RESUMO
Rectal cancer occupies the leading position among cancers, and incidence of locally advanced recurrences is still high despite comprehensive treatment. Combined resections are usually associated with high perioperative risks. These procedures are technically complex interventions requiring further improvement. Virtual reality technology in surgical treatment of locally advanced rectal cancer recurrence has not been widely discussed. The authors present multidisciplinary construction of the matched topographic-anatomical virtual model and virtual planning of the combined surgical intervention. Intraoperative use of augmented reality allowed specifying topographic and anatomical features of surgical area, level of vascular ligation, localization of tumor fixation points and resection borders. These data ensured safety and quality of resection. Further research of augmented reality technology and improvement of its technical aspects will improve the results of surgical treatment of patients with locally advanced pelvic tumors and recurrences.
Assuntos
Realidade Aumentada , Neoplasias Retais , Humanos , Recidiva Local de Neoplasia/cirurgia , Recidiva Local de Neoplasia/patologia , Neoplasias Retais/cirurgia , Neoplasias Retais/patologia , Reto/cirurgiaRESUMO
This article describes the use of augmented reality technology for the removal of an odontogenic cyst of the upper jaw. By combining the image of computed tomography, anatomical formations and the tip of the endoscope in mixed reality, a navigation system was created for performing cystectomy and resection of the tip of the molar root for a volumetric cyst of the maxillary sinus. For the first time, a system for tracking the position of an endoscope in mixed reality in real time was used.
Assuntos
Realidade Aumentada , Cistos , Humanos , Endoscopia/métodos , Tomografia Computadorizada por Raios X , Cistos/diagnóstico por imagem , Cistos/cirurgia , TecnologiaRESUMO
Gram-negative bacteria can produce specific proteinaceous inhibitors to defend themselves against the lytic action of host lysozymes. So far, four different lysozyme inhibitor families have been identified. Here, we report the crystal structure of the Escherichia coli periplasmic lysozyme inhibitor of g-type lysozyme (PliG-Ec) in complex with Atlantic salmon g-type lysozyme (SalG) at a resolution of 0.95 Å, which is exceptionally high for a complex of two proteins. The structure reveals for the first time the mechanism of g-type lysozyme inhibition by the PliG family. The latter contains two specific conserved regions that are essential for its inhibitory activity. The inhibitory complex formation is based on a double 'key-lock' mechanism. The first key-lock element is formed by the insertion of two conserved PliG regions into the active site of the lysozyme. The second element is defined by a distinct pocket of PliG accommodating a lysozyme loop. Computational analysis indicates that this pocket represents a suitable site for small molecule binding, which opens an avenue for the development of novel antibacterial agents that suppress the inhibitory activity of PliG.
Assuntos
Proteínas de Escherichia coli/química , Escherichia coli/química , Imunidade Inata/imunologia , Modelos Moleculares , Muramidase/química , Conformação Proteica , Animais , Cristalografia , Escherichia coli/imunologia , Proteínas de Escherichia coli/metabolismo , Muramidase/metabolismo , Salmo salarRESUMO
Cytoskeletal intermediate filaments (IFs) assemble from the elementary dimers based on a segmented α-helical coiled-coil (CC) structure. Crystallographic studies of IF protein fragments remain the main route to access their atomic structure. To enable crystallization, such fragments must be sufficiently short. As a consequence, they often fail to assemble into the correct CC dimers. In particular, human vimentin fragment D3 corresponding to the first half of coil2 (residues 261-335) stays monomeric in solution. We have induced its dimerization via introducing a disulfide link between two cysteines engineered in the hydrophobic core of the CC close to its N-terminus. The 2.3 Å crystal structure of the D3st (stabilized) fragment reveals a mostly parallel α-helical bundle structure in its N-terminal half which smoothly continues into a left-handed CC towards the C-terminus. This provides a direct evidence for a continuously α-helical structure of the coil2 segment and disproves the previously suggested existence of linker L2 separating it into two left-handed CCs. The general principles of CC dimer stabilization by disulfide introduction are also discussed.
