Interaction products of cytotoxic Cu(I) complexes with different solvent mixtures: an electrospray ionization mass spectrometry and density functional theory study.

RATIONALE: [Cu(P)4 ][BF4 ]-type complexes (P = tertiary phosphine) have shown significant antitumor activity. This biological property appears to be activated via formation of coordinative unsaturated [Cu(P)n ]+ species (n < 4), that may interact with various molecules starting from the solvent(s) in which they are dissolved. Aim of our study was to investigate the interaction of these species with different solvent mixtures. METHODS: The interaction has been investigated by electrospray ionization mass spectrometry, and the interaction products have been characterized by multiple collisional experiments, using an ion trap mass instrument. Density functional theory (DFT) calculation studies, using a meta-hybrid exchange correlation (xc) functional and an implicit solvent model, were employed to investigate the equilibrium distribution of species in solution. RESULTS: Depending on the nature of the solvent mixture and coordinated phosphine, three [Cu(P)4 ][BF4 ]-type complexes undergo dissociation with formation of [Cu(P)2 ]+ , [Cu(P)(solv)]+ and [Cu(solv)2 ]+ species (solv = solvent). Preferred collisional-induced fragmentation pathways provide qualitative information on the selectivity of [Cu(P)n ]+ for specific solvents and donor atoms. Formation free energies and equilibrium constants pertaining to [CuI (PTA)n ]+ , [CuI/II (solv)n ]m+ (n ≤ 4; m = 1, 2) and [CuI (PTA)2-k (sol)k ]+ (k = 1, 2) provide a comprehensive picture of equilibria in solution. CONCLUSIONS: Dimethyl sulfoxide (DMSO) and acetonitrile (MeCN) strongly affect [Cu(P)n ]+ assemblies producing mixed-ligand [Cu(P)(DMSO)]+ and [Cu(P)(MeCN)]+ species. Excess of both DMSO and MeCN solvents are able to fully displace coordinated phosphines giving [Cu(solv)2 ]+ -type adducts. The presence of phosphines in the native complex is mandatory to retain the reduced oxidation state of copper. Instead, the more labile [CuI (MeCN)4 ]+ complex dissolved in DMSO and MeCN displays a combination of Cu(I) and Cu(II) adducts. Copyright © 2016 John Wiley & Sons, Ltd.

Electrospray ionization in the study of the interactions between cytotoxic phosphino Cu(I) complexes and selected amino acids and GlyGlyHis peptide model.

Tetrahedral [Cu(P)4][BF4]-type complexes (P = tertiary phosphine) are a class of monopositively charged compounds that have shown notable antitumor activity in both in vitro and in vivo tests. This biological property appears to be related to the peculiar physicochemical characteristics of these compounds. Although thermodynamically stable, they are labile at micromolar concentrations. Such a behavior allows the Cu(I) ion in [Cu(P)n]+ assemblies (n < 4) to interact with surrounding molecules, including the rich peptide/protein environment that metal complexes have to face in the physiological milieu on the way to tumor cells. The scope of this investigation was to study the interaction products that originate from the treatment in water/methanol mixtures of representative phosphino Cu(I) compounds with an excess of individual amino acids (AAs) selected on the basis of the donor atom likely involved in metal coordination (i.e. O-glycine, S-methionine and N-histidine). These interactions have been investigated in electrospray ionization mass spectrometry (ESI-MS), mainly in the positive ion mode [ESI(+)MS], and the interaction products have been characterized by sequential collisional experiments, performed by an ion trap instrument. Histidine and methionine, but not glycine, were able to mine Cu(I) from [Cu(P)n]+ assemblies through the formation of mixed [CuI(P)(AA)]+ and eventually [CuI(AA)2]+ adducts. The ability to substitute phosphine(s) by AAs and the strongest affinity for Cu(I) was proved by the study of the energetics of collisional-induced decomposition (CID) reactions [CuI(P)(AA)]+ → CuI(AA) + P]+. Among the investigated AAs, histidine displayed the strongest affinity for Cu(I). Transchelation of Cu(I) was similarly observed when [Cu(P)n]+ species were treated with the model tripeptide GlyGlyHis (GGH), the most investigated member of the amino terminal Cu(II) and Ni(II) (ATCUN) peptide family. GGH was able to form robust metal adducts not only with Cu(II) and the related divalent Zn(II) and Ni(II) ions, but also with monovalent ions, including Cu(I) and Ag(I). CID pathways of [CuI(GGH)]+ and [AgI(GGH)]+ were qualitatively superimposable and proceeded through losses of neutral fragments. Similar losses of neutral fragments were observed from [ZnII(GGH)] and [NiII(GGH)]. CID pathways of [CuII(GGH)]-/+ adducts instead took place mainly through intramolecular electron-transfer reactions comprising the reduction of Cu(II) to Cu(I) and the formation of fragment radical cations.

