Slit and Receptor Tyrosine Phosphatase 69D Confer Spatial Specificity to Axon Branching via Dscam1.

Axonal branching contributes substantially to neuronal circuit complexity. Studies in Drosophila have shown that loss of Dscam1 receptor diversity can fully block axon branching in mechanosensory neurons. Here we report that cell-autonomous loss of the receptor tyrosine phosphatase 69D (RPTP69D) and loss of midline-localized Slit inhibit formation of specific axon collaterals through modulation of Dscam1 activity. Genetic and biochemical data support a model in which direct binding of Slit to Dscam1 enhances the interaction of Dscam1 with RPTP69D, stimulating Dscam1 dephosphorylation. Single-growth-cone imaging reveals that Slit/RPTP69D are not required for general branch initiation but instead promote the extension of specific axon collaterals. Hence, although regulation of intrinsic Dscam1-Dscam1 isoform interactions is essential for formation of all mechanosensory-axon branches, the local ligand-induced alterations of Dscam1 phosphorylation in distinct growth-cone compartments enable the spatial specificity of axon collateral formation.

Transmembrane receptor DCC associates with protein synthesis machinery and regulates translation.

Extracellular signals regulate protein translation in many cell functions. A key advantage of control at the translational level is the opportunity to regulate protein synthesis within specific cellular subregions. However, little is known about mechanisms that may link extracellular cues to translation with spatial precision. Here, we show that a transmembrane receptor, DCC, forms a binding complex containing multiple translation components, including eukaryotic initiation factors, ribosomal large and small subunits, and monosomes. In neuronal axons and dendrites DCC colocalizes in particles with translation machinery, and newly synthesized protein. The extracellular ligand netrin promoted DCC-mediated translation and disassociation of translation components. The functional and physical association of a cell surface receptor with the translation machinery leads to a generalizable model for localization and extracellular regulation of protein synthesis, based on a transmembrane translation regulation complex.

Thermostable WW-Domain Scaffold to Design Functional ß-Sheet Miniproteins.

There has been a recent surge in the design of miniproteins for medicinal chemistry, biomaterial design, or synthetic biology. In particular, there is an interest in peptide scaffolds that fold reliably, predictably, and with solid stability. In this article, we present the design of a highly thermostable WW domain, a three-stranded ß-sheet motif, with a superior melting temperature of about 90 °C to serve as a core scaffold onto which receptor-like properties can be grafted. We have performed specific rounds of sequence iteration on a WW-domain consensus sequence to decipher sequence positions that affect structural and, thus, thermal stability. We identified a sequence-structure relationship that yields a highly thermostable WW-domain scaffold. High-resolution NMR spectroscopy was applied, which enabled the identification of structural features at the atomic scale that contribute to this high thermostability. Finally, we grafted the binding motifs of the three WW-domain groups─Group I, Group II/III, and Group IV─and organophosphate and metal binding onto the highly thermostable WW-domain scaffold and obtained thermostable de novo WW domains that indeed display the different binding modes that were intended. The organophosphate-binding WW domains exhibit melting temperatures that are up to 34 K higher than previously reported top-down designs. These results impressively demonstrate that the highly thermostable WW-domain core scaffold is a solid platform for the design of discrete and reliably folding functional ß-sheet peptide miniproteins, providing an essential addition to the toolbox of peptide scaffolds previously used in synthetic biology and material design.

Multimaterial 3D Laser Printing of Cell-Adhesive and Cell-Repellent Hydrogels.

Here, a straightforward method is reported for manufacturing 3D microstructured cell-adhesive and cell-repellent multimaterials using two-photon laser printing. Compared to existing strategies, this approach offers bottom-up molecular control, high customizability, and rapid and precise 3D fabrication. The printable cell-adhesive polyethylene glycol (PEG) based material includes an Arg-Gly-Asp (RGD) containing peptide synthesized through solid-phase peptide synthesis, allowing for precise control of the peptide design. Remarkably, minimal amounts of RGD peptide (< 0.1 wt%) suffice for imparting cell-adhesiveness, while maintaining identical mechanical properties in the 3D printed microstructures to those of the cell-repellent, PEG-based material. Fluorescent labeling of the RGD peptide facilitates visualization of its presence in cell-adhesive areas. To demonstrate the broad applicability of the system, the fabrication of cell-adhesive 2.5D and 3D structures is shown, fostering the adhesion of fibroblast cells within these architectures. Thus, this approach allows for the printing of high-resolution, true 3D structures suitable for diverse applications, including cellular studies in complex environments.

