Tunable Oxidized-Chitin Hydrogels with Customizable Mechanical Properties by Metal or Hydrogen Ion Exposure.

This study focuses on the optimization of chitin oxidation in C6 to carboxylic acid and its use to obtain a hydrogel with tunable resistance. After the optimization, water-soluble crystalline ß-chitin fibrils (ß-chitOx) with a degree of functionalization of 10% were obtained. Diverse reaction conditions were also tested for α-chitin, which showed a lower reactivity and a slower reaction kinetic. After that, a set of hydrogels was synthesized from ß-chitOx 1 wt.% at pH 9, inducing the gelation by sonication. These hydrogels were exposed to different environments, such as different amounts of Ca2+, Na+ or Mg2+ solutions, buffered environments such as pH 9, PBS, pH 5, and pH 1, and pure water. These hydrogels were characterized using rheology, XRPD, SEM, and FT-IR. The notable feature of these hydrogels is their ability to be strengthened through cation chelation, being metal cations or hydrogen ions, with a five- to tenfold increase in their storage modulus (G'). The ions were theorized to alter the hydrogen-bonding network of the polymer and intercalate in chitin's crystal structure along the a-axis. On the other hand, the hydrogel dissolved at pH 9 and pure water. These bio-based tunable hydrogels represent an intriguing material suitable for biomedical applications.

Challenges in the Direct Detection of Chirality-induced Spin Selectivity: Investigation of Foldamer-based Donor-acceptor Dyads.

Over the past two decades, the chirality-induced spin selectivity (CISS) effect was reported in several experiments disclosing a unique connection between chirality and electron spin. Recent theoretical works highlighted time-resolved Electron Paramagnetic Resonance (trEPR) as a powerful tool to directly detect the spin polarization resulting from CISS. Here, we report a first attempt to detect CISS at the molecular level by linking the pyrene electron donor to the fullerene acceptor with chiral peptide bridges of different length and electric dipole moment. The dyads are investigated by an array of techniques, including cyclic voltammetry, steady-state and transient optical spectroscopies, and trEPR. Despite the promising energy alignment of the electronic levels, our multi-technique analysis reveals no evidence of electron transfer (ET), highlighting the challenges of spectroscopic detection of CISS. However, the analysis allows the formulation of guidelines for the design of chiral organic model systems suitable to directly probe CISS-polarized ET.

A short oxazolidine-2-one containing peptide forms supramolecular hydrogels under controlled conditions.

Low-molecular-weight hydrogels are made of a small percentage of small organic molecules dispersed in an aqueous medium, which may aggregate in several manners using different methods. However, often the organic gelator in water has poor solubility, so the addition of a solubilising agent is required. In the case of acidic gelators, this mainly consists of the addition of a strong base, that is sodium hydroxide, that deprotonates the acidic moiety, so the gelator molecules become more soluble and tend to assemble into micelles, forming a dispersion. Some gelators, however, are sensitive to the harsh pH and get hydrolysed. This is the case of some molecules presenting carbamates in their features, like Fmoc-protected or oxazolidinone-containing peptides. In this paper, we present a valid alternative to sodium hydroxide, by dissolving a tripeptide containing an oxazolidinone moiety in a phosphate buffer (PB) medium at pH 7.4. The results obtained with the NaOH dissolution are compared with the ones with PB, as both methods present advantages and drawbacks. The use of NaOH produces transparent but weak hydrogels, as it exposes the gelator to harsh conditions that end up in its partial hydrolysis, which is more pronounced at high concentrations (≥10 mM). Using PB to dissolve the gelator, this problem is completely avoided as no hydrolysis product has been detected in the hydrogels, which are very stiff although more opaque. By tuning the preparation conditions, we can obtain a wide variety of hydrogels, with the properties required by the final application.

Valorization Strategies in CO2 Capture: A New Life for Exhausted Silica-Polyethylenimine.

The search for alternative ways to give a second life to materials paved the way for detailed investigation into three silica-polyethylenimine (Si-PEI) materials for the purpose of CO2 adsorption in carbon capture and storage. A solvent extraction procedure was investigated to recover degraded PEIs and silica, and concomitantly, pyrolysis was evaluated to obtain valuable chemicals such as alkylated pyrazines. An array of thermal (TGA, Py-GC-MS), mechanical (rheology), and spectroscopical (ATR-FTIR, 1H-13C-NMR) methods were applied to PEIs extracted with methanol to determine the relevant physico-chemical features of these polymers when subjected to degradation after use in CO2 capture. Proxies of degradation associated with the plausible formation of urea/carbamate moieties were revealed by Py-GC-MS, NMR, and ATR-FTIR. The yield of alkylpyrazines estimated by Py-GC-MS highlighted the potential of exhausted PEIs as possibly valuable materials in other applications.

