Planar Chiral Multiple Resonance Thermally Activated Delayed Fluorescence Materials for Efficient Circularly Polarized Electroluminescence.

Chiral boron/nitrogen doped multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters are promising for highly efficient and color-pure circularly polarized organic light-emitting diodes (CP-OLEDs). Herein, we report two pairs of MR-TADF materials (Czp-tBuCzB, Czp-POAB) based on planar chiral paracyclophane with photoluminescence quantum yields of up to 98 %. The enantiomers showed symmetric circularly polarized photoluminescence spectra with dissymmetry factors |gPL | of up to 1.6×10-3 in doped films. Meanwhile, the sky-blue CP-OLEDs with (R/S)-Czp-tBuCzB showed an external quantum efficiency of 32.1 % with the narrowest full-width at half-maximum of 24 nm among the reported CP-OLEDs, while the devices with (R/S)-Czp-POAB displayed the first nearly pure green CP electroluminescence with |gEL | factors at the 10-3 level. These results demonstrate the incorporation of planar chirality into MR-TADF emitter is a reliable strategy for constructing of efficient CP-OLEDs.

Simple Synthesis of Red Iridium(III) Complexes with Sulfur-Contained Four-Membered Ancillary Ligands for OLEDs.

Phosphorescent iridium(III) complexes have been widely researched for the fabrication of efficient organic light-emitting diodes (OLEDs). In this work, three red Ir(III) complexes named Ir-1, Ir-2, and Ir-3, with Ir-S-C-S four-membered framework rings, were synthesized efficiently at room temperature within 5 min using sulfur-containing ancillary ligands with electron-donating groups of 9,10-dihydro-9,9-dimethylacridine, phenoxazine, and phenothiazine, respectively. Due to the same main ligand of 4-(4-(trifluoromethyl)phenyl)quinazoline, all Ir(III) complexes showed similar photoluminescence emissions at 622, 619, and 622 nm with phosphorescence quantum yields of 35.4%, 50.4%, and 52.8%, respectively. OLEDs employing these complexes as emitters with the structure of ITO (indium tin oxide)/HAT-CN (dipyra-zino[2,3-f,2',3'-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile, 5 nm)/TAPC (4,4'-cyclohexylidenebis[N,N-bis-(4-methylphenyl)aniline], 40 nm)/TCTA (4,4″,4″-tris(carbazol-9-yl)triphenylamine, 10 nm)/Ir(III) complex (10 wt%): 2,6DCzPPy (2,6-bis-(3-(carbazol-9-yl)phenyl)pyridine, 10 nm)/TmPyPB (1,3,5-tri(mpyrid-3-yl-phenyl)benzene, 50 nm)/LiF (1 nm)/Al (100 nm) achieved good performance. In particular, the device based on complex Ir-3 with the phenothiazine unit showed the best performance with a maximum brightness of 22,480 cd m-2, a maximum current efficiency of 23.71 cd A-1, and a maximum external quantum efficiency of 18.1%. The research results suggest the Ir(III) complexes with a four-membered ring Ir-S-C-S backbone provide ideas for the rapid preparation of Ir(III) complexes for OLEDs.

Thermally Activated Delayed Fluorescence Materials: Towards Realization of High Efficiency through Strategic Small Molecular Design.

Thermally activated delayed fluorescence (TADF) is one of the most intriguing and promising discoveries towards realization of highly-efficient organic light emitting diodes (OLED) utilizing small molecules as emitters. It has the capability of manifesting all excitons generated during the electroluminescent processes, consequently achieving 100 % of internal quantum efficiency. Since the report of the first efficient OLED based on a TADF small molecule in 2012 by Adachi et al., the quest for optimal TADF materials for OLED application has never stopped. Various TADF molecules bearing different design concepts and strategies have been designed and produced, with the aim to boost the overall performances of corresponding OLEDs. In this minireview, the general principles of TADF molecular design based on three basic categories of TADF species: twisted intramolecular charge transfer (TICT), through-space charge transfer (TSCT) and multi-resonance induced TADF (MR-TADF) are discussed in detail. Several key aspects with respect to each category, as well as some effective methods to enhance the efficiency of TADF materials and corresponding OLEDs from the molecular engineering perspectives, are summarized and discussed to exhibit a general landscape of TADF molecular design to a wide variety of scientific researchers within this particular disciplinary area.

