1× 10-9. The levels of 236U/238U atomic ratios obtained are comparable to those reported for the open North Sea and much higher than several other open oceans worldwide. This indicates that besides the global fallout input, the discharges from the two major European nuclear reprocessing plants are dominating sources of 236U in Danish seawater. However, unexpectedly high 236U/238U ratios as well as high 236U concentrations were observed at low-salinity locations of the Baltic Sea. While this feature might be interpreted as a clue for another significant 236U input in the Baltic Sea, it may also be caused by the complexity of water currents or slow turnover rate.

Plutonium Isotopes (239-241Pu) Dissolved in Pacific Ocean Waters Detected by Accelerator Mass Spectrometry: No Effects of the Fukushima Accident Observed.

The concentration of plutonium (Pu) and the isotopic ratios of 240Pu to 239Pu and 241Pu to 239Pu were determined by accelerator mass spectrometry (AMS) in Pacific Ocean water samples (20 L each) collected in late 2012. The isotopic Pu ratios are important indicators of different contamination sources and were used to identify a possible release of Pu into the ocean by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident. In particular, 241Pu is a well-suited indicator for a recent entry of Pu because 241Pu from fallout of nuclear weapon testings has already significantly decayed. A total of 10 ocean water samples were prepared at the Radiochemie München of the TUM and analyzed at the Vienna Environmental Research Laboratory (VERA). Several samples showed a slightly elevated 240Pu/239Pu ratio of up to 0.22 ± 0.02 compared to global fallout (240Pu/239Pu = 0.180 ± 0.007), whereas all measured 241Pu-to-239Pu ratios were consistent with nuclear weapon fallout (241Pu/239Pu < 2.4 × 10-3), which means that no impact from the Fukushima accident was detected. From the average 241Pu-to-239Pu ratio of 8-2+3 ×10-4 at a sampling station located at a distance of 39.6 km to FDNPP, the 1-σ upper limit for the FDNPP contribution to the 239Pu inventory in the water column was estimated to be 0.2%. Pu, with the signature of weapon-grade Pu was found in a single sample collected around 770 km off the west coast of the United States.

Dynamics of human adipose lipid turnover in health and metabolic disease.

Adipose tissue mass is determined by the storage and removal of triglycerides in adipocytes. Little is known, however, about adipose lipid turnover in humans in health and pathology. To study this in vivo, here we determined lipid age by measuring (14)C derived from above ground nuclear bomb tests in adipocyte lipids. We report that during the average ten-year lifespan of human adipocytes, triglycerides are renewed six times. Lipid age is independent of adipocyte size, is very stable across a wide range of adult ages and does not differ between genders. Adipocyte lipid turnover, however, is strongly related to conditions with disturbed lipid metabolism. In obesity, triglyceride removal rate (lipolysis followed by oxidation) is decreased and the amount of triglycerides stored each year is increased. In contrast, both lipid removal and storage rates are decreased in non-obese patients diagnosed with the most common hereditary form of dyslipidaemia, familial combined hyperlipidaemia. Lipid removal rate is positively correlated with the capacity of adipocytes to break down triglycerides, as assessed through lipolysis, and is inversely related to insulin resistance. Our data support a mechanism in which adipocyte lipid storage and removal have different roles in health and pathology. High storage but low triglyceride removal promotes fat tissue accumulation and obesity. Reduction of both triglyceride storage and removal decreases lipid shunting through adipose tissue and thus promotes dyslipidaemia. We identify adipocyte lipid turnover as a novel target for prevention and treatment of metabolic disease.

Method for (236)U Determination in Seawater Using Flow Injection Extraction Chromatography and Accelerator Mass Spectrometry.

