Catalytic Strategies for the Upcycling of Polyolefin Plastic Waste.

Chemical upgrading of waste plastics is currently one of the most important methods for addressing plastic pollution. In comparison to the current methods of incineration or landfill, chemical upgrading enables the utilization of carbon and hydrogen elements in waste plastics as resources. This process strongly relies on efficient catalysts and reaction systems. Through catalyst design, waste plastics can be converted into fuels or chemicals under the optimized reaction conditions, extending their life cycles. In this review, we systematically discuss various chemical conversion methods for polyolefin waste plastics, which account for a large proportion of waste plastics. We further explore the remaining challenges and future development trends in this field, including improving product value through product engineering and shifting research perspectives to exploring the tolerance of catalysts toward impurities in practical waste plastic waste rather than using pure plastic feedstock.

Occurrence of pathogenic Mycobacteria avium and Pseudomonas aeruginosa in outdoor decorative fountain water and the associated microbial community.

Outdoor decorative fountains usually attract residents to visit. However, opportunistic pathogens (OPs) can proliferate and grow in the stagnant fountain water, posing potential health risks to visitors due to the inhalation of spaying aerosols. In this study, the abundance of selected OPs and associated microbial communities in three large outdoor decorative fountain waters were investigated using quantitative PCR and 16S rRNA sequencing. The results indicated that Mycobacteria avium and Pseudomonas aeruginosa were consistently detected in all decorative fountain waters throughout the year. Redundancy analysis showed that OPs abundance was negatively correlated with water temperature but positively correlated with nutrient concentrations. The gene copy numbers of M. avium varied between 2.4 and 3.9 log10 (gene copies/mL), which were significantly lower than P. aeruginosa by several orders of magnitude, reaching 6.5-7.1 log10 (gene copies/mL) during winter. The analysis of taxonomic composition and prediction of functional potential also revealed pathogenic microorganisms and infectious disease metabolic pathways associated with microbial communities in different decorative fountain waters. This study provided a deeper understanding of the pathogenic conditions of the outdoor decorative fountain water, and future works should focus on accurately assessing the health risks posed by OPs in aerosols.

Spatiotemporal distribution of opportunistic pathogens and microbial community in centralized rural drinking water: One year survey in China.

Centralized water supply in rural areas, supported by small waterworks (small-central mode) and by municipal water treatment plants (urban-extension mode), is an important guarantee to implement the Rural Revitalization Strategy Plan (2018-2022) in China. Opportunistic pathogens (OPs) could not be evaluated by the national drinking water sanitation standards in China (GB 5749-2022), posing potential microbial risks in rural drinking water. In this study, the spatiotemporal distribution of OPs, microbial community and the associated functional composition under two central water supply modes were investigated by molecular approaches. The results indicated that OPs were widely presented in the rural drinking water regardless of water supply modes, and were more abundant than those in the urban tap water. The insufficient residual chlorine and higher turbidity triggered more microbial proliferation, posing a seasonal variation of OPs gene copy numbers and bacterial community compositions. In warm seasons of summer and autumn, the gene copies of E. coli, M. avium, Pseudomonas spp. and the amoeba host Acanthamoeba spp. achieved up to 4.92, 3.94, 6.75 and 3.74 log10 (gene copies/mL), respectively. Potential functional prediction indicated higher relative abundance of pathogenic genes and infectious risks associated with the rural drinking water under small-central water supply mode. This one-year survey of the spatiotemporal distribution of OPs and microbial community provided scientific insights into microbial safety of rural drinking water, prompting attention on small-central water supply mode against OPs risks.

Synergistic enhanced activation of peroxymonosulfate by heterojunction Co3O4-CuO@CN for removal of oxytetracycline: Performance, mechanism, and stability.

