Evaluation of PEG-b-polycarbonates self-assemblies containing azobenzene or coumarin moieties as nanocarriers using paclitaxel as a model hydrophobic drug.

The work assesses the performance of nanocarriers from amphiphilic block copolymers with functional azobenzene or coumarin moieties for delivery of paclitaxel. Placlitaxel was encapsulated by the nanoprecipitation method. Characterisations were performed by DLS, TEM, Zeta potential and HPLC. Cell viability was investigated in HeLa and Huh-5-2-cell lines. Coumarin-containing polymeric micelles (Dh = 26 ± 2 nm, PDI = 0.28, ζ = ‒22.9 ± 3.6 mV) with 11.2 ± 0.5%w/w drug loading showed enhanced cytotoxicity in HeLa cells (IC50 < 0.02 nM) compared to free paclitaxel (IC50 = 0.17 ± 0.02 nM). Azobenzene-containing polymeric vesicles (Dh = 390 ± 20 nm, PDI = 0.24, ζ = ‒33.2 ± 5.0 mV) with a 6.8 ± 0.4%w/w drug loading showed increased cytotoxicity under 530 nm light (IC50 = 0.0114 ± 0.00033 nM) in HeLa cells due to a stimulated delivery of paclitaxel. Effectivity of these block copolymers as paclitaxel nanovectors and light stimulated release has been demonstrated.

Interplay between non-covalent interactions in 1D supramolecular polymers based on 1,4-bis(iodoethynyl)benzene.

A study of the solution-phase, solid-state structures of halogen-bonded co-crystals of 1,4-bis(iodoethynyl)benzene (p-BIB) with three salts, namely, decyltrimethylammonium bromide (DTMABr), tetrapropylammonium bromide (TPABr), and tetrabutylammonium bromide (TBABr), has been carried out, along with theoretical calculations. Isothermal titration calorimetry (ITC) showed that the binding constant of bromide with p-BIB in THF is not strongly dependent on the cation, and that the entropic term clearly dominates the enthalpic one in the free energy of binding. In the three crystal structures, the bromide anion acts as a doubly connected node for halogen bonding interactions, which results in linear or angular open chains. The intrachain angles (IBr-I) of the 1D supramolecular polymers based on p-BIB depend on the geometry and size of the cation and vary from 180° for DMTABr to 75° for TBABr. Non-covalent interaction (NCI) analysis of selected motifs and optimized crystals demonstrates that the balance between halogen bonds, hydrogen bonds, and van der Waals interactions, especially type-I halogenhalogen contacts, determines the crystal structures.

Chiral supramolecular organization from a sheet-like achiral gel: a study of chiral photoinduction.

Chiral photoinduction in a photoresponsive gel based on an achiral 2D architecture with high geometric anisotropy and low roughness has been investigated. Circularly polarized light (CPL) was used as a chiral source and an azobenzene chromophore was employed as a chiral trigger. The chiral photoinduction was studied by evaluating the preferential excitation of enantiomeric conformers of the azobenzene units. Crystallographic data and density functional theory (DFT) calculations show how chirality is transferred to the achiral azomaterials as a result of the combination of chiral photochemistry and supramolecular interactions. This procedure could be applied to predict and estimate chirality transfer from a chiral physical source to a supramolecular organization using different light-responsive units.

A bifunctional amorphous polymer exhibiting equal linear and circular photoinduced birefringences.

The large and reversible photoinduced linear and circular birefringences in azo-compounds are at the basis of the interest in these materials, which are potentially useful for several applications. Since the onset of the linear and circular anisotropies relies on orientational processes, which typically occur on the molecular and supramolecular length scale, respectively, a circular birefringence at least one order of magnitude lower than the linear one is usually observed. Here, the synthesis and characterization of an amorphous polymer with a dimeric repeating unit containing a cyanoazobenzene and a cyanobiphenyl moiety are reported, in which identical optical linear and circular birefringences are induced for proper light dose and ellipticity. A pump-probe technique and an analytical method based on the Stokes-Mueller formalism are used to investigate the photoinduced effects and to evaluate the anisotropies. The peculiar photoresponse of the polymer makes it a good candidate for applications in smart functional devices.

Nonlinear optical thin film device from a chiral octopolar phenylacetylene liquid crystal.

A set of chiral discotic phenylacetylenes have been synthesized by 3-fold Sonogashira coupling between different ethynylbenzenes and triiodobenzenes. The resultant bulk materials are fully characterized by polarized optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray diffraction. The octopolar nature of the target compounds is studied by UV-vis absorption spectroscopy and hyper-Raleigh scattering in solution. Optimization of the donor-acceptor substitution yields both high hyperpolarizability values and appreciable mesomorphic properties. A simple thin film device for second harmonic generation has been prepared from the nitro-substituted liquid crystalline derivative.