An automated analytical method implemented in a flow injection (FI) system was developed for rapid determination of (236)U in 10 L seawater samples. (238)U was used as a chemical yield tracer for the whole procedure, in which extraction chromatography (UTEVA) was exploited to purify uranium, after an effective iron hydroxide coprecipitation. Accelerator mass spectrometry (AMS) was applied for quantifying the (236)U/(238)U ratio, and inductively coupled plasma mass spectrometry (ICPMS) was used to determine the absolute concentration of (238)U; thus, the concentration of (236)U can be calculated. The key experimental parameters affecting the analytical effectiveness were investigated and optimized in order to achieve high chemical yields and simple and rapid analysis as well as low procedure background. Besides, the operational conditions for the target preparation prior to the AMS measurement were optimized, on the basis of studying the coprecipitation behavior of uranium with iron hydroxide. The analytical results indicate that the developed method is simple and robust, providing satisfactory chemical yields (80-100%) and high analysis speed (4 h/sample), which could be an appealing alternative to conventional manual methods for (236)U determination in its tracer application.

Accelerator Mass Spectrometry of Actinides in Ground- and Seawater: An Innovative Method Allowing for the Simultaneous Analysis of U, Np, Pu, Am, and Cm Isotopes below ppq Levels.

(236)U, (237)Np, and Pu isotopes and (243)Am were determined in ground- and seawater samples at levels below ppq (fg/g) with a maximum sample size of 250 g. Such high sensitivity was possible by using accelerator mass spectrometry (AMS) at the Vienna Environmental Research Accelerator (VERA) with extreme selectivity and recently improved efficiency and a significantly simplified separation chemistry. The use of nonisotopic tracers was investigated in order to allow for the determination of (237)Np and (243)Am, for which isotopic tracers either are rarely available or suffer from various isobaric mass interferences. In the present study, actinides were concentrated from the sample matrix via iron hydroxide coprecipitation and measured sequentially without previous chemical separation from each other. The analytical method was validated by the analysis of the Reference Material IAEA 443 and was applied to groundwater samples from the Colloid Formation and Migration (CFM) project at the deep underground rock laboratory of the Grimsel Test Site (GTS) and to natural water samples affected solely by global fallout. While the precision of the presented analytical method is somewhat limited by the use of nonisotopic spikes, the sensitivity allows for the determination of ∼10(5) atoms in a sample. This provides, e.g., the capability to study the long-term release and retention of actinide tracers in field experiments as well as the transport of actinides in a variety of environmental systems by tracing contamination from global fallout.

Uranium from German Nuclear Power Projects of the 1940s--A Nuclear Forensic Investigation.

Here we present a nuclear forensic study of uranium from German nuclear projects which used different geometries of metallic uranium fuel. Through measurement of the (230)Th/(234)U ratio, we could determine that the material had been produced in the period from 1940 to 1943. To determine the geographical origin of the uranium, the rare-earth-element content and the (87)Sr/(86)Sr ratio were measured. The results provide evidence that the uranium was mined in the Czech Republic. Trace amounts of (236)U and (239)Pu were detected at the level of their natural abundance, which indicates that the uranium fuel was not exposed to any major neutron fluence.

Airborne Plutonium and non-natural Uranium from the Fukushima DNPP found at 120 km distance a few days after reactor hydrogen explosions.

Plutonium (Pu) and non-natural uranium (U) originating from the Fukushima Daiichi Nuclear Power Plant (FDNPP) were identified in the atmosphere at 120 km distance from the FDNPP analyzing the ratio of number of atoms, following written as n(isotope)/n(isotope), of Pu and U. The n((240)Pu)/n((239)Pu), n((241)Pu)/n((239)Pu), n((234)U)/n((238)U), n((235)U)/n((238)U) and n((236)U)/n((238)U) in aerosol samples collected before and after the FDNPP incident were analyzed by accelerator mass spectrometry (AMS) and inductively coupled plasma mass spectrometry (ICPMS). The activity concentrations of (137)Cs and (134)Cs in the same samples were also analyzed by gamma spectrometry before the destructive analysis. Comparing the time series of analytical data on Pu and U obtained in this study with previously reported data on Pu, U, and radioactive Cs, we concluded that Pu and non-natural U from the FDNPP were transported in the atmosphere directly over a 120 km distance by aerosol and wind within a few days after the reactor hydrogen explosions. Effective dose of Pu were calculated using the data of Pu: (130 ± 21) nBq/m(3), obtained in this study. We found that the airborne Pu contributes only negligibly to the total dose at the time of the incident. However the analytical results show that the amount of Pu and non-natural U certainly increased in the environment after the incident.

