Nonlinear imaging through a Fermat's golden spiral multicore fiber.

We report two-photon lensless imaging through a novel Fermat's golden spiral multicore fiber. This unique layout optimizes the sidelobe levels, field of view, crosstalk, group delay, and mode density to achieve a sidelobe contrast of at least 10.9 dB. We demonstrate experimentally the ability to generate and scan a focal point with femtosecond pulses and perform two-photon imaging.

Single-shot noninterferometric measurement of the phase transmission matrix in multicore fibers.

A simple technique for far-field single-shot noninterferometric determination of the phase transmission matrix of a multicore fiber with over 100 cores is presented. This phase retrieval technique relies on the aperiodic arrangement of the cores.

Bending-induced inter-core group delays in multicore fibers.

We examine the impact of fiber bends on ultrashort pulse propagation in a 169-core multicore fiber (MCF) by numerical simulations and experimental measurements. We show that an L-shaped bend (where only one end of the MCF is fixed) induces significant changes in group delays that are a function of core position but linear along the bending axis with a slope directly proportional to the bending angle. For U- and S-shaped bends (where both ends of the MCF are fixed) the induced refractive index and group delay changes are much smaller than the residual, intrinsic inter-core group delay differences of the unbent MCF. We further show that when used for point-scanning lensless endoscopy with ultrashort pulse excitation, bend-induced group delays in the MCF degrade the point-spread function due to spatiotemporal coupling. Our results show that bend-induced effects in MCFs can be parametrized with only two parameters: the angle of the bend axis and the amplitude of the bend. This remains valid for bend amplitudes up to at least 200 degrees.

Phase retrieval in multicore fiber bundles.

Multicore fiber bundles are widely used in endoscopy due to their miniature size and their direct imaging capabilities. They have recently been used, in combination with spatial light modulators, in various realizations of endoscopy with little or no optics at the distal end. These schemes require characterization of the relative phase offsets between the different cores, typically done using off-axis holography, thus requiring both an interferometric setup and, typically, access to the distal tip. Here we explore the possibility of employing phase retrieval to extract the necessary phase information. We show that in the noise-free case, disordered fiber bundles are superior for phase retrieval over their periodic counterparts, and demonstrate experimentally accurate retrieval of phase information for up to 10 simultaneously illuminated cores. Thus, phase retrieval is presented as a viable alternative for real-time monitoring of phase distortions in multicore fiber bundles.

Widefield lensless endoscopy with a multicore fiber.

We demonstrate pixelation-free real-time widefield endoscopic imaging through an aperiodic multicore fiber (MCF) without any distal opto-mechanical elements or proximal scanners. Exploiting the memory effect in MCFs, the images in our system are directly obtained without any post-processing using a static wavefront correction obtained from a single calibration procedure. Our approach allows for video-rate 3D widefield imaging of incoherently illuminated objects with imaging speed not limited by the wavefront-shaping device refresh rate.

Extended field-of-view in a lensless endoscope using an aperiodic multicore fiber.

We investigate lensless endoscopy using coherent beam combining and aperiodic multicore fibers (MCF). We show that diffracted orders, inherent to MCF with periodically arranged cores, dramatically reduce the field-of-view (FoV), and that randomness in MCF core positions can increase the FoV up to the diffraction limit set by a single fiber core, while maintaining a MCF experimental feasibility. We demonstrate experimentally pixelation-free lensless endoscopy imaging over a 120 µm FoV with an aperiodic MCF designed with widely spaced cores. We show that this system is suitable to perform beam scanning imaging by simply applying a tilt to the proximal wavefront.

Ultrathin endoscopes based on multicore fibers and adaptive optics: a status review and perspectives.

We take stock of the progress that has been made into developing ultrathin endoscopes assisted by wave front shaping. We focus our review on multicore fiber-based lensless endoscopes intended for multiphoton imaging applications. We put the work into perspective by comparing with alternative approaches and by outlining the challenges that lie ahead.

Integrated III-V Photonic Crystal--Si waveguide platform with tailored optomechanical coupling.

Optomechanical systems, in which the vibrations of a mechanical resonator are coupled to an electromagnetic radiation, have permitted the investigation of a wealth of novel physical effects. To fully exploit these phenomena in realistic circuits and to achieve different functionalities on a single chip, the integration of optomechanical resonators is mandatory. Here, we propose a novel approach to heterogeneously integrate arrays of two-dimensional photonic crystal defect cavities on top of silicon-on-insulator waveguides. The optomechanical response of these devices is investigated and evidences an optomechanical coupling involving both dispersive and dissipative mechanisms. By controlling the optical coupling between the waveguide and the photonic crystal, we were able to vary and understand the relative strength of these couplings. This scalable platform allows for an unprecedented control on the optomechanical coupling mechanisms, with a potential benefit in cooling experiments, and for the development of multi-element optomechanical circuits in the framework of optomechanically-driven signal-processing applications.