Regulating the Electronic Structure of Metal-Organic Frameworks by Introducing Mn for Enhanced Oxygen Evolution Activity.

The construction of low-cost and highly efficient oxygen evolution electrocatalysts is paramount for clean and sustainable hydrogen energy. In recent years, metal-organic framework (MOF) OER electrocatalysts have attracted tremendous research attention. Herein, we report a simple and facile strategy to construct bimetallic MOFs (named CoMn0.01) for enhancing OER catalytic performance. Significantly, CoMn0.01 exhibited remarkable OER activity (255 mV at 10 mA cm-2) and a low Tafel slope of 66 mV dec-1, superior to those of commercial benchmark electrocatalysts (RuO2, 352 mV, 178 mV dec-1). Besides, the catalyst demonstrated outstanding longevity for 144 h at a current density of 100 mA cm -2. Mn doping can regulate the electronic structure of Co MOFs, which optimizes charge transfer capability and improves conductivity.

Composites of W18O49 Nanowires with g-C3N4/RGO Nanosheets for Broadband Light-Driven Photocatalytic Wastewater Purification.

Developing a photocatalyst that can effectively utilize the full solar spectrum remains a high-priority objective in the ongoing pursuit of efficient light-to-chemical energy conversion. Herein, the ternary nanocomposite g-C3N4/RGO/W18O49 (CN/RGO/WO) was constructed and characterized by a variety of techniques. Remarkably, under the excitation of photon energies ranging from the ultraviolet (UV) to the near-infrared (NIR) region, the photocatalytic performance of the CN/RGO/WO nanocomposite exhibited a significant enhancement compared with single component g-C3N4 or W18O49 nanosheets for the degradation of methyl orange (MO). The MO photodegradation rate of the optimal CN/1.0 wt% RGO/45.0 wt% WO catalyst reached 0.816 and 0.027 min-1 under UV and visible light excitation, respectively. Even under low-energy NIR light, which is not sufficient to excite g-C3N4, the MO degradation rate can still reach 0.0367 h-1, exhibiting a significant enhancement than pure W18O49. The outstanding MO removal rate and stability were demonstrated by CN/RGO/WO nanocomposites, which arise from the synergistic effect of localized surface plasmon resonance effect induced by W18O49 under vis-NIR excitation and the Z-scheme nanoheterojunction of W18O49 and g-C3N4. In this work, we have exploited the great potential of integrating nonmetallic plasmonic nanomaterials and good conductor RGO to construct high-performance g-C3N4-based full-solar spectral broadband photocatalysts.

Facile Synthesis of GdF3:Yb3+, Er3+, Tm3+@TiO2-Ag Core-Shell Ellipsoids Photocatalysts for Photodegradation of Methyl Orange Under UV, Visible, and NIR Light Irradiation.

To enhance solar energy utilization efficiency, goal-directed design of architectures by combining nanocomponents of radically different properties, such as plasmonic, upconversion, and photocatalytic properties may provide a promising method to utilize the most energy in sunlight. In this work, a new strategy was adopted to fabricate a series of plasmonic Ag nanoparticles decorated GdF3:Yb3+, Er3+, Tm3+-core@porous-TiO2-shell ellipsoids, which exhibit high surface area, good stability, broadband absorption from ultraviolet to near infrared, and excellent photocatalytic activity. The results showed that photocatalytic activities of the as-obtained photocatalysts was higher than that of pure GdF3:Yb3+, Er3+, Tm3+ and GdF3:Yb3+, Er3+, Tm3+@TiO2 samples through the comparison of photodegradation rates of methyl orange under UV, visible, and NIR irradiation. The possible photocatalytic mechanism indicates that hydroxyl radicals and superoxide radical play a pivotal role in the photodegradation. Furthermore, the materials also showed exceptionally high stability and reusability under UV, visible, and NIR irradiation. All these results reveal that core-shell hierarchical ellipsoids exhibit great prospects for developing efficient solar photocatalysts.