Assuntos
Dissulfetos/química , Vimentina/metabolismo , Vimentina/ultraestrutura , Sequência de Aminoácidos , Cristalização , Cristalografia por Raios X , Dissulfetos/análise , Humanos , Modelos Moleculares , Dados de Sequência Molecular , Multimerização Proteica , Estrutura Secundária de Proteína , Estrutura Terciária de Proteína , Vimentina/análiseRESUMO
Here we report the crystal structure of a stablilized plasminogen activator inhibitor-1 variant (PAI-1-N150H-K154T-Q301P-Q319L-M354I (PAI-1-stab)) that shows a cleavage within the reactive centre loop. The new structure is of superior quality compared to the previously determined structure of the cleaved PAI-1-A335P mutant. We present a detailed comparison of the two structures and also compare them with the structure of the active PAI-1-stab. The structural data give important insights into the working mechanism of PAI-1 and also explain the role of various stabilizing mutations.
Assuntos
Inibidor 1 de Ativador de Plasminogênio/genética , Inibidor 1 de Ativador de Plasminogênio/fisiologia , Domínio Catalítico , Cristalografia por Raios X , Humanos , Modelos Moleculares , Conformação Molecular , Estrutura Molecular , Mutação , Ligação Proteica , Conformação Proteica , Estrutura Terciária de Proteína , Serpinas/químicaRESUMO
The alpha-helical coiled coil is one of the principal subunit oligomerization motifs in proteins. Its most characteristic feature is a heptad repeat pattern of primarily apolar residues that constitute the oligomer interface. Despite its simplicity, it is a highly versatile folding motif: coiled-coil-containing proteins exhibit a broad range of different functions related to the specific 'design' of their coiled-coil domains. The architecture of a particular coiled-coil domain determines its oligomerization state, rigidity and ability to function as a molecular recognition system. Much progress has been made towards understanding the factors that determine coiled-coil formation and stability. Here we discuss this highly versatile protein folding and oligomerization motif with regard to its structural architecture and how this is related to its biological functions.
Assuntos
Proteínas do Citoesqueleto/química , Filamentos Intermediários/química , Proteínas de Membrana/química , Dobramento de Proteína , Estrutura Secundária de Proteína , Proteínas de Transporte Vesicular , Proteínas do Citoesqueleto/metabolismo , Concentração de Íons de Hidrogênio , Filamentos Intermediários/metabolismo , Proteínas de Membrana/metabolismo , Estrutura Secundária de Proteína/fisiologia , Receptores Imunológicos/química , Receptores Imunológicos/metabolismo , Receptores Depuradores , Proteínas SNARE , Transcrição Gênica/fisiologiaRESUMO
Small heat-shock proteins (sHsps) are ubiquitous molecular chaperones. sHsps function as homooligomers or heterooligomers that are prone to subunit exchange and structural plasticity. Here, a procedure for obtaining diffraction-quality crystals of the alpha-crystallin domain of human Hsp27 is presented. Initially, limited proteolysis was used to delineate the corresponding stable fragment (residues 90-171). This fragment could be crystallized, but examination of the crystals using X-rays indicated partial disorder. The surface-entropy reduction approach was applied to ameliorate the crystal quality. Consequently, a double mutant E125A/E126A of the 90-171 fragment yielded well ordered crystals that diffracted to 2.0 A resolution.
