Electrocatalytic Hydrogen Evolution by Cobalt Complexes with a Redox Non-Innocent Polypyridine Ligand.

Novel cobalt and zinc complexes with the tetradentate ppq (8-(1″,10″-phenanthrol-2″-yl)-2-(pyrid-2'-yl)quinoline) ligand have been synthesized and fully characterized. Electrochemical measurements have shown that the formal monovalent complex [Co(ppq)(PPh3)]+ (2) undergoes two stepwise ligand-based electroreductions in DMF, affording a [Co(ppq)DMF]-1 species. Theoretical calculations have described the electronic structure of [Co(ppq)DMF]-1 as a low-spin Co(II) center coupling with a triple-reduced ppq radical ligand. In the presence of triethylammonium as the proton donor, the cobalt complex efficiently drives electrocatalytic hydrogen evolution with a maximum turnover frequency of thousands per second. A mechanistic investigation proposes an EECC H2-evolving pathway, where the second ligand-based redox process (E), generating the [Co(ppq)DMF]-1 intermediate, initiates proton reduction, and the second proton transfer process (C) is the rate-determining step. This work provides a unique example for understanding the role of redox-active ligands in electrocatalytic H2 evolution by transition metal sites.

Ruthenium Complex-Incorporated Two-Dimensional Metal-Organic Frameworks for Cocatalyst-Free Photocatalytic Proton Reduction from Water.

Ultrathin two-dimensional (2D) nanosheets with efficient light-driven proton reduction activity were obtained through the exfoliation of novel metal-organic frameworks (MOF), which were synthesized by using a bis(4'-carboxy-2,2':6',2″-terpyridine) ruthenium complex as a linker and 3d transition-metal (Mn, Co, Ni, and Zn) anions as nodes. The nanosheet of the Ni2+ node exhibits a photocatalytic hydrogen evolution rate of 923 ± 40 µmol g-1 h-1 at pH = 4.0, without the presence of any cocatalyst or cosensitizer. A combined experimental and theoretical study suggests a reductive quenched pathway for the photocatalytic hydrogen evolution by the nanosheet. The transition-metal nodes at the edge of the nanosheets are proposed as the active sites. Density functional theory (DFT) calculations attributed the different catalytic activities of the nanosheets to the discrepancy of H adsorption free energy at various transition-metal nodes.

Sulfur Coordination Effects on the Stability and Activity of a Ruthenium-Based Water Oxidation Catalyst.

Water oxidation is regarded as the bottleneck of the water splitting and the development of water oxidation catalysts is of importance in the view of reducing reaction barriers and promoting water oxidation efficiency. Recently, the Sun group has disclosed a family of highly active water oxidation catalysts, [Ru(bda)(L)2] (bda2- = 2,2'-bipyridine-6,6'-dicarboxylate; L = N-containing ligands). Herein, we replaced the bda2- ligand with a 2,2'-bipyridine-6,6'-dicarbothioate (bct2-) ligand and prepared a mononuclear ruthenium complex [Ru(bct)(pic)2] (Ru-bct, pic = 4-picoline). Less equatorial ligand distortion is observed for RuII-bct which displays improved stability than RuII-bda. The Ru-bct complex undergoes chemical-structural evolution during electrochemical and chemical oxidation, generating Ru-bda as the intrinsic active species to afford water oxidation. This study provides an example to understand structure-stability-reactivity relationship of molecular water oxidation catalysts.

Mechanism of Water Oxidation Catalyzed by a Mononuclear Iron Complex with a Square Polypyridine Ligand: A DFT Study.

The mononuclear [Cl-FeIII(dpa)-Cl]+ (1Cl) complex containing a square planar tetradentate polypyridine ligand has been reported to catalyze water oxidation in pH = 1 aqueous medium with ceric ammonium nitrate (CAN) as a chemical oxidant. The reaction mechanism of the oxygen evolution driven by this catalyst was investigated by means of density functional calculations. The results showed that one chloride ligand of 1Cl has to exchange with a water molecule to generate 1, [Cl-FeIII(dpa)-OH2]2+, as the starting species of the catalytic cycle. The initial one-electron oxidation of 1 is coupled with the release of two protons, generating [Cl-FeIV(dpa)═O]+ (2). Another one-electron transfer from 2 leads to the formation of an FeV═O complex [Cl-FeV(dpa)═O]2+ (3), which triggers the critical O-O bond formation. The electronic structure of 3 was found to be very similar to that of the high-valent heme-iron center of P450 enzymes, termed Compound I, in which a π-cation radical ligand is believed to support a formal iron(IV)-oxo core. More importantly, 3 and Compound I share the same tendency toward electrophilic reactions. Two competing pathways were suggested for the O-O bond formation based on the present calculations. One is the nitrate nucleophilic attack on the iron(V)-oxo moiety with a total barrier of 12.3 kcal mol-1. In this case, nitrate functions as a co-catalyst for the dioxygen formation. The other is the water nucleophilic attack on iron(V)-oxo with a greater barrier of 16.5 kcal mol-1. In addition, ligand degradation via methyl hydrogen abstraction was found to have a barrier similar to that of the O-O bond formation, while the aromatic carbon hydroxylation has a higher barrier.

