Molecular-Level Insight into the Chlorofluorocarbons Adsorption by Defective Covalent Organic Polymers.

Halocarbons have important industrial applications, but because of their contribution to global warming and the fact that they can cause ozone depletion, they are considered highly toxic. Hence, the techniques that can capture and recover the used halocarbons with energy-efficient methods have been recently received greater attention. In this contribution, we report the capture of dichlorodifluoromethane (R12), which has high global warming and ozone depletion potential, using covalent organic polymers (COPs). The defect-engineered COPs were synthesized and demonstrated outstanding sorption capacities, ~226 wt % of R12 combined with linear-shaped adsorption isotherms. We further identified the plausible microscopic adsorption mechanism of the investigated COPs via grand canonical Monte Carlo simulations applied to non-defective and a collection of atomistic models of the defective COPs. The modeling work suggests that significant R12 adsorption performance is attributed to a gradual increment of porosities due to isolated/interconnected micro-/meso-pore channels and the change of the long-range ordering of both COPs. The successive hierarchical-pore-filling mechanism promotes R12 molecular adsorption via moderate van der Waals adsorbate-adsorbent interactions in the micropores of both COPs at low pressure followed by adsorbate-adsorbate interactions in the extra-voids created at moderate to high pressure ranges. This continuous pore-filling mechanism makes defective COPs as promising sorbents for halocarbon adsorption.

High-Performance Porous Organic Polymers for Environmental Remediation of Toxic Gases.

Sulfur dioxide (SO2) is a harmful acidic gas generated from power plants and fossil fuel combustion and represents a significant health risk and threat to the environment. Benzimidazole-linked polymers (BILPs) have emerged as a promising class of porous solid adsorbents for toxic gases because of their chemical and thermal stability as well as the chemical nature of the imidazole moiety. The performance of BILPs in SO2 capture was examined by synergistic experimental and theoretical studies. BILPs exhibit a significantly high SO2 uptake of up to 8.5 mmol g-1 at 298 K and 1.0 bar. The density functional theory (DFT) calculations predict that this high SO2 uptake is due to the dipole-dipole interactions between SO2 and the functionalized polymer frames through O2S(δ+)···N(δ-)-imine and O═S═O(δ-)···H(δ+)-aryl and intermolecular attraction between SO2 molecules (O═S═O(δ-)···S(δ+)O2). Moderate isosteric heats of adsorption (Qst ≈ 38 kJ mol-1) obtained from experimental SO2 uptake studies are well supported by the DFT calculations (≈40 kJ mol-1), which suggests physisorption processes enabling rapid adsorbent regeneration for reuse. Repeated adsorption experiments with almost identical SO2 uptake confirm the easy regeneration and robustness of BILPs. Moreover, BILPs possess very high SO2 adsorption selectivity at low concentration over carbon dioxide (CO2), methane (CH4), and nitrogen (N2): SO2/CO2, 19-24; SO2/CH4, 118-113; SO2/N2, 600-674. This study highlights the potential of BILPs in the desulfurization of flue gas or other gas mixtures through capturing trace levels of SO2.

PoreMatMod.jl: Julia Package for in Silico Postsynthetic Modification of Crystal Structure Models.

PoreMatMod.jl is a free, open-source, user-friendly, and documented Julia package for modifying crystal structure models of porous materials such as metal-organic frameworks (MOFs). PoreMatMod.jl functions as a find-and-replace algorithm on crystal structures by leveraging (i) Ullmann's algorithm to search for subgraphs of the crystal structure graph that are isomorphic to the graph of a query fragment and (ii) the orthogonal Procrustes algorithm to align a replacement fragment with a targeted substructure of the crystal structure for installation. The prominent application of PoreMatMod.jl is to generate libraries of hypothetical structures for virtual screenings. For example, one can install functional groups on the linkers of a parent MOF, mimicking postsynthetic modification. Other applications of PoreMatMod.jl to modify crystal structure models include introducing defects with precision and correcting artifacts of X-ray structure determination (adding missing hydrogen atoms, resolving disorder, and removing guest molecules). The find-and-replace operations implemented by PoreMatMod.jl can be applied broadly to diverse atomistic systems for various in silico structural modification tasks.

