Combination of Structure Databases, In Silico Fragmentation, and MS/MS Libraries for Untargeted Screening of Non-Volatile Migrants from Recycled High-Density Polyethylene Milk Bottles.

Chemical contamination is one of the major obstacles for mechanical recycling of plastics. In this article, we built and open-sourced an in-house MS/MS library containing more than 500 plastic-related chemicals and developed mspcompiler, an R package, for the compilation of various libraries. We then proposed a workflow to process untargeted screening data acquired by liquid chromatography high-resolution mass spectrometry. These tools were subsequently employed to data originating from recycled high-density polyethylene (rHDPE) obtained from milk bottles. A total of 83 compounds were identified, with 66 easily annotated by making use of our in-house MS/MS libraries and the mspcompiler R package. In silico fragmentation combined with data obtained from gas chromatography-mass spectrometry and lists of chemicals related to plastics were used to identify those remaining unknown. A pseudo-multiple reaction monitoring method was also applied to sensitively target and screen the identified chemicals in the samples. Quantification results demonstrated that a good sorting of postconsumer materials and a better recycling technology may be necessary for food contact applications. Removal or reduction of non-volatile substances, such as octocrylene and 2-ethylhexyl-4-methoxycinnamate, is still challenging but vital for the safe use of rHDPE as food contact materials.

Direct Immersion-Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry and Response Surface Methodology for Nontarget Screening of (Semi-) Volatile Migrants from Food Contact Materials.

Toward a more rigorous inspection of food contact materials, the importance of sample preparation for nontarget screening should be addressed. Direct immersion-solid-phase microextraction coupled to gas chromatography mass spectrometry (DI-SPME-GC-MS) was optimized for nontarget screening of migrants in 3% acetic acid, 10% ethanol, and 95% ethanol food simulants by response surface methodology (RSM) in the present study. Optimum conditions were DVB/CAR/PDMS fiber, no pH adjustment for 10% and 95% ethanol simulant but pH adjustment to 7 for 3% acetic acid simulant, no salt addition, 5 min preincubation, 55 min extraction at 70 °C, and 8 min desorption at 250 °C. In addition, 9.5 times dilution of 95% ethanol samples prior to extraction was required. pH modification of 3% acetic acid samples was found to be critical for the extraction of amines. The proposed methodology was then evaluated by determining the limit of detection (LOD) as well as repeatability of 35 food contact materials-related substances. Except for those amines and diols which have a relatively high LOD, the LODs of the rest of the substances were 0.1-14.1 µg/kg with a precision of 1.9-23.0% in 10% ethanol and were 0.1-20.2 µg/kg with a precision of 2.5-19.6% in 3% acetic acid simulant. The LOD and precision in 95% ethanol simulant were 0.7-163.7 µg/kg and 1.4-26.8%, respectively. The proposed method can be applied for an overall screening of migrants from these three simulants at even trace levels, though attention should be paid to some specific analytes, e.g., diols and amines, which could have a high LOD and toxicity.

Influence of nonylphenol from multilayer plastic films on artificial insemination of sows.

Artificial insemination is common practice in mass livestock farming. Recently, it was shown that chemicals leaching from multilayer plastic bags affect the fertility of boars, although common quality tests did not show any impact on the sperm. It is not clear whether this incidence was a single case or whether it could be a systematic problem. Therefore, we studied six multilayer plastic bags. A total of 49 compounds were found, but most of them were at very low intensity. Nonylphenols in the range of 19-99 µg/g plastic were found. Migration tests using water and 10% ethanol as simulants, to mimic the behavior of semen with the extender, were performed. The most interesting migrants in terms of potential reprotoxicity were identified as nonylphenols. The identification in depth demonstrated the presence of 10 isomers of nonylphenol with a total concentration range between 16 to 58 µg/Kg simulant, among other migrants at lower concentration. The influence of these nonylphenols and their maximum tolerable concentration in direct contact with semen from boars was studied. Motility, viability, mitochondrial activity and acrosomes reacted were significantly affected at 10 mg/Kg of nonylphenols in contact with the sperm, but in vitro penetration rate was significantly decreased with only 2 mg/Kg. Insight into the mode of action is also provided.

Characterization and elimination efficiency of volatile organic compounds in mechanically recycled polyethylene terephthalate at various recycling stages.