Ruthenium catalysts for water oxidation involving tetradentate polypyridine-type ligands.

A series of Ru(II) complexes that behave as water oxidation catalysts were prepared involving a tetradentate equatorial ligand and two 4-substituted pyridines as the axial ligands. Two of these complexes were derived from 2,9-di-(pyrid-2'-yl)-1,10-phenanthroline (dpp) and examine the effect of incorporating electron-donating amino and bulky t-butyl groups on catalytic activity. A third complex replaced the two distal pyridines with N-methylimidazoles that are more electron-donating than the pyridines of dpp and potentially stabilize higher oxidation states of the metal. The tetradentate ligand 2-(pyrid-2'-yl)-6-(1'',10''-phenanthrol-2''-yl)pyridine (bpy-phen), possessing a bonding cavity similar to dpp, was also prepared. The Ru(II) complex of this ligand does not have two rotatable pyridines in the equatorial plane and thus shows different flexibility from the [Ru(dpp)] complexes. All the complexes showed activity towards water oxidation. Investigation of their catalytic behavior and electrochemical properties suggests that they may follow the same catalytic pathway as the prototype [Ru(dpp)pic2](2+) involving a seven-coordinated [Ru(IV)(O)] intermediate. The influence of coordination geometry on catalytic performance is analyzed and discussed.

Light-Driven Proton Reduction in Aqueous Medium Catalyzed by a Family of Cobalt Complexes with Tetradentate Polypyridine-Type Ligands.

A series of tetradentate 2,2':6',2″:6″,2‴-quaterpyridine-type ligands related to ppq (ppq = 8-(1″,10″-phenanthrol-2″-yl)-2-(pyrid-2'-yl)quinoline) have been synthesized. One ligand replaces the 1,10-phenanthroline (phen) moiety of ppq with 2,2'-bipyridine and the other two ligands have a 3,3'-polymethylene subunit bridging the quinoline and pyridine. The structural result is that both the planarity and flexibility of the ligand are modified. Co(II) complexes are prepared and characterized by ultraviolet-visible light (UV-vis) and mass spectroscopy, cyclic voltammetry, and X-ray analysis. The light-driven H2-evolving activity of these Co complexes was evaluated under homogeneous aqueous conditions using [Ru(bpy)3](2+) as the photosensitizer, ascorbic acid as a sacrificial electron donor, and a blue light-emitting diode (LED) as the light source. At pH 4.5, all three complexes plus [Co(ppq)Cl2] showed the fastest rate, with the dimethylene-bridged system giving the highest turnover frequency (2125 h(-1)). Cyclic voltammograms showed a significant catalytic current for H2 production in both aqueous buffer and H2O/DMF medium. Combined experimental and theoretical study suggest a formal Co(II)-hydride species as a key intermediate that triggers H2 generation. Spin density analysis shows involvement of the tetradentate ligand in the redox sequence from the initial Co(II) state to the Co(II)-hydride intermediate. How the ligand scaffold influences the catalytic activity and stability of catalysts is discussed, in terms of the rigidity and differences in conjugation for this series of ligands.

Visible light-driven hydrogen evolution from water catalyzed by a molecular cobalt complex.

An approximately planar tetradentate polypyridine ligand, 8-(1″,10″-phenanthrol-2″-yl)-2-(pyrid-2'-yl)quinoline (ppq), has been prepared by two sequential Friedländer condensations. The ligand readily accommodates Co(II) bearing two axial chlorides, and the resulting complex is reasonably soluble in water. In DMF the complex shows three well-behaved redox waves in the window of 0 to -1.4 V (vs SHE). However in pH 7 buffer the third wave is obscured by a catalytic current at -0.95 V, indicating hydrogen production that appears to involve a proton-coupled electron-transfer event. The complex [Co(ppq)Cl2] (6) in pH 4 aqueous solution, together with [Ru(bpy)3]Cl2 and ascorbic acid as a sacrificial electron donor, in the presence of blue light (λmax = 469 nm) produces hydrogen with an initial TOF = 586 h(-1).

