Structure Formation in an Ionic Liquid Wetting Layer: A Combined STM, IRAS, DFT and MD Study of [C2 C1 Im][OTf] on Au(111).

In a solid catalyst with ionic liquid layer (SCILL), ionic liquid (IL) coatings are used to improve the selectivity of noble metal catalysts. To understand the origins of this selectivity control, we performed model studies by surface science methods in ultrahigh vacuum (UHV). We investigated the growth and thermal stability of ultrathin IL films by infrared reflection absorption spectroscopy (IRAS). We combined these experiments with scanning tunneling microscopy (STM) to obtain information on the orientation of the ions, the interactions with the surface, the intermolecular interactions, and the structure formation. Additionally, we performed DFT calculations and molecular dynamics (MD) simulations to interpret the experimental data. We studied the IL 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C2 C1 Im][OTf] on Au(111) surfaces. We observe a weakly bound multilayer of [C2 C1 Im][OTf], which is stable up to 390 K, while the monolayer desorbs at ∼450 K. [C2 C1 Im][OTf] preferentially adsorbs at the step edges and elbows of the herringbone reconstruction of Au(111). The anion adsorbs via the SO3 group with the molecular axis perpendicular to the surface. At low coverage, the [C2 C1 Im][OTf] crystallizes in a glass-like 2D phase with short-range order. At higher coverage, we observe a phase transition to a 6-membered ring structure with long-range order.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

The front cover artwork is provided by the groups of Prof. Hans-Peter Steinrück and Prof. Peter Wasserscheid at the Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg. The image shows substitution of volatile acetonitrile ligands by a nitrile-functionalized imidazolium cation. The formed cationic complex and the counter ions exhibit a specific preferential orientation at the ionic liquid/gas interface, which can be studied by angle-resolved XPS. Read the full text of the Research Article at 10.1002/cphc.202200391.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C3 CNC1 Im][Tf2 N] and [C1 CNC1 Pip][Tf2 N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

Modifying the Electrocatalytic Selectivity of Oxidation Reactions with Ionic Liquids.

The "solid catalyst with ionic liquid layer" (SCILL) is an extremely successful new concept in heterogeneous catalysis. The idea is to boost the selectivity of a catalyst by its modification with an ionic liquid (IL). Here, we show that it is possible to use the same concept in electrocatalysis for the selective transformation of organic compounds. We scrutinize the electrooxidation of 2,3-butanediol, a reaction which yields two products, singly oxidized acetoin and doubly oxidized diacetyl. When adding the IL (1-ethyl-3-methyl-imidazolium trifluormethanesulfonate, [C2 C1 Im][OTf]), the selectivity for acetoin increases drastically. By in situ spectroscopy, we analyze the underlying mechanism: Specific adsorption of the IL anions suppresses the activation of water for the second oxidation step and, thus, enhances the selectivity for acetoin. Our study demonstrates the great potential of this approach for selective transformation of organic compounds.

Adsorption Motifs and Molecular Orientation at the Ionic Liquid/Noble Metal Interface: [C2C1Im][NTf2] on Pt(111).

In solid catalysts with ionic liquid layers (SCILLs), ionic liquid (IL) thin films are used to modify the activity and selectivity of catalytic materials. In this work, we investigated the adsorption behavior of the IL 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [C2C1Im][NTf2] on Pt(111) by combining experimental and theoretical studies. Under ultrahigh vacuum (UHV) conditions, the IL was deposited onto a Pt(111) single crystal surface by physical vapor deposition (PVD) at different surface temperatures (200, 300, and 400 K). The adsorption process was monitored by in situ infrared reflection absorption spectroscopy (IRAS). Complementary to the IRAS studies, we performed density functional theory (DFT) calculations and analyzed the adsorption motifs and orientation of the IL ions. In total, we calculated four different systems: (a) [C2C1Im]+ and [NTf2]- ions in the gas phase; [NTf2]- anions in (b) small (4 × 4) and (c) large (6 × 6) Pt(111) supercells; and (d) a complete ion pair of [C2C1Im][NTf2] in a (6 × 6) Pt(111) supercell. Based on DFT, we simulated IR spectra and compared them to the experimental data. Our results suggest that the binding motif and orientation of the IL is strongly dependent on the actual IL coverage. In the monolayer (ML), [NTf2]- interacts strongly with the metal surface and adopts a specific orientation in which it interacts with the Pt surface via the SO2 groups. Also the [C2C1Im]+ cations adopt a preferential orientation up to coverages of 1 ML. Upon transition to the multilayer region, the specific orientation of the ions is gradually lost.