Delivery of Active Peptides by Self-Healing, Biocompatible and Supramolecular Hydrogels.

Supramolecular and biocompatible hydrogels with a tunable pH ranging from 5.5 to 7.6 lead to a wide variety of formulations useful for many different topical applications compatible with the skin pH. An in vitro viability/cytotoxicity test of the gel components demonstrated that they are non-toxic, as the cells continue to proliferate after 48 h. An analysis of the mechanical properties demonstrates that the hydrogels have moderate strength and an excellent linear viscoelastic range with the absence of a proper breaking point, confirmed with thixotropy experiments. Two cosmetic active peptides (Trifluoroacetyl tripeptide-2 and Palmitoyl tripeptide-5) were successfully added to the hydrogels and their transdermal permeation was analysed with Franz diffusion cells. The liquid chromatography-mass spectrometry (HPLC-MS) analyses of the withdrawn samples from the receiving solutions showed that Trifluoroacetyl tripeptide-2 permeated in a considerable amount while almost no transdermal permeation of Palmitoyl tripeptide-5 was observed.

Controlled Hydrolysis of Odorants Schiff Bases in Low-Molecular-Weight Gels.

Imines or Schiff bases (SB) are formed by the condensation of an aldehyde or a ketone with a primary amine, with the removal of a water molecule. Schiff bases are central molecules in several biological processes for their ability to form and cleave by small variation of the medium. We report here the controlled hydrolysis of four SBs that may be applied in the fragrance industry, as they are profragrances all containing odorant molecules: methyl anthranilate as primary amine, and four aldehydes (cyclamal, helional, hydroxycitronellal and triplal) that are very volatile odorants. The SB stability was assessed over time by HPLC-MS in neutral or acidic conditions, both in solution and when trapped in low molecular weight gels. Our results demonstrate that it is possible to control the hydrolysis of the Schiff bases in the gel environment, thus tuning the quantity of aldehyde released and the persistency of the fragrance.

L-Dopa in small peptides: an amazing functionality to form supramolecular materials.

l-Dopa (3,4-dihydroxyphenylalanine) is a chiral amino acid generated via biosynthesis from l-tyrosine in plants and some animals. The presence of multiple interacting sites makes l-Dopa a multifunctional building block for the preparation of supramolecular materials. The possibility to form hydrogen bonds and the presence of the aromatic ring allow l-Dopa molecules to interact through a series of non-covalent interactions. The additional presence of the catechol moiety really makes this compound unique: not only does it have implications in the self-assembly process of Dopa itself and with other substrates, but also it highly increases the number of applications of the final material, since it works as an antioxidant, radical trapper, metal chelator, reducing agent and adhesive. l-Dopa and catechol containing derivatives have been extensively introduced inside both synthetic and natural polymers to obtain amazing functional materials. In this review we report the preparation of small peptides containing l-Dopa, focusing on the supramolecular materials that can be obtained with them, ranging from fibrils to fibres, gels, films and coatings, all having the different applications mentioned above and many others.

Elusive π-helical peptide foldamers spotted by chiroptical studies.

A series of oligomers containing alternate l-Ala and pGlu (pyroglutamic acid) both in the L and D form have been prepared and conformationally investigated by X-ray, NMR, UV/ECD, IR/VCD and molecular modelling. X-ray diffraction analysis was possible for the shortest oligomers LL-1 and LD-1. Molecular dynamics simulations of the oligomers demonstrated that the energy landscapes of the LL-series are broad. In contrast, the energy landscapes of the LD-series are characterized by well-defined minima corresponding to specific conformational structures. A single well-defined minimum exists in the energy landscape of the largest oligomer LD-8, corresponding to a precise conformation, characterized by i + 5 →i N-HO[double bond, length as m-dash]C hydrogen bonds, typical of a π-helix. ECD and VCD spectra were measured to identify the chiroptical profiles of the oligomers. The most striking element in the ECD spectra of the LD-series is their exceptionally strong intensity, which confirms that these polypeptides attain a high degree of helical order. VCD spectra for the LD-series are well reproduced by frequency calculations when π-helix folds are employed as input structures, suggesting that a symmetrical VCD couplet around 1720 cm-1 can be taken as the VCD signature of π-helices.

Tuning Mechanical Properties of Pseudopeptide Supramolecular Hydrogels by Graphene Doping.

Supramolecular hydrogels, obtained from small organic molecules, may be advantageous over polymeric ones for several applications, because these materials have some peculiar properties that differentiate them from the traditional polymeric hydrogels, such as elasticity, thixotropy, self-healing propensity, and biocompatibility. We report here the preparation of strong supramolecular pseudopeptide-based hydrogels that owe their strength to the introduction of graphene in the gelling mixture. These materials proved to be strong, stable, thermoreversible and elastic. The concentration of the gelator, the degree of graphene doping, and the nature of the trigger are crucial to get hydrogels with the desired properties, where a high storage modulus coexists with a good thixotropic behavior. Finally, NIH-3T3 cells were used to evaluate the cell response to the presence of the most promising hydrogels. The hydrogels biocompatibility remains good, if a small degree of graphene doping is introduced.