Metal-organic frameworks (MOFs) as precursors for catalysts has drawn growing attentions. In this study, heterojunction Co3O4-CuO doped carbon materials (noted as Co3O4-CuO@CN) were prepared by direct carbonization of CuCo-MOF in air. It was found that the Co3O4-CuO@CN-2 exhibited excellent catalytic activity with the highest Oxytetracycline (OTC) degradation rate of 0.0902 min-1 at 50 mg/L of Co3O4-CuO@CN-2 dosage, 2.0 mM of PMS and 20 mg/L of OTC, which was 4.25 and 4.96 times that of CuO@CN and Co3O4@CN, respectively. Furthermore, Co3O4-CuO@CN-2 was efficient over a wide pH range (pH 1.9-8.4), and possessed good stability and reusability without OTC degradation decrease after five consecutive uses at pH 7.0. In a comprehensive analysis, the rapid regeneration of Cu(II) and Co(II) is responsible for their excellent catalytic performance, and the p-p heterojunction structure formed between Co3O4 and CuO acts as an intermediary of electron transfer to accelerate PMS decomposition. Moreover, it was interesting to find that Cu rather than Co species played a vital role in the PMS activation. The quenching experiments and electron paramagnetic resonance demonstrated that .OH, SO4•-, and 1O2 were the reactive species responsible for oxidation of OTC and the non-radical pathway triggered by 1O2 was dominant.

Valorisation of food waste for valuable by-products generation with economic assessment.

This study assessed the techno-economic feasibility of a biorefinery for valuable by-products (mainly hydrogen, ethanol and fertilizer) generation from food waste. The plant was designed to be built in Zhejiang province (China) with a processing capacity of 100 t food waste per day. It was found that the total capital investment (TCI) and annual operation cost (AOC) of the plant were US$ 7625549 and US$ 2432290.7 year-1, respectively. After the tax, US$ 3141867.6 year-1 of net profit could be reached. The payback period (PBP) was 3.5 years at a 7% discount rate. The internal rate of return (IRR) and return on investment (ROI) were 45.54% and 43.88%, respectively. Shutdown condition could happen with the feed of food waste less than 7.84 t day-1 (2587.2 t year-1) for the plant. This work was beneficial for attracting interests and even investment for valuable by-products generation from food waste in large scale.

Recent advancements in iodide/phosphine-mediated photoredox radical reactions.

Photoredox catalysis plays a crucial role in contemporary synthetic organic chemistry. Since the groundbreaking work of Shang and Fu on photocatalytic decarboxylative alkylations in 2019, a wide range of organic transformations, such as alkylation, alkenylation, cyclization, amination, iodination, and monofluoromethylation, have been progressively achieved using a combination of iodide and PPh3. In this review, we primarily focus on summarizing the recent advancements in inexpensive and readily available iodide/phosphine-mediated photoredox radical transformations.

Effect of temperature on fermentative VFAs production from waste sludge stimulated by riboflavin and the shifts of microbial community.

Fermentative volatile fatty acids (VFAs) production from waste activated sludge (WAS) under moderate temperature is a promising way for resource and energy regeneration in municipal wastewater treatment plants (MWTPs). In this study, the effect of temperature on VFAs production and the associated microbial community from riboflavin-assisted WAS fermentation were investigated. Three fermentative reactors under 25, 35 and 55 °C were operated for 30 days, respectively. The results indicated that riboflavin enhanced VFAs production from WAS fermentation under moderate temperatures (25 °C, 35 °C), increasing conversion of organic matters to bioavailable substrates for the subsequent acidification process. Although a small dosage of riboflavin (1.0 ± 0.05 mM) hardly inhibited the methanogenic process, it could mediate the electron sink for VFAs under lower temperatures. This in turn increased the accumulation of acetic and propionic acids (up to 234 mg/g of volatile suspended solids) and their proportions relative to the total VFAs, being efficient electron donors and carbon sources for nutrient removal in MWTPs. Furthermore, microbial communities were shifted in response to temperature, and riboflavin stimulated the special fermentative bacteria under room temperature and mesophilic conditions. The study suggested a feasible and eco-friendly method to improve VFAs production from crude WAS at a relatively lower temperature.

Environmental distribution, transport and ecotoxicity of microplastics: A review.