Chiral Thermally Activated Delayed Fluorescence Emitters-Based Efficient Circularly Polarized Organic Light-Emitting Diodes Featuring Low Efficiency Roll-Off.

Direct emission of circularly polarized light from organic light-emitting diodes (OLEDs) is a research hotspot as it could increase the efficiency and significantly simplify device architecture of OLED-based 3D displays. In this study, R/S-OBS-Cz and R/S-OBS-TCz with axial chirality were efficiently prepared by using a stable chiral octahydro-binaphthol unit, carbazole/3,6-ditert-butylcarbazole donors, and a 5,5,10,10-tetraoxide acceptor. The chiral unit-acceptor-donor structure provides them not only thermally activated delayed fluorescence (TADF) characteristics with minor singlet-triplet energy gaps of 0.04 and 0.05 eV but also obvious circularly polarized photoluminescence (CPPL) phenomenon with dissymmetry factors of 8.7 × 10-4 and 6.4 × 10-4 in codoped films. Meanwhile, the CP-OLEDs prepared by enantiomers exhibit good device performances with the maximum external quantum efficiency reaching 20.3% and ideal efficiency roll-off as well as obvious CPEL properties with a |gEL| factor up to 1.0 × 10-3.

Axially Chiral Biphenyl Compound-Based Thermally Activated Delayed Fluorescent Materials for High-Performance Circularly Polarized Organic Light-Emitting Diodes.

To boost intrinsic circularly polarized luminescence (CPL) properties of chiral emitters, an axially chiral biphenyl unit is inlaid in thermally activated delayed fluorescent (TADF) skeleton, urging the participation of chiral source in frontier molecular orbital distributions. A pair of enantiomers, (R)-BPPOACZ and (S)-BPPOACZ, containing the cyano as electron-withdrawing moieties and carbazole and phenoxazine as electron-donating units are synthesized and separated. The circularly polarized TADF enantiomers exhibit both high photoluminescence quantum yield of 86.10% and excellent CPL activities with maximum dissymmetry factor |g PL| values of almost 10-2 in solution and 1.8 × 10-2 in doped film, which are among the best values of previously reported small chiral organic materials. Moreover, the circularly polarized organic light-emitting diodes based on the TADF enantiomers achieve the maximum external quantum efficiency of 16.6% with extremely low efficiency roll-off. Obvious circularly polarized electroluminescence signals with |g EL| values of 4 × 10-3 are also recorded.

Two platinum(ii) complexes with a 4-phenyl-4H-1,2,4-triazole derivative as an ancillary ligand for efficient green OLEDs.

Two new cyclometalated platinum(ii) complexes ((TN3T)Pt(dptp), (4tfmppy)Pt(dptp)) with 2',6'-bis(trifluoromethyl)-2,3'-bipyridine (TN3T) and 4-trifluoromethylphenylpyridine (4tfmppy) as the cyclometalated ligands and the nitrogen heterocycle 2-(4,5-diphenyl-4H-1,2,4-triazol-3-yl)phenol (dptp) as the ancillary ligand were developed. Both complexes are green phosphors with high photoluminescence quantum efficiency yields (λmax = 532 nm, Φp = 65% for (TN3T)Pt(dptp) and λmax = 502 nm, Φp = 71% for (4tfmppy)Pt(dptp)) in CH2Cl2 solutions at room temperature, respectively. Organic light-emitting diodes (OLEDs) with single-emitting layer and double-emitting layer structures were fabricated with good performances. Particularly, the double-emitting layer device D2 based on the complex (4tfmppy)Pt(dptp) with 6 wt% doped concentration shows superior performances with a maximum EQE of 26.90% with mild efficiency roll-off. This study demonstrates that the ancillary ligand attached with a 4-phenyl-4H-1,2,4-triazole group could facilitate charge trapping across the bulk of the device for efficient OLEDs.