The recycling of polyethylene terephthalate (PET) stands as an effective strategy for mitigating plastic pollution and reducing resource waste. The study aimed to investigate the characterization and elimination efficiency of volatile organic compounds (VOCs) present in rPET at various recycling stages using comprehensive two-dimensional gas chromatography-quadrupole-time-of-flight-mass spectrometry coupled with chemometrics. The results revealed that 52, 135, 95, 44, and 33 VOCs, mostly classified into three chemical groups, were tentatively identified in virgin - PET (v-PET), cold water washed - rPET (C-rPET), decontaminated - rPET (D-rPET), melt-extruded - rPET (M-rPET), and solid-state polycondensation - rPET (S-rPET), respectively. Regarding the VOCs with high and median detection frequencies, fatty acyls showed the highest elimination efficiency (100 % and 92 %), followed by organooxygen compounds (81 % and 99 %), others (97 % and 95 %), and benzene and substituted derivatives (82 % and 95 %) in term of HS-SPME. Following the recycling process, there was a general decrease in the concentration of almost all VOCs, as evidenced by the substantial reduction of o-Xylene, hexanoic acid, octanal, and D-limonene from 18.11, 22.43, 30.74, and 7.41 mg/kg to 0, 0, 3.97, and 0 mg/kg, respectively. However, it was noteworthy that the VOCs identified in the samples were not completely extracted, owing to the limitations of HS-SPME. Furthermore, chemometrics analysis indicated significant discrimination among VOCs from vPET, C-rPET, D-rPET, and M-rPET, while indistinct differences were observed between M-rPET and S-rPET. This study contributes to the enhancement of the recycling process and emphasizes the importance of safeguarding consumer health in terms of elimination of VOCs.

Occurrence and prioritization of non-volatile substances in recycled PET flakes produced in China.

Recycled PET (rPET) is gaining popularity for use in the production of new food contact materials (FCMs) under the context of circular economy. However, the limited information on contaminants in rPET from China and concerns about their potential risk are major obstacles to their use in FCM in China. Fifty-five non-volatile compounds were tentatively identified in 126 batches of hot-washed rPET flakes aimed for food packaging applications in China. Although the 55 substances are not necessarily migratable and may not end up in the contacting media, their presence indicates a need for proper management and control across the value chain. For this reason, the 55 substances prioritized on the basis of level of concerns and in-silico genotoxicity profiler. Among them, dimethoxyethyl phthalate, dibutyl phthalate, bis(2-ethylhexyl) phthalate were classified as level V substances, and Michler's ketone and 4-nitrophenol were both categorized as level V substances and had the genotoxic structure alert, while 2,4,5-trimethylaniline was specified with genotoxic structure alert. The above substances have high priority and may pose a potential risk to human health, therefore special attention should be paid to their migration from rPET. Aside from providing valuable information on non-volatile contaminants present in hot-washed rPET flakes coming from China, this article proposed a prioritization workflow that can be of great help to identify priority substances deserving special attention across the value chain.

Characterization, hazard identification, and risk assessment of volatile organic compounds in Poly(butylene adipate-co-terephthalate)-based food contact articles.

The chemical safety of poly (butylene adipate-co-terephthalate) (PBAT) based food contact articles (FCAs) has aroused increasing toxicological concerns in recent years, but the chemical characterization and associated risk assessment still remain inadequate as it fails to elucidate the distribution pattern and discern the potential genotoxic and carcinogenic hazards of the identified substances. Herein, the volatile organic compounds (VOCs) in 50 batches of PBAT-based FCAs of representative categories and 10 batches of PLA and PBAT pellets were characterized, by which 237 VOCs of 10 chemical categories were identified and exhibited characteristic distribution patterns in the chemical spaces derived from their molecular descriptors. Chemical hazards associated with the identified VOCs were discerned by a hazard-driven classification scheme integrating hazard-related knowledge from multiple publicly available sources, and 34 VOCs were found to bear genotoxic or carcinogenic hazards and to feature higher average molecular weight than the other VOCs. Finally, the Risk and hazard quotient (HQ) calculated as the metrics of risk suggested that all identified VOCs posed acceptable risks (Risk<10-4 or HQ < 1), whereas oxolane, butyrolactone, N,N-dimethylacetamide, 2-butoxyethanol, benzyl alcohol, and 1,2,3-trichloropropane posed non-negligible (Risk>10-6) genotoxic or carcinogenic risk and thus should be of prioritized concern to promote the chemical safety of PBAT-based FCAs.