Assuntos
Proteínas de Choque Térmico HSP27/química , alfa-Cristalinas/química , Sequência de Aminoácidos , Clonagem Molecular , Cristalografia por Raios X , Proteínas de Choque Térmico HSP27/genética , Proteínas de Choque Térmico , Humanos , Chaperonas Moleculares , Dados de Sequência Molecular , Mutagênese , Fragmentos de Peptídeos/química , Fragmentos de Peptídeos/genética , Conformação Proteica , Estrutura Terciária de Proteína , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Homologia de Sequência de Aminoácidos , alfa-Cristalinas/genéticaRESUMO
BACKGROUND: Oligomeric coiled-coil motifs are found in numerous protein structures; among them is fibritin, a structural protein of bacteriophage T4, which belongs to a class of chaperones that catalyze a specific phage-assembly process. Fibritin promotes the assembly of the long tail fibers and their subsequent attachment to the tail baseplate; it is also a sensing device that controls the retraction of the long tail fibers in adverse environments and, thus, prevents infection. The structure of fibritin had been predicted from sequence and biochemical analyses to be mainly a triple-helical coiled coil. The determination of its structure at atomic resolution was expected to give insights into the assembly process and biological function of fibritin, and the properties of modified coiled-coil structures in general. RESULTS: The three-dimensional structure of fibritin E, a deletion mutant of wild-type fibritin, was determined to 2.2 A resolution by X-ray crystallography. Three identical subunits of 119 amino acid residues form a trimeric parallel coiled-coil domain and a small globular C-terminal domain about a crystallographic threefold axis. The coiled-coil domain is divided into three segments that are separated by insertion loops. The C-terminal domain, which consists of 30 residues from each subunit, contains a beta-propeller-like structure with a hydrophobic interior. CONCLUSIONS: The residues within the C-terminal domain make extensive hydrophobic and some polar intersubunit interactions. This is consistent with the C-terminal domain being important for the correct assembly of fibritin, as shown earlier by mutational studies. Tight interactions between the C-terminal residues of adjacent subunits counteract the latent instability that is suggested by the structural properties of the coiled-coil segments. Trimerization is likely to begin with the formation of the C-terminal domain which subsequently initiates the assembly of the coiled coil. The interplay between the stabilizing effect of the C-terminal domain and the labile coiled-coil domain may be essential for the fibritin function and for the correct functioning of many other alpha-fibrous proteins.
Assuntos
Proteínas Virais/química , Proteínas Virais/metabolismo , Sequência de Aminoácidos , Bacteriófago T4/metabolismo , Sítios de Ligação , Cristalografia por Raios X , Dimerização , Modelos Moleculares , Dados de Sequência Molecular , Mutação , Conformação Proteica , Dobramento de Proteína , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Proteínas Virais/genéticaRESUMO
BACKGROUND: The T4 bacteriophage consists of a head, filled with double-stranded DNA, and a complex contractile tail required for the ejection of the viral genome into the Escherichia coli host. The tail has a baseplate to whïch are attached six long and six short tail fibers. These fibers are the sensing devices for recognizing the host. When activated by attachment to cell receptors, the fibers cause a conformational transition in the baseplate and subsequently in the tail sheath, which initiates DNA ejection. The baseplate is a multisubunit complex of proteins encoded by 15 genes. Gene product 9 (gp9) is the protein that connects the long tail fibers to the baseplate and triggers the tail contraction after virus attachment to a host cell. RESULTS: The crystal structure of recombinant gp9, determined to 2.3 A resolution, shows that the protein of 288 amino acid residues assembles as a homotrimer. The monomer consists of three domains: the N-terminal domain generates a triple coiled coil; the middle domain is a mixed, seven-stranded beta sandwich with a topology not previously observed; and the C-terminal domain is an eight-stranded, antiparallel beta sandwich having some resemblance to 'jelly-roll' viral capsid protein structures. CONCLUSIONS: The biologically active form of gp9 is a trimer. The protein contains flexible interdomain hinges, which are presumably required to facilitate signal transmission between the long tail fibers and the baseplate. Structural and genetic analyses show that the C-terminal domain is bound to the baseplate, and the N-terminal coiled-coil domain is associated with the long tail fibers.