Design of Functional Globular ß-Sheet Miniproteins.

The design of discrete ß-sheet peptides is far less advanced than e. g. the design of α-helical peptides. The reputation of ß-sheet peptides as being poorly soluble and aggregation-prone often hinders active design efforts. Here, we show that this reputation is unfounded. We demonstrate this by looking at the ß-hairpin and WW domain. Their structure and folding have been extensively studied and they have long served as model systems to investigate protein folding and folding kinetics. The resulting fundamental understanding has led to the development of hyperstable ß-sheet scaffolds that fold at temperatures of 100 °C or high concentrations of denaturants. These have been used to design functional miniproteins with protein or nucleic acid binding properties, in some cases with such success that medical applications are conceivable. The ß-sheet scaffolds are not always completely rigid, but can be specifically designed to respond to changes in pH, redox potential or presence of metal ions. Some engineered ß-sheet peptides also exhibit catalytic properties, although not comparable to those of natural proteins. Previous reviews have focused on the design of stably folded and non-aggregating ß-sheet sequences. In our review, we now also address design strategies to obtain functional miniproteins from ß-sheet folding motifs.

Relationship of Thermostability and Binding Affinity in Metal-binding WW-Domain Minireceptors.

The design of metallo-miniproteins advances our understanding of the structural and functional roles of metals in proteins. We recently designed a metal-binding WW domain, WW-CA-Nle, which displays three histidine residues on its surface for coordination of divalent metals Ni(II), Zn(II) and Cu(II). However, WW-CA-Nle is a molten globule in the apo state and thus showed only moderate binding affinities with Kd values in the µM regime. In this report, we hypothesize that improved thermal stability of the apo state of the metal binding WW-domain scaffold should lead to improved preorganization of the metal-binding site and consequently to higher metal-binding affinities. By redesigning WW-CA-Nle, we obtained WW-CA variants, WW-CA-min and WW-CA-ANG, which were fully folded in the apo states and displayed moderate to excellent thermostabilities in the apo and holo states. We were able to show that the improved thermal stabilities led to improved metal binding, which was reflected in Kd values that were at least one order of magnitude lower compared to WW-CA-Nle. EPR spectroscopy and ITC measurements revealed a better defined and predisposed metal binding site in WW-CA-ANG.

An Engineered ß-Hairpin Peptide Forming Thermostable Complexes with ZnII , NiII , and CuII through a His3 Site.

The three-dimensional structure of a peptide, which determines its function, can denature at elevated temperatures, in the presence of chaotropic reagents, or in organic solvents. These factors limit the applicability of peptides. Herein, we present an engineered ß-hairpin peptide containing a His3 site that forms complexes with ZnII , NiII , and CuII . Circular dichroism spectroscopy shows that the peptide-metal complexes exhibit melting temperatures up to 80 °C and remain folded in 6 M guanidine hydrochloride as well as in organic solvents. Intrinsic fluorescence titration experiments were used to determine the dissociation constants of metal binding in the nano- to sub-nanomolar range. The coordination geometry of the peptide-CuII complex was studied by EPR spectroscopy, and a distorted square planar coordination geometry with weak interactions to axial ligands was revealed. Due to their impressive stability, the presented peptide-metal complexes open up interesting fields of application, such as the development of a new class of peptide-metal catalysts for stereoselective organic synthesis or the directed design of extremophilic ß-sheet peptides.

Rapid On-Resin N-Formylation of Peptides as One-Pot Reaction.