Potential safety concerns of volatile constituents released from coffee-ground-blended single-use biodegradable drinking straws: A chemical space perspective.

Incorporating spent coffee grounds into single-use drinking straws for enhanced biodegradability also raises safety concerns due to increased chemical complexity. Here, volatile organic compounds (VOCs) present in coffee ground straws (CGS), polylactic acid straws (PLAS), and polypropylene straws (PPS) were characterized using headspace - solid-phase microextraction and migration assays, by which 430 and 153 VOCs of 10 chemical categories were identified by gas chromatography - mass spectrometry, respectively. Further, the VOCs were assessed for potential genetic toxicity by quantitative structure-activity relationship profiling and estimated daily intake (EDI) calculation, revealing that the VOCs identified in the CGS generally triggered the most structural alerts of genetic toxicity, and the EDIs of 37.9% of which exceeded the threshold of 0.15 µg person-1 d-1, also outnumbering that of the PLAS and PPS. Finally, 14 VOCs were prioritized due to their definite hazards, and generally higher EDIs or detection frequencies in the CGS. Meanwhile, the probability of producing safer CGS was also illustrated. Moreover, it was uncovered by chemical space that the VOCs with higher risk potentials tended to gather in the region defined by the molecular descriptor related to electronegativity or octanol/water partition coefficient. Our results provided valuable references to improve the chemical safety of the CGS, to promote consumer health, and to advance the sustainable development of food contact materials.

Elucidation of Non-Intentionally Added Substances from Plant Fiber/Plastic Composites by UPLC-QTOF/MS.

Plant fiber/plastic composites (PPCs) have been widely used in food contact materials (FCMs) for many benefits, such as their claimed better environmental footprint compared to conventional plastics. However, their safety is still not fully understood and must be comprehensively evaluated. Non-volatiles extracted from six PPCs with different plant fibers and polymer matrices were characterized by employing ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry in combination with various spectral libraries and manual elucidation, taking into account spectral similarity and characteristic product ions. A total of 115 compounds were tentatively identified, 50 of which were oligomers or their derivatives from the sample with polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT) as the polymer matrix, and some of them were Cramer rules class III substances based on the threshold of toxicological concern (TTC). Seven reaction products between PLA and PBAT monomers, as well as four derivatives of melamine, were elucidated and well detailed for the first time. In addition, bisphenol S was detected in all samples even though its origin remains to be further explored. Isoprothiolane, as an insecticide and fungicide used to control a range of rice pests, was identified in the sample with rice husk as fillers, experimentally confirming the presence of agrochemicals in samples containing plant fibers.

Occurrence of volatile contaminants in recycled poly(ethylene terephthalate) by HS-SPME-GC×GC-QTOF-MS combined with chemometrics for authenticity assessment of geographical recycling regions.

A comparison was performed on various methods detecting the volatile contaminants (VCs) in recycled poly(ethylene terephthalate) (rPET) flakes, the results demonstrated that head-space solid phase micro-extraction combined with comprehensive two-dimensional gas chromatograph-tandem quadrupole-time-of-flight mass spectrometry (HS-SPME-GC×GC-QTOF-MS) was a sensitive, effective, accurate method, and successfully applied to analyze 57 rPET flakes collected from different recycling plants in China. A total of 212 VCs were tentatively identified, and the possible source were associated with plastic, food, and cosmetics. 45 VCs are classified as high-priority compounds with toxicity level IV or V and may pose a risk to human health. Combined chemometrics for further analysis revealed that significant differences among these three geographical recycling regions. 6, 7, and 6 volatile markers were chosen based on VIP values and S-plot among plant1 plant 2 and plant 3, respectively. The markers differed significantly between recycled rPET samples in three geographical recycling regions based on chemometrics analysis. The initial classification rate and cross-validation accuracy were 100% on the identified VCs. These significant differences demonstrate that a systematic study is needed to obtain a comprehensive data on the contamination of rPET for food contact applications in China.