Self-Adjusting Metal-Organic Framework for Efficient Capture of Trace Xenon and Krypton.

The capture of the xenon and krypton from nuclear reprocessing off-gas is essential to the treatment of radioactive waste. Although various porous materials have been employed to capture Xe and Kr, the development of high-performance adsorbents capable of trapping Xe/Kr at very low partial pressure as in the nuclear reprocessing off-gas conditions remains challenging. Herein, we report a self-adjusting metal-organic framework based on multiple weak binding interactions to capture trace Xe and Kr from the nuclear reprocessing off-gas. The self-adjusting behavior of ATC-Cu and its mechanism have been visualized by the in-situ single-crystal X-ray diffraction studies and theoretical calculations. The self-adjusting behavior endows ATC-Cu unprecedented uptake capacities of 2.65 and 0.52 mmol g-1 for Xe and Kr respectively at 0.1 bar and 298 K, as well as the record Xe capture capability from the nuclear reprocessing off-gas. Our work not only provides a benchmark Xe adsorbent but proposes a new route to construct smart materials for efficient separations.

Molecular Intermediate in the Directed Formation of a Zeolitic Metal-Organic Framework.

Directed synthesis promises control over architecture and function of framework materials. In practice, however, designing such syntheses requires a detailed understanding of the multistep pathways of framework formations, which remain elusive. By identifying intermediate coordination complexes, this study provides insights into the complex role of a structure-directing agent (SDA) in the synthetic realization of a promising material. Specifically, a novel molecular intermediate was observed in the formation of an indium zeolitic metal-organic framework (ZMOF) with a sodalite topology. The role of the imidazole SDA was revealed by time-resolved in situ powder X-ray diffraction (XRD) and small-angle X-ray scattering (SAXS).

An Ultra-Microporous Metal-Organic Framework with Exceptional Xe Capacity.

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal-organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni-MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO2 . Further 129 Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.

Isoreticular Expansion of Metal-Organic Frameworks via Pillaring of Metal Templated Tunable Building Layers: Hydrogen Storage and Selective CO2 Capture.

The deliberate construction of isoreticular eea-metal-organic frameworks (MOFs) (Cu-eea-1, Cu-eea-2 and Cu-eea-3) and rtl-MOFs (Co-rtl-1 and Co-rtl-2) has been accomplished based on the ligand-to-axial pillaring of supermolecular building layers. The use of different metal ions resulted in two types of supermolecular building layers (SBLs): Kagome (kgm) and square lattices (sql) which further interconnect to form anticipated 3D-MOFs. The isoreticular expansion of (3,6)-connected Cu-MOFs has been achieved with desired eea-topology based on kgm building layers. In addition, two (3,6)-connected Co-rtl-MOFs were also successfully constructed based on sql building layers. The Cu-eea-MOFs were shown to act as hydrogen storage materials with appreciable amount of hydrogen uptake abilities. Moreover Cu-eea-MOFs have also exhibited remarkable CO2 capture ability at ambient condition compared to nitrogen and methane, due to the presence of amide functionalities.

Direct Observation of Li+ Ions Trapped in a Mg2+-Templated Metal-Organic Framework.

Herein we report the first example of a metal-organic framework (MOF) in which the location of Li+ ions trapped in the porous confinement can be unambiguously defined by single-crystal X-ray diffraction. Furthermore, the Li+-doped MOF shows significant enhancement in gas uptake as well as selective adsorption of CO2 over CH4.

Reaction Environment Modification in Covalent Organic Frameworks for Catalytic Performance Enhancement.