Microplastics (MPs) have become a global environmental pollutant because of their unique properties. The extensive MP toxicity reports have focused on the aquatic environment, while the pervasive MP contamination in the soil and air has largely been overlooked. This review summarizes the abundance, sources and transport of MPs in different environments. It analyzes the toxicity of MPs based on various environmentally relevant bacterial, cellular, plant, aquatic animal and mammalian test groups, using both in vitro and in vivo experiments. The combined toxicity effects of MPs and various other environmental pollutants on ecosystems are also discussed. Currently, data on the adverse effects on combined MP toxicity are very limited. Thus, a systematic assessment of the environmental risk in different environments and in various species from MPs is challenging. Thus, this review proposes the possible risks and identifies the knowledge gaps posed by MPs to food safety and human health.

ZnO nanoparticles: recent advances in ecotoxicity and risk assessment.

The widespread application of zinc oxide nanoparticles (nano-ZnO) has received increasing attention because of their potential risks to human health and the environment. This review summarizes the relationship between the toxic effects and physicochemical properties of nano-ZnO and the underlying toxicity mechanisms of nano-ZnO. This study presents the possible human health hazards posed by nano-ZnO exposure and the biotoxicity to bacteria, algae, higher plants, aquatic animals, terrestrial invertebrates and vertebrates in vitro and in vivo. The advances in research on the ecotoxicity of nano-ZnO and the potential risks to human health are discussed. Finally, the current research deficiencies in this area are identified, and recommendations for future research are proposed.

Two-stage anaerobic process benefits removal for azo dye orange II with starch as primary co-substrate.

Two-stage anaerobic system (S1: R1 (acidogenic phase) + R2 (methanogenic phase)) and the one-stage control (S0) were established to investigate the effect of phase separation on the removal of an azo dye orange II, i.e., Acid Orange 7 (AO7), with starch as the primary co-substrate. Although final AO7 removal from two systems showed no statistical differences, the first-order rate constants for AO7 removal (kAO7-) and sulfanilic acid (SA) formation (kSA) were higher in S1. Kinetic analysis showed that kAO7- and kSA in S1 were 2.7-fold and 1.7-fold of those in S0, respectively, indicating the benefit of phase separation to the AO7 reduction. However, this benefit only appeared in the period with influent AO7 concentrations higher than 2.14 mM. Otherwise, this advantage would be hidden due to the longer HRT (5 d) and sufficient electron donor (1.0 g starch L-1). Within S1, R1 only contributed about 10% of the entire AO7 removal, and kAO7- in R1 (0.172 h-1) was much lower than in R2 (0.503 h-1). The methanogenic phase rather than acidogenic phase was the main contribution to AO7 removal, because the influent of R2 had more available electron donors and suitable pH condition (pH 6.5-7.0) for the bio-reduction process.

Comparative study on the pyrolysis kinetics of polyurethane foam from waste refrigerators.

Thermal treatment offers advantages of significant volume reduction and energy recovery for the polyurethane foam from waste refrigerators. In this work, the pyrolysis kinetics of polyurethane foam was investigated using the model-fitting, model-free and distributed activation energy model methods. The thermogravimetric analysis indicated that the polyurethane foam decomposition could be divided into three stages with temperatures of 38°C-400°C, 400°C-550°C and 550°C-1000°C. Peak temperatures for the major decomposition stage (<400°C) were determined as 324°C, 342°C and 344°C for heating rates of 5, 15 and 25 K min-1, respectively. The activation energy (Eα) from the Friedman, Flynn-Wall-Ozawa and Tang methods increased with degree of conversion (α) in the range of 0.05 to 0.5. The coefficients from the Flynn-Wall-Ozawa method were larger and the resulted Eα values fell into the range of 163.980-328.190 kJ mol-1 with an average of 206.099 kJ mol-1. For the Coats-Redfern method, the diffusion models offered higher coefficients, but the E values were smaller than that from the Flynn-Wall-Ozawa method. The Eα values derived from the distributed activation energy model method were determined as 163.536-334.231 kJ mol-1, with an average of 206.799 kJ mol-1. The peak of activation energy distribution curve was located at 205.929 kJ mol-1, consistent with the thermogravimetric results. The Flynn-Wall-Ozawa and distributed activation energy model methods were more reliable for describing the polyurethane foam pyrolysis process.

