The legacy environmental footprints of manufactured capital.

The foundations of today's societies are provided by manufactured capital accumulation driven by investment decisions through time. Reconceiving how the manufactured assets are harnessed in the production-consumption system is at the heart of the paradigm shifts necessary for long-term sustainability. Our research integrates 50 years of economic and environmental data to provide the global legacy environmental footprint (LEF) and unveil the historical material extractions, greenhouse gas emissions, and health impacts accrued in today's manufactured capital. We show that between 1995 and 2019, global LEF growth outpaced GDP and population growth, and the current high level of national capital stocks has been heavily relying on global supply chains in metals. The LEF shows a larger or growing gap between developed economies (DEs) and less-developed economies (LDEs) while economic returns from global asset supply chains disproportionately flow to DEs, resulting in a double burden for LDEs. Our results show that ensuring best practice in asset production while prioritizing well-being outcomes is essential in addressing global inequalities and protecting the environment. Achieving this requires a paradigm shift in sustainability science and policy, as well as in green finance decision-making, to move beyond the focus on the resource use and emissions of daily operations of the assets and instead take into account the long-term environmental footprints of capital accumulation.

Traded Plastic, Traded Impacts? Designing Counterfactual Scenarios to Assess Environmental Impacts of Global Plastic Waste Trade.

The global trade of plastic waste has raised environmental concerns, especially regarding pollution in waste-importing countries. However, the overall environmental contribution remains unclear due to uncertain treatment shares between handling plastic waste abroad and domestically. Here, we conduct a life cycle assessment of global plastic waste trade in 2022 across 18 countries and six plastic waste types, alongside three "nontrade" counterfactual scenarios. By considering the required cycling rate, which balances importers' costs and recycling revenues, we find that the trade resulted in lower environmental impacts than treating domestically with the average treatment mix. The trade scenario alone reduced climate change impact by 2.85 million tonnes of CO2 equivalent and mitigated damages to ecosystem quality, human health, and resource availability by 12 species-years, 6200 disability-adjusted life years (DALYs), and 1.4 billion United States dollars (USD in 2013), respectively. These results underscore the significance of recognizing plastic waste trade as a pivotal factor in regulating global secondary plastic production when formulating a global plastics treaty.

Assessing the European Electric-Mobility Transition: Emissions from Electric Vehicle Manufacturing and Use in Relation to the EU Greenhouse Gas Emission Targets.

The European Union (EU) has set a 37.5% GHG reduction target in 2030 for the mobility sector, relative to 1990 levels. This requires increasing the share of zero-emission passenger vehicles, mainly in the form of electric vehicles (EVs). This study calculates future GHG emissions related to passenger vehicle manufacturing and use based on stated policy goals of EU Member States for EV promotion. Under these policies, by 2040 the stock of EVs would be about 73 times larger than those of 2020, contributing to a cumulative in-use emission reduction of 2.0 gigatons CO2-eq. Nevertheless, this stated EV adoption will not be sufficiently fast to reach the EU's GHG reduction targets, and some of the GHG environmental burdens may be shifted to the EV battery manufacturing countries. To achieve the 2030 reduction targets, the EU as a whole needs to accelerate the phase-out of internal combustion engine vehicles and transit to e-mobility at the pace of the most ambitious Member States, such that EVs can comprise at least 55% of the EU passenger vehicle fleet in 2030. An accelerated decarbonization of the electricity system will become the most critical prerequisite for minimizing GHG emissions from both EV manufacturing and in-use stages.

Offshore Wind Energy and Marine Biodiversity in the North Sea: Life Cycle Impact Assessment for Benthic Communities.