Water oxidation catalyzed by mononuclear ruthenium complexes with a 2,2'-bipyridine-6,6'-dicarboxylate (bda) ligand: how ligand environment influences the catalytic behavior.

A new water oxidation catalyst [Ru(III)(bda)(mmi)(OH2)](CF3SO3) (2, H2bda = 2,2'-bipyridine-6,6'-dicarboxylic acid; mmi = 1,3-dimethylimidazolium-2-ylidene) containing an axial N-heterocyclic carbene ligand and one aqua ligand was synthesized and fully characterized. The kinetics of catalytic water oxidation by 2 were measured using stopped-flow technique, and key intermediates in the catalytic cycle were probed by density functional theory calculations. While analogous Ru-bda water oxidation catalysts [Ru(bda)L2] (L = pyridyl ligands) are supposed to catalyze water oxidation through a bimolecular coupling pathway, our study points out that 2, surprisingly, undergoes a single-site water nucleophilic attack (acid-base) pathway. The diversion of catalytic mechanisms is mainly ascribed to the different ligand environments, from nonaqua ligands to an aqua ligand. Findings in this work provide some critical proof for our previous hypothesis about how alternation of ancillary ligands of water oxidation catalysts influences their catalytic efficiency.

Catalytic water oxidation by mononuclear Ru complexes with an anionic ancillary ligand.

Mononuclear Ru-based water oxidation catalysts containing anionic ancillary ligands have shown promising catalytic efficiency and intriguing properties. However, their insolubility in water restricts a detailed mechanism investigation. In order to overcome this disadvantage, complexes [Ru(II)(bpc)(bpy)OH2](+) (1(+), bpc = 2,2'-bipyridine-6-carboxylate, bpy = 2,2'-bipyridine) and [Ru(II)(bpc)(pic)3](+) (2(+), pic = 4-picoline) were prepared and fully characterized, which features an anionic tridentate ligand and has enough solubility for spectroscopic study in water. Using Ce(IV) as an electron acceptor, both complexes are able to catalyze O2-evolving reaction with an impressive rate constant. On the basis of the electrochemical and kinetic studies, a water nucleophilic attack pathway was proposed as the dominant catalytic cycle of the catalytic water oxidation by 1(+), within which several intermediates were detected by MS. Meanwhile, an auxiliary pathway that is related to the concentration of Ce(IV) was also revealed. The effect of anionic ligand regarding catalytic water oxidation was discussed explicitly in comparison with previously reported mononuclear Ru catalysts carrying neutral tridentate ligands, for example, 2,2':6',2″-terpyridine (tpy). When 2(+) was oxidized to the trivalent state, one of its picoline ligands dissociated from the Ru center. The rate constant of picoline dissociation was evaluated from time-resolved UV-vis spectra.

Water oxidation catalysis: influence of anionic ligands upon the redox properties and catalytic performance of mononuclear ruthenium complexes.

Aiming at highly efficient molecular catalysts for water oxidation, a mononuclear ruthenium complex Ru(II)(hqc)(pic)(3) (1; H(2)hqc = 8-hydroxyquinoline-2-carboxylic acid and pic = 4-picoline) containing negatively charged carboxylate and phenolate donor groups has been designed and synthesized. As a comparison, two reference complexes, Ru(II)(pdc)(pic)(3) (2; H(2)pdc = 2,6-pyridine-dicarboxylic acid) and Ru(II)(tpy)(pic)(3) (3; tpy = 2,2':6',2"-terpyridine), have also been prepared. All three complexes are fully characterized by NMR, mass spectrometry (MS), and X-ray crystallography. Complex 1 showed a high efficiency toward catalytic water oxidation either driven by chemical oxidant (Ce(IV) in a pH 1 solution) with a initial turnover number of 0.32 s(-1), which is several orders of magnitude higher than that of related mononuclear ruthenium catalysts reported in the literature, or driven by visible light in a three-component system with [Ru(bpy)(3)](2+) types of photosensitizers. Electrospray ionization MS results revealed that at the Ru(III) state complex 1 undergoes ligand exchange of 4-picoline with water, forming the authentic water oxidation catalyst in situ. Density functional theory (DFT) was employed to explain how anionic ligands (hqc and pdc) facilitate the 4-picoline dissociation compared with a neutral ligand (tpy). Electrochemical measurements show that complex 1 has a much lower E(Ru(III)/Ru(II)) than that of reference complex 2 because of the introduction of a phenolate ligand. DFT was further used to study the influence of anionic ligands upon the redox properties of mononuclear aquaruthenium species, which are postulated to be involved in the catalysis cycle of water oxidation.

