Optimized Lithium Ion Coordination via Chlorine Substitution to Enhance Ionic Conductivity of Garnet-Based Solid Electrolytes.

Garnet-type solid-state electrolytes attract abundant attentions due to the broad electrochemical window and remarkable thermal stability while their poor ionic conductivity obstructs their widespread application in all-solid-state batteries. Herein, the enhanced ionic conductivity of garnet-type solid electrolytes is achieved by partially substituting O2- sites with Cl- anions, which effectively reduce Li+ migration barriers while preserving the highly conductive cubic phase of garnet-type solid-state electrolytes. This substitution not only weakens the anchoring effect of anions on Li+ to widen the size of Li+ diffusion channel but also optimizes the occupancy of Li+ at different sites, resulting in a substantial reduction of the Li+ migration barrier and a notable improvement in ionic conductivity. Leveraging these advantageous properties, the developed Li6.35La3Zr1.4Ta0.6O11.85-Cl0.15 (LLZTO-0.15Cl) electrolyte demonstrates high Li+ conductivity of 4.21×10-6 S cm-1. When integrated with LiFePO4 (LFP) cathode and metallic lithium anode, the LLZTO-0.15Cl electrolyte enables the solid-state battery to operate for more than 100 cycles with a high capacity retention of 76.61% and superior Coulombic efficiency of 99.48%. This work shows a new strategy for modulating anionic framework to enhance the conductivity of garnet-type solid-state electrolytes.

Adjusting Li+ Solvation Structures via Dipole-Dipole Interaction to Construct Inorganic-Rich Interphase for High-Performance Li Metal Batteries.

Practical applications of lithium metal batteries are limited by unstable solid electrolyte interphase (SEI) and uncontrollable dendrite Li deposition. Regulating the solvation structure of Li+ via modifying electrolyte components enables optimizing the structure of the SEI and realizing dendrite-free Li deposition. In this work, it is found that the ionic-dipole interactions between the electron-deficient B atoms in lithium oxalyldifluoro borate (LiDFOB) and the O atoms in the DME solvent molecule can weaken the interaction between the DME molecule and Li+, accelerating the desolvation of Li+. On this basis, the ionic-dipole interactions facilitate the entry of abundant anions into the inner solvation sheath of Li+, which promotes the formation of inorganic-rich SEI. In addition, the interaction between DFOB- and DME molecules reduces the highest occupied molecular orbital energy level of DME molecules in electrolytes, which improves the oxidative stability of the electrolytes system. As a result, the Li||Li cells in LiDFOB-containing electrolytes exhibit an excellent cyclability of over 1800 h with a low overpotential of 18.2 mV, and the Li||LiFePO4 full cells display a high-capacity retention of 93.4% after 100 cycles with a high Coulombic efficiency of 99.3%.

2D MXene/MBene Superlattice with Narrow Bandgap as Superior Electrocatalyst for High-Performance Lithium-Oxygen Battery.

Lithium-oxygen (Li-O2) battery with large theoretical energy density (≈3500 Wh kg-1) is one of the most promising energy storage and conversion systems. However, the slow kinetics of oxygen electrode reactions inhibit the practical application of Li-O2 battery. Thus, designing efficient electrocatalysts is crucial to improve battery performance. Here, Ti3C2 MXene/Mo4/3B2-x MBene superlattice is fabricated its electrocatalytic activity toward oxygen redox reactions in Li-O2 battery is studied. It is found that the built-in electric field formed by a large work function difference between Ti3C2 and Mo4/3B2-x will power the charge transfer at the interface from titanium (Ti) site in Ti3C2 to molybdenum (Mo) site in Mo4/3B2-x. This charge transfer increases the electron density in 4d orbital of Mo site and decreases the d-band center of Mo site, thus optimizing the adsorption of intermediate product LiO2 at Mo site and accelerating the kinetics of oxygen electrode reactions. Meanwhile, the formed film-like discharge products (Li2O2) improve the contact with electrode and facilitate the decomposition of Li2O2. Based on the above advantages, the Ti3C2 MXene/Mo4/3B2-x MBene superlattice-based Li-O2 battery exhibits large discharge specific capacity (17 167 mAh g-1), low overpotential (1.16 V), and superior cycling performance (475 cycles).

Adjusting the 3d Orbital Occupation of Ti in Ti3 C2 MXene via Nitrogen Doping to Boost Oxygen Electrode Reactions in Li-O2 Battery.

Rationally designing efficient catalysts is the key to promote the kinetics of oxygen electrode reactions in lithium-oxygen (Li-O2 ) battery. Herein, nitrogen-doped Ti3 C2 MXene prepared via hydrothermal method (N-Ti3 C2 (H)) is studied as the efficient Li-O2 battery catalyst. The nitrogen doping increases the disorder degree of N-Ti3 C2 (H) and provides abundant active sites, which is conducive to the uniform formation and decomposition of discharge product Li2 O2 . Besides, density functional theory calculations confirm that the introduction of nitrogen can effectively modulate the 3d orbital occupation of Ti in N-Ti3 C2 (H), promote the electron exchange between Ti 3d orbital and O 2p orbital, and accelerate oxygen electrode reactions. Specifically, the N-Ti3 C2 (H) based Li-O2 battery delivers large discharge capacity (11 679.8 mAh g-1 ) and extended stability (372 cycles). This work provides a valuable strategy for regulating 3d orbital occupancy of transition metal in MXene to improve the catalytic activity of oxygen electrode reactions in Li-O2 battery.

Manipulating Electron Delocalization of Metal Sites via a High-Entropy Strategy for Accelerating Oxygen Electrode Reactions in Lithium-Oxygen Batteries.