Large-scale offshore wind energy developments represent a major player in the energy transition but are likely to have (negative or positive) impacts on marine biodiversity. Wind turbine foundations and sour protection often replace soft sediment with hard substrates, creating artificial reefs for sessile dwellers. Offshore wind farm (OWF) furthermore leads to a decrease in (and even a cessation of) bottom trawling, as this activity is prohibited in many OWFs. The long-term cumulative impacts of these changes on marine biodiversity remain largely unknown. This study integrates such impacts into characterization factors for life cycle assessment based on the North Sea and illustrates its application. Our results suggest that there are no net adverse impacts during OWF operation on benthic communities inhabiting the original sand bottom within OWFs. Artificial reefs could lead to a doubling of species richness and a two-order-of-magnitude increase of species abundance. Seabed occupation will also incur in minor biodiversity losses in the soft sediment. Our results were not conclusive concerning the trawling avoidance benefits. The developed characterization factors quantifying biodiversity-related impacts from OWF operation provide a stepping stone toward a better representation of biodiversity in life cycle assessment.

Opportunities and risks of internet of things (IoT) technologies for circular business models: A literature review.

In recent years, circular business models (CBM) have become an inevitable requirement to foster improvements in environmental performance. However, the current literature rarely discusses the link between Internet of Things (IoT) and CBM. This paper first identifies four IoT capabilities including monitoring, tracking, optimization and design evolution for improving CBM performance based on the ReSOLVE framework. In a second step, a systematic literature review using the PRISMA approach analyzes how these capabilities contribute to 6 R and CBM through the CBM-6R and CBM-IoT cross-section heatmaps and relationship frameworks, followed by assessing the quantitative impacts of IoT on potential energy saving in CBM. Finally, challenges are analyzed for the realization of IoT-enabled CBM. The results show that the assessments of Loop and Optimize business models dominate current studies. IoT plays a significant role in these business models respectively through tracking, monitoring and optimization capabilities. While (quantitative) case studies for Virtualize, Exchange and Regenerate CBM are substantially needed. IoT holds the potential to reduce energy consumption by around 20-30% for referenced applications in the literature. However, the IoT hardware, software and protocol energy consumption, interoperability, security and financial investment might become main obstacles for the wider use of IoT in CBM.

Biodiversity Loss from Freshwater Use for China's Electricity Generation.

Electricity generation has two major, under-investigated impacts on freshwater biodiversity due to its water use: the consumption of freshwater and thermal emissions to freshwater. Here, we analyze the spatiotemporal freshwater biodiversity impacts of China's electric power system and the driving factors for these impacts. We show that between 2008 and 2017, the freshwater consumption of electricity generation peaked in 2013 (13.6 Gm3). Meanwhile, the freshwater consumption factor of China's electricity generation decreased from 3.2 to 2.0 L/kWh. However, due to increasing thermal emissions, the biodiversity loss via freshwater use increased from 1.1 × 108 in 2008 to 1.6 × 108 PDF m3 year. The overall biodiversity loss per unit of electricity generation decreased from 3.2 × 10-5 to 2.5 × 10-5 PDF m3 year/kWh. Biodiversity loss from thermal pollution is 60% higher than that driven by water consumption. Electricity transmission results in the shifting of biodiversity impacts across regions. The results show that 15% of total biodiversity loss was embedded in transmission networks. In terms of electrical power system drivers of biodiversity loss, the total generation was the main driving factor of the increase in loss (rather than shifts in generation type, for example). Our results indicate the necessity of assessing the biodiversity impacts of electricity generation and incorporating them into energy system planning.

Global Human Consumption Threatens Key Biodiversity Areas.

Key biodiversity areas (KBAs) are critical regions for preserving global biodiversity. KBAs are identified by their importance to biodiversity rather than their legal status. As such, KBAs are often under pressure from human activities. KBAs can encompass many different land-use types (e.g., cropland, pastures) and land-use intensities. Here, we combine a global economic model with spatial mapping to estimate the biodiversity impacts of human land use in KBAs. We find that global human land use within KBAs causes disproportionate biodiversity losses. While land use within KBAs accounts for only 7% of total land use, it causes 16% of the potential global plant loss and 12% of the potential global vertebrate loss. The consumption of animal products accounts for more than half of biodiversity loss within KBAs, with housing the second largest at around 10%. Bovine meat is the largest single contributor to this loss, at around 31% of total biodiversity loss. In terms of land use, lightly grazed pasture contributes the most, accounting for around half of all potential species loss. This loss is concentrated mainly in middle- and low-income regions with rich biodiversity. International trade is an important driver of loss, accounting for 22-29% of total potential plant and vertebrate loss. Our comprehensive global, trade-linked analysis provides insights into maintaining the integrity of KBAs and global biodiversity.