Assuntos
Bacteriófago T4/química , Bacteriófago T4/genética , Proteínas Virais/química , Proteínas Virais/genética , Sequência de Aminoácidos , Bacteriófago T4/fisiologia , Cristalografia por Raios X , Escherichia coli/genética , Escherichia coli/virologia , Genes Virais , Ligação de Hidrogênio , Modelos Moleculares , Dados de Sequência Molecular , Conformação Proteica , Estrutura Quaternária de Proteína , Estrutura Terciária de Proteína , Proteínas Virais/fisiologiaRESUMO
UNLABELLED: Essentials Thrombin-activatable fibrinolysis inhibitor (TAFI) is a risk factor for cardiovascular disorders. TAFI inhibitory nanobodies represent a promising step in developing profibrinolytic therapeutics. We have solved three crystal structures of TAFI in complex with inhibitory nanobodies. Nanobodies inhibit TAFI through distinct mechanisms and represent novel profibrinolytic leads. SUMMARY: Background Thrombin-activatable fibrinolysis inhibitor (TAFI) is converted to activated TAFI (TAFIa) by thrombin, plasmin, or the thrombin-thrombomodulin complex (T/TM). TAFIa is antifibrinolytic, and high levels of TAFIa are associated with an increased risk for cardiovascular disorders. TAFI-inhibitory nanobodies represent a promising approach for developing profibrinolytic therapeutics. Objective To elucidate the molecular mechanisms of inhibition of TAFI activation and TAFIa activity by nanobodies with the use of X-ray crystallography and biochemical characterization. Methods and results We selected two nanobodies for cocrystallization with TAFI. VHH-a204 interferes with all TAFI activation modes, whereas VHH-i83 interferes with T/TM-mediated activation and also inhibits TAFIa activity. The 3.05-Å-resolution crystal structure of TAFI-VHH-a204 reveals that the VHH-a204 epitope is localized to the catalytic moiety (CM) in close proximity to the TAFI activation site at Arg92, indicating that VHH-a204 inhibits TAFI activation by steric hindrance. The 2.85-Å-resolution crystal structure of TAFI-VHH-i83 reveals that the VHH-i83 epitope is located close to the presumptive thrombomodulin-binding site in the activation peptide (AP). The structure and supporting biochemical assays suggest that VHH-i83 inhibits TAFIa by bridging the AP to the CM following TAFI activation. In addition, the 3.00-Å-resolution crystal structure of the triple TAFI-VHH-a204-VHH-i83 complex demonstrates that the two nanobodies can simultaneously bind to TAFI. Conclusions This study provides detailed insights into the molecular mechanisms of TAFI inhibition, and reveals a novel mode of TAFIa inhibition. VHH-a204 and VHH-i83 merit further evaluation as potential profibrinolytic therapeutics.
Assuntos
Carboxipeptidase B2/metabolismo , Anticorpos de Domínio Único/química , Sítios de Ligação , Doenças Cardiovasculares/metabolismo , Clonagem Molecular , Cristalografia por Raios X , Epitopos/química , Fibrinolisina/química , Fibrinólise , Células HEK293 , Humanos , Concentração Inibidora 50 , Conformação Molecular , Mutação , Pichia , Proteínas Recombinantes/química , Fatores de Risco , Trombina/química , Trombomodulina/químicaRESUMO
The X-ray structure of Myxococcus xanthus nucleoside diphosphate (NDP) kinase complexed with adenosine 3',5'-cyclic monophosphate (cAMP) has been determined. The structure was solved by difference Fourier analysis. The refined structure has a crystallographic R-factor of 0.17 at 1.9 A resolution. The phosphoryl group and ribose moiety make extensive polar interactions with the protein, whereas the base interacts only with two hydrophobic residues. The comparison with the structure of the enzyme complex with the substrate adenosine diphosphate (ADP) reported earlier shows that cAMP and ADP interact similarly with the enzyme. The base of the cAMP is present in two conformations, syn and anti, with respect to the sugar. The syn conformer is dominant. Based on the effect of cAMP on phosphorylation of the human NDP kinase NM23, it had been proposed that cAMP might interact with NDP kinase in a manner distinct from other nucleotides. However, the structure of the M. xanthus NDP kinase/cAMP complex indicates that the nucleotide is a competitive inhibitor of the enzyme and occupies the usual nucleotide site. Kinetic assays of the NDP kinase activity in the presence of cAMP were done. Their results are consistent with a competitive character of the cAMP inhibition.
