RESUMO
Herein we introduce a facile, solution-phase protocol to modify the Lewis basic surface of few-layer black phosphorus (bP) and demonstrate its effectiveness at providing ambient stability and tuning of electronic properties. Commercially available group 13 Lewis acids that range in electrophilicity, steric bulk, and Pearson hard/soft-ness are evaluated. The nature of the interaction between the Lewis acids and the bP lattice is investigated using a range of microscopic (optical, atomic force, scanning electron) and spectroscopic (energy dispersive, X-ray photoelectron) methods. Al and Ga halides are most effective at preventing ambient degradation of bP (>84â h for AlBr3 ), and the resulting field-effect transistors show excellent IV characteristics, photocurrent, and current stability, and are significantly p-doped. This protocol, chemically matched to bP and compatible with device fabrication, opens a path for deterministic and persistent tuning of the electronic properties in bP.
RESUMO
Surface functionalization of two-dimensional crystals is a key path to tuning their intrinsic physical and chemical properties. However, synthetic protocols and experimental strategies to directly probe chemical bonding in modified surfaces are scarce. Introduced herein is a mild, surface-specific protocol for the surface functionalization of few-layer black phosphorus nanosheets using a family of photolytically generated nitrenes (RN) from the corresponding azides. By embedding spectroscopic tags in the organic backbone, a multitude of characterization techniques are employed to investigate in detail the chemical structure of the modified nanosheets, including vibrational, X-ray photoelectron, solid state 31 Pâ NMR, and UV-vis spectroscopy. To directly probe the functional groups introduced on the surface, R fragments were selected such that in conjunction with vibrational spectroscopy, 15 N-labeling experiments, and DFT methods, diagnostic P=N vibrational modes indicative of iminophosphorane units on the nanosheet surface could be conclusively identified.
RESUMO
The development of groupâ 15 Lewis acids is an area of active investigation that has led to numerous advances in anion sensing and catalysis. While phosphorus has drawn considerable attention, emerging research shows that organoantimony(III) reagents may also act as potent Lewis acids. Comparison of the properties of SbPh3 , Sb(C6 F5 )3 , and SbArF 3 with those of their tetrachlorocatecholate analogues SbPh3 Cat, Sb(C6 F5 )3 Cat, and SbArF 3 Cat (Cat=o-O2 C6 Cl4 , ArF =3,5-(CF3 )2 C6 H3 ) demonstrates that the Lewis acidity of electron deficient organoantimony(III) reagents can be readily enhanced by oxidation to the +V state-as verified by binding studies, organic reaction catalysis, and computational studies. The results are rationalized by explaining that oxidation of the antimony center leads to a lowering of the accepting σ* orbital and a deeper carving of the associated σ-hole.
RESUMO
Treatment of P4 with in situ generated [Na][SnPh3] leads to the formation of the sodium monophosphide [Na][P(SnPh3)2] and the Zintl salt [Na]3[P7]. The former was isolated in 46% yield as the crystalline salt [Na(benzo-15-crown-5)][P(SnPh3)2] and used to prepare the homoleptic phosphine P(SnPh3)3, isolated in 67% yield, as well as the indium derivative (XL)2InP(SnPh3)2 (XL = S(CH2)2NMe2), isolated in 84% yield, and the gold complex (Ph3P)AuP(SnPh3)2. The compounds [Na(benzo-15-crown-5)][P(SnPh3)2], P(SnPh3)3, (XL)2InP(SnPh3)2, and (Ph3P)AuP(SnPh3)2 were characterized using multinuclear NMR spectroscopy and X-ray crystallography. The bonding in (Ph3P)AuP(SnPh3)2 was dissected using natural bond orbital (NBO) methods, in response to the observation from the X-ray crystal structure that the dative P:âAu bond is slightly shorter than the shared electron-pair P-Au bond. The bonding in (XL)2InP(SnPh3)2 was also interrogated using (31)P and (13)C solid-state NMR and computational methods. Co-product [Na]3[P7] was isolated in 57% yield as the stannyl heptaphosphide P7(SnPh3)3, following salt metathesis with ClSnPh3. Additionally, we report that treatment of P4 with sodium naphthalenide in dimethoxyethane at 22 °C is a convenient and selective method for the independent synthesis of Zintl ion [Na]3[P7]. The latter was isolated as the silylated heptaphosphide P7(SiMe3)3, in 67% yield, or as the stannyl heptaphosphide P7(SnPh3)3 in 65% yield by salt metathesis with ClSiMe3 or ClSnPh3, respectively.