Capturing spatially resolved kinetic data and coking of Ga-Pt supported catalytically active liquid metal solutions during propane dehydrogenation in situ.

Supported liquid phase catalysis has great potential to unify the advantages from both homogeneous and heterogeneous catalysis. Recently, we reported supported catalytically active liquid metal solutions (SCALMS) as a new class of liquid phase catalysts. SCALMS enable high temperature application due to the high thermal stability of liquid metals when compared to supported molten salts or ionic liquids. The highly dynamic liquid metal/gas interface of SCALMS allows for catalysis over single atoms of an active metal atom within a matrix of liquid gallium. In the present study, kinetic data is acquired along the catalyst bed in a compact profile reactor during propane dehydrogenation (PDH) over gallium-platinum SCALMS. The reactor design allows for the analysis of the temperature and gas phase composition along the catalyst bed with a high spatial resolution using a sampling capillary inside the reactor. The concentration profiles suggest enhanced deactivation of the catalyst at the end of the bed with a deactivation front moving from the end to the beginning of the catalyst bed over time on stream. Only minor amounts of side products, formed via cracking of propane, were identified, supporting previously reported high selectivity of SCALMS during alkane dehydrogenation. The acquired data is supported by in situ high-resolution thermogravimetry coupled with mass spectrometry to monitor the activity and coking behaviour of SCALMS during PDH. The results strongly suggest an enhanced formation of coke over Al2O3-supported SCALMS when compared to using SiO2 as the support material.

Structural and functional dissection reveals distinct roles of Ca2+-binding sites in the giant adhesin SiiE of Salmonella enterica.

The giant non-fimbrial adhesin SiiE of Salmonella enterica mediates the first contact to the apical site of epithelial cells and enables subsequent invasion. SiiE is a 595 kDa protein composed of 53 repetitive bacterial immunoglobulin (BIg) domains and the only known substrate of the SPI4-encoded type 1 secretion system (T1SS). The crystal structure of BIg50-52 of SiiE revealed two distinct Ca2+-binding sites per BIg domain formed by conserved aspartate or glutamate residues. In a mutational analysis Ca2+-binding sites were disrupted by aspartate to serine exchange at various positions in the BIg domains of SiiE. Amounts of secreted SiiE diminish with a decreasing number of intact Ca2+-binding sites. BIg domains of SiiE contain distinct Ca2+-binding sites, with type I sites being similar to other T1SS-secreted proteins and type II sites newly identified in SiiE. We functionally and structurally dissected the roles of type I and type II Ca2+-binding sites in SiiE, as well as the importance of Ca2+-binding sites in various positions of SiiE. Type I Ca2+-binding sites were critical for efficient secretion of SiiE and a decreasing number of type I sites correlated with reduced secretion. Type II sites were less important for secretion, stability and surface expression of SiiE, however integrity of type II sites in the C-terminal portion was required for the function of SiiE in mediating adhesion and invasion.

Spectroscopic Observation and Molecular Dynamics Simulation of Ga Surface Segregation in Liquid Pd-Ga Alloys.

Liquid binary Pd-Ga alloys with low Pd contents of 0.8, 1.8, and 4.7 at % of Pd were examined as a function of sample temperature in ultra-high vacuum by using angle-resolved XPS. Upon cooling from 750 to 400 K, a pronounced temperature-dependence of the Pd concentration in the liquid phase was observed, which was explained by the transition from the pure liquid phase to a two-phase system, consisting of a solid Ga5 Pd phase and a Pd-depleted liquid Pd-Ga alloy. In the liquid Pd-Ga alloy, Pd is always depleted from the topmost interface layer, as deduced from angle-resolved XPS at 0 and 80° emission, independent of temperature and Pd concentration. This observation is interpreted as an inhomogeneous depth distribution function of Pd, that is, the segregation of Ga to the surface of the liquid phase. The results of a DFT-based molecular dynamics simulation (MD) independently show interfacial stratification of Ga and an inhomogeneous Pd distribution along the surface normal. The evaluation of the experimental data with a rigid layer model based on the MD calculations leads to excellent agreement with the simulation.