N-formylation is a common pre- and post-translational modification of the N-terminus or the lysine side chain of peptides and proteins that plays a role in the initiation of immune responses, gene expression, or epigenetics. Despite its high biological relevance, protocols for the chemical N-formylation of synthetic peptides are scarce. The few available methods are elaborate in their execution and the yields are highly sequence-dependent. We present a rapid, easy-to-use one-pot procedure that runs at room temperature and can be used to formylate protected peptides at both the N-terminus and the lysine side chain on the resin in near-quantitative yields. Only insensitive, storage-stable standard chemicals - formic acid, acetic anhydride, pyridine and DMF - are used. Formylation works for both short and long peptides of up to 34 amino acids and over the spectrum of canonical amino acids.

HAV-Peptides Attached to Colloidal Probes Faithfully Detect E-Cadherins Displayed on Living Cells.

Cell adhesion molecules are crucial for a variety of biological processes, including wound healing, barrier formation and tissue homeostasis. One of them is E-cadherin which is generally found at adherent junctions between epithelial cells. To identify this molecule on the surface of cells, E-cadherin mimetic peptides with a critical amino acid sequence of HAV (histidine-alanine-valine) were synthesized and attached to solid-supported membranes covering colloidal probes. Two different functionalization strategies were established, one based on the complexation of DOGS-NTA(Ni) with a polyhistidine-tagged HAV-peptide and the other one relying on the formation of a HAV-lipopeptide using in situ maleimide-thiol coupling. Binding studies were performed to verify the ability of the peptides to attach to the membrane surface. Compared to the non-covalent attachment via the His-tag, we achieved a higher yield by lipopeptide formation. Colloidal probes functionalized with HAV-peptides were employed to measure the presence of E-cadherins on living cells either using video particle tracking or force spectroscopy. Here, human HaCaT cells were examined confirming the specific interaction of the HAV-peptide with the E-cadherin of the cells. Statistical methods were also used to determine the number of single-bond ruptures and the force of a single bond. These findings may be essential for the development of novel biosynthetic materials given their potential to become increasingly relevant in medical applications.

Late-Stage Functionalisation of Peptides on the Solid Phase by an Iodination-Substitution Approach.

The functionalisation of peptides at a late synthesis stage holds great potential, for example, for the synthesis of peptide pharmaceuticals, fluorescent biosensors or peptidomimetics. Here we describe an on-resin iodination-substitution reaction sequence on homoserine that is also suitable for peptide modification in a combinatorial format. The reaction sequence is accessible to a wide range of sulfur nucleophiles with various functional groups including boronic acids, hydroxy groups or aromatic amines. In this way, methionine-like thioethers or thioesters and thiosulfonates are accessible. Next to sulfur nucleophiles, selenols, pyridines and carboxylic acids were successfully used as nucleophiles, whereas phenols did not react. The late-stage iodination-substitution approach is not only applicable to short peptides but also to the more complex 34-amino-acid WW domains. We applied this strategy to introduce 7-mercapto-4-methylcoumarin into a switchable ZnII responsive WW domain to design an iFRET-based ZnII sensor.

Effect of Methionine Sulfoxide on the Synthesis and Purification of Aggregation-Prone Peptides.

A two-step synthesis for methionine-containing hydrophobic and/or aggregation-prone peptides is presented that takes advantage of the reversibility of methionine oxidation. The use of polar methionine sulfoxide as a building block in solid-phase peptide synthesis improves the synthesis quality and yields the crude peptide, with significantly improved solubility compared to the reduced species. This facilitates the otherwise often laborious peptide purification by high-performance liquid chromatography. The subsequent reduction proceeds quantitatively. This approach has been optimised with the methionine-rich Tar-DNA-binding protein 43 (307-347), but is also more generally applicable, as demonstrated by the syntheses of human calcitonin and two aggregation-prone peptides from the human prion protein.

De Novo Designed α-Helical Coiled-Coil Peptides as Scaffolds for Chemical Reactions.