Uniform and Well-Dispersed LuBO3 Hollow Microspheres: Synthesis, Formation and Photoluminescence Properties.

A hard template strategy is developed to fabricate the LuBO3: Eu3+/Tb3+ hollow microspheres using a novel multi-step transformation synthetic route for the first time with polystyrene (PS) spheres as the template, followed by the combination of a facile homogeneous precipitation method, an ion-exchange process, and a calcination process. The results show that the as-obtained LuBO3: Eu3+/Tb3+ hollow spheres have a uniform morphology with an average diameter of 1.8 µm and shell thickness of about 80 nm. When used as luminescent materials, the emission colors of LuBO3: Eu3+/Tb3+ samples can be tuned from red, through orange, yellow and green-yellow, to green by simply adjusting the relative doping concentrations of the activator ions under the excitation of ultraviolet (UV) light, which might have potential applications in the field such as light display systems and optoelectronic devices.

Facile Synthesis and Down-Conversion Emission of RE3+-Doped Lutetium Oxide Nanoparticles.

Lu2O3:RE3+ (RE3+ = Eu3+, Tb3+, Ho3+) nanoparticles have been successfully synthesized by a facile homogeneous precipitation method with subsequent sintering process. The crystal structure, morphology and luminescence properties of the as-prepared samples have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), photoluminescence (PL) and cathodoluminescence (CL) spectra. Upon ultraviolet (UV) and low-voltage electron beam excitation, Lu2O3:RE3+ (RE3+ = Eu3+, Tb3+, Ho3+) nanoparticles show strong red (Eu3+,5D0 → 7F2), green (Tb3+,5D4 → 7F5), and green (Ho3+,5S2 → 5I8) emissions. They exhibit a good advantage of multicolor emissions in the visible region, and endow these kinds of materials with potential application in many fields, such as light display systems, optoelectronic devices and biological imaging.

Highly Uniform Hollow GdF3 Ellipsoids: Controllable Synthesis, Characterization and Up-Conversion Luminescence Properties.

In this paper, the hollow GdF3 ellipsoids were successfully synthesized through a facile hydrothermal approach. The results indicated that the as-obtained GdF3 sample has an orthorhombic structure and the average length and diameter of the hollow ellipsoids are 750 nm and 350 nm, respectively. The possible formation mechanism of the hollow GdF3 ellipsoids has been presented. The upconversion (UC) luminescence properties of the hollow GdF3: Yb3+/Ln3+ (Ln3+ = Er3+, Tm3+, Ho3+) ellipsoids were systematically investigated, which showed green (Er3+, 4S3/2, 2H11/2 → 4I15/2), blue (Tm3+, 1G4 → 3H6), and green (Ho3+, 5S2 → 5I8) luminescence under 980 nm NIR excitation, respectively. Furthermore, the UC white light was successfully obtained in the GdF3: Yb3+/Er3+/Tm3+ sample through adjusting relative doping concentration of Yb3+, Er3+ and Tm3+ ions. These findings may reveal potential applications in the fields of laser, bioanalysis, optoelectronic and nanoscale devices due to multicolor emissions in the visible region.

A Yellow-Emitting Homoleptic Iridium(III) Complex Constructed from a Multifunctional Spiro Ligand for Highly Efficient Phosphorescent Organic Light-Emitting Diodes.