Assuntos
AMP Cíclico/química , Núcleosídeo-Difosfato Quinase/química , Difosfato de Adenosina/química , Difosfato de Adenosina/metabolismo , Sítios de Ligação , Ligação Competitiva , Cristalografia por Raios X , AMP Cíclico/metabolismo , AMP Cíclico/farmacologia , Eletroquímica , Humanos , Técnicas In Vitro , Cinética , Modelos Moleculares , Estrutura Molecular , Myxococcus xanthus/enzimologia , Núcleosídeo-Difosfato Quinase/antagonistas & inibidores , Núcleosídeo-Difosfato Quinase/metabolismo , Fosforilação , Conformação ProteicaRESUMO
Intermediate filaments (IFs) represent an essential component of the cytoskeleton in higher eukaryotic cells. The elementary building block of the IF architecture is an elongated dimer with its dominant central part being a parallel double-stranded alpha-helical coiled coil. Filament formation proceeds via a specific multi-step association of the dimers into the unit-length filaments, which subsequently anneal longitudinally and finally radially compact into mature filaments. To tackle the challenge of a crystallographic structure determination, we have produced and characterised 17 overlapping soluble fragments of human IF protein vimentin. For six fragments ranging in length between 39 and 84 amino acid residues, conditions yielding macroscopic crystals could be established and X-ray diffraction data were collected to the highest resolution limit between 1.4 and 3 A. We expect that solving the crystal structures of these and further fragments will eventually allow us to patch together a molecular model for the full-length vimentin dimer. This divide-and-conquer approach will be subsequently extended to determining the crystal structures of a number of complexes formed by appropriate vimentin fragments, and will eventually allow us to establish the three- dimensional architecture of complete filaments at atomic resolution.
Assuntos
Filamentos Intermediários/química , Fragmentos de Peptídeos/química , Vimentina/química , Sequência de Aminoácidos , Dicroísmo Circular , Cristalização , Dimerização , Humanos , Estrutura Terciária de Proteína , Proteínas Recombinantes/química , Software , Solubilidade , Ultracentrifugação , Difração de Raios XRESUMO
The structural protein, gene product 9 (gp9), of bacteriophage T4 controls baseplate expansion at the first steps of virus attachment onto its host bacterial cell with subsequent tail contraction. Gp9, which has an M(r) of 30.8 kDa and contains 287 amino acids, has been purified from a recombinant Escherichia coli strain and crystallized at 25 degrees C using the hanging drop vapor diffusion method at pH 4.0 with ammonium sulfate as precipitant. The crystals of gp9 belong to the space group R32 with hexagonal cell dimensions a = b = 86.5 A and c = 156.2 A and diffract X-rays to at least 2.7 A. There is one molecule per asymmetric unit.
Assuntos
Bacteriófago T4/química , Genes Virais , Proteínas Virais/química , Bacteriófago T4/genética , Cristalização , Cristalografia por Raios X , Proteínas Virais/genéticaRESUMO
Nearly all intermediate filament proteins exhibit a highly conserved amino acid motif (YRKLLEGEE) at the C-terminal end of their central alpha-helical rod domain. We have analyzed its contribution to the various stages of assembly by using truncated forms of Xenopus vimentin and mouse desmin, VimIAT and DesIAT, which terminate exactly before this motif, by comparing them with the wild-type and tailless proteins. It is surprising that in buffers of low ionic strength and high pH where the full-length proteins form tetramers, both VimIAT and DesIAT associated into various high molecular weight complexes. After initiation of assembly, both VimIAT and DesIAT aggregated into unit-length-type filaments, which rapidly longitudinally annealed to yield filaments of around 20 nm in diameter. Mass measurements by scanning transmission electron microscopy revealed that both VimIAT and DesIAT filaments contained considerably more subunits per cross-section than standard intermediate filaments. This indicated that the YRKLLEGEE-motif is crucial for the formation of authentic tetrameric complexes and also for the control of filament width, rather than elongation, during assembly. To determine the structure of the YRKLLEGEE domain, we grew crystals of peptides containing the last 28 amino acid residues of coil 2B, chimerically fused at its amino-terminal end to the 31 amino acid-long leucine zipper domain of the yeast transcription factor GCN4 to facilitate appropriate coiled-coil formation. The atomic structure shows that starting from Tyr400 the two helices gradually separate and that the coiled coil terminates with residue Glu405 while the downstream residues fold away from the coiled-coil axis.