Oxazolidinone-containing pseudopeptides: Supramolecular materials, fibers, crystals, and gels.

The formation of fibers through self-assembly is of particular interest, as fibrous proteins (such as collagen, keratin, actin, and so on) are involved in intra- and extracellular functions. To understand aggregation phenomena, oligopeptides may be designed and prepared either to mimic or to interfere with these processes. In this article, we will demonstrate that the introduction of the 4-methyl-5-carboxy-oxazolidin-2-one (Oxd) moiety inside a peptide chain favors the formation of fiber-like materials organized either in ß-sheets or in supramolecular helices, provided that it is combined with other factors, like π-stacking interactions and intermolecular NH•••OC bonds. The presence of the Oxd moiety is essential for the material formation: when Oxd is replaced with Pro, only liquids or amorphous solids are obtained. Remarkably, some of these molecules are low-molecular-weight gelators, as they induce the formation of both organogel and hydrogels that have been used for several applications.

Synthesis and structure analysis of ferrocene-containing pseudopeptides.

Ferrocene with its aromaticity and facile redox properties is an attractive moiety to be incorporated into functional moieties. Medicinal applications of ferrocene are well known and ferrocene itself shows cytotoxic and antianemic properties. In this article, we will describe the synthesis and the structure analysis of two pseudopeptides containing a ferrocene moiety as N-terminal group. After purification, Fc-l-Phe-d-Oxd-OBn [l-Phel-phenylalanine; d-Oxd(4R,5S)-4-Methyl-5-carboxy-oxazolidin-2-one] appears as bright brown solid that spontaneously forms brown needles. The X-ray diffraction of the crystals shows the presence of strong π interactions between the ferrocenyl moiety and the phenyl rings, while no NH•••OC hydrogen bonds are formed. This result is confirmed by FT-IR and 1 H NMR analysis. In contrast, both FT-IR and 1 H NMR analysis suggest that Fc-(l-Phe-d-Oxd)2 -OBn forms a turn conformation stabilized by intramolecular NH•••OC hydrogen bonds in solution. Chiroptical spectroscopies (ECD and VCD) substantially confirmed the absence of a well-defined folded structure. The presence of the Fc moiety is responsible for specific ECD signals, one of which displayed pronounced temperature dependence and is directly related with the helicity assumed by the Fc core. Solid-state ECD spectra were recorded and rationalized on the basis of the X-ray geometry and quantum-mechanical calculations.

The effect of l-DOPA hydroxyl groups on the formation of supramolecular hydrogels.

Fmoc-l-DOPA-d-Oxd-OH was prepared starting from commercially available l-DOPA. Its gelation ability was tested by comparison with Fmoc-l-Tyr-d-Oxd-OH and Fmoc-l-Phe-d-Oxd-OH using ten different triggers. Among them, only GdL, CaCl2 and ZnCl2 form strong hydrogels with the three gelators. The analysis of the aerogels obtained by freeze drying the hydrogels show that the three gelators always induce the formation of dense networks, which strongly depend on the nature of the gelator. Rheological analysis of these samples demonstrates that stronger gels were obtained using the l-Tyr containing gelator, while the l-DOPA containing hydrogels were characterized by a storage modulus approximately one order of magnitude lower. Finally, the l-Phe containing gelators show a different trend with respect to the other samples depending on the trigger used. All the hydrogels show a thixotropic behaviour at the molecular level. These results indicate that hydrogel formation is sensitive to both the number of the hydroxyl moieties on the aromatic rings and trigger used.

Pseudopeptide-Based Hydrogels Trapping Methylene Blue and Eosin†Y.

We present herein the preparation of four different hydrogels based on the pseudopeptide gelator Fmoc-l-Phe-d-Oxd-OH (Fmoc=fluorenylmethyloxycarbonyl), either by changing the gelator concentration or adding graphene oxide (GO) to the water solution. The hydrogels have been analysed by rheological studies that demonstrated that pure hydrogels are slightly stronger compared to GO-loaded hydrogels. Then the hydrogels efficiency to trap the cationic methylene blue (MB) and anionic eosin Y (EY) dyes has been analyzed. MB is efficiently trapped by both the pure hydrogel and the GO-loaded hydrogel through π-π interactions and electrostatic interactions. In contrast, the removal of the anionic EY is achieved in less satisfactory yields, due to the unfavourable electrostatic interactions between the dye, the gelator and GO.