Herein, we show how the spatial environment in the functional pores of covalent organic frameworks (COFs) can be manipulated in order to exert control in catalysis. The underlying mechanism of this strategy relies on the placement of linear polymers in the pore channels that are anchored with catalytic species, analogous to outer-sphere residue cooperativity within the active sites of enzymes. This approach benefits from the flexibility and enriched concentration of the functional moieties on the linear polymers, enabling the desired reaction environment in close proximity to the active sites, thereby impacting the reaction outcomes. Specifically, in the representative dehydration of fructose to produce 5-hydroxymethylfurfural, dramatic activity and selectivity improvements have been achieved for the active center of sulfonic acid groups in COFs after encapsulation of polymeric solvent analogues 1-methyl-2-pyrrolidinone and ionic liquid.

Reduced Magnetism in Core-Shell Magnetite@MOF Composites.

The magnetic susceptibility of synthesized magnetite (Fe3O4) microspheres was found to decline after the growth of a metal-organic framework (MOF) shell on the magnetite core. Detailed structural analysis of the core-shell particles using scanning electron microscopy, transmission electron microscopy, atom probe tomography, and57Fe-Mössbauer spectroscopy suggests that the distribution of MOF precursors inside the magnetic core resulted in the oxidation of the iron oxide core.

Ultralow Parasitic Energy for Postcombustion CO2 Capture Realized in a Nickel Isonicotinate Metal-Organic Framework with Excellent Moisture Stability.

Metal-organic frameworks (MOFs) have attracted significant attention as solid sorbents in gas separation processes for low-energy postcombustion CO2 capture. The parasitic energy (PE) has been put forward as a holistic parameter that measures how energy efficient (and therefore cost-effective) the CO2 capture process will be using the material. In this work, we present a nickel isonicotinate based ultramicroporous MOF, 1 [Ni-(4PyC)2·DMF], that has the lowest PE for postcombustion CO2 capture reported to date. We calculate a PE of 655 kJ/kg CO2, which is lower than that of the best performing material previously reported, Mg-MOF-74. Further, 1 exhibits exceptional hydrolytic stability with the CO2 adsorption isotherm being unchanged following 7 days of steam-treatment (>85% RH) or 6 months of exposure to the atmosphere. The diffusion coefficient of CO2 in 1 is also 2 orders of magnitude higher than in zeolites currently used in industrial scrubbers. Breakthrough experiments show that 1 only loses 7% of its maximum CO2 capacity under humid conditions.

Xenon Recovery at Room Temperature using Metal-Organic Frameworks.

Xenon is known to be a very efficient anesthetic gas, but its cost prohibits the wider use in medical industry and other potential applications. It has been shown that Xe recovery and recycling from anesthetic gas mixtures can significantly reduce its cost as anesthetic. The current technology uses series of adsorbent columns followed by low-temperature distillation to recover Xe; this method is expensive to use in medical facilities. Herein, we propose a much simpler and more efficient system to recover and recycle Xe from exhaled anesthetic gas mixtures at room temperature using metal-organic frameworks (MOFs). Among the MOFs tested, PCN-12 exhibits unprecedented performance with high Xe capacity and Xe/O2 , Xe/N2 and Xe/CO2 selectivity at room temperature. The in situ synchrotron measurements suggest that Xe is occupies the small pockets of PCN-12 compared to unsaturated metal centers (UMCs). Computational modeling of adsorption further supports our experimental observation of Xe binding sites in PCN-12.

Removal of TcO4(-) ions from solution: materials and future outlook.