RESUMO
Thermodynamic, kinetic, and computational studies are reported for oxygen atom transfer (OAT) to the complex V(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2, 1) from compounds containing N-O bonds with a range of BDEs spanning nearly 100 kcal mol(-1): PhNO (108) > SIPr/MesCNO (75) > PyO (63) > IPr/N2O (62) > MesCNO (53) > N2O (40) > dbabhNO (10) (Mes = mesityl; SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene; Py = pyridine; IPr = 1,3-bis(diisopropyl)phenylimidazol-2-ylidene; dbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene). Stopped flow kinetic studies of the OAT reactions show a range of kinetic behavior influenced by both the mode and strength of coordination of the O donor and its ease of atom transfer. Four categories of kinetic behavior are observed depending upon the magnitudes of the rate constants involved: (I) dinuclear OAT following an overall third order rate law (N2O); (II) formation of stable oxidant-bound complexes followed by OAT in a separate step (PyO and PhNO); (III) transient formation and decay of metastable oxidant-bound intermediates on the same time scale as OAT (SIPr/MesCNO and IPr/N2O); (IV) steady-state kinetics in which no detectable intermediates are observed (dbabhNO and MesCNO). Thermochemical studies of OAT to 1 show that the V-O bond in O≡V(N[t-Bu]Ar)3 is strong (BDE = 154 ± 3 kcal mol(-1)) compared with all the N-O bonds cleaved. In contrast, measurement of the N-O bond in dbabhNO show it to be especially weak (BDE = 10 ± 3 kcal mol(-1)) and that dissociation of dbabhNO to anthracene, N2, and a (3)O atom is thermodynamically favorable at room temperature. Comparison of the OAT of adducts of N2O and MesCNO to the bulky complex 1 show a faster rate than in the case of free N2O or MesCNO despite increased steric hindrance of the adducts.
RESUMO
The 3,4,8,9-tetramethyl-1,6-diphospha-bicyclo-[4.4.0]deca-3,8-diene (P2(C6H10)2) framework containing a P-P bond has allowed for an unprecedented selectivity toward functionalization of a single phosphorus lone pair with reference to acyclic diphosphane molecules. Functionalization at the second phosphorus atom was found to proceed at a significantly slower rate, thus opening the pathway for obtaining mixed functional groups for a pair of P-P bonded λ(5)-phosphorus atoms. Reactivity with the chalcogen-atom donors MesCNO (Mes = 2,4,6-C6H2Me3) and SSbPh3 has allowed for the selective synthesis of the diphosphane chalcogenides OP2(C6H10)2 (87%), O2P2(C6H10)2 (94%), SP2(C6H10)2 (56%), and S2P2(C6H10)2 (87%). Computational studies indicate that the oxygen-atom transfer reactions involve penta-coordinated phosphorus intermediates that have four-membered {PONC} cycles. The P-E bond dissociation enthalpies in EP2(C6H10)2 were measured via calorimetric studies to be 134.7 ± 2.1 kcal/mol for P-O, and 93 ± 3 kcal/mol for P-S, respectively, in good agreement with the computed values. Additional reactivity with breaking of the P-P bond and formation of diphosphinate O3P2(C6H10)2 was only observed to occur upon heating of dimethylsulfoxide solutions of the precursor. Reactivity of diphosphane P2(C6H10)2 with azides allowed the isolation of monoiminophosphoranes (RN)P2(C6H10)2(R = Mes, CPh3, SiMe3), and treatment with additional MesN3 yielded symmetric and unsymmetric diiminodiphosphoranes (RN)(MesN)P2(C6H10)2 (91% for R = Mes). Metalation reactions with the bulky diiminodiphosphorane ligand (MesN)2P2(C6H10)2 (nppn) allowed for the isolation and characterization of (nppn)Mo(η(3)-C3H5)Cl(CO)2 (91%), (nppn)NiCl2 (76%), and [(nppn)Ni(η(3)-2-C3H4Me)][OTf] showing that these ligands provide an attractive preorganized binding pocket for both late and early transition metals.
RESUMO
Treatment of V(N[(t)Bu]Ar)(3) (1) (Ar = 3,5-Me(2)C(6)H(3)) with O(2) was shown by stopped-flow kinetic studies to result in the rapid formation of (η(1)-O(2))V(N[(t)Bu]Ar)(3) (2) (ΔH() = 3.3 ± 0.2 kcal/mol and ΔS() = -22 ± 1 cal mol(-1) K(-1)), which subsequently isomerizes to (η(2)-O(2))V(N[(t)Bu]Ar)(3) (3) (ΔH() = 10.3 ± 0.9 kcal/mol and ΔS() = -6 ± 4 cal mol(-1) K(-1)). The enthalpy of binding of O(2) to form 3 is -75.0 ± 2.0 kcal/mol, as measured by solution calorimetry. The reaction of 3 and 1 to form 2 equiv of O≡V(N[(t)Bu]Ar)(3) (4) occurs by initial isomerization of 3 to 2. The results of computational studies of this rearrangement (ΔH = 4.2 kcal/mol; ΔH() = 16 kcal/mol) are in accord with experimental data (ΔH = 4 ± 3 kcal/mol; ΔH() = 14 ± 3 kcal/mol). With the aim of suppressing the formation of 4, the reaction of O(2) with 1 in the presence of (t)BuCN was studied. At -45 °C, the principal products of this reaction are 3 and (t)BuC(âO)N≡V(N[(t)Bu]Ar)(3) (5), in which the bound nitrile has been oxidized. Crystal structures of 3 and 5 are reported.