Environmental Impacts of Global Offshore Wind Energy Development until 2040.

Continuous reduction in the levelized cost of energy is driving the rapid development of offshore wind energy (OWE). It is thus important to evaluate, from an environmental perspective, the implications of expanding OWE capacity on a global scale. Nevertheless, this assessment must take into account various scenarios for the growth of different OWE technologies in the near future. To evaluate the environmental impacts of future OWE development, this paper conducts a prospective life cycle assessment (LCA) including parameterized supply chains with high technology resolution. Results show that OWE-related environmental impacts, including climate change, marine ecotoxicity, marine eutrophication, and metal depletion, are reduced by ∼20% per MWh from 2020 to 2040 due to various developments including size expansion, lifetime extension, and technology innovation. At the global scale, 2.6-3.6 Gt CO2 equiv of greenhouse gas emissions are emitted cumulatively due to OWE deployment from 2020 to 2040. The manufacturing of primary raw materials, such as steel and fibers, is the dominant contributor to impacts. Overall, 6-9% of the cumulative OWE-related environmental impacts could be reduced by end-of-life (EoL) recycling and the substitution of raw materials.

Provincial and sector-level material footprints in China.

High-income countries often outsource material demands to poorer countries along with the associated environmental damage. This phenomenon can also occur within (large) countries, such as China, which was responsible for 24 to 30% of the global material footprint (MF) between 2007 and 2010. Understanding the distribution and development of China's MF is hence critical for resource efficiency and circular economy ambitions globally. Here we present a comprehensive analysis of China's MF at the provincial and sectoral levels. We combine provincial-level input-output data with sector- and province-specific trade data, detailed material extraction data, and the global input-output database EXIOBASE. We find that some provinces have MFs equivalent to medium-sized, high-income countries and limited evidence of material decoupling. Lower-income regions with high levels of material extraction can have an MF per capita as large as developed provinces due to much higher material intensities. The higher-income south-coastal provinces have lower MF per capita than equally developed provinces. This finding relates partly to differences in economic structure but indicates the potential for improvement across provinces. Investment via capital formation is up to 4 times more resource-intensive than consumption and drives 49 to 86% of provincial-level MFs (the Organisation for Economic Co-operation and Development average is 37%). Resource-efficient production, efficient use of capital goods/infrastructure, and circular design are essential for reductions in China's MF. Policy efforts to shift to a high-quality development model may reduce material intensities, preferably while avoiding the further outsourcing of high-intensity activities to other provinces or lower-income countries.

Improving Subnational Input-Output Analyses Using Regional Trade Data: A Case-Study and Comparison.

Environmentally extended input-output analysis (EE-IO) is widely used for evaluating environmental performance (i.e., footprint) at a national level. Many studies have extended their analyses to the subnational level to guide regional policies. One promising method is to embed nationally disaggregated input-output tables, e.g., nesting a provincial level table, into a global multiregional input-output table. However, a widely used approach to environmental assessment generally disaggregates the trade structure at the national level to the provincial level using the same proportions (proportionality assumption). This means that the subnational spatial heterogeneities on international trade are not fully captured. By calculating the Chinese provincial material footprint (MF) based on two approaches-the proportionality assumption and the actual customs statistics-in the same framework, we evaluate the quantitative differences when the proportionality assumption is addressed. By computing MF for 23 aggregated resources across 30 Chinese provinces, our results show for countries with large material flows like China, estimating subnational-level international trade by proportionality assumption may lead to significant differences in material flows at both the disaggregated and aggregated levels. An important follow-up question is whether these differences are also relevant for other footprints.

Evaluating the environmental impacts of dietary recommendations.