Photochemistry in a soft-glass single-ring hollow-core photonic crystal fibre.

A hollow-core photonic crystal fibre (HC-PCF), guided by photonic bandgap effects or anti-resonant reflection, offers strong light confinement and long photochemical interaction lengths in a microscale channel filled with a solvent of refractive index lower than that of glass (usually fused silica). These unique advantages have motivated its recent use as a highly efficient and versatile microreactor for liquid-phase photochemistry and catalysis. In this work, we use a single-ring HC-PCF made from a high-index soft glass, thus enabling photochemical experiments in higher index solvents. The optimized light-matter interaction in the fibre is used to strongly enhance the reaction rate in a proof-of-principle photolysis reaction in toluene.

Vacuum Surface Science Meets Heterogeneous Catalysis: Dehydrogenation of a Liquid Organic Hydrogen Carrier in the Liquid State.

Ultrahigh vacuum (UHV) surface science techniques are used to study the heterogeneous catalytic dehydrogenation of a liquid organic hydrogen carrier in its liquid state close to the conditions of real catalysis. For this purpose, perhydrocarbazole (PH), otherwise volatile under UHV, is covalently linked as functional group to an imidazolium cation, forming a non-volatile ionic liquid (IL). The catalysed dehydrogenation of the PH unit as a function of temperature is investigated for a Pt foil covered by a macroscopically thick PH-IL film and for Pd particles suspended in the PH-IL film, and for PH-IL on Au as inert support. X-ray photoelectron spectroscopy and thermal desorption spectroscopy allows us to follow in situ the catalysed transition of perhydrocarbazole to carbazole at technical reaction temperatures. The data demonstrate the crucial role of the Pt and Pd catalysts in order to shift the dehydrogenation temperature below the critical temperature of thermal decomposition.

Pd Nanoparticle Formation in Ionic Liquid Thin Films Monitored by in situ Vibrational Spectroscopy.

Ionic liquids (ILs) are flexible reaction media and solvents for the synthesis of metal nanoparticles (NPs). Here, we describe a new preparation method for metallic NPs in nanometer thick films of ultraclean ILs in an ultrahigh vacuum (UHV) environment. CO-covered Pd NPs are formed by simultaneous and by sequential physical vapor deposition (PVD) of the IL and the metal in the presence of low partial pressures of CO. The film thickness and the particle size can be controlled by the deposition parameters. We followed the formation of the NPs and their thermal behavior by time-resolved IR reflection absorption spectroscopy (TP-IRAS) and by temperature-programmed IRAS (TR-IRAS). Codeposition of Pd and [C1C2Im][OTf] in CO at 100 K leads to the growth of homogeneous multilayer films of CO-covered Pd aggregates in an IL matrix. The size of these NPs can be controlled by the metal fraction in the co-deposit. With increasing metal fraction, the size of the Pd NPs also increases. At very low metal content, small Pd carbonyl-like species are formed, which bind CO in on-top geometry only. Upon annealing, the [OTf](-) anion coadsorbs at the NP surface and partially displaces CO. Co-adsorption of CO and IL is indicated by a strong red-shift of the CO stretching bands. While the weakly bound on-top CO is mainly replaced below the melting transition of the IL, coadsorbate shells with bridge-bonded CO and IL are stable well above the melting point. Larger three-dimensional Pd NPs can be prepared by PVD of Pd onto a solid [C1C2Im][OTf] film at 100 K. Upon annealing, on-top CO desorbs from these NPs below 200 K. Upon melting of the IL film, the CO-covered Pd NPs immerse into the IL and again form a stable coadsorbate shell that consists of bridge-bonded CO and the IL.

Influence of substituents and functional groups on the surface composition of ionic liquids.