Analysis of volatile organic compounds and potential odour compounds in food contact paperboard using headspace two-dimensional GC-QTOF-MS.

The objective was to establish a robust and reliable approach for the characterisation of volatile organic compounds (VOCs) present in food contact paperboard. This was achieved through the utilisation of headspace solid-phase microextraction in tandem with comprehensive two-dimensional (2D) gas chromatography (GC) and quadrupole time-of-flight mass spectrometry (HS-SPME-GC × GC-QTOF-MS). The experimental parameters were optimised, involving the use of a DVB/C-WR/PDMS fibre at a temperature of 80 °C for a duration of 30 min. A total of 344 VOCs comprising aldehydes, ketones, alcohols, ethers, esters, alkanes and aromatic compounds, were tentatively identified in the samples. Twelve compounds believed to be from biogenic sources had a high odour impact making them major contributors to potential taint from the paperboard samples. Significant attention should be devoted to five compounds namely, 2-methylnaphthalene, 2-pentyl-furan, furfural, 1-octen-3-one and 1-octen-3-ol due to their potential adverse impact on the organoleptic qualities of packaged food items and their potential toxicity.Abbreviations: C-WR: carbon wide range; DVB: divinylbenzene; GC-MS: gas chromatography - mass spectrometry; GCxGC-QTOF-MS: comprehensive two-dimensional gas chromatography coupled to quadrupole-time-of-flight - mass spectrometry; HS-SPME: headspace - solid phase microextraction; LOD: limit of detection; LOQ: limit of quantification; OAV: odor activity values; PDMS: polydimethylsiloxane; RI: retention index; TTC: threshold of toxicological concern; VOC: volatile organic compound.

Influence of cooking conditions on the migration of silicone oligomers from silicone rubber baking molds to food simulants.

The stability, surface micromorphology, and volatile organic compounds (VOCs) of silicone rubber baking molds (SRBMs) were tested while using the molds under severe conditions: baking at 175 °C, microwaving at 800 W, and freezing at -18 °C. Moreover, migration tests of SRBMs to food simulants (isooctane, 95% ethanol, and Tenax®) at 70 °C for 2 h (accelerated conditions) were performed. The initial total VOCs concentration was 2.53% higher than that recommended by BfR Recommendations on Food Contact Materials. Therefore, the SRBM samples were considered as badly tempered materials, and 18 different types of silicone oligomers were identified during the migration tests. The following percentage of silicone oligomers with a molecular weight lower than 1000 Da in isooctane, 95% ethanol, and Tenax® were detected: 70.7%, 91.8%, and 97.2%, respectively. It has been proven that previous baking treatments effectively reduced the content of silicone oligomers migrating from SRBMs.

Non-target screening of (semi-)volatiles in food-grade polymers by comparison of atmospheric pressure gas chromatography quadrupole time-of-flight and electron ionization mass spectrometry.

Atmospheric pressure gas chromatography (APGC) coupled to quadrupole time-of-flight (QTOF) and electron ionization mass spectrometry together with commercial library search are two complementary techniques for non-target screening of volatile and semi-volatile compounds. Optimization was first conducted to achieve easier search of correspondent peaks between the two systems. Analytical strategy for the determination of volatile and semi-volatile compound with different identification confidence levels was then proposed and applied to food contact grade polypropylene (PP) samples. Identification was found to be much easier and less time-consuming especially when correspondent peak was found in the two systems with the help of library search, exact mass of precursor and fragment ions as well as Kovats Index (KI). The behavior of APGC-QTOF-MS was also further investigated. Apart from the M+. ion and the well-known adduct [M+H]+ others such as [M-3H + O]+, [M-3H+2O]+ and [M-H+3O]+ were also observed for n-alkanes. Besides, new reaction products were found, formed by diol compounds (1-Monostearoylglycerol, 2-Monostearoylglycerol and NX 8000K) and silanediol dimethyl, which would be a transformation product of the silicone base septum or the methyl 5% phenyl polysiloxane based column. These new compounds were only detected in APGC-MS-QTOF as EI-GC-MS was not enough sensitive for this purpose.

Effect of organic additives on silver release from nanosilver-polyethylene composite films to acidic food simulant.