Isotopic compositions of (236)U and Pu isotopes in "black substances" collected from roadsides in Fukushima prefecture: fallout from the Fukushima Dai-ichi nuclear power plant accident.

Black-colored road dusts were collected in high-radiation areas in Fukushima Prefecture. Measurement of (236)U and Pu isotopes and (134,137)Cs in samples was performed to confirm whether refractory elements, such as U and Pu, from the fuel core were discharged and to ascertain the extent of fractionation between volatile and refractory elements. The concentrations of (134,137)Cs in all samples were exceptionally high, ranging from 0.43 to 17.7 MBq/kg, respectively. (239+240)Pu was detected at low levels, ranging from 0.15 to 1.14 Bq/kg, and with high (238)Pu/(239+240)Pu activity ratios of 1.64-2.64. (236)U was successfully determined in the range of (0.28 to 6.74) × 10(-4) Bq/kg. The observed activity ratios for (236)U/(239+240)Pu were in reasonable agreement with those calculated for the fuel core inventories, indicating that trace amounts of U from the fuel cores were released together with Pu isotopes but without large fractionation. The quantities of U and (239+240)Pu emitted to the atmosphere were estimated as 3.9 × 10(6) Bq (150 g) and 2.3 × 10(9) Bq (580 mg), respectively. With regard to U, this is the first report to give a quantitative estimation of the amount discharged. Appreciable fractionation between volatile and refractory radionuclides associated with the dispersal/deposition processes with distance from the Fukushima Dai-ichi Nuclear Power Plant was found.

Sequential injection method for rapid and simultaneous determination of 236U, 237Np, and Pu isotopes in seawater.

An automated analytical method implemented in a novel dual-column tandem sequential injection (SI) system was developed for simultaneous determination of (236)U, (237)Np, (239)Pu, and (240)Pu in seawater samples. A combination of TEVA and UTEVA extraction chromatography was exploited to separate and purify target analytes, whereupon plutonium and neptunium were simultaneously isolated and purified on TEVA, while uranium was collected on UTEVA. The separation behavior of U, Np, and Pu on TEVA-UTEVA columns was investigated in detail in order to achieve high chemical yields and complete purification for the radionuclides of interest. (242)Pu was used as a chemical yield tracer for both plutonium and neptunium. (238)U was quantified in the sample before the separation for deducing the (236)U concentration from the measured (236)U/(238)U atomic ratio in the separated uranium target using accelerator mass spectrometry. Plutonium isotopes and (237)Np were measured using inductively coupled plasma mass spectrometry after separation. The analytical results indicate that the developed method is robust and efficient, providing satisfactory chemical yields (70-100%) of target analytes and relatively short analytical time (8 h/sample).

Measurements of ²³6U in ancient and modern peat samples and implications for postdepositional migration of fallout radionuclides.

(236)U was analyzed in an ombrotrophic peat core representing the last 80 years of atmospheric deposition and a minerotrophic peat sample from the last interglacial period. The determination of (236)U at levels of 10(7) atoms/g was possible by using ultraclean laboratory procedures and accelerator mass spectrometry. The vertical profile of the (236)U/(238)U isotopic ratio along the ombrotrophic peat core represents the first observation of the (236)U bomb peak in a terrestrial environment. A constant level of anthropogenic (236)U with an average (236)U/(238)U isotopic ratio of (1.24 ± 0.08) × 10(-6) in the top layers of the core was observed. Comparing the abundances of the global fallout derived (236)U and (239)Pu along the peat core, the post depositional migration of plutonium clearly exceeds that of uranium. However, the cumulative (236)U/(239)Pu ratio of 0.62 ± 0.31 is in agreement with previous studies on the global fallout uranium and plutonium. In the interglacial peat samples a (236)U/(238)U isotopic ratio of (3.3 ± 0.7) × 10(-12) was detected; although this measurement is an upper limit, it constitutes a significant step forward in the experimental determination of the natural (236)U abundance and represents a true background sample for the ombrotrophic peat core.