Assuntos
Sequência Consenso , Proteínas de Filamentos Intermediários/química , Proteínas de Filamentos Intermediários/ultraestrutura , Motivos de Aminoácidos , Sequência de Aminoácidos , Animais , Cristalografia por Raios X , Desmina/química , Desmina/metabolismo , Desmina/ultraestrutura , Concentração de Íons de Hidrogênio , Proteínas de Filamentos Intermediários/metabolismo , Camundongos , Microscopia Eletrônica de Transmissão e Varredura , Modelos Moleculares , Dados de Sequência Molecular , Peso Molecular , Concentração Osmolar , Fragmentos de Peptídeos/química , Fragmentos de Peptídeos/metabolismo , Fragmentos de Peptídeos/ultraestrutura , Ligação Proteica , Estrutura Secundária de Proteína , Estrutura Terciária de Proteína , Proteínas Recombinantes de Fusão/química , Proteínas Recombinantes de Fusão/metabolismo , Proteínas Recombinantes de Fusão/ultraestrutura , Alinhamento de Sequência , Ultracentrifugação , Vimentina/química , Vimentina/metabolismo , Vimentina/ultraestrutura , Viscosidade , Xenopus laevisRESUMO
Lysozymes play a key role in the innate immune system of vertebrates and invertebrates by hydrolyzing peptidoglycan, a vital component of the bacterial cell wall. Gram-negative bacteria produce various types of lysozyme inhibitors that allow them to survive the bactericidal action of lysozyme when their outer membrane is permeabilized. So far, three lysozyme inhibitor families have been described: the Ivy (inhibitor of vertebrate lysozyme) family, the MliC/PliC (membrane-associated/periplasmic lysozyme inhibitor of C-type lysozyme) family, and the PliI (periplasmic lysozyme inhibitor of I-type lysozyme) family. Here, we report high-resolution crystal structures of Salmonella typhimurium PliC (PliC-St) and Aeromonas hydrophila PliI (PliI-Ah). The structure of PliI-Ah is the first in the recently discovered PliI family of lysozyme inhibitors, while the structure of PliC-St is the first structure of a periplasmic lysozyme inhibitor from the PliC/MliC family. Using small-angle X-ray scattering, we demonstrate that both PliC-St and PliI-Ah form stable dimers in solution. The functional dimer architecture of PliC-St is very different from that of the recently described MliC from Pseudomonas aeruginosa (MliC-Pa), despite the close resemblance of their monomers. Furthermore, PliI-Ah has distinctly different monomer and dimer folds compared to PliC, MliC, and Ivy proteins. Site-directed mutagenesis suggests that the inhibitory action of PliI-Ah proceeds via an insertion of a loop containing the conserved SGxY motif into the active center of I-type lysozymes. This motif is related to the functional SGxxY motif found in the MliC/PliC family.