Dietary choices drive both health and environmental outcomes. Information on diets come from many sources, with nationally recommended diets (NRDs) by governmental or similar advisory bodies the most authoritative. Little or no attention is placed on the environmental impacts within NRDs. Here we quantify the impact of nation-specific NRDs, compared with an average diet in 37 nations, representing 64% of global population. We focus on greenhouse gases (GHGs), eutrophication, and land use because these have impacts reaching or exceeding planetary boundaries. We show that compared with average diets, NRDs in high-income nations are associated with reductions in GHG, eutrophication, and land use from 13.0 to 24.8%, 9.8 to 21.3%, and 5.7 to 17.6%, respectively. In upper-middle-income nations, NRDs are associated with slight decrease in impacts of 0.8-12.2%, 7.7-19.4%, and 7.2-18.6%. In poorer middle-income nations, impacts increase by 12.4-17.0%, 24.5-31.9%, and 8.8-14.8%. The reduced environmental impact in high-income countries is driven by reductions in calories (∼54% of effect) and a change in composition (∼46%). The increased environmental impacts of NRDs in low- and middle-income nations are associated with increased intake in animal products. Uniform adoption of NRDs across these nations would result in reductions of 0.19-0.53 Gt CO2 eq⋅a-1, 4.32-10.6 Gt [Formula: see text] eq⋅a-1, and 1.5-2.8 million km2, while providing the health cobenefits of adopting an NRD. As a small number of dietary guidelines are beginning to incorporate more general environmental concerns, we anticipate that this work will provide a standardized baseline for future work to optimize recommended diets further.

Going Global to Local: Connecting Top-Down Accounting and Local Impacts, A Methodological Review of Spatially Explicit Input-Output Approaches.

Environmentally Extended Input-Output Databases (EEIOs) provide an effective tool for assessing environmental impacts around the world. These databases have yielded many scientific and policy relevant insights, especially through the national accounting of impacts embodied in trade. However, most approaches average out the spatial variation in different factors, usually at the level of the nation, but sometimes at the subnational level. It is a natural next step to connect trade with local environmental impacts and local consumption. Due to investments in earth observation many new data sets are now available, offering a huge potential for coupling environmental data sets with economic models such as Multi-Region Input-Output (MRIO) models. A key tool for linking these scales are Spatially Explicit Input-Output (SIO) models, which provide both demand and supply perspectives by linking producers and consumers. Here we define an SIO model as a model having a resolution greater than the underlying input-output transaction matrix. Given the increasing interest in this approach, we present a timely review of the methods used, insights gained, and limitations of various approaches for integrating spatial data in input-output modeling. We highlight the evolution of these approaches, and review the methodological approaches used in SIO models so far. We investigate the temporal and spatial resolution of such approaches and analyze the general advantages and limitations of the modeling framework. Finally, we make suggestions for the future development of SIO models.

Scenarios for Demand Growth of Metals in Electricity Generation Technologies, Cars, and Electronic Appliances.

This study provides scenarios toward 2050 for the demand of five metals in electricity production, cars, and electronic appliances. The metals considered are copper, tantalum, neodymium, cobalt, and lithium. The study shows how highly technology-specific data on products and material flows can be used in integrated assessment models to assess global resource and metal demand. We use the Shared Socio-economic Pathways as implemented by the IMAGE integrated assessment model as a starting point. This allows us to translate information on the use of electronic appliances, cars, and renewable energy technologies into quantitative data on metal flows, through application of metal content estimates in combination with a dynamic stock model. Results show that total demand for copper, neodymium, and tantalum might increase by a factor of roughly 2 to 3.2, mostly as a result of population and GDP growth. The demand for lithium and cobalt is expected to increase much more, by a factor 10 to more than 20, as a result of future (hybrid) electric car purchases. This means that not just demographics, but also climate policies can strongly increase metal demand. This shows the importance of studying the issues of climate change and resource depletion together, in one modeling framework.

Do Methodological Choices in Environmental Modeling Bias Rebound Effects? A Case Study on Electric Cars.