Iodine-129 in seawater offshore Fukushima: distribution, inorganic speciation, sources, and budget.

The Fukushima nuclear accident in March 2011 has released a large amount of radioactive pollutants to the environment. Of the pollutants, iodine-129 is a long-lived radionuclide and will remain in the environment for millions of years. This work first report levels and inorganic speciation of (129)I in seawater depth profiles collected offshore Fukushima in June 2011. Significantly elevated (129)I concentrations in surface water were observed with the highest (129)I/(127)I atomic ratio of 2.2 × 10(-9) in the surface seawater 40 km offshore Fukushima. Iodide was found as the dominant species of (129)I, while stable (127)I was mainly in iodate form, reflecting the fact that the major source of (129)I is the direct liquid discharges from the Fukushima NPP. The amount of (129)I directly discharged from the Fukushima Dai-ichi nuclear power plant to the sea was estimated to be 2.35 GBq, and about 1.09 GBq of (129)I released to the atmosphere from the accident was deposited in the sea offshore Fukushima. A total release of 8.06 GBq (or 1.2 kg) of (129)I from the Fukushima accident was estimated. These Fukushima-derived (129)I data provide necessary information for the investigation of water circulation and geochemical cycle of iodine in the northwestern Pacific Ocean in the future.

Reconstructing the chronology of the natural and anthropogenic uranium isotopic signals in a marine sediment core from Beppu Bay, Japan.

The long-lived U isotopes, 233U and 236U, have been used increasingly in recent years as marine circulation tracers and for identifying sources of uranium contamination in the environment. The sedimentation histories of these two U isotopes in combination with natural 238U were reconstructed for an anoxic sediment core collected from Beppu Bay, Japan, in the western North Pacific Ocean showing good time resolution (less than 2.6 y/sample). The 233U/236U atom ratio showed a prominent peak of (3.20 ± 0.30) × 10-2 around 1957 which can be attributed to the input from atmospheric nuclear weapons tests including thermonuclear tests conducting in the Equatorial Pacific. The integrated 233U/236U ratio of (1.64 ± 0.08) × 10-2 for the sediment was found to be in relatively good agreement with the representative ratio published for global fallout (∼1.4 × 10-2). A prominent increase in the authigenic ratio of 233U/238Ua,s in the leached fraction (1.39 ± 0.11 × 10-11) and the bulk digestion (1.36 ± 0.10 × 10-11) was also observed around 1957. This reflects the input supply of 233U to the seawater which is known to have a relatively constant 238U content. The authigenic 236U/238Ua,s ratio (0.18 ± 0.02 × 10-9) obtained for 1921 increased from the early 1950's to a maximum of (6.59 ± 0.60) × 10-9 around 1962. The variation in this ratio represents well the introduction history of U into the surface environment without site-specific U contamination and the time profile is also consistent with the 137Cs signature. This work thus provides a benchmark for the long-term use of the isotopic U composition as an input parameter for seawater circulation tracers and as a chronological marker for anoxic sediments and sedimentary rocks. Especially the 233U/236U ratio may serve as a key-marker for the new geological age Anthropocene.

Iodine isotopes (127I and 129I) in aerosols at high altitude Alp stations.