Electrocatalytic CO2 Reduction by Molecular Ruthenium Complexes with Polypyridyl Ligands.

Two series of ruthenium complexes with various polypyridyl ligands have been prepared. One series of complexes (5 examples) are featured with tetradentate polypyridyl ligands and two acetonitrile molecules at the axial positions of the coordination sphere; the other series (3 examples) include combinations of a tridentate polypyridyl ligand, one 2,2'-bipyridine (bpy) or two picolines, and one acetonitrile ligand. All these complexes were fully characterized by their NMR spectra as well as X-ray single crystal structures. Their electronic absorption and redox data were measured and reported. Of the 8 complexes, three candidates effectively catalyze electrochemical CO2 reduction reaction (CO2 RR) in wet acetonitrile medium, generating CO as the major product. All these three catalytically active complexes contain a 2,2':6',2'':6'',2'''-quaterpyridine (qpy) ligand scaffold. A maximum turnover frequency (TOFmax ) of>1000 s-1 was achieved for the electrocatalytic CO2 reduction at a modest overpotential. On the basis of electrochemical and spectroelectrochemical evidences, the CO2 substrate was proposed to bind with the ruthenium center at the two-electron reduced state of the complex and then entered the catalytic cycle.

Synthesis and catalytic water oxidation activities of ruthenium complexes containing neutral ligands.

Two dinuclear and one mononuclear ruthenium complexes containing neutral polypyridyl ligands have been synthesised as pre-water oxidation catalysts and characterised by (1)H and (13)C NMR spectroscopy and ESI-MS. Their catalytic water oxidation properties in the presence of [Ce(NH(4))(2)(NO(3))(6)] (Ce(IV)) as oxidant at pH 1.0 have been investigated. At low concentrations of Ce(IV) (5 mM), high turnover numbers of up to 4500 have been achieved. An (18)O-labelling experiment established that both O atoms in the evolved O(2) originate from water. Combined electrochemical study and electrospray ionisation mass spectrometric analysis suggest that ligand exchange between coordinated 4-picoline and free water produces Ru aquo species as the real water oxidation catalysts.

Nanoencapsulation strategy: enabling electrochemiluminescence of thermally activated delayed fluorescence (TADF) emitters in aqueous media.

A nanoencapsulation strategy is introduced to a state-of-the-art thermally activated delayed fluorescence (TADF) molecule, i.e. 4CzIPN, which ensures the achievement of air-stable, water-soluble TADF nanoparticles featuring efficient TADF property without an unsatisfactory oxygen quenching effect. Accordingly, we report here for the first time the electrochemiluminescence of TADF emitters in aqueous media.

Switching the O-O Bond Formation Pathways of Ru-pda Water Oxidation Catalyst by Third Coordination Sphere Engineering.

Water oxidation is a vital anodic reaction for renewable fuel generation via electrochemical- and photoelectrochemical-driven water splitting or CO2 reduction. Ruthenium complexes, such as Ru-bda family, have been shown as highly efficient water-oxidation catalysts (WOCs), particularly when they undergo a bimolecular O-O bond formation pathway. In this study, a novel Ru(pda)-type (pda2- =1,10-phenanthroline-2,9-dicarboxylate) molecular WOC with 4-vinylpyridine axial ligands was immobilized on the glassy carbon electrode surface by electrochemical polymerization. Electrochemical kinetic studies revealed that this homocoupling polymer catalyzes water oxidation through a bimolecular radical coupling pathway, where interaction between two Ru(pda)-oxyl moieties (I2M) forms the O-O bond. The calculated barrier of the I2M pathway by density-functional theory (DFT) is significantly lower than the barrier of a water nucleophilic attack (WNA) pathway. By using this polymerization strategy, the Ru centers are brought closer in the distance, and the O-O bond formation pathway by the Ru (pda) catalyst is switched from WNA in a homogeneous molecular catalytic system to I2M in the polymerized film, providing some deep insights into the importance of third coordination sphere engineering of the water oxidation catalyst.

Chemical and photochemical water oxidation catalyzed by mononuclear ruthenium complexes with a negatively charged tridentate ligand.