Coiled coils (CCs) are well-understood protein-folding motifs. They appear in a variety of oligomer states and as homo- and heteromeric assemblies. This versatility and the general accessibility by de novo design makes them ideal building blocks for synthetic biology. This Minireview highlights the efforts being made in designing small peptide catalysts or reaction templates based on the CC scaffold. The first reports described autocatalysis or mediation of peptide ligation based on CC recognition. Over the years, the designs became more advanced, catalyzing ester hydrolysis, acyl transfer and redox reactions with partial enzyme-like reactivity. Due to the ability to control CC assembly, and, in heterodimeric systems, the association and dissociation, the CC motif has become a common peptide tag in chemical biology.

Carbon Nanotubes Encapsulated in Coiled-Coil Peptide Barrels.

Specific functionalization of 1D nanomaterials such as near infrared (nIR) fluorescent single-walled carbon nanotubes (SWCNTs) is essential for colloidal stability and tailoring of their interactions with the environment. Here, we show that de novo designed alpha-helical coiled-coil peptide barrels (αHBs) with appropriate pores encapsulate and solubilize SWCNTs. In contrast, barrels without or with narrow pores showed a much smaller efficiency. Absorption/fluorescence spectroscopy and atomic force microscopy indicate that the SWCNTs are incorporated into the αHB's pore. The resulting hybrid SWCNT@αHBs display periodic surface coverage with a 40 nm pitch and remain fluorescent in the nIR. This approach presents a novel concept to encapsulate, discriminate and functionalize SWCNTs non-covalently with peptides and holds great promise for future applications in bioimaging or drug delivery.

Conformational Dynamics of Asparagine at Coiled-Coil Interfaces.

Coiled coils (CCs) are among the best-understood protein folds. Nonetheless, there are gaps in our knowledge of CCs. Notably, CCs are likely to be structurally more dynamic than often considered. Here, we explore this in an abundant class of CCs, parallel dimers, focusing on polar asparagine (Asn) residues in the hydrophobic interface. It is well documented that such inclusions discriminate between different CC oligomers, which has been rationalized in terms of whether the Asn can make side-chain hydrogen bonds. Analysis of parallel CC dimers in the Protein Data Bank reveals a variety of Asn side-chain conformations, but not all of these make the expected inter-side-chain hydrogen bond. We probe the structure and dynamics of a de novo-designed coiled-coil homodimer, CC-Di, by multidimensional nuclear magnetic resonance spectroscopy, including model-free dynamical analysis and relaxation-dispersion experiments. We find dynamic exchange on the millisecond time scale between Asn conformers with the side chains pointing into and out of the core. We perform molecular dynamics simulations that are consistent with this, revealing that the side chains are highly dynamic, exchanging between hydrogen-bonded-paired conformations in picoseconds to nanoseconds. Combined, our data present a more dynamic view for Asn at CC interfaces. Although inter-side-chain hydrogen bonding states are the most abundant, Asn is not always buried or engaged in such interactions. Because interfacial Asn residues are key design features for modulating CC stability and recognition, these further insights into how they are accommodated within CC structures will aid their predictive modeling, engineering, and design.

Introducing a fluorescence-based standard to quantify protein partitioning into membranes.

The affinity of peripheral membrane proteins for a lipid bilayer can be described using the partition coefficient (KP). Although several methods to determine KP are known, all possess limitations. To address some of these issues, we developed both: a versatile method based on single molecule detection and fluorescence imaging for determining KP, and a simple measurement standard employing hexahistidine-tagged enhanced green fluorescent protein (eGFP-His6) and free standing membranes of giant unilamellar vesicles (GUVs) functionalized with NTA(Ni) lipids as binding sites. To ensure intrinsic control, our method features two measurement modes. In the single molecule mode, fluorescence correlation spectroscopy (FCS) is applied to quantify free and membrane associated protein concentrations at equilibrium and calculate KP. In the imaging mode, confocal fluorescence images of GUVs are recorded and analyzed with semi-automated software to extract protein mean concentrations used to derive KP. Both modes were compared by determining the affinity of our standard, resulting in equivalent KP values. As observed in other systems, eGFP-His6 affinity for membranes containing increasing amounts of NTA(Ni) lipids rises in a stronger-than-linear fashion. We compared our dual approach with a FCS-based assay that uses large unilamellar vesicles (LUVs), which however fails to capture the stronger-than-linear trend for our NTA(Ni)-His6 standard. Hence, we determined the KP of the MARCKS effector domain with our FCS approach on GUVs, whose results are consistent with previously published data using LUVs. We finally provide a practical manual on how to measure KP and understand it in terms of molecules per lipid surface.