To suppress concentration quenching and to improve charge-carrier injection/transport in the emission layer (EML) of phosphorescent organic light-emitting diodes (PhOLEDs), a facial homoleptic iridium(III) complex emitter with amorphous characteristics was designed and prepared in one step from a multifunctional spiro ligand containing spiro[fluorene-9,9'-xanthene] (SFX) unit. Single-crystal X-ray analysis of the resulting fac-Ir(SFXpy)3 complex revealed an enlarged Ir···Ir distance and negligible intermolecular π-π interactions between the spiro ligands. The emitter exhibits yellow emission and almost equal energy levels compared to the commercial phosphor iridium(III) bis(4-phenylthieno[3,2-c]pyridinato-N,C2')acetylacetonate (PO-01). Dry-processed devices using a common host, 4,4'-bis(N-carbazolyl)-1,1'-biphenyl, and the fac-Ir(SFXpy)3 emitter at a doping concentration of 15 wt % exhibited a peak performance of 46.2 cd A-1, 36.3 lm W-1, and 12.1% for the current efficiency (CE), power efficiency (PE), and external quantum efficiency (EQE), respectively. Compared to control devices using PO-01 as the dopant, the fac-Ir(SFXpy)3-based devices remained superior in the doping range between 8 and 15 wt %. The current densities went up with increasing doping concentration at the same driving voltage, while the roll-offs remain relatively low even at high doping levels. The superior performance of the new emitter-based devices was ascribed to key roles of the spiro ligand for suppressing aggregation and assisting charge-carrier injection/transport. Benefiting from the amorphous stability of the emitter, the wet-processed device also exhibited respectful CE, PE, and EQE of 32.2 cd A-1, 22.1 lm W-1, and 11.3%, respectively, while the EQE roll-off was as low as 1.7% at the luminance of 1000 cd m-2. The three-dimensional geometry and binary-conjugation features render SFX the ideal multifunctional module for suppressing concentration quenching, facilitating charge-carrier injection/transport, and improving the amorphous stability of iridium(III)-based phosphorescent emitters.

The Syntheses, Structures, Fluorescence Properties and Biological Activity of two Novel Zinc(II) Complexes Controlled by the Tripodal Imidazole Ligand.

Two new zinc complexes, namely Zn(L(1))ClCH2NO(1) and {Zn(L(2))CH2NO}n▪N(CH3)3▪ClO4(2) (L(1) = 3,5-di(1H-imidazol-1-yl)pyridine L(2) = 1,3,5-tris(1-imidazolyl) benzene), have been synthesized, and characterized by IR spectra, elemental analysis, and a single crystal X-ray diffraction. Fluorescence spectroscopy indicated that two complexes presented strong DNA binding affinity constants to fish sperm DNA (FS-DNA). Gel electrophoresis assay demonstrated the ability of the complex to cleave the HL-60 DNA. Apoptotic study showed the complex exhibited significant cancer cell(KB) inhibitory rate.

Rare earth fluoride nano-/microstructures: hydrothermal synthesis, luminescent properties and applications.

Rare earth fluoride materials have attracted wide interest and come to the forefront in nanophotonics due to their distinct electrical, optical and magnetic properties as well as their potential applications in diverse fields such as optical telecommunication, lasers, biochemical probes, infrared quantum counters, and medical diagnostics. This review presents a comprehensive overview of the flourishing field of rare earth fluorides materials in the past decade. We summarize the recent research progress on the preparation, morphology, luminescent properties and application of rare earth fluoride-based luminescent materials by hydrothermal systems. Various rare earth fluoride materials are obtained by fine-tuning of experimental conditions, such as capping agents, fluoride source, acidity, temperature and reaction time. The controlled morphology, luminescent properties and application of the rare earth fluorides are briefly discussed with typical examples.

Facile synthesis and luminescence properties of Y2O3:Ln(3+) (Ln(3+) = Eu(3+), Tb(3+), Dy(3+), Sm(3+), Er(3+), Ho(3+), Tm(3+), Yb(3+)/Er(3+), Yb(3+)/Tm(3+), Yb(3+)/Ho(3+)) microspheres.