Two mononuclear ruthenium complexes [RuL(pic)3] (1) and [RuL(bpy)(pic)] (2) (H2L = 2,6-pyridinedicarboxylic acid, pic = 4-picoline, bpy =2,2'-bipyridine) have been synthesized and fully characterized. Both complexes could promote water oxidation chemically and photochemically. Compared with other known ruthenium-based water oxidation catalysts using [Ce(NH4)2(NO3)6] (Ce(IV)) as the oxidant in solution at pH 1.0, complex 1 is one of the most active catalysts yet reported with an initial rate of 0.23 turnover s(-1). Under acidic conditions, the equatorial 4-picoline in complex 1 dissociates first. In addition, ligand exchange in 1 occurs when the Ru(III) state is reached. Based on the above observations and MS measurements of the intermediates during water oxidation by 1 using Ce(IV) as oxidant, [RuL(pic)2(H2O)](+) is proposed as the real water oxidation catalyst.

Naphthalimide intercalators with chiral amino side chains: effects of chirality on DNA binding, photodamage and antitumor cytotoxicity.

Several novel heterocyclic-fused naphthalimides intercalators with chiral amino side chains were investigated. Their side chains' chiral configuration determines DNA binding activities in the order: S-enantiomers > R-enantiomers. And their DNA photodamaging activities were in good agreement with their DNA binding constants, the S-enantiomers could photocleave circular supercoiled pBR322 DNA more efficiently than their R-enantiomers. S-enantiomer B(3) could photodamage DNA at 0.2 microM and cleave supercoiled plasmid DNA from form I to form II completely at 50 microM. Almost all of these intercalators showed effective cytoxicities against human lung cancer cells and murine leukemia cells. S-enantiomers showed different antitumor cytotoxicity by comparison with R-enantiomers. This work may provide additional information for the role of amino side chains on intercalators as antitumor agents.

Electrochemically Deposited Nickel Oxide from Molecular Complexes for Efficient Water Oxidation Catalysis.

A facile method for the electrodeposition of amorphous nickel oxyhydroxide is described and discussed in which well-defined nickel complexes with pyridinedimethanol ligands are employed as single-source molecular precursors. No buffering agent is required to assist the anodic deposition process. The deposited nickel oxyhydroxide shows high robustness and efficiency for electrocatalytic water oxidation.

Direct Observation of Structural Evolution of Metal Chalcogenide in Electrocatalytic Water Oxidation.

As one of the most remarkable oxygen evolution reaction (OER) electrocatalysts, metal chalcogenides have been intensively reported during the past few decades because of their high OER activities. It has been reported that electron-chemical conversion of metal chalcogenides into oxides/hydroxides would take place after the OER. However, the transition mechanism of such unstable structures, as well as the real active sites and catalytic activity during the OER for these electrocatalysts, has not been understood yet; therefore a direct observation for the electrocatalytic water oxidation process, especially at nano or even angstrom scale, is urgently needed. In this research, by employing advanced Cs-corrected transmission electron microscopy (TEM), a step by step oxidational evolution of amorphous electrocatalyst CoS x into crystallized CoOOH in the OER has been in situ captured: irreversible conversion of CoS x to crystallized CoOOH is initiated on the surface of the electrocatalysts with a morphology change via Co(OH)2 intermediate during the OER measurement, where CoOOH is confirmed as the real active species. Besides, this transition process has also been confirmed by multiple applications of X-ray photoelectron spectroscopy (XPS), in situ Fourier-transform infrared spectroscopy (FTIR), and other ex situ technologies. Moreover, on the basis of this discovery, a high-efficiency electrocatalyst of a nitrogen-doped graphene foam (NGF) coated by CoS x has been explored through a thorough structure transformation of CoOOH. We believe this in situ and in-depth observation of structural evolution in the OER measurement can provide insights into the fundamental understanding of the mechanism for the OER catalysts, thus enabling the more rational design of low-cost and high-efficient electrocatalysts for water splitting.

Isoquino[4,5-bc]acridines: design, synthesis and evaluation of DNA binding, anti-tumor and DNA photo-damaging ability.

Several novel isoquino[4,5-bc]acridine derivatives have been designed and synthesized. Their DNA-binding, anti-tumor and DNA-photo-damaging properties were investigated. A4 exhibited the highest anti-tumor activities against both A 549 (human lung cancer cell) and P388 (murine leukemia cells). All these compounds were found to be more cytotoxic against P388 than against A549. Under 365-nm light irradiation, A3 damaged plasmid DNA pBR322 at <2 microM and cleaved DNA from form I to 100% form II by 50 microM. The mechanism studies revealed that A3 damaged DNA by electron transfer mechanism and singlet oxygen species.