High-entropy perovskite oxides, in which the B-type metal site of perovskite oxides (ABO3) is occupied by over five kinds of transition metal ions, show promising applications in energy storage and conversion fields. Herein, high-entropy perovskite oxides (LaSr(5TM)O3) composed of Cr, Mn, Fe, Co, and Ni at the B-type metal site are prepared as oxygen electrocatalysts for Li-O2 batteries. The presence of compressive strain in LaSr(5TM)O3 effectively regulates the 3d orbit occupancy of the active Co site (Co2+ → Co3+) and lifts the energy level of the Co d-band center, thus leading to enhanced adsorption toward the LiO2 intermediate on Co sites. Furthermore, the high electron-drawing capability of Cr sites ensures sufficient electron exchange and further strengthens the adsorption of LiO2. As expected, the Li-O2 battery with a LaSr(5TM)O3 electrode delivers a low overpotential (0.79 V) and superior cyclability (226 cycles). This study provides a meaningful strain strategy to improve the electrocatalytic activity of multicomponent oxides via fabricating high-entropy materials.

Robust oxygen adsorbent mediated oxygen redox reactions for high performance lithium-oxygen battery.

Lithium-oxygen batteries (LOBs) have been widely studied because of their ultra-high energy density (∼3500 Wh kg-1). However, the reversibility and stability of LOBs are greatly limited by the sluggish kinetics of oxygen reduction/evolution reactions (ORR/OER) and severely parasitic reactions on oxygen electrodes. Electrolyte in LOBs plays an important role in the transport of reactive oxygen species and Li+, which greatly affects the kinetics and reversibility of the charging and discharging processes of batteries. In this work, perfluorooctane (PFO) is used as the additive in 1.0 M LiTFSI/TEGDEM electrolyte for LOBs to regulate the kinetics of oxygen electrode reactions. Due to the strong adsorption ability of PE toward oxygen, the oxygen concentration inside the electrolyte is greatly increased after the addition of PE. In addition, the PE-added electrolyte also exhibits superior electrochemical stability and is capable of triggering solution-mediated Li2O2 growth pathway during the discharge process of the LOBs. Therefore, with the increased oxygen concentration and the optimized electrode/electrolyte interface, the ORR/OER kinetics on the oxygen electrode is significantly promoted, which enables the LOBs with excellent energy efficiency and cycling life. This work provides a new idea for the design of oxygen-rich and high-performance electrolyte for lithium-oxygen batteries.

Controllable Regulation of the Oxygen Redox Process in Lithium-Oxygen Batteries by High-Configuration-Entropy Spinel with an Asymmetric Octahedral Structure.

Designing bifunctional electrocatalysts to boost oxygen redox reactions is critical for high-performance lithium-oxygen batteries (LOBs). In this work, high-entropy spinel (Co0.2Mn0.2Ni0.2Fe0.2Cr0.2)3O4 (HEOS) is fabricated by modulating the internal configuration entropy of spinel and studied as the oxygen electrode catalyst in LOBs. Under the high-entropy atomic environment, the Co-O octahedron in spinel undergoes asymmetric deformation, and the reconfiguration of the electron structure around the Co sites leads to the upward shift of the d-orbital centers of the Co sites toward the Fermi level, which is conducive to the strong adsorption of redox intermediate LiO2 on the surface of the HEOS, ultimately forming a layer of a highly dispersed Li2O2 thin film. Thin-film Li2O2 is beneficial for ion diffusion and electron transfer at the electrode-electrolyte interface, which makes the product easy to decompose during the charge process, ultimately accelerating the kinetics of oxygen redox reactions in LOBs. Based on the above advantages, HEOS-based LOBs deliver high discharge/charge capacity (12.61/11.72 mAh cm-2) and excellent cyclability (424 cycles). This work broadens the way for the design of cathode catalysts to improve oxygen redox kinetics in LOBs.

Energy level regulation of anions via hydrogen bond effects to construct a stable solid electrolyte interface for a high-stability lithium metal anode.

An intermolecular hydrogen bond between 2,5-dihydroxyterephthalic acid and the anions in the Li+ solvation shell is constructed to promote the formation of a LiF-rich SEI on a metallic Li electrode. Li metal batteries with improved cyclability (140 cycles under an N/P ratio of 4.9) and high capacity retention (90%) are eventually obtained.

Structure and Charge Regulation Strategy Enabling Superior Cycling Stability of Ni-Rich Cathode Materials.

Ni-rich layered oxides LiNixCoyMn1-x-yO2 (NCMs, x > 0.8) are the most promising cathode candidates for Li-ion batteries because of their superior specific capacity and cost affordability. Unfortunately, NCMs suffer from a series of formidable challenges such as structural instability and incompatibility with commonly used electrolytes, which seriously hamper their practical applications on a large scale. Herein, the Al/Ta codoping modification strategy is proposed to improve the performance of the LiNi0.83Co0.1Mn0.07O2 cathode, and the as-prepared Al/Ta-modified LiNi0.83Co0.1Mn0.07O2 delivers exceptional cycling stability with a capacity retention of 97.4% after 150 cycles at 1C and an excellent rate performance with a high capacity of 143.2 mAh g-1 even at 3C. Based on the experimental study, it is found that the structural stability of NCM is strengthened due to the regulated coordination of oxygen by introducing a robust Ta-O covalent bond, which prevents the layered structure from collapsing. Moreover, the reconstructed rock-salt-like surface is capable of effectively inhibiting interfacial side reactions as well as the overgrowth of the cathode-electrolyte interface. Theoretically, the energy of Li/Ni mixing is significantly increased with the introduction of Al and Ta elements in Al/Ta codoped NCM, leading to inhibited adverse phase transition during cycling. A feasible pathway for designing and developing advanced Ni-rich cathode materials for Li-ion batteries is provided in this work.