Multicolor and monodisperse Y2O3:Ln(3+) (Ln(3+) = Eu(3+), Tb(3+), Dy(3+), Sm(3+), Er(3+), Ho(3+), Tm(3+), Yb(3+)/Er(3+), Yb(3+)/Ho(3+)) microspheres were prepared through a facile urea-assisted homogeneous precipitation method followed by a subsequent calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectrum (EDS), Fourier transformed infrared (FT-IR), thermogravimetric analysis (TGA), photoluminescence (PL) and cathodoluminescence (CL) spectra were employed to characterize the samples. The XRD results reveal that the as-prepared spheres can be well indexed to cubic Y2O3 phase with high purity. The SEM and TEM images show the obtained Y2O3:Ln(3+) samples consist of regular nanospheres with the mean diameter of 350 nm. And the possible formation mechanism is also proposed. Upon ultraviolet and low-voltage electron beams excitation, Y2O3:Ln(3+) (Ln(3+) = Eu(3+), Tb(3+), Dy(3+), Sm(3+), Er(3+), Ho(3+), Tm(3+)) samples exhibit respective bright red (Eu(3+), (5)D0 --> (7)F2), green (Tb(3+), (5)D4 --> (7)F5), blue (Dy(3+), (4)F9/2 --> (6)H13/2), yellow (Sm(3+), (4)G5/2 --> (6)H7/2), green (Er(3+), (4)S3/2 --> (4)I15/2), green (Ho(3+), (5)S2 --> (5)I8), blue (Tm(3+), (1)D2 --> (3)F4) down-conversion (DC) emissions. Under 980 nm NIR irradiation, Y2O3:Ln(3+) (Ln(3+) = Yb(3+)/Er(3+), Yb(3+)/Tm(3+) and Yb(3+)/Ho(3+)) exhibit characteristic up-conversion (UC) emissions of green (Er(3+), (2)H11/2, (4)S3/2, (2)H11/2 --> (4)I5/2), blue (Tm(3+), (1)G4 --> (3)H6) and green (Ho(3+), (5)F4, (5)S2 --> (5)I8), respectively. These merits of multicolor emissions in the visible region endow this kind of material with potential applications in the field of light display systems, lasers, and optoelectronic devices.

Highly sensitive sensing of DPA by lanthanide metal-organic frameworks and detection of fiber membranes.

The detection of 2,6-pyridinecarboxylic acid (DPA), as a biomarker of Bacillus anthracis, has attracted wide attention. In previous reports of DPA detection, fluorescent probes may not have high specificity. Therefore, the rational design and development of fluorescent sensors with excellent performance is of great significance for the detection of DPA. In this study, two novel lanthanide metal-organic frameworks (Ln-MOFs) were synthesized by hydrothermal method using 3-polyfluorobiphenyl-3 ', 4,5 ' -tricarboxylic acid (H2FPTA) as ligand. Studies have shown that Ln-MOFs can detect DPA in real time, with detection limits of 0.54 µM and 0.67 µM, respectively, and have a high recovery rate (95 % -108 %) in fetal bovine serum. As a self-calibration sensor, other substances in the blood can be clearly distinguished by a two-dimensional fluorescence code diagram. After the Ln-MOFs were spun into nanofiber membranes, they responded quickly to DPA. This increases practicability and provides a promising idea for the development of simple and efficient ratio sensors.

Evaluating Fluorinated-Aniline Units with Functionalized Spiro[Fluorene-9,9'-Xanthene] as Hole-Transporting Materials in Perovskite Solar Cells and Light-Emitting Diodes.

