Measurement of the three-axis vibration, temperature, and relative humidity profiles of commercial transport trailers for pigs.

The objective of this study was to collect and interpret three-axis acceleration, temperature, and relative humidity data from six locations within commercial transport trailers shipping market-weight pigs. Transport was observed in Kansas (n = 15) and North Carolina (n = 20). Prior to loading, three-axis accelerometers were affixed to six locations on the trailers: top fore (TF), top center (TC), top aft (TA), bottom fore (BF), bottom center (BC), and bottom aft (BA) compartments. Data were post-processed to calculate root-mean-square (RMS) accelerations and vibration dose values (VDV) in the vertical direction and the horizontal plane. These values were compared with exposure action values (EAV) and exposure limit values (ELV), vibration levels deemed uncomfortable and potentially dangerous to humans. Additionally, RMS and VDV were compared among the trailer compartments. The vertical RMS accelerations for all compartments exceeded the EAV for loads measured in Kansas, and for the majority of the compartments measured in North Carolina. Many compartments, specifically the BA compartment from all trips, exceeded the vertical ELV. Regardless of where the data were collected, fewer compartments exceeded the EAV in the horizontal orientation. Only BA compartments exceeded the ELV in the horizontal orientation. There were Area × Level interactions for vertical and horizontal RMS and VDV (P < 0.01). The BF compartment had a greater vertical RMS value than the TF, TC, and BC (P < 0.02) compartments, but did not differ (P = 0.06) from the TA compartment. The vertical RMS of the TA compartment did not differ from the TF, TC, and BC compartments (P > 0.13). The BF compartment had a greater (P = 0.02) vertical VDV value than the TC location, but did not differ from the other locations (P > 0.16). All other locations did not differ in vertical VDV (P > 0.12). The BF compartment had greater horizontal RMS than the TC and TA compartments (P < 0.01), but did not differ from TF and BC compartments (P > 0.12). All other compartments did not differ in horizontal RMS (P > 0.34). All compartments, aside from the BA compartment, did not differ in horizontal VDV (P > 0.19). Vibration analyses indicated the BA compartment had the greatest vertical and horizontal vibrations and a large percentage of the compartments exceed the EAV and ELV, which indicated pigs may have experienced uncomfortable trips that could cause discomfort or fatigue.

Effects of quality grade and intramuscular location on beef semitendinosus muscle fiber characteristics, NADH content, and color stability.

The objective of this study was to determine the impact of quality grade and steak location on color stability of semitendinosus (ST) steaks during a 9-d refrigerated study. Twenty-one ST muscles (12 Choice and 9 Select) were purchased from a commercial beef packing plant and fabricated into twelve 2.54-cm thick steaks per muscle. Steaks 1, 6, and 12 were designated for immunohistochemistry while remaining steak locations of proximal (steaks 2 to 4), middle (5 to 8), and distal (9 to 11) were randomly assigned to 0, 4, or 9 d of simulated retail display. Surface color attributes of day-9 steaks were recorded daily by a visual color panel and spectrophotometer. On days 0, 4, and 9 of display, steaks were analyzed for metmyoglobin reducing ability (MRA) and oxygen consumption (OC). Grade × day of display (DOD) interactions were detected for L*, a*, surface oxymyoglobin (OMb) and metmyoglobin (MMb) percentages, and visual panel surface redness and discoloration scores (P ≤ 0.02); however, no Grade × DOD interactions were observed for MRA or OC (P > 0.17). There were location main effect (LOC) × DOD interactions for L*, a*, surface MMb, visual panel surface redness and discoloration, and MRA (P ≤ 0.02). Distal steaks had lower L* values compared with the other locations (P < 0.01), which coincided with steaks being rated visually darker red (P < 0.01). Proximal steaks had greater a* values and had less surface discoloration than middle steaks (P < 0.05), which had an increased percentage of surface MMb (P ≤ 0.04). Distal and proximal steaks had increased MRA compared with middle steaks on days 0 and 4 (P < 0.05), and distal steaks had greater OC than the other locations throughout display (P < 0.01). There were fewer type I fibers at the proximal end with a greater percentage located at the middle and distal ends, and an increased percentage of type IIX fibers at the middle and proximal locations (P ≤ 0.01). Less type IIA fibers were detected at the middle LOC compared with the other two locations (P < 0.10). Larger type I, IIA, and IIX fibers were located at the proximal and middle locations compared with the distal LOC (P < 0.01). ST color and color-stability characteristics were influenced by DOD and LOC, which may partially be explained by differences in fiber types among locations.