Technetium mainly forms during artificial nuclear fission; it exists primarily as TcO4(-) in nuclear waste, and it is among the most hazardous radiation-derived contaminants because of its long half-life (t1/2 = 2.13 × 10(5) years) and environmental mobility. The high water solubility of TcO4(-) (11.3 mol L(-1) at 20 °C) and its ability to readily migrate within the upper layer of the Earth's crust make it particularly hazardous. Several types of materials, namely resins, molecular complexes, layered double hydroxides, and pure inorganic and metal-organic materials, have been shown to be capable of capturing TcO4(-) (or other oxoanions) from solution. In this review, we give a brief description about the types of materials that have been used to capture TcO4(-) and closely related oxyanions so far and discuss the possibility of using metal-organic frameworks (MOFs) as next-generation ion-exchange materials for the stated application. In particular, with the advent of ultra-stable MOF materials, in conjunction with their chemical tunability, MOFs can be applied to capture these oxyanions under real-life conditions.

Kr/Xe Separation over a Chabazite Zeolite Membrane.

Herein we demonstrate that chabazite zeolite SAPO-34 membranes effectively separated Kr/Xe gas mixtures at industrially relevant compositions. Control over membrane thickness and average crystal size led to industrial range permeances and high separation selectivities. Specifically, SAPO-34 membranes can separate Kr/Xe mixtures with Kr permeances as high as 1.2 × 10 (-7) mol/m(2) s Pa and separation selectivities of 35 for molar compositions close to typical concentrations of these two gases in air. In addition, SAPO-34 membranes separated Kr/Xe mixtures with Kr permeances as high as 1.2 × 10 (-7) mol/m(2) s Pa and separation selectivities up to 45 for molar compositions as might be encountered in nuclear reprocessing technologies. Molecular sieving and differences in diffusivities were identified as the dominant separation mechanisms.

Potential of metal-organic frameworks for separation of xenon and krypton.

CONSPECTUS: The total world energy demand is predicted to rise significantly over the next few decades, primarily driven by the continuous growth of the developing world. With rapid depletion of nonrenewable traditional fossil fuels, which currently account for almost 86% of the worldwide energy output, the search for viable alternative energy resources is becoming more important from a national security and economic development standpoint. Nuclear energy, an emission-free, high-energy-density source produced by means of controlled nuclear fission, is often considered as a clean, affordable alternative to fossil fuel. However, the successful installation of an efficient and economically viable industrial-scale process to properly sequester and mitigate the nuclear-fission-related, highly radioactive waste (e.g., used nuclear fuel (UNF)) is a prerequisite for any further development of nuclear energy in the near future. Reprocessing of UNF is often considered to be a logical way to minimize the volume of high-level radioactive waste, though the generation of volatile radionuclides during reprocessing raises a significant engineering challenge for its successful implementation. The volatile radionuclides include but are not limited to noble gases (predominately isotopes of Xe and Kr) and must be captured during the process to avoid being released into the environment. Currently, energy-intensive cryogenic distillation is the primary means to capture and separate radioactive noble gas isotopes during UNF reprocessing. A similar cryogenic process is implemented during commercial production of noble gases though removal from air. In light of their high commercial values, particularly in lighting and medical industries, and associated high production costs, alternate approaches for Xe/Kr capture and storage are of contemporary research interest. The proposed pathways for Xe/Kr removal and capture can essentially be divided in two categories: selective absorption by dissolution in solvents and physisorption on porous materials. Physisorption-based separation and adsorption on highly functional porous materials are promising alternatives to the energy-intensive cryogenic distillation process, where the adsorbents are characterized by high surface areas and thus high removal capacities and often can be chemically fine-tuned to enhance the adsorbate-adsorbent interactions for optimum selectivity. Several traditional porous adsorbents such as zeolites and activated carbon have been tested for noble gas capture but have shown low capacity, selectivity, and lack of modularity. Metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) are an emerging class of solid-state adsorbents that can be tailor-made for applications ranging from gas adsorption and separation to catalysis and sensing. Herein we give a concise summary of the background and development of Xe/Kr separation technologies with a focus on UNF reprocessing and the prospects of MOF-based adsorbents for that particular application.

Noria: A Highly Xe-Selective Nanoporous Organic Solid.