In the field of perovskite optoelectronics, developing hole-transporting materials (HTMs) on the spiro[fluorene-9,9'-xanthene] (SFX) platform is one of the current research focuses. The SFX inherits the merits of spirobifluorene in terms of the configuration and property, but it is more easily derivatized and regulated by virtue of its binary structure. In this work, we design and synthesize four isomeric SFX-based HTMs, namely m-SFX-mF, p-SFX-mF, m-SFX-oF, and p-SFX-oF, through varying the positions of fluorination on the peripheral aniline units and their substitutions on the SFX core, and the optoelectronic performance of the resulting HTMs is evaluated in both perovskite solar cells (PSCs) and light-emitting diodes (PeLEDs) by the vacuum thermal evaporating hole-transporting layers (HTLs). The HTM p-SFX-oF exhibits an improved power conversion efficiency of 15.21% in an inverted PSC using CH3NH3PbI3 as an absorber, benefiting from the deep HOMO level and good HTL/perovskite interface contact. Meanwhile, the HTM m-SFX-mF provides a maximum external quantum efficiency of 3.15% in CsPb(Br/Cl)3-based PeLEDs, which is attributed to its perched HOMO level and shrunken band-gap for facilitating charge carrier injection and then exciton combination. Through elucidating the synergistic position effect of fluorination on aniline units and their substitutions on the SFX core, this work lays the foundation for developing low-cost and efficient HTMs in the future.

Portable and Recyclable Luminescent Lanthanide Coordination Polymer Film Sensors for Adenosine Triphosphate in Urine.

Adenosine triphosphate (ATP) is a small molecule that is released to the urine from bladder urothelial cells and the bladder mucosal band of the human body. In certain cases, ATP can serve as a biomarker in bladder disease. For the practical applicability of luminescent sensors for ATP in urine, it is significant to find a new strategy for making the detection progress simple and available for in-field urine analysis. Here, a novel luminescent lanthanide coordination polymer (Tb-BPA) was designed and synthesized for quick and sensitive detection of ATP through luminescence quenching with a quenching constant of 4.90 × 103 M-1 and a detection limit of 0.55 × 10-6 M. Besides, Tb-BPA has excellent anti-interference ability and can detect ATP in simulated urine with a small relative standard deviation (<4%). Moreover, the luminescent polyacrylonitrile nanofiber films modified by Tb-BPA were prepared by electrospinning and were used for ATP visual detection. Notably, this film is easy to recover and reuse, and maintains good detection performance after at least 7 cycles.

Dodecahedral hollow multi-shelled Co3O4/Ag:ZnIn2S4 photocatalyst for enhancing solar energy utilization efficiency.

Employing semiconductor photocatalysts featuring a hollow multi-shelled (HoMs) structure to establish a heterojunction is an effective approach to addressing the issues of low light energy utilization and severe recombination of photogenerated charge carriers. To take advantage of these key factors in semiconductor photocatalysis, here, a dodecahedral HoMs Co3O4/Ag:ZnIn2S4 photocatalyst (denoted as Co3O4/AZIS) was firstly synthesized by coupling Ag+-doped ZnIn2S4 (AZIS) nanosheets with dodecahedral HoMs Co3O4. The unique HoMs structure of the photocatalyst can not only effectively promote the separation and transfer of photo-induced charge, but also improve the utilization rate of visible light, exposing rich active sites for the photocatalytic redox reaction. The photocatalytic experiment results showed that the Co3O4/90.0 wt% AZIS photocatalyst has a high hydrogen (H2) production rate (695.0 µmol h-1 g-1) and high methyl orange (MO) degradation rate (0.4243 min-1). This work provides a feasible strategy for the development of HoMs heterojunction photocatalysts with enhanced H2 production and degradation properties of organic dyes.

Multiresponsive luminescent metal-organic framework for cooking oil adulteration detection and gallium(III) sensing.

A new 3D metal-organic framework {[Cd16(tr2btd)10(dcdps)16(H2O)3(EtOH)]∙15DMF}n (MOF 1, tr2btd = 4,7-di(1,2,4-triazol-1-yl)benzo-2,1,3-thiadiazole, H2dcdps = 4,4'-sulfonyldibenzoic acid) was obtained and its luminescent properties were studied. MOF 1 exhibited bright blue-green luminescence with a high quantum yield of 74 % and luminescence quenching response to a toxic natural polyphenol gossypol and luminescence enhancement response to some trivalent metal cations (Fe3+, Cr3+, Al3+ and Ga3+). The limit of gossypol detection was 0.20 µM and the determination was not interfered by the components of the cottonseed oil. The limit of detection of gallium(III) was 1.1 µM. It was demonstrated that MOF 1 may be used for distinguishing between the genuine sunflower oil and oil adulterated by crude cottonseed oil through qualitative luminescent and quantitative visual gossypol determination.