We have performed a systematic study addressing the surface behavior of a variety of functionalized and non-functionalized ionic liquids (ILs). From angle-resolved X-ray photoelectron spectroscopy, detailed conclusions on the surface enrichment of the functional groups and the molecular orientation of the cations and anions is derived. The systems include imidazolium-based ILs methylated at the C2 position, a phenyl-functionalized IL, an alkoxysilane-functionalized IL, halo-functionalized ILs, thioether-functionalized ILs, and amine-functionalized ILs. The results are compared with the results for corresponding non-functionalized ILs where available. Generally, enrichment of the functional group at the surface is only observed for systems that have very weak interaction between the functional group and the ionic head groups.

Interface controls spontaneous crystallization in thin films of the ionic liquid [C2C1Im][OTf] on atomically clean Pd(111).

A total of 5-30 monolayer thick films of the ionic liquid (IL) [C2C1Im][OTf] were vaporized in vacuo onto an atomically clean Pd(111) single crystal surface at 220 K. Time- and temperature-resolved infrared reflection-absorption spectroscopy reveals growth, interactions with the metallic support, and the macroscopic phase behavior of the layer. At 220 K, the IL layer first grows in the form of a glassy phase. Crystallization of the IL was witnessed above a critical thickness of about 10 monolayers. On the basis of the known bulk crystal structure of the IL, we suggest the formation of well-oriented checkerboard-like crystalline film structures on the surface. The preferential orientation manifested by the crystal phase with regard to the macroscopic metallic surface is attributed to strong interactions between anionic headgroups and the metal.

Kinetics of dehydrogenation of n-heptane over GaPt supported catalytically active liquid metal solutions (SCALMS).

The concept of Supported Catalytically Active Liquid Metal Solutions (SCALMS) was explored for the catalytic dehydrogenation of n-heptane. For this purpose, a GaPt on alumina (Ga84Pt/Al2O3) was compared with a Pt on alumina catalyst at different reaction temperatures and feed compositions. While the observed activation energies with both catalysts for the overall n-heptane depletion rate were similar with both catalysts, the SCALMS systems provides a lower activation energy for the desired dehydrogenation path and significantly higher activation energies for the undesired aromatization and cracking reaction. Thus, the SCALMS catalyst under investigation shows technically interesting features, in particular at high temperature operation. The partial pressure variation revealed an effective reaction order of around 0.7 for n-heptane for both catalysts, while the effective order for hydrogen was 0.35 for Pt/Al2O3 and almost zero for SCALMS.

Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating.

The behavior of catalytic particles depends on their chemical structure and morphology. To reveal this information, the characterization with atom probe tomography has huge potential. Despite progresses and papers proposing various approaches towards the incorporation of particles inside atom probe tips, no single approach has been broadly applicable to date. In this paper, we introduce a workflow that allowed us to prepare atom probe specimens from Ga particles in suspension in the size range of 50 nm up to 2 µm. By combining dielectrophoresis and electrodeposition in a suitable way, we achieve a near-tip shape geometry, without a time-consuming FIB lift-out. This workflow is a simple and quick method to prepare atom probe tips and allows for a high preparation throughput. Also, not using a lift-out allowed us to use a cryo-stage, avoiding melting of the Ga particles, while ensuring a mechanical stable atom probe tip. The specimen prepared by this workflow enable a stable measurement and low fracture rates. RESEARCH HIGHLIGHTS: Enabling cryo-preparation of (nano)particles for the atom probe. Characterization of surface and bulk elemental distribution of GaPt model SCALMS.

Interactions of imidazolium-based ionic liquids with oxide surfaces controlled by alkyl chain functionalization.

From a different angle: Thin films of functionalized ionic liquids are deposited on cerium oxides following a surface science approach. The functionalization of the alkyl chain changes its orientation with respect to the surface plane from normal to parallel. This then leads to a different surface chemistry at higher temperatures.

Preparation of geometrically highly controlled Ga particle arrays on quasi-planar nanostructured surfaces as a SCALMS model system.

This study establishes a preparative route towards a model system for supported catalytically active liquid metal solutions (SCALMS) on nanostructured substrates. This model is characterized by a uniquely precise geometrical control of the gallium particle size distribution. In a SCALMS system, the Ga serves as a matrix material which can be decorated with a catalytically active material subsequently. The corresponding Ga containing precursor is spin-coated on aluminum based substrates, previously nanostructured by electrochemical anodization. The highly ordered substrates are functionalized with distinct oxide coatings by atomic layer deposition (ALD) independently from the morphology. After preparation of the metal particles on the oxide interface, the characterization of our model system in terms of its geometry parameters (droplet diameter, size distribution and population density) points to SiO2 as the best suited surface for a highly controlled geometry. This flexible model system can be functionalized with a dissolved noble metal catalyst for the application chosen.