An Atomistic Model Describing the Structure and Morphology of Cu-Doped C-S-H Hardening Accelerator Nanoparticles.

Calcium silicate hydrate (C-S-H) is the main binding phase in Portland cement. The addition of C-S-H nanoparticles as nucleation seeds has successfully been used to accelerate the hydration process and the precipitation of binding phases either in conventional Portland cement or in alternative binders. Indeed, the modulation of the hydration kinetics during the early-stage dissolution-precipitation reactions, by acting on the nucleation and growth of binding phases, improves the early strength development. The fine-tuning of concrete properties in terms of compressive strength and durability by designed structural modifications can be achieved through the detailed description of the reaction products at the atomic scale. The nano-sized, chemically complex and structurally disordered nature of these phases hamper their thorough structural characterization. To this aim, we implement a novel multi-scale approach by combining forefront small-angle X-ray scattering (SAXS) and synchrotron wide-angle X-ray total scattering (WAXTS) analyses for the characterization of Cu-doped C-S-H nanoparticles dispersed in a colloidal suspension, used as hardening accelerator. SAXS and WAXTS data were analyzed under a unified modeling approach by developing suitable atomistic models for C-S-H nanoparticles to be used to simulate the experimental X-ray scattering pattern through the Debye scattering equation. The optimization of atomistic models against the experimental pattern, together with complementary information on the structural local order from 29Si solid-state nuclear magnetic resonance and X-ray absorption spectroscopy, provided a comprehensive description of the structure, size and morphology of C-S-H nanoparticles from the atomic to the nanometer scale. C-S-H nanoparticles were modeled as an assembly of layers composed of 7-fold coordinated Ca atoms and decorated by silicate dimers and chains. The structural layers are a few tens of nanometers in length and width, with a crystal structure resembling that of a defective tobermorite, but lacking any ordering between stacking layers.

Novel Magnetic Inorganic Composites: Synthesis and Characterization.

The addition of magnetic particles to inorganic matrices can produce new composites exhibiting intriguing properties for practical applications. It has been previously reported that the addition of magnetite to concrete improves its mechanical properties and durability in terms of water and chloride ions absorption. Here we describe the preparation of novel magnetic geopolymers based on two different matrices (G1 without inert aggregates and G2 with inert quartz aggregates) containing commercial SrFe12O19 particles with two weight concentrations, 6% and 11%. The composites' characterization, including chemical, structural, morphological, and mechanical determinations together with magnetic and electrical measurements, was carried out. The magnetic study revealed that, on average, the SrFe12O19 magnetic particles can be relatively well dispersed in the inorganic matrix. A substantial increase in the composite samples' remanent magnetization was obtained by embedding in the geopolymer SrFe12O19 anisotropic particles at a high concentration under the action of an external magnetic field during the solidification process. The new composites exhibit good mechanical properties (as compressive strength), higher than those reported for high weight concretes bearing a similar content of magnetite. The impedance measurements indicate that the electrical resistance is mainly controlled by the matrix's chemical composition and can be used to evaluate the geopolymerization degree.

An 86Y-labeled mirror-image oligonucleotide: influence of Y-DOTA isomers on the biodistribution in rats.

A mirror-image oligonucleotide (L-RNA) was radiolabeled with the positron emitting radionuclide (86)Y (t(1/2) = 14.7 h) via the bifunctional chelator approach. DOTA-modification of the L-RNA (sequence: 5'-aminohexyl UGA CUG ACU GAC-3'; MW 3975) was performed using (S)-p-SCN-Bn-DOTA. (86)Y radiolabeling of the DOTA-L-RNA produced more than one species as evidenced by HPLC radiometric detection. For the identification of the (86)Y-labeled L-RNA, the structural analogue nonradioactive precursor [Y((S)-p-NH2-Bn-DOTA)](-) was synthesized. Two coordination isomers were separated via HPLC adopting the square antiprismatic (SAP) and the twisted square antiprismatic (TSAP) geometry, respectively. Their stereochemical configuration in the solution state was assessed by NMR and circular dichroism spectroscopy. Both [Y((S)-p-NH2-Bn-DOTA)](-) isomers were converted into isothiocyanate derivatives [Y((S)-p-SCN-Bn-DOTA)](-) and conjugated to the L-RNA. The identity of the [(86)Y-DOTA]-L-RNA species was finally established by comparison of the radiometric ((86)Y) and UV-visible chromatographic profiles. Biodistribution studies in Wistar rats showed minor changes in the biodistribution profile of the [(86)Y((S)-p-NH2-Bn-DOTA)](-) complex isomers, while no significant differences were observed for the [(86)Y-DOTA]-L-RNA isomers. High renal excretions were found for the [(86)Y((S)-p-NH 2-Bn-DOTA)](-) complex isomers as well as for the L-RNA isomers.