Hydrothermal synthesis, characterization and luminescence properties of YbVO4:Ln3+ (Ln3+ = Er3+, Tm3+, Ho3+) nanocrystals.

Ytterbium orthovanadate YbVO4 nanocrystals with uniform size and shape were successfully synthesized through a facile hydrothermal approach using sodium tartrate (Na2tar) as the chelating ligand. X-ray diffraction (XRD), energy-dispersive X-ray spectrum (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and photoluminescence (PL) spectra were taken to characterize the phases, morphologies, sizes, and luminescence properties of the samples. The results indicate that the YbVO4 samples can be rationally modified in size and morphology by altering the Na2tar content, pH value and reaction time. The possible formation mechanism of the YbVO4 samples is proposed on the basis of time-dependent experiments. Additionally, the UC luminescence properties and the emission mechanisms of YbVO4:Ln3+ (Ln3+ = Er3+, Tm3+, Ho3+) samples were systematically investigated, which show green (Er3+, 4S(3/2), 2H(11/2) --> 4I(15/2)), blue (Tm3+, 1G(4) --> 3H(6)) and green (Ho3+, 5S(2) --> 5I(8)) luminescence under 980 nm NIR excitation, respectively. These merits of multicolor emissions in the visible region endow this kind of material with potential applications in the field of light display systems, lasers, and optoelectronic devices.

Unraveling the Position Effect of Spiroxanthene-Based n-Type Hosts for High-Performance TADF-OLEDs.

For developing high-performance organic light-emitting diodes (OLEDs) with thermally activated delayed fluorescent (TADF) emitters, the diphenyltriazine (TRZ) unit was introduced onto the 2'- and 3'-positions of xanthene moiety of spiro[fluorene-9,9'-xanthene] (SFX) to construct n-type host molecules, namely 2'-TRZSFX and 3'-TRZSFX. The outward extension of the TRZ unit, induced by the meta-linkage, resulted in a higher planarity between the TRZ unit and xanthene moiety in the corresponding 3'-TRZSFX. Additionally, this extension led to a perched T1 level, as well as a lower unoccupied molecular orbital (LUMO) level when compared with 2'-TRZSFX. Meanwhile, the 3'-TRZSFX molecules in the crystalline state presented coherent packing along with the interaction between TRZ units; the similar packing motif was spaced apart from xanthene moieties in the 2'-TRZSFX crystal. These endowed 3'-TRZSFX superior electron transport capacity in single-carrier devices relative to the 2'-TRZSFX-based device. Hence, the 3'-TRZSFX-based TADF-OLED showed remarkable electroluminescent (EL) performance under the operating luminance from turn-on to ca. 1000 cd·m-2 with a maximum external quantum efficiency (EQEmax) of 23.0%, thanks to its matched LUMO level with 4CzIPN emitter and better electron transport capacity. Interestingly, the 2'-TRZSFX-based device, with an EQEmax of 18.8%, possessed relatively low roll-off and higher efficiency when the operating luminance exceeded 1000 cd·m-2, which was attributed to the more balanced carrier transport under high operating voltage. These results were elucidated by the analysis of single-crystal structures and the measurements of single-carrier devices, combined with EL performance. The revealed position effect of the TRZ unit on xanthene moiety provides a more informed strategy to develop SFX-based hosts for highly efficient TADF-OLEDs.

The construction of a heterostructured RGO/g-C3N4/LaCO3OH composite with enhanced visible light photocatalytic activity for MO degradation.