Hydrogelation Induced by Fmoc-Protected Peptidomimetics.

Four new low molecular weight hydrogelators (LMWGs) have been prepared in multigram scale and their attitude to form hydrogels has been tested. The gelation trigger is pH variation. The resulting gels have been characterized with several techniques: measurement of the melting points (T(gel)), transparency, gelation time, and viscoelastic properties, together with ECD analysis. Among them, Fmoc-L-Tyr-D-Oxd-OH 1 is an excellent gelator that leads to the preparation of strong, transparent, and viscoelastic gels, by pH variation. UV-visible analyses have demonstrated that the gels obtained with the LMWG 1 possess high transparency, with a transmittance up to 25.6% at a wavelength of 600 nm. Results of the amplitude sweep experiments showed that the elastic response component (G') was approximately an order of magnitude larger than the viscous component, indicating an elastic rather than viscous attitude of the gels, confirmed by the frequency independence of G' and G″ values, in the range from 0.1 to 100 rad·s(-1). The thermal behavior of gel obtained from Fmoc-L-Tyr-D-Oxd-OH 1 was characterized performing an "ad hoc" rheological temperature sweep experiment, that indicated that G' remained almost constant from 23 °C up to about 65 °C while G″ increased in the same temperature range. At higher temperatures, both G' and G″ values started to slightly decrease without displaying a crossover point.

α,ε-Hybrid foldamers with 1,2,3-triazole rings: order versus disorder.

Two epimeric series of foldamers characterized by the presence of a repeating α,ε-dipeptide unit have been prepared and characterized by (1)H NMR and ECD spectroscopies together with X-ray diffraction. The first series contains L-Ala and D-4-carboxy-5-methyl-oxazolidin-2-one (D-Oxd). The other series contains L-Ala and L-Oxd. The L,D series of oligomers forms ordered ß-turn foldamers, characterized by a 311 pattern. The L,L series is not ordered. Simulations show that an ordered L,L trimer lies more than 2 kcal/mol higher than the more stable nonfolded extended conformations. Cu(2+) forms complexes with both series but is not able to order the L,L series. Analysis of the EPR spectra shows that the L,D foldamers bear two types of complexation sites that are assigned as a nitrogen donor of the triazole ring and a carboxylate ligand. The L-Ala-D-Oxd-Tri-CO motif may be introduced in any peptide sequence requiring the presence of a stable ß-turn conformations, like in the study of protein-protein interactions.

Peptides and peptidomimetics that behave as low molecular weight gelators.

Gelators may be divided into chemical gels and physical gels: the internal structure of chemical gels is made of chemical bonds, while physical gels are characterized by dynamic cross-links that are constantly created and broken. The gelator present in physical gels may be an inorganic or an organic compound, the latter having a molecular weight of ≤500 amu. These compounds are generally called "low molecular weight gelators" (LMWGs). In this tutorial review we want to focus our attention on short peptides or peptidomimetics that behave as LMWGs. Peptidomimetics are small protein-like molecules designed to mimic natural peptides. To efficiently design a peptidomimetic, local constraints must be introduced into the skeleton, to induce the formation of preferred secondary structures.

In-peptide synthesis of di-oxazolidinone and dehydroamino acid-oxazolidinone motifs as ß-turn inducers.

Small and easy-to-do mimetics of ß-turns are of great interest to interfere with protein-protein recognition events mediated by ß-turn recognition motifs. We propose a straightforward procedure for constraining the conformation of tetrapeptides lacking a pre-formed scaffold. According to the stereochemistry array, N-Ts tetrapeptides including Thr or PhSer (phenylserine) at the positions 2 or 3 gave rise in a single step to the sequences Oxd(2)-Oxd(3) or ΔAbu(2)-Oxd(3) (Oxd, oxazolidin-2-one; ΔAbu, 2,3-dehydro-2-aminobutyric). These pseudo-Pro residues displayed highly constrained ϕ, ψ, and χ dihedral angles, and induced clear ß-turns or inverse turns of type I or II, as determined by extensive spectroscopic and computational analyses.

A peptidic hydrogel that may behave as a "Trojan Horse".

A physical hydrogel prepared with the low-molecular-weight hydrogelator (LMWHG) CH2(C3H6CO-L-Phe-D-Oxd-OH)2 and water/ethanol mixture was applied as a potential "Trojan Horse" carrier into cells. By SEM and XRD analysis we could demonstrate that a fibrous structure is present in the xerogel, making a complex network. The gelator is derived from α-amino acids (Thr, Phe) and a fatty acid (azelaic acid) and is biocompatible: it was dosed to IGROV-1 cells, which internalized it, without significantly affecting the cell proliferation. To check the internalization process by confocal microscopy, fluorescent hydrogels were prepared, introducing the fluorescent dansyl moiety into the mixture.