Improvements in resource efficiency often underperform because of rebound effects. Calculations of the size of rebound effects are subject to various types of bias, among which methodological choices have received particular attention. Modellers have primarily focused on choices related to changes in demand, however, choices related to modeling the environmental burdens from such changes have received less attention. In this study, we analyze choices in the environmental assessment methods (life cycle assessment (LCA) and hybrid LCA) and environmental input-output databases (E3IOT, Exiobase and WIOD) used as a source of bias. The analysis is done for a case study on battery electric and hydrogen cars in Europe. The results describe moderate rebound effects for both technologies in the short term. Additionally, long-run scenarios are calculated by simulating the total cost of ownership, which describe notable rebound effect sizes-from 26 to 59% and from 18 to 28%, respectively, depending on the methodological choices-with favorable economic conditions. Relevant sources of bias are found to be related to incomplete background systems, technology assumptions and sectorial aggregation. These findings highlight the importance of the method setup and of sensitivity analyses of choices related to environmental modeling in rebound effect assessments.

Price corrected domestic technology assumption--a method to assess pollution embodied in trade using primary official statistics only. With a case on CO2 emissions embodied in imports to Europe.

Environmentally extended input output (EE IO) analysis is increasingly used to assess the carbon footprint of final consumption. Official EE IO data are, however, at best available for single countries or regions such as the EU27. This causes problems in assessing pollution embodied in imported products. The popular "domestic technology assumption (DTA)" leads to errors. Improved approaches based on Life Cycle Inventory data, Multiregional EE IO tables, etc. rely on unofficial research data and modeling, making them difficult to implement by statistical offices. The DTA can lead to errors for three main reasons: exporting countries can have higher impact intensities; may use more intermediate inputs for the same output; or may sell the imported products for lower/other prices than those produced domestically. The last factor is relevant for sustainable consumption policies of importing countries, whereas the first factors are mainly a matter of making production in exporting countries more eco-efficient. We elaborated a simple correction for price differences in imports and domestic production using monetary and physical data from official import and export statistics. A case study for the EU27 shows that this "price-adjusted DTA" gives a partial but meaningful adjustment of pollution embodied in trade compared to multiregional EE IO studies.

Electric vehicle batteries alone could satisfy short-term grid storage demand by as early as 2030.

The energy transition will require a rapid deployment of renewable energy (RE) and electric vehicles (EVs) where other transit modes are unavailable. EV batteries could complement RE generation by providing short-term grid services. However, estimating the market opportunity requires an understanding of many socio-technical parameters and constraints. We quantify the global EV battery capacity available for grid storage using an integrated model incorporating future EV battery deployment, battery degradation, and market participation. We include both in-use and end-of-vehicle-life use phases and find a technical capacity of 32-62 terawatt-hours by 2050. Low participation rates of 12%-43% are needed to provide short-term grid storage demand globally. Participation rates fall below 10% if half of EV batteries at end-of-vehicle-life are used as stationary storage. Short-term grid storage demand could be met as early as 2030 across most regions. Our estimates are generally conservative and offer a lower bound of future opportunities.

Impact assessment of the EU import ban on Indonesian palm oil: Using environmental extended multi-scale MRIO.

Under the Renewable Energy Directive (RED) II, the EU will phase out the use of palm oil for biodiesel feedstock. Environmental concerns are the main reasons for the EU to implement this initiative. This study analyzes the economic and environmental impact of EU import ban to Indonesia at provincial level, using 2 scenarios (a direct and direct-indirect import ban). The analysis is performed using a global-subnational Multi-Regional Input-Output (MRIO) with environmental extensions. This study shows that a direct (combined) import ban of palm oil by the EU will reduce Indonesia's GDP by -0.2 % (-0.26 %) and employment by -0.12 % (-0.54 %) from baseline. At provincial level, Riau, North Sumatra, Lampung, Central Kalimantan and South Kalimantan experience the highest impact on their domestic product (more than -0.5 %). Under a direct import ban, job losses mostly happen in outside Java (96.26 %) and in the oilseeds sector (75.21 %). Low and middle skilled jobs decline more than high skilled jobs and count for 95 % of the total loss. This study also shows that a direct (combined) import ban reduces national GHG emissions by -0.19 % (-0.24 %) and total land use by -0.48 % (-0.6 %). Potential carbon sequestration can be 34.55 (42.27) million tons C equivalent to 149.74 (182.67) million tons CO2e under assumption a full rewilding from the reduction of land use in oilseed. Our study shows that an EU import ban on Indonesian palm oil has relatively small economic and environmental impacts at national and provincial level. Yet, this policy can create potential carbon sequestration that can absorb CO2 by vegetation and soil.