The construction of a heterojunction and the introduction of a cocatalyst can both promote the transfer of photogenerated electrons, which are effective strategies to enhance photocatalytic efficiency. In this paper, a ternary RGO/g-C3N4/LaCO3OH composite was synthesized by constructing a g-C3N4/LaCO3OH heterojunction and introducing a non-noble metal cocatalyst RGO through hydrothermal reactions. TEM, XRD, XPS, UV-vis diffuse reflectance spectroscopy, photo-electrochemistry and PL tests were carried out to characterize the structures, morphologies and carrier separation efficiencies of products. Benefiting from the boosted visible light absorption capability, reduced charge transfer resistance and facilitated photogenerated carrier separation, the visible light photocatalytic activity of the ternary RGO/g-C3N4/LaCO3OH composite was effectively improved, resulting in a much increased MO (methyl orange) degradation rate of 0.0326 min-1 compared with LaCO3OH (0.0003 min-1) and g-C3N4 (0.0083 min-1). Moreover, by combining the results of the active species trapping experiment with the bandgap structure of each component, the mechanism of the MO photodegradation process was proposed.

Novel palladium(II) complexes containing a sulfur ligand: structure and biological activity on HeLa cells.

Two novel palladium(II) complexes with a thiosalicylic acid (HSC(6)H(4)CO(2)H) ligand, with the formulas [Pd(TSA)(L)]·mH(2)O (TSA is thiosalicylic acid; in complex 1, L is 1,10-phenanthroline and m = 1; in complex 2, L is 2,2'-bipyridine and m = 2), have been synthesized and characterized. The coordination geometry of both palladium atoms is square planar; they are four-coordinated and each is coordinated in an N,N,O(-),S(-) mode. There is a sigmoid oxygen chain in complex 1, but an oxygen ring in complex 2. The competitive binding of the complexes to HeLa cell DNA (HL-DNA) has been investigated by fluorescence spectroscopy. The results show that the two complexes have the ability to bind with HL-DNA. Viscosity studies suggest that the complexes bind to DNA by intercalation. Gel electrophoresis assay demonstrated the ability of the complexes to cleave the HL-DNA. The two complexes exhibit cytotoxic specificity and a significant cancer cell inhibitory rate. The apoptosis tests indicated that the complexes have an apoptotic effect. Furthermore, complex 1 exhibits more biological activity than complex 2, which is mainly because the area of the aromatic ring of 1,10-phenanthroline is larger than that of 2,2'-bipyridine.

Two novel zinc-based MOFs as luminescence sensors to detect phenylglyoxylic acid.

Automobile exhaust gases, plastic pollutants, smoking, and other harmful substances can cause serious harm to human beings and the environment. Styrene, as a common airborne toxin, enters the human body through breathing or the skin and is discharged in the form of phenylglyoxylic acid (PGA). Therefore, specific, sensitive and trace detection of PGA is particularly important. Here, two zinc-based metal-organic frameworks {[Zn2L1(DMF)2H2O](DMF)2H2O}n, {[Zn4(L2)2(DMF)2(H2O)3](DMF)8}n (L1 = 2,5-bis((3-carboxylphenyl)amino)terephthalic acid, L2 = 2,5-bis((4-carboxyphenyl)amino)terephthalic acid) have been reported as 1 and 2, respectively. Both 1 and 2 present 3D structures, which can both be simplified as 4,4,4-c net topology. It is worth mentioning that 2 has two different kinds of Zn SBUs as connecting nodes in the structure. Besides, compared with the other materials for the detection of PGA, 1 and 2 exhibit relatively low detection limits (LODs), both in water and in urine (where the LODs for 1 in water and urine were 0.33 µM and 0.43 µM in the range of 0-0.39 mM, and those for 2 were 0.28 µM and 0.49 µM in the range of 0-0.59 mM, respectively). In addition, the sensors have excellent anti-interference ability, high stability, rapid response, and can easily distinguish between different concentrations of PGA with the naked eye. The developed paper probes were suitable for practical sensing applications for portable detection of PGA in urine.