Concentrations of gases and particulate matter have been proven to be affected by meteorological and geographical variables from urban locations to high mountain clean air sites. Following our previous research in Vienna, we summarize here new findings about concentration levels of iodine isotopes in aerosols collected at two Alpine meteorological stations, Sonnblick (Austria) and Zugspitze (Germany) during 2001. The present study mainly focuses on the effect of altitude on the anthropogenic concentration of (129)I and on the isotopic ratio (129)I/(127)I. Iodine was separated from matrix elements by using either an anion exchange method or solvent extraction, and was analyzed by ICP-MS and AMS. Over the altitude change from Vienna to Zugspitze and Sonnblick (202 m to 2962 m and 3106 m above sea level), stable iodine level decreased from an average of 0.94 ng m(-3) to 0.52 ng m(-3) and 0.62 ng m(-3), respectively. Similarly, (129)I concentrations at both Alpine stations were about 1 order of magnitude lower (10(4) atoms m(-3)) than values obtained for Vienna (10(5) atoms m(-3)) and reveal a strong vertical concentration gradient of (129)I. A high degree of variability is observed, which is due to wide variation in the origin of air masses. Furthermore, air trajectory analysis demonstrates the importance of large scale air transport mostly from southeast Europe for influencing Sonnblick whereas influence from northwest Europe is strong at Zugspitze. In contrast to (129)I, a higher concentration of (7)Be was found at higher altitude stations compared to Vienna which probably results from its production in the upper atmosphere.

Light induced suppression of sulfur in a cesium sputter ion source.

New techniques for suppression of atomic isobars in negative ion beams are of great interest for accelerator mass spectrometry (AMS). Especially small and medium-sized facilities can significantly extend their measurement capabilities to new interesting isotopes with a technique independent of terminal voltage. In a new approach, the effect of continuous wave laser light directed towards the cathode surface in a cesium sputter ion source of the Middleton type was studied. The laser light induced a significant change in oxygen, sulfur and chlorine negative ion production from a AgCl target. Approximately 100 mW of laser light reduced the sulfur to chlorine ratio by one order of magnitude. The effect was found to depend on laser power and ion source parameters but not on the laser wavelength. The time constant of the effect varied from a few seconds up to several minutes. Experiments were first performed at the ion beam facility GUNILLA at University of Gothenburg with macroscopic amounts of sulfur. The results were then reproduced at the VERA AMS facility with chemically cleaned AgCl targets containing ∼1 ppm sulfur. The physical explanation behind the effect is still unclear. Nevertheless, the technique has been successfully applied during a regular AMS measurement of 36Cl.

Understanding source terms of anthropogenic uranium in the Arctic Ocean - First 236U and 233U dataset in Barents Sea sediments.

This work reports the first dataset of 236U and 233U in sediment cores taken from the Barents Sea, with the aim to better understand the source terms of anthropogenic uranium in the Arctic region. Concentrations of 236U and 233U along with 137Cs, and 233U/236U atomic ratio were measured in six sediment profiles. The cumulative areal inventories of 236U and 233U obtained in this work are (3.50-12.7) × 1011 atom/m2 and (4.92-21.2) × 109 atom/m2, with averages values of (8.08 ± 2.93) × 1011 atom/m2 and (1.08 ± 0.56) × 1010 atom/m2, respectively. The total quantities of 236U and 233U deposited in the Barents Sea bottom sediments were estimated to be 507 ± 184 g and 7 ± 3 g, respectively, which are negligible compared to the total direct deposition of 236U (6000 g) and 233U (40-90 g) from global fallout in the Barents Sea. The integrated atomic ratios of 233U/236U ranging in (0.98-1.57) × 10-2 reflect the predominant global fallout signal of 236U in the Barents Sea sediments and the highest reactor-236U contribution accounts for 30 ± 14 % among the six sediment cores. The reactor-236U input in the Barents Sea sediments is most likely transported from the European reprocessing plants rather than related to any local radioactive contamination. These results provide better understanding on the source term of anthropogenic 236U in the Barents Sea, prompt the oceanic tracer application of 236U for studying the dynamics of the Atlantic-Arctic Ocean and associated climate changes. The 236U-233U benchmarked age-depth profiles seem to match reasonably well with the reported input function history of radioactive contamination in the Barents Sea, indicating the high potential of anthropogenic 236U-233U pair as a useful tool for sediment dating.