Controlling the Assembly of Coiled-Coil Peptide Nanotubes.

An ability to control the assembly of peptide nanotubes (PNTs) would provide biomaterials for applications in nanotechnology and synthetic biology. Recently, we presented a modular design for PNTs using α-helical barrels with tunable internal cavities as building blocks. These first-generation designs thicken beyond single PNTs. Herein we describe strategies for controlling this lateral association, and also for the longitudinal assembly. We show that PNT thickening is pH sensitive, and can be reversed under acidic conditions. Based on this, repulsive charge interactions are engineered into the building blocks leading to the assembly of single PNTs at neutral pH. The building blocks are modified further to produce covalently linked PNTs via native chemical ligation, rendering ca. 100 nm-long nanotubes. Finally, we show that small molecules can be sequestered within the interior lumens of single PNTs.

Modular Design of Self-Assembling Peptide-Based Nanotubes.

An ability to design peptide-based nanotubes (PNTs) rationally with defined and mutable internal channels would advance understanding of peptide self-assembly, and present new biomaterials for nanotechnology and medicine. PNTs have been made from Fmoc dipeptides, cyclic peptides, and lock-washer helical bundles. Here we show that blunt-ended α-helical barrels, that is, preassembled bundles of α-helices with central channels, can be used as building blocks for PNTs. This approach is general and systematic, and uses a set of de novo helical bundles as standards. One of these bundles, a hexameric α-helical barrel, assembles into highly ordered PNTs, for which we have determined a structure by combining cryo-transmission electron microscopy, X-ray fiber diffraction, and model building. The structure reveals that the overall symmetry of the peptide module plays a critical role in ripening and ordering of the supramolecular assembly. PNTs based on pentameric, hexameric, and heptameric α-helical barrels sequester hydrophobic dye within their lumens.

Peptide Boronic Acids by Late-Stage Hydroboration on the Solid Phase.

Organoboron compounds have a wide range of applications in numerous research fields, and metmhods to incorporate them in biomolecules are much sought after. Here, on-resin chemical syntheses of aliphatic and vinylogous peptide boronic acids are presented by transition metal-catalyzed late-stage hydroboration of alkene and alkyne groups in peptides and peptoids, for example on allyl- and propargylglycine residues, using readily available chemicals. These methods yield peptide boronic acids with much shorter linkers than previously reported on-resin methods. Furthermore, the methods are regio- and stereoselective, compatible with all canonical amino acid residues and can be applied to short, long, and in part even "difficult" peptide sequences. In a feasibility study, the protected peptide vinylboronic acids are further derivatized by the Petasis reaction using salicylaldehyde derivatives. The ability of the obtained peptide boronic acids to reversibly bind to carbohydrates is demonstrated in a catch-release model experiment using a fluorescently labeled peptide boronic acid on cross-linked dextran beads. In summary, this highlights the potential of the target compounds for drug discovery, glycan-specific target recognition, controlled release, and diagnostics.

A set of de novo designed parallel heterodimeric coiled coils with quantified dissociation constants in the micromolar to sub-nanomolar regime.

The availability of peptide and protein components that fold to defined structures with tailored stabilities would facilitate rational protein engineering and synthetic biology. We have begun to generate a toolkit of such components based on de novo designed coiled-coil peptides that mediate protein-protein interactions. Here, we present a set of coiled-coil heterodimers to add to the toolkit. The lengths of the coiled-coil regions are 21, 24, or 28 residues, which deliver dissociation constants in the micromolar to sub-nanomolar range. In addition, comparison of two related series of peptides highlights the need for including polar residues within the hydrophobic interfaces, both to specify the dimer state over alternatives and to fine-tune the dissociation constants.