Kinetic modeling study on the combustion treatment of cathode from spent lithium-ion batteries.

Thermal treatment offers an alternative method for the separation of aluminum foil and cathode materials during spent lithium-ion batteries recycling. In this work, the combustion kinetic of cathode was studied based on six model-free (isoconversional) methods, namely Flynn-Wall-Ozawa (FWO), Friedman, Kissinger-Akahira-Sunose, Starink, Tang, and Boswell methods. The possible decomposition mechanism was also probed using a master-plots method (Criado method). Thermogravimetric analysis showed that the whole thermal process could be divided into three stages with temperatures of 37-578°C, 578-849°C, and 849-1000°C. The activation energy (Eα) derived from these model-free methods displayed the same trend, gradually increasing with a conversion range of 0.002-0.013, and significantly elevating beyond this range. The coefficients from the FWO method were larger, and the resulted Eα fell into the range of 10.992-40.298 kJ/mol with an average value of 20.228 kJ/mol. Comparing the theoretical master plots with an experimental curve, the thermal decomposition of cathode could be better described by the geometric contraction models.

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods.

In this work, the pyrolysis behavior of plastic waste-TV plastic shell-was investigated, based on thermogravimetric analysis and using a combination of model-fitting and model-free methods. The possible reaction mechanism and kinetic compensation effects were also examined. Thermogravimetric analysis indicated that the decomposition of plastic waste in a helium atmosphere can be divided into three stages: the minor loss stage (20-300°C), the major loss stage (300-500°C) and the stable loss stage (500-1000°C). The corresponding weight loss at three different heating rates of 15, 25 and 35 K/min were determined to be 2.80-3.02%, 94.45-95.11% and 0.04-0.16%, respectively. The activation energy (Ea) and correlation coefficient (R2) profiles revealed that the kinetic parameters calculated using the Friedman and Kissinger-Akahira-Sunose method displayed a similar trend. The values from the Flynn-Wall-Ozawa and Starink methods were comparable, although the former gave higher R2 values. The Eα values gradually decreased from 269.75 kJ/mol to 184.18 kJ/mol as the degree of conversion (α) increased from 0.1 to 0.8. Beyond this range, the Eα slightly increased to 211.31 kJ/mol. The model-fitting method of Coats-Redfern was used to predict the possible reaction mechanism, for which the first-order model resulted in higher R2 values than and comparable Eα values to those obtained from the Flynn-Wall-Ozawa method. The pre-exponential factors (lnA) were calculated based on the F1 reaction model and the Flynn-Wall-Ozawa method, and fell in the range 59.34-48.05. The study of the kinetic compensation effect confirmed that a compensation effect existed between Ea and lnA during the plastic waste pyrolysis.

Pyrolysis treatment of nonmetal fraction of waste printed circuit boards: Focusing on the fate of bromine.

Advanced thermal treatment of electronic waste offers advantages of volume reduction and energy recovery. In this work, the pyrolysis behaviour of nonmetallic fractions of waste printed circuit boards was studied. The fate of a bromine and thermal decomposition pathway of nonmetallic fractions of waste printed circuit boards were further probed. The thermogravimetric analysis showed that the temperatures of maximum mass loss were located at 319°C and 361°C, with mass loss of 29.6% and 50.6%, respectively. The Fourier transform infrared Spectroscopy analysis revealed that the spectra at temperatures of 300°C-400°C were complicated with larger absorbance intensity. The nonmetallic fractions of waste printed circuit boards decomposed drastically and more evolved products were detected in the temperature range of 600°C-1000°C. The gas chromatography-mass spectrometry analysis indicated that various brominated derivates were generated in addition to small molecules, such as CH4, H2O and CO. The release intensity of CH4 and H2O increased with temperature increasing and reached maximum at 600°C-800°C and 400°C-600°C. More bromoethane (C2H5Br) was formed as compared with HBr and methyl bromide (CH3Br). The release intensity of bromopropane (C3H7Br) and bromoacetone (C3H5BrO) were comparable, although smaller than that of bromopropene (C3H5Br). More dibromophenol (C6H4Br2O) was released than that of bromophenol (C6H5BrO) in the thermal treatment. During the thermal process, part of the ether bonds first ruptured forming bisphenol A, propyl alcohol and tetrabromobisphenol A. Then, the tetrabromobisphenol A decomposed into C6H5BrO and HBr, which further reacted with small molecules forming brominated derivates. It implied debromination of raw nonmetallic fractions of waste printed circuit boards or pyrolysis products should be applied for its environmentally sound treating.