The effects of organic additives (Irgafos 168, Irganox 1076, Tinuvin 622, Chimassorb 944, UV-P, and UV-531) on silver release from nanosilver-polyethylene composite films into an acidic food simulant (3% acetic acid) were investigated using inductively coupled plasma mass spectrometry. The limits of detection and quantification, coefficient of determination, and recoveries of the method used were 3.7ngL-1, 12.4ngL-1, 0.999, and 89-113%, respectively. The results indicated that additives can affect silver release via two simultaneous processes: (i) reactions between organic additives and silver that promote silver release from the composite film to the acidic food simulant; and (ii) the promotion or inhibition of silver release by affecting silver oxidation. High temperature and humidity treatment of the composite films was found to significantly increase silver release by promoting silver oxidation.

Determination of Polymer Additives-Antioxidants, Ultraviolet Stabilizers, Plasticizers and Photoinitiators in Plastic Food Package by Accelerated Solvent Extraction Coupled with High-Performance Liquid Chromatography.

An analytical method for the quantitative determination of 4 antioxidants, 9 ultraviolet (UV) stabilizers, 12 phthalate plasticizers and 2 photoinitiators in plastic food package using accelerated solvent extraction (ASE) coupled with high-performance liquid chromatography-photodiode array detector (HPLC-PDA) has been developed. Parameters affecting the efficiency in the process such as extraction and chromatographic conditions were studied in order to determine operating conditions. The analytical method of ASE-HPLC showed good linearity with good correlation coefficients (R ≥ 0.9833). The limits of detection and quantification were between 0.03 and 0.30 µg mL(-1) and between 0.10 and 1.00 µg mL(-1) for 27 analytes. Average spiked recoveries for most analytes in samples were >70.4% at 10, 20 and 40 µg g(-1) spiked levels, except UV-9 and Irganox 1010 (58.6 and 64.0% spiked at 10 µg g(-1), respectively), the relative standard deviations were in the range from 0.4 to 15.4%. The methodology has been proposed for the analysis of 27 polymer additives in plastic food package.

Effect of antioxidants and light stabilisers on silver migration from nanosilver-polyethylene composite packaging films into food simulants.

The effect of exposure time, temperature and food simulants, especially additives, on the release of silver from nanosilver-polyethylene composite films to food simulants was studied. Two different type of nanosilver-polyethylene composite films (with or without additives) were chosen to conduct the experiment with the aim of exploring the behaviour of silver migration. It was shown that the migration of silver into 50% ethanol at 40 and 70°C was much less than that into 3% acetic acid. With the increase of exposure time and temperature, the release of silver increased. The migration even continued after a long exposure time (14 days at 20°C, 10 days at 40°C, and 6 days at 70°C respectively). Only about 0.15‰ of silver migrated from composite films with the additives into 3% acetic acid after 6 days of exposure at 70°C, while about 1.3% of silver migrated from composite films that did not contain additives under the same conditions. This could be because the addition of the antioxidants and light stabilisers prevents silver from being oxidised, which is an important way for the release of silver.

[Continuous in situ monitoring of the dissolution rate of solid pharmaceutical preparations using a multiple channel fiber-optic chemical sensor].

AIM: To study the dissolution rate of solid pharmaceutical preparation on-line, a multiple channel fiber-optic chemical sensor based on fluorescence multiple quenching (FOCSMQ) without filtering and sampling was made. METHODS: Using the multiple channel FOCSMQ linked with computer, the dissolution rates of ofloxacin tablets, metronidazole tablets and nitrofurantoin tablets were monitored continuously on-line. The instrument can give the sample data, display the real time curve and calculate the T1/2 and td automatically. A computer was used to select the best function from five common fitting models to fit the dissolution curve. RESULTS: The average recoveries of the FOCSMQ method were 97.4%-104.4%, 97.4%-103.8% and 96.6%-102.1%. The RSDs (n = 6) of within-day and between-day were less than 5%. The parameters of the dissolution and all results of measurement using the instrument have no significant difference compared with the Chinese Pharmacopoeia (ChP) (2000) method and the United States Pharmacopoeia (USP) (23) method (P > 0.05). It does not need sampling and dilution, and never contaminate sample. It can shorten time of the experiment. CONCLUSION: The method is simple, rapid and reliable.