Assuntos
Aeromonas hydrophila/metabolismo , Proteínas de Bactérias/química , Interações Hospedeiro-Patógeno , Muramidase/antagonistas & inibidores , Proteínas Periplásmicas/química , Salmonella typhimurium/metabolismo , Sequência de Aminoácidos , Animais , Proteínas de Bactérias/metabolismo , Humanos , Dados de Sequência Molecular , Proteínas Periplásmicas/metabolismo , Conformação Proteica , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
Small heat shock proteins (sHSPs) are a family of evolutionary conserved ATP-independent chaperones. These proteins share a common architecture defined by a signature α-crystallin domain (ACD) flanked by highly variable N- and C-terminal extensions. The ACD, which has an immunoglobulin-like fold, plays an important role in sHSP assembly. This domain mediates dimer formation of individual protomers, which then may assemble into larger oligomers. In vertebrate sHSPs, the dimer interface is formed by the symmetrical antiparallel pairing of two ß-strands (ß7), generating an extended ß-sheet on one face of the ACD dimer. Recent structural studies of isolated ACDs from a number of vertebrate sHSPs suggest a variability in the register of the ß7/ß7 strand interface, which may, in part, give rise to the polydispersity often associated with the full-length proteins. To further analyze the structure of ACD dimers, we have employed a combination of X-ray crystallography and solution small-angle X-ray scattering (SAXS) to study the ACD-containing fragments of human HSPB1 (HSP27) and HSPB6 (HSP20). Unexpectedly, the obtained crystal structure of the HSPB1 fragment does not reveal the typical ß7/ß7 dimers but, rather, hexamers formed by an asymmetric contact between the ß4 and the ß7 strands from adjacent ACDs. Nevertheless, in solution, both ACDs form stable dimers via the symmetric antiparallel interaction of ß7 strands. Using SAXS, we show that it is possible to discriminate between different putative registers of the ß7/ß7 interface, with the results indicating that, under physiological conditions, there is only a single register of the strands for both proteins.
Assuntos
Proteínas de Choque Térmico HSP20/química , Proteínas de Choque Térmico HSP27/química , Sequência de Aminoácidos , Cristalografia por Raios X , Proteínas de Choque Térmico , Humanos , Modelos Moleculares , Chaperonas Moleculares , Dados de Sequência Molecular , Multimerização Proteica , Estrutura Quaternária de Proteína , Espalhamento a Baixo Ângulo , Homologia de Sequência de AminoácidosRESUMO
Fibritin, a 52 kDa product of bacteriophage T4 gene wac, forms 530 A long fibers, named whiskers, that attach to the phage neck and perform a helper function during phage assembly. Fibritin is a homotrimer, with its predominant central domain consisting of 12 consecutive alpha-helical coiled-coil segments linked together by loops. The central domain is flanked by small globular domains at both ends. Fibritin M is a genetically engineered fragment of the wild type and contains 74 amino-acid residues corresponding to the last coiled-coil segment and the complete carboxy-terminal domain. The crystals of fibritin M belong to the rare space group P3 with three crystallographically independent trimers in the unit cell. The structure has been established at 1.85 A resolution by combining molecular and isomorphous replacement techniques. One of the two heavy-atom derivatives used was gaseous xenon. A substantial fraction of residues in each independent trimer is disordered to various extents in proportion to the lack of restraints on the molecules provided by the lattice contacts. Accurate modeling of the solvent present in the crystals was crucial for achieving good agreement with experimental data.
Assuntos
Bacteriófago T4/química , Fragmentos de Peptídeos/química , Conformação Proteica , Proteínas Virais/química , Sequência de Aminoácidos , Substituição de Aminoácidos , Cristalização , Cristalografia por Raios X , Modelos Moleculares , Dados de Sequência Molecular , Estrutura Secundária de Proteína , Proteínas Recombinantes de Fusão/química , Proteínas Virais/genética , Proteínas Virais/isolamento & purificaçãoRESUMO
Fibritin, a 52-kDa product of gene wac of bacteriophage T4, forms fibrous "whiskers" that connect to the phage tail and facilitate the later stages of phage assembly. Preliminary experiments suggest that fibritin is a trimer, and its predominant central part has a parallel alpha-helical coiled-coil structure. To investigate the oligomerization and function of fibritin, we have designed and studied two related deletion mutants, denoted M and E, that consist of its last 75 and 120 amino acids, respectively. Both proteins contain part of the coiled-coil region and the 29 amino acid carboxy-terminal domain essential for the trimerization of fibritin. The proteins are expressed as a soluble product in an Escherichia coli system. We have obtained crystals of fibritins M and E. Complete native X-ray diffraction data sets have been collected to 1.85 and 2.7 A resolution, respectively. The crystals have space group P3 with a=44.3 A, c=91.3 A (fibritin M) and R32 with a=41.2 A, b=358.7 A (fibritin E) in the hexagonal setting. Symmetry and packing considerations show that fibritin is a triple coiled coil.