RESUMO
The Nb-P triple bond in [P≡Nb(N[Np]Ar)(3)](-) (Np = CH(2)(t)Bu; Ar = 3,5-Me(2)C(6)H(3)) has produced the first case of P(4) activation by a metal-ligand multiple bond. Treatment of P(4) with the sodium salt of the niobium phosphide complex in weakly coordinating solvents led to formation of the cyclo-P(3) anion [(P(3))Nb(N[Np]Ar)(3)](-). Treatment in tetrahydrofuran (THF) led to the formation of a cyclo-P(5) anion [(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)](-), which represents a rare example of a substituted pentaphosphacyclopentadienyl ligand. The P(4) activation pathway was shown to depend on the dimer-monomer equilibrium of the niobium phosphide reagent, which, in turn, depends on the solvent used for the reaction. The pathway leading to the cyclo-P(3) product was shown to require a 2:1 ratio of the phosphide anion to P(4), while the cyclo-P(5) formation requires a 1:1 ratio. The cyclo-P(3) salt has been isolated in 56% yield as orange crystals of the [Na(THF)](2)[(P(3))Nb(N[Np]Ar)(3)](2) dimer or in 83% yield as an orange powder of [Na(12-crown-4)(2)][(P(3))Nb(N[Np]Ar)(3)]. A solid-state X-ray diffraction experiment on the former salt revealed that each Nb-P(3) unit exhibits pseudo-C(3) symmetry, while (31)P NMR spectroscopy showed a sharp signal at -223 ppm that splits into a doublet-triplet pair below -50 °C. It was demonstrated that this salt can serve as a P(3)(3-) source upon treatment with AsCl(3), albeit with modest yield of AsP(3). The cyclo-P(5) salt was isolated in 71% yield and structurally characterized from red crystals of [Na(THF)(6)][(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)]. The anion in this salt can be interpreted as the product of trapping of an intermediate pentaphosphacycplopentadienyl structure through migration of one anilide ligand onto the P(5) ring. The W(CO)(5)-capped cyclo-P(3) salt was also isolated in 60% yield as [Na(THF)][(OC)(5)W(P(3))Nb(N[Np]Ar)(3)] from the activation of 0.5 equiv of P(4) with the sodium salt of the tungsten pentacarbonyl adduct of the niobium phosphide anion.
RESUMO
A pyridine-linked bis(aniline) pincer ligand, [2]H(2) ([2]H(2) = (2,6-NC(5)H(3)(2-(2,4,6-Me(3)C(6)H(2))-NHC(6)H(4))(2)), has been synthesized in two steps. Deprotonation with Me(3)SiCH(2)Li followed by metalation with FeCl(2) yielded a LiCl adduct of [2]Fe. The complex is freed of LiCl with excess TlPF(6) or by crystallization from toluene/petroleum ether, giving [2]Fe(THF). [2]Fe(THF) reacts with I(2) and O(2) to generate [2]FeI and ([2]Fe)(2)O, respectively. The complexes have been characterized by (1)H NMR spectroscopy, elemental analysis, X-ray crystallography, and UV-vis spectroscopy. [2]Fe(THF) has been examined using cyclic voltammetry.
Assuntos
Anilidas/química , Compostos Ferrosos/química , Compostos Ferrosos/síntese química , Piridinas/química , Cristalografia por Raios X , Ligantes , Modelos Moleculares , Estrutura MolecularRESUMO
The binding of amphiphilic molecules to lipid bilayers is followed by 19F NMR using chemical shift and line shape differences between the solution and membrane-tethered states of -CF 3 and -CHF 2 groups. A chemical shift separation of 1.6 ppm combined with a high natural abundance and high sensitivity of 19F nuclei offers an advantage of using 19F NMR spectroscopy as an efficient tool for rapid time-resolved screening of pharmaceuticals for membrane binding. We illustrate the approach with molecules containing both fluorinated tails and an acrylate moiety, resolving the signals of molecules in solution from those bound to synthetic dimyristoylphosphatidylcholine bilayers both with and without magic angle sample spinning. The potential in vitro and in vivo biomedical applications are outlined. The presented method is applicable with the conventional NMR equipment, magnetic fields of several Tesla, stationary samples, and natural abundance isotopes.