Kinetic study on the slow pyrolysis of nonmetal fraction of waste printed circuit boards (NMF-WPCBs).

In this study, the pyrolysis behaviour of nonmetal fraction of waste printed circuit boards (NMF-WPCBs) was studied based on five model-free methods and distributed activation energy model (DAEM). The possible decomposition mechanism was further probed using the Criado method. Thermogravimetric analysis indicated that the NMF-WPCBs pyrolysis process could be divided into three stages with temperatures of 37-330°C, 330-380°C and 380-1000°C. The mass loss at different heating rate was determined as 26.85-29.98%, 13.47-24.21% and 20.43-23.36% for these stages, respectively. The activation energy (Eα) from various model-free methods first increased with degree of conversion (α) increasing from 0.05 to 0.275, and then decreased beyond this range. The coefficient (R) from the Flynn-Wall-Ozawa (FWO) method was higher, and the resulting Eα fell into the range of 214.947-565.660 kJ mol-1. For the DAEM method, the average Eα value was determined as 337.044 kJ mol-1, comparable with 329.664 kJ mol-1 from the FWO method. The thermal decomposition kinetics of NMF-WPCBs could be better described by the second-order reaction.

A review on silver nanoparticles-induced ecotoxicity and the underlying toxicity mechanisms.

Silver nanoparticles (Ag-NPs) are increasingly being applied in many consumer products due to their unique properties. Widespread use of Ag-NPs leads to an increasing human exposure to Ag-NPs in many different pathways. This review summarized the toxicity mechanisms of Ag-NPs based on various environmentally relevant test species, such as bacteria, cells, plants, aquatic animals and mammals, in both in vitro and in vivo experiments. Nanoparticles were usually exposed to combination chemicals but to single chemicals in the environment and thereby exert combined toxicities to the organisms. Therefore, the joint effects of nanomaterials and their co-existing characteristics were also discussed. The current knowledge gaps and safe product designs of Ag-NPs have been discussed in detail. The limited and existing data implied that understanding the toxicity mechanisms is crucial to the future research development of nanomaterials.

Parental transfer of perfluorooctane sulfonate and ZnO nanoparticles chronic co-exposure and inhibition of growth in F1 offspring.

Perfluorooctane sulfonate (PFOS) and ZnO nanoparticles (Nano-ZnO) are two kinds of environmental contaminants that have been frequently detected in natural waters. The potential joint toxicity of PFOS and nano-ZnO remains to be fully elucidated. The objective of this study was to evaluate co-exposure effects of PFOS and nano-ZnO on growth in initial generation (F0) zebrafish after chronic exposure and to examine possible parental transfer of PFOS and nano-ZnO transgenerational effects on the growth of first generation (F1) larvae. When zebrafish (2 h after incubation) were exposed to single- and co-exposure groups for 120 days, bioconcentration resulted in significantly less growth as measured by body length and body weight, higher mortality, and less spawning in the F0 generation. These effects were possibly due to the down-regulation of the expression of Vtg1 genes along with a sex hormone (T/E2) involved in the hypothalamus-pituitary-gonad (HPG) axis. Furthermore, after long-term exposure, less fertilization, less hatching, greater mortality and more malformation were found in the F1 generation. The down-regulation of genes and hormones might be responsible for transgenerational toxicity. This study suggested that chronic exposure to PFOS and nano-ZnO adversely impacts development, reproduction in the F0 generation, and offspring embryonic growth.

Finite Dilution Inverse Gas Chromatography as a Versatile Tool To Determine the Surface Properties of Biofillers for Plastic Composite Applications.