Extension of the 'Inorganic Gel Casting' Process to the Manufacturing of Boro-Alumino-Silicate Glass Foams.

A new technique for the production of glass foams, based on alkali activation and gel casting, previously applied to soda-lime glass, was successfully extended to boro-alumino-silicate glass, recovered from the recycling of pharmaceutical vials. A weak alkali activation (2.5 M NaOH or NaOH/KOH aqueous solutions) of fine glass powders (below 70 µm) allowed for the obtainment of well-dispersed concentrated aqueous suspensions, undergoing gelation by treatment at low temperature (75 °C). Unlike soda-lime glass, the progressive hardening could not be attributed to the formation of calcium-rich silicate hydrates. The gelation was provided considering the chemical formulation of pharmaceutical glass (CaO-free) to the formation of hydrated sodium alumino-silicate (N-A-S-H) gel. An extensive direct foaming was achieved by vigorous mechanical stirring of partially gelified suspensions, comprising also a surfactant. A sintering treatment at 700 °C, was finally applied to stabilize the cellular structures.

Transglutaminase-mediated conjugation and nitride-technetium-99m labelling of a bis(thiosemicarbazone) bifunctional chelator.

An assessment study involving the use of the transglutaminase (TGase) conjugation method and the nitride-technetium-99m labelling on a bis(thiosemicarbazone) (BTS) bifunctional chelating agent is presented. The previously described chelator diacetyl-2-(N4-methyl-3-thiosemicarbazone)-3-(N4-amino-3-thiosemicarbazone), H2ATSM/A, has been functionalized with 6-aminohexanoic acid (ε-Ahx) to generate the bifunctional chelating agent diacetyl-2-(N4-methyl-3-thiosemicarbazone)-3-[N4-(amino)-(6-aminohexanoic acid)-3-thiosemicarbazone], H2ATSM/A-ε-Ahx (1), suitable for conjugation to glutamine (Gln) residues of bioactive molecules via TGase. The feasibility of the TGase reaction in the synthesis of a bioconjugate derivative was investigated using Substance P (SP) as model peptide. Compounds 1 and H2ATSM/A-ε-Ahx-SP (2) were labelled with nitride-technetium-99m, obtaining the complexes [99mTc][Tc(N)(ATSM/A-ε-Ahx)] (99mTc1) and [99mTc][Tc(N)(ATSM/A-ε-Ahx-SP)] (99mTc2). The chemical identity of 99mTc1 and 99mTc2 was confirmed by radio/UV-RP-HPLC combined with ESI-MS analysis on the respective carrier-added products 99g/99mTc1 and 99g/99mTc2. The stability of the radiolabelled complexes after incubation in various environments was investigated. All the results were compared with those obtained for the corresponding 64Cu-analogues, 64Cu1 and 64Cu2. The TGase reaction allows the conjugation of 1 with the peptide, but it is not highly efficient due to instability of the chelator in the required conditions. The SP-conjugated complexes are unstable in mouse and human sera. However, indeed the BTS system can be exploited as nitride-technetium-99m chelator for highly efficient technetium labelling, thus making compound 1 worthy of further investigations for new targeted technetium and copper radiopharmaceuticals encompassing Single Photon Emission Computed Tomography and Positron Emission Tomography imaging.

Synthesis, X-ray Structure, and Solution NMR Studies of Ln(III) Complexes with a Macrocyclic Asymmetric Compartmental Schiff Base. Preference of the Ln(III) Ions for a Crown-Like Coordination Site.