Ga-Pt supported catalytically active liquid metal solutions (SCALMS) prepared by ultrasonication - influence of synthesis conditions on n-heptane dehydrogenation performance.

Supported catalytically active liquid metal solution (SCALMS) materials represent a recently developed class of heterogeneous catalysts, where the catalytic reaction takes place at the highly dynamic interface of supported liquid alloys. Ga nuggets were dispersed into nano-droplets in propan-2-ol using ultrasonication followed by the addition of Pt in a galvanic displacement reaction - either directly into the Ga/propan-2-ol dispersion (in situ) or consecutively onto the supported Ga droplets (ex situ). The in situ galvanic displacement reaction between Ga and Pt was studied in three different reaction media, namely propan-2-ol, water, and 20 vol% water containing propan-2-ol. TEM investigations reveal that the Ga-Pt reaction in propan-2-ol resulted in the formation of Pt aggregates on top of Ga nano-droplets. In the water/propan-2-ol mixture, the desired incorporation of Pt into the Ga matrix was achieved. The ex situ prepared Ga-Pt SCALMS were tested in n-heptane dehydrogenation. Ga-Pt SCALMS synthesized in pure alcoholic solution showed equal dehydrogenation and cracking activity. Ga-Pt SCALMS prepared in pure water, in contrast, showed mainly cracking activity due to oxidation of Ga droplets. The Ga-Pt SCALMS material prepared in water/propan-2-ol resulted in high activity, n-heptene selectivity of 63%, and only low cracking tendency. This can be attributed to the supported liquid Ga-Pt alloy where Pt atoms are present in the liquid Ga matrix at the highly dynamic catalytic interface.

Supraparticles on beads for supported catalytically active liquid metal solutions - the SCALMS suprabead concept.

A novel GaPt-based supported catalytically active liquid metal solution (SCALMS) material is developed by exploiting the suprabead concept: Supraparticles, i.e. micrometer-sized particles composed of nanoparticles assembled by spray-drying, are bonded to millimeter-sized beads. The suprabeads combine macroscale size with catalytic properties of nanoscale GaPt particles entrapped in their silica framework.

In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay.

In vitro cytotoxicity assessment is indispensable in developing new biodegradable implant materials. Zn, which demonstrates an ideal corrosion rate between Mg- and Fe-based alloys, has been reported to have excellent in vivo biocompatibility. Therefore, modifications aimed at improving Zn's mechanical properties should not degrade its biological response. As sufficient strength, ductility and corrosion behavior required of load-bearing implants has been obtained in plastically deformed Zn-3Ag-0.5Mg, the effect of simultaneous Ag and Mg additions on in vitro cytocompatibility and antibacterial properties was studied, in relation to Zn and Zn-3Ag. Direct cell culture on samples and indirect extract-based tests showed almost no significant differences between the tested Zn-based materials. The diluted extracts of Zn, Zn-3Ag, and Zn-3Ag-0.5Mg showed no cytotoxicity toward MG-63 cells at a concentration of ≤12.5%. The cytotoxic effect was observed only at high Zn2+ ion concentrations and when in direct contact with metallic samples. The highest LD50 (lethal dose killing 50% of cells) of 13.4 mg/L of Zn2+ ions were determined for the Zn-3Ag-0.5Mg. Similar antibacterial activity against Escherichia coli and Staphylococcus aureus was observed for Zn and Zn alloys, so the effect is attributed mainly to the released Zn2+ ions exhibiting bactericidal properties. Most importantly, our experiments indicated the limitations of water-soluble tetrazolium salt-based cytotoxicity assays for direct tests on Zn-based materials. The discrepancies between the WST-8 assay and SEM observations are attributed to the interference of Zn2+ ions with tetrazolium salt, therefore favoring its transformation into formazan, giving false cell viability quantitative results.