A global overview of developments of urban and rural household GHG footprints from 2005 to 2015.

Household greenhouse-gas footprints (HGFs) are an important source of global emissions but can vary widely between urban and rural areas. These differences are important during the ongoing rapid, global, urbanization process. We provide a global overview of HGFs considering this urban-rural divide. We include 16 global regions, representing 80% of HGFs and analyze the drivers of urban and rural HGFs between 2005 and 2015. We do this by linking multi-regional input-output (MRIO) tables with household consumption surveys (HCSs) from 43 regions. Urban HGFs from high-income regions continue to dominate, at 75% of total HGFs over 2010-2015. However, we find a significant increase of rural HGFs (at 1% yr-1), reflecting a convergent trend between urban and rural HGFs. High-income regions were responsible for the majority of urban HGFs (USA: 27.8% and EU: 18.7% in 2015), primarily from transport and services, while rural HGFs were predominately driven in emerging regions (China: 24% and India: 21.8% in 2015) mainly driven by food and housing. We find that improving emission intensities do not offset the increase in HGFs from increasing consumption and population during the period. A broad transition of expenditure from food to housing in rural areas and to transport in urban areas highlights the importance of reducing the emission intensities of food, housing, and transportation. Counterintuitively, urbanization increased HGFs in emerging regions, resulting in a >1% increase in China, Indonesia, India and Mexico over the period, due to large migrations of people moving from rural to urban areas.

An overview of the waste hierarchy framework for analyzing the circularity in construction and demolition waste management in Europe.

The construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and waste management system in the construction sector to a level of high circularity. Based on the theory of circular economy, a new paradigm called waste hierarchy was introduced in the EU Waste Framework Directive. This work uses the framework of the waste hierarchy to analyze the practice of construction and demolition waste (CDW) management in Europe. We explore the evolution of the waste hierarchy in Europe and how it compares with the circular economy. Then, based on the framework, we analyze the performance of CDW management in each EU member state. Innovative treatment methods of CDW, focusing on waste concrete, is investigated. This brings insight into optimizing and upgrading the CDW management in light of advanced technologies and steering the pathway for transitioning the EU towards a circular society.

Assessing China's potential for reducing primary copper demand and associated environmental impacts in the context of energy transition and "Zero waste" policies.

To conserve resources and enhance the environmental performance, China has launched the "Zero waste" concept, focused on reutilization of solid waste and recovery of materials, including copper. Although several studies have assessed the copper demand and recycling, there is a lack of understanding on how different waste management options would potentially reduce primary copper demand and associated environmental impacts in China in the context of energy transition. This study addresses this gap in view of a transition to low-carbon energy system and the optimization of copper waste management combining MFA and LCA approaches. Six types of waste streams (C&DW, ELV, WEEE, IEW, MSW, ICW) are investigated in relation to various "Zero waste" strategies including reduction, reuse (repair, remanufacturing or refurbishment), recycling and transition from informal to formal waste management. Under present Chinese policies, reuse and recycling of copper containing products will lead to a somewhat lower dependency on primary copper in 2100 (11187Gg), as well as lower total GHG emissions (64869 Gg CO2-eq.) and cumulative energy demand (1.18x10^12 MJ). Maximizing such "Zero waste" options may lead to a further reduction, resulting in 65% potential reduction of primary copper demand, around 55% potential reduction of total GHG emissions and total cumulative energy demand in 2100. Several policy actions are proposed to provide insights into future waste management in China as well as some of the challenges involved.