Separation of xenon and krypton is of industrial and environmental concern; the existing technologies use cryogenic distillation. Thus, a cost-effective, alternative technology for the separation of Xe and Kr and their capture from air is of significant importance. Herein, we report the selective Xe uptake in a crystalline porous organic oligomeric molecule, noria, and its structural analogue, PgC-noria, under ambient conditions. The selectivity of noria towards Xe arises from its tailored pore size and small cavities, which allows a directed non-bonding interaction of Xe atoms with a large number of carbon atoms of the noria molecular wheel in a confined space.

Removal of Pertechnetate-Related Oxyanions from Solution Using Functionalized Hierarchical Porous Frameworks.

Efficient and cost-effective removal of radioactive pertechnetate anions from nuclear waste is a key challenge to mitigate long-term nuclear waste storage issues. Traditional materials such as resins and layered double hydroxides (LDHs) were evaluated for their pertechnetate or perrhenate (the non-radioactive surrogate) removal capacity, but there is room for improvement in terms of capacity, selectivity and kinetics. A series of functionalized hierarchical porous frameworks were evaluated for their perrhenate removal capacity in the presence of other competing anions.

Zirconium-Based Metal-Organic Framework for Removal of Perrhenate from Water.

The efficient removal of pertechnetate (TcO4(-)) anions from liquid waste or melter off-gas solution for an alternative treatment is one of the promising options to manage (99)Tc in legacy nuclear waste. Safe immobilization of (99)Tc is of major importance because of its long half-life (t1/2 = 2.13 × 10(5) yrs) and environmental mobility. Different types of inorganic and solid-state ion-exchange materials have been shown to absorb TcO4(-) anions from water. However, both high capacity and selectivity have yet to be achieved in a single material. Herein, we show that a protonated version of an ultrastable zirconium-based metal-organic framework can adsorb perrhenate (ReO4(-)) anions, a nonradioactive surrogate for TcO4(-), from water even in the presence of other common anions. Synchrotron-based powder X-ray diffraction and molecular simulations were used to identify the position of the adsorbed ReO4(-) (surrogate for TcO4(-)) molecule within the framework.

Selective CO2 Adsorption in a Supramolecular Organic Framework.

Considering the rapidly rising CO2 level, there is a constant need for versatile materials which can selectively adsorb CO2 at low cost. The quest for efficient sorptive materials is still on since the practical applications of conventional porous materials possess certain limitations. In that context, we designed, synthesized, and characterized two novel supramolecular organic frameworks based on C-pentylpyrogallol[4]arene (PgC5 ) with spacer molecules, such as 4,4'-bipyridine (bpy). Highly optimized and symmetric intermolecular hydrogen-bonding interactions between the main building blocks and comparatively weak van der Waals interactions between solvent molecules and PgC5 leads to the formation of robust extended frameworks, which withstand solvent evacuation from the crystal lattice. The evacuated framework shows excellent affinity for carbon dioxide over nitrogen and adsorbs ca. 3 wt % of CO2 at ambient temperature and pressure.

Hybrid Ultra-Microporous Materials for Selective Xenon Adsorption and Separation.

The demand for Xe/Kr separation continues to grow due to the industrial significance of high-purity Xe gas. Current separation processes rely on energy intensive cryogenic distillation. Therefore, less energy intensive alternatives, such as physisorptive separation, using porous materials, are required. Herein we show that an underexplored class of porous materials called hybrid ultra-microporous materials (HUMs) affords new benchmark selectivity for Xe separation from Xe/Kr mixtures. The isostructural materials, CROFOUR-1-Ni and CROFOUR-2-Ni, are coordination networks that have coordinatively saturated metal centers and two distinct types of micropores, one of which is lined by CrO4 (2-) (CROFOUR) anions and the other is decorated by the functionalized organic linker. These nets offer unprecedented selectivity towards Xe. Modelling indicates that the selectivity of these nets is tailored by synergy between the pore size and the strong electrostatics afforded by the CrO4 (2-) anions.