The compartmental ligand H(2)L(A), containing an N(3)O(2) Schiff base and an O(2)O(3) crown like coordination site, has been prepared by reaction of 3,3'-(3-oxapentane-1,5-diyldioxy)bis(2-hydroxybenzaldehyde) with 1,5-diamino-3-azamethylpentane. The formation of a [1+1] macrocycle was inferred by IR, NMR, and mass spectrometry. When reacted with the rare-earth hydrate chlorides, LnCl(3).nH(2)O (Ln = La, Ce, Pr, Nd, Eu, Tb, Dy, Ho, Er, Tm, Yb, Lu, Y), H(2)L(A) or its precursors (template reaction) form the mononuclear complexes [Ln(H(2)L(A))(H(2)O)(4)]Cl(3).nH(2)O where the lanthanide ion coordinates the O(2)O(3) crown like site. The solid-state X-ray structures of [Ln(H(2)L(A))(H(2)O)(4)]Cl(3).nH(2)O (Ln = Ce, Dy, Lu) have been determined. [Lu(H(2)L(A))(H(2)O)(4)]Cl(3).3H(2)O is monoclinic space group P2(1)/n (Z = 4) with a = 15.269(5) Å, b = 11.484(5) Å, c = 19.389(6) Å, beta = 102.85(5) degrees; [Ce(H(2)L(A))(H(2)O)(4)]Cl(3).H(2)O and [Dy(H(2)L(A))(H(2)O)(4)]Cl(3).H(2)O are isomorphous, space group P2(1) (Z = 2), with a = 10.959(5) Å, b = 16.978(5) Å, c = 9.017(4) Å, beta = 97.73(5) degrees, and a = 10.874(5) Å, b = 16.797(5) Å, c = 9.046(4) Å, beta = 97.86(5) degrees for the cerium and dysprosium complexes, respectively. In the three compounds the metal ion is coordinated in a similar manner by the five oxygens (two phenolic and three etheric) of the cyclic ligand and the nine coordination around the central atom is reached by the oxygen atoms of four coordinated water molecules. Three chlorine ions are present in the asymmetric unit. A detailed (1)H NMR study was carried out in CD(3)OD for both the diamagnetic and paramagnetic [Ln(H(2)L(A))(H(2)O)(4)]Cl(3) complexes in order to compare their structure in solution with that found in the solid state. The quantitative analysis of the paramagnetic proton shifts indicates that the complexes from La to Tm are isostructural, maintain in solution the same type of coordination polyhedron found at the solid state, with the metal ion invariably coordinated in the O(2)O(3) compartment, and present a high degree of stereochemical nonrigidity. In the case of the Lu complex, the decreased fluxionality due to the reduced ionic radius allows the observation of two isomeric species in the (1)H NMR spectrum at low temperature.

Heterodinuclear Ln[bond]Na complexes with an asymmetrical macrocyclic compartmental Schiff base.

Heterodinuclear lanthanide(III)-sodium(I) complexes [LnNa(L)(Cl)(2)(CH(3)OH)] (Ln=La[bond]Nd, Sm[bond]Lu), where H(2)L is a [1+1] asymmetric compartmental macrocyclic ligand containing a N(3)O(2) Schiff base and a O(3)O(2) crown-ether-like coordination site, have been prepared and characterized by IR, (1)H, (13)C, and (23)Na NMR spectroscopy, mass spectrometry, and electron microscopy. In the solid state, the lanthanide(III) ions coordinate the Schiff-base N(3)O(2) site, and the sodium ion occupies the O(3)O(2) crownlike cavity, as shown by the X-ray crystal structures of the Nd, Eu, Gd, and Yb derivatives. In these complexes, the lanthanide(III) ion is coordinated by two chlorine atoms in the trans position and by three nitrogen and two negatively charged phenol oxygen atoms of the Schiff base, and the ion is heptacoordinated with a pentagonal bipyramidal geometry. The sodium ion is coordinated by three etheric oxygen atoms and the two phenolic oxygens that act as a bridge. A methanol molecule is also coordinated in the apical position of the resulting pentagonal pyramidal polyhedron. A detailed (1)H and (13)C NMR study was carried out in CD(3)OD for both diamagnetic and paramagnetic heterodinuclear complexes [LnNa(L)(Cl)(2)(CH(3)OH)]. The complexes are also isostructural in solution, and their structures parallel those found in the solid state. Moreover, some significative distances determined in the solid state and in solution are comparable. Finally, the potential use of these complexes as molecular probes for the selective recognition of specific metal ions has been tested. In particular, their ability to act as shift reagents and the selectivity of the O(3)O(2) site towards Li(+), Ca(2+), and K(+) were investigated by (23)Na NMR spectroscopy.