Assuntos
Bicamadas Lipídicas , Espectroscopia de Ressonância Magnética/métodos , Preparações Farmacêuticas/metabolismo , Flúor , Sondas MolecularesRESUMO
A family of cis-macrocyclic diphosphines was prepared in just three steps from white phosphorus and commercial materials using a modular synthetic approach. Alkylation of bicyclic diphosphane 3,4,8,9-tetramethyl-1,6-diphosphabicyclo(4.4.0)deca-3,8-diene, or P2(dmb)2, produced phosphino-phosphonium salts [R-P2(dmb)2]X, where R is methyl, benzyl and isobutyl, in yields of 90-96%. Treatment of these salts with organolithium or Grignard reagents yielded symmetric and unsymmetric macrocyclic diphosphines of the form cis-1-R-6-R'-3,4,8,9-tetramethyl-2,5,7,10-tetrahydro-1,6-DiPhospheCine, or R,R'-DPC, in which R' is methyl, cyclohexyl, phenyl or mesityl, in yields of 46-94%. Alternatively, symmetric diphosphine Cy2-DPC was synthesized in 74% yield from the dichlorodiphosphine Cl2P2(dmb)2. As a first application, these cis-macrocyclic diphosphines were used as ligands in the nickel-catalyzed synthesis of acrylate from CO2 and ethylene, for which they showed promising catalytic activity.
RESUMO
As part of our ongoing studies of water tolerant Lewis acids, we have synthesized and investigated the properties of Sb(C6F5)3(O2C6Cl4), a fluorinated stiborane whose Lewis acidity approaches that of B(C6F5)3. While chloroform solutions of this Lewis acid can be kept open to air or exposed to water for extended periods of time, this new Lewis acid reacts with P t Bu3 and paraformaldehyde to form the corresponding formaldehyde adduct t Bu3P-CH2-O-Sb(C6F5)3(O2C6Cl4). To test if this reactivity can also be observed with systems that combine the phosphine and the stiborane within the same molecule, we have also prepared o-C6H4(PPh2)(SbAr2(O2C6Cl4)) (Ar = Ph, C6F5). These yellow compounds, which possess an intramolecular PâSb interaction, are remarkably inert to water but do, nonetheless, react with and accomodate formaldehyde into the P/Sb pocket. In the case of the fluorinated derivative o-C6H4(PPh2)(Sb(C6F5)2(O2C6Cl4)), formaldehyde complexation, which occurs in water/dichloromethane biphasic mixtures, is accompanied by a colourimetric turn-off response thus highlighting the potential that this chemistry holds in the domain of molecular sensing.
RESUMO
We herein report the preparation of several mononuclear-metaphosphate complexes using simple techniques and mild conditions with yields ranging from 56% to 78%. Treatment of cyclo-tetrametaphosphate ([TBA]4[P4O12]·5H2O, TBA = tetra-n-butylammonium) with various metal sources including (CH3CN)3Mo(CO)3, (CH3CN)2Mo(CO)2(η(3)-C3H5)Cl, MoO2Cl2(OSMe2)2, and VOF3, leads to the clean and rapid formation of [TBA]4[(P4O12)Mo(CO)3]·2H2O, [TBA]3[(P4O12)Mo(CO)2(η(3)-C3H5)], [TBA]3[(P4O12)MoO2Cl] and [TBA]3[(P4O12)VOF2]·Et2O salts in isolated yields of 69, 56, 68, and 56% respectively. NMR spectroscopy, NMR simulations and single crystal X-ray studies reveal that the [P4O12](4-) anion behaves as a tridentate ligand wherein one of the metaphosphate groups is not directly bound to the metal. cyclo-Trimetaphosphate-metal complexes were prepared using a similar procedure i.e., treatment of [PPN]3[P3O9]·H2O (PPN = bis(triphenylphosphine)iminium) with the metal sources (CH3CN)2Mo(CO)2(η(3)-C3H5)Cl, MoO2Cl2(OSMe2)2, MoOCl3, VOF3, WOCl4, and WO2Cl2(CH3CN)2 to produce the corresponding salts, [PPN]2[(P3O9)Mo(CO)2(η(3)-C3H5)], [PPN]2[(P3O9)MoO2Cl], [PPN]2[(P3O9)MoOCl2], [PPN]2[(P3O9)VOF2]·2CH2Cl2, and [PPN]2[(P3O9)WO2Cl] in isolated yields of 78, 56, 75, 59, and 77% respectively. NMR spectroscopy, NMR simulations and single-crystal X-ray studies indicate that the trianionic ligand [P3O9](3-) in these complexes also has κ(3) connectivity.