An improved understanding of a filler's surface properties is important for determining the most effective polymer reinforcement fillers. In this work, the surface characteristics of two biofillers, namely, clam shell modified by hydrochloric acid (AMF) and furfural (FMF), were investigated using inverse gas chromatography (IGC). The IGC results showed that the dispersive surface energy (γ(S)(D)) contributed the major part to the total surface energy for the biofillers. The values changed as a function of surface coverages, meaning that both samples were energetically fairly heterogeneous. The γ(S)(D) calculated with the Dorris­Gray method was larger than that calculated with the Schultz method, with a γ(S,Dorris­Gray)(D)/γ(S,Schultz)(D) ratio of 1.10. Compared to AMF, FMF possessed higher γ(S)(D) value; however, this difference was compensated by specific (acid­base) surface energy (γ(S)(AB)). Both samples predominantly interacted with ethanol and acetonitrile, implying an amphoteric nature of the material surfaces. Gutmann acid and base number profiles indicated that the surfaces of both samples were more basic in nature. The FMF showed a lower total work of cohesion (W(Coh)(total)) value compared to the AMF, which could lead to an increase in composite performance.

Henna plant biomass enhanced azo dye removal: Operating performance, microbial community and machine learning modeling.

The bio-reduction of azo dyes is significantly dependent on the availability of electron donors and external redox mediators. In this study, the natural henna plant biomass was supplemented to promote the biological reduction of an azo dye of Acid Orange 7 (AO7). Besides, the machine learning (ML) approach was applied to decipher the intricate process of henna-assisted azo dye removal. The experimental results indicated that the hydrolysis and fermentation of henna plant biomass provided both electron donors such as volatile fatty acid (VFA) and redox mediator of lawsone to drive the bio-reduction of AO7 to sulfanilic acid (SA). The high henna dosage selectively enriched certain bacteria, such as Firmicutes phylum, Levilinea and Paludibacter genera, functioning in both the henna fermentation and AO7 reduction processes simultaneously. Among the three tested ML algorithms, eXtreme Gradient Boosting (XGBoost) presented exceptional accuracy and generalization ability in predicting the effluent AO7 concentrations with pH, oxidation-reduction potential (ORP), soluble chemical oxygen demand (SCOD), VFA, lawsone, henna dosage, and cumulative henna as input variables. The validating experiments with tailored optimal operating conditions and henna dosage (pH 7.5, henna dosage of 2 g/L, and cumulative henna of 14 g/L) confirmed that XGBoost was an effective ML model to predict the efficient AO7 removal (91.6%), with a negligible calculating error of 3.95%. Overall, henna plant biomass addition was a cost-effective and robust method to improve the bio-reduction of AO7, which had been demonstrated by long-term operation, ML modeling, and experimental validation.

The Research Status, Potential Hazards and Toxicological Mechanisms of Fluoroquinolone Antibiotics in the Environment.

Fluoroquinolone antibiotics are widely used in human and veterinary medicine and are ubiquitous in the environment worldwide. This paper recapitulates the occurrence, fate, and ecotoxicity of fluoroquinolone antibiotics in various environmental media. The toxicity effect is reviewed based on in vitro and in vivo experiments referring to many organisms, such as microorganisms, cells, higher plants, and land and aquatic animals. Furthermore, a comparison of the various toxicology mechanisms of fluoroquinolone antibiotic residues on environmental organisms is made. This study identifies gaps in the investigation of the toxic effects of fluoroquinolone antibiotics and mixtures of multiple fluoroquinolone antibiotics on target and nontarget organisms. The study of the process of natural transformation toward drug-resistant bacteria is also recognized as a knowledge gap. This review also details the combined toxicity effect of fluoroquinolone antibiotics and other chemicals on organisms and the adsorption capacity in various environmental matrices, and the scarcity of data on the ecological toxicology evaluation system of fluoroquinolone antibiotics is identified. The present study entails a critical review of the literature providing guidelines for the government to control the discharge of pollutants into the environment and formulate policy coordination. Future study work should focus on developing a standardized research methodology for fluoroquinolone antibiotics to guide enterprises in the design and production of drugs with high environmental biocompatibility.