Effects of pretreatment and air drying temperature on Noni fruit powder.

The plant Morinda citrifolia L. (Noni) has been the subject of several recent research due to its positive impact on the treatment and prevention of a variety of diseases. Noni fruits contain a variety of phytochemicals, including flavonoid, polyphenol, and triterpenoid saponin. This study aimed to determine the best pre-treatment (including blanching, soaking in ascorbic acid solution and metabisulfite solution) and air-drying temperature (50, 60, 70, and 80 °C) to maximize the total polyphenol content (TPC), flavonoid content (TFC), and triterpenoid saponin contents (TSC) of the resultant Noni fruit powder. The results revealed that pre-soaked Noni fruit samples in ascorbic acid or metabisulfite solution before air-drying at 60 °C were beneficial in preserving TPC, TFC, and TSC. TPC, TFC, and TSC losses increased as drying temperatures (70 and 80 °C) rose. The optimum sample was held at five different relative humidity conditions until they attained weight equilibrium. The results indicated that the sorption isotherm curve of the Noni powder was the sigmoid shape and fitted with the BET and GAB models.

Electrosynthesis of electrochemically reduced graphene oxide/polyaniline nanowire/silver nanoflower nanocomposite for development of a highly sensitive electrochemical DNA sensor.

A novel nanostructured electrode material based on electrochemically reduced graphene oxide/polyaniline nanowires/silver nanoflowers (ERGO/PANi NWs/AgNFs) was fabricated site-specifically onto a Pt microelectrode (0.80 mm2 area) using a three-step electrochemical procedure: electrosynthesis of ERGO, electropolymerization of PANi NWs, and electrodeposition of AgNFs. Synergistic and complementary properties of ERGO, PANi NWs and AgNFs, including high electrochemical activity, large surface area, and high biocompatibility, were obtained. Besides, the electrosynthesis method allowed the direct formation of the desired nanomaterial onto the Pt microelectrode, so the adhesion between the sandwich-structured nanocomposite and the electrode surface was also improved. The optimized ERGO/PANi NWs/AgNFs nanocomposite was used for the first time to develop an electrochemical DNA sensor. As a result, the DNA probe immobilization was facilitated and the electrochemical signals of the DNA sensor were enhanced. The detection limit of the DNA sensor was 2.70 × 10-15 M. Moreover, potential miniaturization for fabrication of a lab-on-a-chip system, direct detection, high sensitivity, and good specificity are the advantages of the fabricated DNA sensor.

Graphene Oxide/Polyvinyl Alcohol/Fe3O4 Nanocomposite: An Efficient Adsorbent for Co(II) Ion Removal.

In this work, an effective nanocomposite-based adsorbent directed to adsorb cobalt (Co2+) ion was successfully synthesized from graphene oxide (GO), polyvinyl alcohol (PVA), and magnetite (Fe3O4) nanoparticles via a coprecipitation technique. The synthesized GO/PVA/Fe3O4 nanocomposite was applied for Co2+ ion removal with the optimized working conditions including 100 min of contact time, 0.01 g of adsorbent dosage, pH of 5.2, and 50°C of temperature. The investigation of adsorption kinetics showed that the adsorption of Co2+ ion onto the GO/PVA/Fe3O4 nanocomposite followed the pseudo-second-order kinetic model with the rate constant k2 being 0.0026 (g mg-1·min-1). The Langmuir model is suitable to describe the adsorption of Co2+ ion onto the GO/PVA/Fe3O4 nanocomposite with the maximum sorption capacity (q max) reaching 373.37 mg·g-1. The obtained results also indicated that the GO/PVA/Fe3O4 nanocomposite can adsorb/regenerate for at least 5 cycles with a little reduction in removal efficiency. Therefore, we believe that the GO/PVA/Fe3O4 nanocomposite could be used as a potential adsorbent for heavy metal treatment in terms of high adsorption capacity, fast adsorption rate, and recyclability.