Crystallization of an achiral cyclohexanone ethylene ketal in enantiomorphs and determination of the absolute structure.

The achiral 4-methoxy-4-(p-methoxyphenyl)-cyclohexanone ethylene ketal (1) resolves spontaneously. The crystal structure is solved in chiral spatial group P2(1). Because compound 1 is composed of only light atoms (C, H, O) it is not possible to determine its absolute structure configuration. An efficient procedure for the absolute structure configuration determination of flexible molecules containing only light atoms is proposed, based on the combination of X-ray diffraction, solid-state VCD, and DFT calculations.

Polymeric Self-Assemblies Based on tetra-ortho-Substituted Azobenzene as Visible Light Responsive Nanocarriers.

Most of reported polymeric light-responsive nanocarriers make use of UV light to trigger morphological changes and the subsequent release of encapsulated cargoes. Moving from UV- to visible-responsive units is interesting for the potential biomedical applications of these materials. Herein we report the synthesis by ring opening polymerization (ROP) of a series of amphiphilic diblock copolymers, into which either UV or visible responsive azobenzenes have been introduced via copper(I) catalyzed azide-alkyne cycloaddition (CuAAC). These copolymers are able to self-assemble into spherical micelles or vesicles when dispersed in water. The study of the response of the self-assemblies upon UV (365 nm) or visible (530 or 625 nm) light irradiation has been studied by Transmission Electron Microscopy (TEM), Cryogenic Transmission Electron Microscopy (Cryo-TEM), and Dynamic Light Scattering (DLS) studies. Encapsulation of Nile Red, in micelles and vesicles, and Rhodamine B, in vesicles, and its light-stimulated release has been studied by fluorescence spectroscopy and confocal microscopy. Appreciable morphological changes have been induced with green light, and the subsequent release of encapsulated cargoes upon green light irradiation has been confirmed.

Strategies to Stabilize the Photoinduced Supramolecular Chirality in Azobenzene Liquid Crystalline Polymers.

This paper describes the synthesis, thermal characterization and optical properties of liquid crystalline homopolymers and block copolymers with a repeating unit consisting of two functional units, with at least one of them being an azobenzene. Films of these polymers have been irradiated with circularly polarized light at room temperature, evaluating the intensity of the photoinduced chiral signal and its temporal stability upon storage. The paper also explores two different strategies to restrict the relaxation of the photoinduced order. Firstly, block copolymers have been prepared to confine the photoaddressable segments into nanoscopic domains where relaxation should be restricted. Secondly, an alternative homopolymer has been synthesized where the repeating unit combines two chromophores that can be separately photoaddressed, an azobenzene unit to efficiently photoinduce chirality and a cinnamate to fix the chiral signal by photocrosslinking.

Supramolecular chirality and reversible chiroptical switching in new chiral liquid-crystal azopolymers.

The synthesis of chiral liquid-crystalline polymers of well-controlled structure (linear and three-armed star-shaped) with distinct average chain lengths and low polydispersity was achieved by atom transfer radical polymerisation (ATRP) of a new optically active monomer (S)-4-[6-(2-methacryloyloxypropanoyloxy)hexyloxy)]-4'-ethoxyazobenzene [(S)-ML6A], containing the L-lactic residue of one absolute configuration in the side-chain. All the obtained polymeric samples, characterised by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and polarised optical microscopy (POM), exhibit a smectic A(1/2) (fully interdigitated) liquid-crystalline phase and high cleaning points, with transition temperatures dependent on the average polymerisation degree and the macromolecular structure. The chirality originated at the molecular level by the asymmetric functionality of the L-lactic acid residue provides the polymers, in the smectic phase, of highly homogeneous conformations with a prevailing chirality related to the presence of H-aggregates having conformational dissymmetry of one prevailing screw-sense. By irradiating with circularly polarised light (CPL), it is possible to photomodulate the chiroptical properties of these intrinsically chiral polymeric thin films. Upon irradiation with left-handed CPL (l-CPL), the circular dichroism (CD) spectra of the films show enhancement of ellipticity and a net inversion of sign. The effect is reversible and the mirror image of the CD spectrum can be restored by pumping with right-handed CPL radiation (r-CPL). The results show the ability of l-CPL to invert the supramolecular chirality of the materials and demonstrate the essential role of azoaromatic aggregates.